The MPS2 SCC device is broadly the same for all FPGA images, but has
minor differences in the behaviour of the CFG registers depending on
the image. In many cases we don't really care about the functionality
controlled by these registers and a reads-as-written or similar
behaviour is sufficient for the moment.
For the AN536 the required behaviour is:
* A_CFG0 has CPU reset and halt bits
- implement as reads-as-written for the moment
* A_CFG1 has flash or ATCM address 0 remap handling
- QEMU doesn't model this; implement as reads-as-written
* A_CFG2 has QSPI select (like AN524)
- implemented (no behaviour, as with AN524)
* A_CFG3 is MCC_MSB_ADDR "additional MCC addressing bits"
- QEMU doesn't care about these, so use the existing
RAZ behaviour for convenience
* A_CFG4 is board rev (like all other images)
- no change needed
* A_CFG5 is ACLK frq in hz (like AN524)
- implemented as reads-as-written, as for other boards
* A_CFG6 is core 0 vector table base address
- implemented as reads-as-written for the moment
* A_CFG7 is core 1 vector table base address
- implemented as reads-as-written for the moment
Make the changes necessary for this; leave TODO comments where
appropriate to indicate where we might want to come back and
implement things like CPU reset.
The other aspects of the device specific to this FPGA image (like the
values of the board ID and similar registers) will be set via the
device's qdev properties.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-8-peter.maydell@linaro.org
An access fault is raised when the Access Flag is not set in the
looked-up PTE and the AFFD field is not set in the corresponding context
descriptor. This was already implemented for stage 2. Implement it for
stage 1 as well.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240213082211.3330400-1-luc.michel@amd.com
[PMM: tweaked comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a
non-secure EL2 virtual timer. We implemented the timer itself in the
CPU model, but never wired up its IRQ line to the GIC.
Wire up the IRQ line (this is always safe whether the CPU has the
interrupt or not, since it always creates the outbound IRQ line).
Report it to the guest via dtb and ACPI if the CPU has the feature.
The DTB binding is documented in the kernel's
Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml
and the ACPI table entries are documented in the ACPI specification
version 6.3 or later.
Because the IRQ line ACPI binding is new in 6.3, we need to bump the
FADT table rev to show that we might be using 6.3 features.
Note that exposing this IRQ in the DTB will trigger a bug in EDK2
versions prior to edk2-stable202311, for users who use the virt board
with 'virtualization=on' to enable EL2 emulation and are booting an
EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is
that EDK2 will assert on bootup:
ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48
If you see that assertion you should do one of:
* update your EDK2 binaries to edk2-stable202311 or newer
* use the 'virt-8.2' versioned machine type
* not use 'virtualization=on'
(The versions shipped with QEMU itself have the fix.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When destroying/unrefing resources, devices such as virtio-gpu-rutabaga
need to do their own bookkeeping (free rutabaga resources that are
associated with the virtio_gpu_simple_resource).
This commit adds a class method so that virtio-gpu-rutabaga can override
it in the next commit.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <b0a86630c4d601f3a269fd7e08cfefc13bd4e219.1706626470.git.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously not all references mentioned any spec version at all.
Given r3.1 is the current specification available for evaluation at
www.computeexpresslink.org update references to refer to that.
Hopefully this won't become a never ending job.
A few structure definitions have been updated to add new fields.
Defaults of 0 and read only are valid choices for these new DVSEC
registers so go with that for now.
There are additional error codes and some of the 'questions' in
the comments are resolved now.
Update documentation reference to point to the CXL r3.1 specification
with naming closer to what is on the cover.
For cases where there are structure version numbers, add defines
so they can be found next to the register definitions.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whilst the reported version was 1 so there should be no changes,
a couple of fields (where the value 0 was valid) were not
defined. Make those explicit and update references to be based
on CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Part of bringing all of CXL emulation inline with CXL r3.1.
No functional changes.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not actually implemented, but we need to reserve more space for
the larger version of the structure in CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Part of standardizing the QEMU code on CXL r3.1.
No fuctional changes as everything added is optional and
it is set as not implemented.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the current mdev_reg_read() implementation, it consistently returns
that the Media Status is Ready (01b). This was fine until commit
25a52959f9 ("hw/cxl: Add support for device sanitation") because the
media was presumed to be ready.
However, as per the CXL 3.0 spec "8.2.9.8.5.1 Sanitize (Opcode 4400h)",
during sanitation, the Media State should be set to Disabled (11b). The
mentioned commit correctly sets it to Disabled, but mdev_reg_read()
still returns Media Status as Ready.
To address this, update mdev_reg_read() to read register values instead
of returning dummy values.
Note that __toggle_media() managed to not only write something
that no one read, it did it to the wrong register storage and
so changed the reported mailbox size which was definitely not
the intent. That gets fixed as a side effect of allocating
separate state storage for this register.
Fixes: commit 25a52959f9 ("hw/cxl: Add support for device sanitation")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_parallel_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_serial_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_fdc_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
allow to enable or disable their SuperI/O functions. Add a convenience function
for implementing this in the VIA south bridges.
The naming of the functions is inspired by its memory_region_set_enabled()
pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
are able to relocate their SuperI/O functions. Add a convenience function for
implementing this in the VIA south bridges.
This convenience function relies on previous simplifications in exec/ioport
which avoids some duplicate synchronization of I/O port base addresses. The
naming of the function is inspired by its memory_region_set_address() pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
portio_list_add_1() creates a MemoryRegionPortioList instance which holds a
MemoryRegion `mr` and an array of MemoryRegionPortio elements named `ports`.
Each element in the array gets assigned the same value for its .base attribute.
The same value also ends up as the .addr attribute of `mr` due to the
memory_region_add_subregion() call. This means that all .base attributes are
the same as `mr.addr`.
The only usages of MemoryRegionPortio::base were in portio_read() and
portio_write(). Both functions get above MemoryRegionPortioList as their
opaque parameter. In both cases find_portio() can only return one of the
MemoryRegionPortio elements of the `ports` array. Due to above observation any
element will have the same .base value equal to `mr.addr` which is also
accessible.
Hence, `mrpio->mr.addr` is equivalent to `mrp->base` and
MemoryRegionPortio::base is redundant and can be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ParallelState::portio_list isn't used inside ParallelState context but only
inside ISAParallelState context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU populates the apic_state attribute of x86 CPUs if supported by real
hardware or if SMP is active. When handling interrupts, it just checks whether
apic_state is populated to route the interrupt to the PIC or to the APIC.
However, chapter 10.4.3 of [1] requires that:
When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent to an
IA-32 processor without an on-chip APIC.
This means that when apic_state is populated, QEMU needs to check for the
MSR_IA32_APICBASE_ENABLE flag in addition. Implement this which fixes some
real-world BIOSes.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual, Vol. 3A:
System Programming Guide, Part 1
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds support for x2APIC transitions when writing to
MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to
TCG_EXT_FEATURES.
The set_base in APICCommonClass now returns an integer to indicate error in
execution. apic_set_base return -1 on invalid APIC state transition,
accelerator can use this to raise appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-4-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit creates apic_register_read/write which are used by both
apic_mem_read/write for MMIO access and apic_msr_read/write for MSR access.
The apic_msr_read/write returns -1 on error, accelerator can use this to
raise the appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-2-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The __linux__ version of qemu_chr_open_pp_fd() tries to claim the
parport device with a PPCLAIM ioctl(). On success, it stores the file
descriptor in the chardev object, and returns success. On failure, it
closes the file descriptor, and returns failure.
chardev_new() then passes the Chardev to object_unref(). This duly
calls char_parallel_finalize(), which closes the file descriptor
stored in the chardev object. Since qemu_chr_open_pp_fd() didn't
store it, it's still zero, so this closes standard input. Ooopsie.
To demonstate, add a unit test. With the bug above unfixed, running
this test closes standard input. char_hotswap_test() happens to run
next. It opens a socket, duly gets file descriptor 0, and since it
tests for success with > 0 instead of >= 0, it fails.
The new unit test needs to be conditional exactly like the chardev it
tests. Since the condition is rather complicated, steal the solution
from the serial chardev: define HAVE_CHARDEV_PARALLEL in qemu/osdep.h.
This also permits simplifying chardev/meson.build a bit.
The bug fix is easy enough: store the file descriptor, and leave
closing it to char_parallel_finalize().
The next commit will fix char_hotswap_test()'s test for success.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240203080228.2766159-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test fixed up for BSDs, indentation fixed up, commit message improved]
Currently the DRQ IRQ is updated every time DMA data is sent/received which
is both inefficient and causes excessive logging of the DRQ state. Add a
new drq_state bool that only updates the DRQ IRQ if its state changes.
This commit adds the new drq_state bool to the migration state: since the
version number has already been increased earlier in the series, there is
no need to repeat it again here. The DRQ IRQ is (currently) only used for
PDMA transfers which already have a migration break in this series so
there are no problems setting its value post-load.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-87-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The IRQ represented by irq_data is actually the DRQ (DMA request) line so rename
it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-86-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
According to the datasheet the previous ESP command remains in the ESP_CMD
register, which caused a problem when consecutive TI commands were issued as
it becomes impossible for the state machine to know when the first TI
command finishes.
This was the original reason for introducing the ti_cmd field which kept
track of the last written command for this purpose. However closer reading
of the datasheet shows that a TI command that terminates due to a change of
SCSI target phase resets the ESP_CMD register to zero which solves this
problem.
Now that this has been fixed in the previous commit, remove the unneeded
ti_cmd field and access the ESP_CMD register directly instead. Bump the
vmstate_esp version to indicate that the ti_cmd field is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-64-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This field is currently used to handle deferred interrupts for the DATA IN phase
but the code will soon be updated to do the same for the DATA OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-58-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Note that this is a migration break for the q800 machine because the extra PDMA
information is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-57-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in write_response_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-55-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in satn_stop_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-53-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The special logic in satn_pdma_cb() is now no longer required since esp_do_dma()
can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-50-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This can now be handled by the existing do_dma_pdma_cb() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-37-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
We need values 0-3 for TCG_TYPE_I128 on 32-bit hosts.
Cc: qemu-stable@nongnu.org
Fixes: 43eef72f41 ("tcg: Add temp allocation for TCGv_i128")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2159
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
=RA0B
-----END PGP SIGNATURE-----
Merge tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Enhancements and fixes
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
# X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
# CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
# =RA0B
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 23:47:13 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa/machine: Load 64-bit firmware on 64-bit machines
target/hppa: Update SeaBIOS-hppa to version 16
hw/net/tulip: add chip status register values
target/hppa: PDC_BTLB_INFO uses 32-bit ints
target/hppa: Allow read-access to PSW with rsm 0,reg instruction
lasi: Add reset I/O ports for LASI audio and FDC
target/hppa: Implement do_transaction_failed handler for I/O errors
lasi: allow access to LAN MAC address registers
hw/pci-host/astro: Implement Hard Fail and Soft Fail mode
hw/pci-host/astro: Avoid aborting on access failure
target/hppa: Add "diag 0x101" for console output support
disas/hppa: Add disassembly for qemu specific instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmXGMNUACgkQvobrtBUQ
T998JQ//SqQ3L/AZmhE5cIwZ1XipSMMZ/yEoVIyniA3tL41S7Oimj3O9XvY68TEG
nnj9Oh+zOlVLxauTHAczveJ7z+XfonQZS3HrbGRUTHU+ezGVjyM618e/h9pSQtYI
+CCkrjtey1NoT42/um4D/bKg/B2XQeulS+pD12Z9l5zbqEZiw0R9+UwVIJ52G811
5UQgIjJ7GNFzalxqiMCkGc0nTyU8keEXQJcdZ4droo42DnU4pZeQWGDimzP61JnW
1Crm6aZSuUriUbVmxJde+2eEdPSR4rr/yQ4Pw06hoi1QJALSgGYtOTo8+qsyumHd
us/2ouMrxOMdsIk4ViAkSTiaje9agPj84VE1Z229Y/uqZcEAuX572n730/kkzqUv
ZDKxMz0v3rzpkjFmsgj5D4yqJaQp4zn1zYm98ld7HWJVIOf3GSvpaNg9J6jwN7Gi
HKKkvYns9pxg3OSx++gqnM32HV6nnMDFiddipl/hTiUsnNlnWyTDSvJoNxIUU5+l
/uEbbdt8xnxx1JP0LiOhgmz6N6FU7oOpaPuJ5CD8xO2RO8D1uBRvmpFcdOTDAfv0
uYdjhKBI+quKjE64p7gNWYCoqZtipRIJ6AY2VaPU8XHx8GvGFwBLX64oLYiYtrBG
gkv3NTHRkMhQw9cGQcZIgZ+OLU+1eNF+m9EV7LUjuKl0HWC3Vjs=
=61zI
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
- LUKS support for detached headers
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmXGMNUACgkQvobrtBUQ
# T998JQ//SqQ3L/AZmhE5cIwZ1XipSMMZ/yEoVIyniA3tL41S7Oimj3O9XvY68TEG
# nnj9Oh+zOlVLxauTHAczveJ7z+XfonQZS3HrbGRUTHU+ezGVjyM618e/h9pSQtYI
# +CCkrjtey1NoT42/um4D/bKg/B2XQeulS+pD12Z9l5zbqEZiw0R9+UwVIJ52G811
# 5UQgIjJ7GNFzalxqiMCkGc0nTyU8keEXQJcdZ4droo42DnU4pZeQWGDimzP61JnW
# 1Crm6aZSuUriUbVmxJde+2eEdPSR4rr/yQ4Pw06hoi1QJALSgGYtOTo8+qsyumHd
# us/2ouMrxOMdsIk4ViAkSTiaje9agPj84VE1Z229Y/uqZcEAuX572n730/kkzqUv
# ZDKxMz0v3rzpkjFmsgj5D4yqJaQp4zn1zYm98ld7HWJVIOf3GSvpaNg9J6jwN7Gi
# HKKkvYns9pxg3OSx++gqnM32HV6nnMDFiddipl/hTiUsnNlnWyTDSvJoNxIUU5+l
# /uEbbdt8xnxx1JP0LiOhgmz6N6FU7oOpaPuJ5CD8xO2RO8D1uBRvmpFcdOTDAfv0
# uYdjhKBI+quKjE64p7gNWYCoqZtipRIJ6AY2VaPU8XHx8GvGFwBLX64oLYiYtrBG
# gkv3NTHRkMhQw9cGQcZIgZ+OLU+1eNF+m9EV7LUjuKl0HWC3Vjs=
# =61zI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 14:04:05 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
tests: Add case for LUKS volume with detached header
crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS
block: Support detached LUKS header creation using qemu-img
block: Support detached LUKS header creation using blockdev-create
crypto: Modify the qcrypto_block_create to support creation flags
qapi: Make parameter 'file' optional for BlockdevCreateOptionsLUKS
crypto: Support LUKS volume with detached header
io: add trace event when cancelling TLS handshake
chardev: close QIOChannel before unref'ing
docs: re-generate x86_64 ABI compatibility CSV
docs: fix highlighting of CPU ABI header rows
scripts: drop comment about autogenerated CPU API file
softmmu: remove obsolete comment about libvirt timeouts
ui: drop VNC feature _MASK constants
qemu_init: increase NOFILE soft limit on POSIX
crypto: Introduce SM4 symmetric cipher algorithm
meson: sort C warning flags alphabetically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use of String is problematic, because it results in awkward interface
documentation. The previous commit cleaned up one instance.
Move String out of common.json next to its remaining users in net.json
to discourage reuse elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-15-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
SocketAddress branch @fd is documented in enum SocketAddressType,
unlike the other branches. That's because the branch's type is String
from common.json.
Use a local copy of String, so we can put the documentation in the
usual place.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The upcoming syscall catchpoint support needs to get control on syscall
entry and return. Provide the necessary hooks for that, which are
no-ops for now.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-13-alex.bennee@linaro.org>
