Inject poison using QMP command cxl-inject-poison to add an entry to the
poison list.
For now, the poison is not returned CXL.mem reads, but only via the
mailbox command Get Poison List. So a normal memory read to an address
that is on the poison list will not yet result in a synchronous exception
(and similar for partial cacheline writes).
That is left for a future patch.
See CXL rev 3.0, sec 8.2.9.8.4.1 Get Poison list (Opcode 4300h)
Kernel patches to use this interface here:
https://lore.kernel.org/linux-cxl/cover.1665606782.git.alison.schofield@intel.com/
To inject poison using QMP (telnet to the QMP port)
{ "execute": "qmp_capabilities" }
{ "execute": "cxl-inject-poison",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"start": 2048,
"length": 256
}
}
Adjusted to select a device on your machine.
Note that the poison list supported is kept short enough to avoid the
complexity of state machine that is needed to handle the MORE flag.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230526170010.574-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Analysis of the MacOS toolbox ROM code shows that on startup it attempts 2
separate reads of the seconds registers with commands 0x9d...0x91 followed by
0x8d..0x81 without resetting the command to its initial value. The PRAM seconds
value is only accepted when the values of the 2 separate reads match.
From this we conclude that bit 4 of the rtc command is not decoded or we don't
care about its value when reading the PRAM seconds registers. Implement this
decoding change so that both reads return successfully which allows the MacOS
toolbox ROM to correctly set the date/time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A comparison between the rtc command table included in the comment and the code
itself shows that the decoding for PRAM addresses 0x0 to 0xf is being done on
the raw command, and not the shifted version held in value.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the macfb device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead use the qdev_get_child_bus() function which is intended for this exact
purpose.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the mac-nubus-bridge device to use
object_initialize_child() and map the Nubus address space using
memory_region_add_subregion() instead of sysbus_mmio_map().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the SWIM device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the ESP device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the escc_orgate device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the ESCC device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the dp8393x device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is to enable them to be used outside of dp8393x.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the VIA2 device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the VIA1 device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current use of aliased memory regions causes us 2 problems: firstly the
output of "info qom-tree" is absolutely huge and difficult to read, and
secondly we have already reached the internal limit for memory regions as
adding any new memory region into the mac-io region causes QEMU to assert
with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE'
failed".
Implement the mac-io region aliasing using a single IO memory region that
applies IO_SLICE_MASK representing the maximum size of the aliased region and
then forwarding the access to the existing mac-io memory region using the
address space API.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move all devices from the IO region to within the container in preparation
for updating the IO aliasing mechanism.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the GLUE device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The use of the DEFINE_TYPES() macro will soon be recommended over the use of
calling type_init() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will allow the q800-glue.h header to be included separately so that the
GLUE device can be referenced externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-8-mark.cave-ayland@ilande.co.uk>
[lv: update comment]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the CPU to use object_initialize_child()
followed by a separate realisation.
Restrict valid CPU types to m68040.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-6-mark.cave-ayland@ilande.co.uk>
[lv: update commit message]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will enable us later to distinguish between QOM initialisation and machine
initialisation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This provides an overall container and owner for Machine-related objects such
as MemoryRegions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This brings GLUEState in line with our current QOM guidelines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Ensure there is a space before the final closing brace for all global
properties.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230612223456.33824-5-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 3/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE
really being SoC-specific]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.
This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.
The wake bit can be configured as an interrupt source. Support this
mechanism as well.
Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nrf51_timer has a free-running counter which we implement using
the pattern of using two fields (update_counter_ns, counter) to track
the last point at which we calculated the counter value, and the
counter value at that time. Then we can find the current counter
value by converting the difference in wall-clock time between then
and now to a tick count that we need to add to the counter value.
Unfortunately the nrf51_timer's implementation of this has a bug
which means it loses time every time update_counter() is called.
After updating s->counter it always sets s->update_counter_ns to
'now', even though the actual point when s->counter hit the new value
will be some point in the past (half a tick, say). In the worst case
(guest code in a tight loop reading the counter, icount mode) the
counter is continually queried less than a tick after it was last
read, so s->counter never advances but s->update_counter_ns does, and
the guest never makes forward progress.
The fix for this is to only advance update_counter_ns to the
timestamp of the last tick, not all the way to 'now'. (This is the
pattern used in hw/misc/mps2-fpgaio.c's counter.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org
QEMU allows qemu_irq lines to transfer arbitrary integers. However
the convention is that for a simple IRQ line the values transferred
are always 0 and 1. The A10 SD controller device instead assumes a
0-vs-non-0 convention, which happens to work with the interrupt
controller it is wired up to.
Coerce the value to boolean to follow our usual convention.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-3-peter.maydell@linaro.org
In commit 2c5fa0778c we fixed an endianness bug in the Allwinner
A10 PIC model; however in the process we introduced a regression.
This is because the old code was robust against the incoming 'level'
argument being something other than 0 or 1, whereas the new code was
not.
In particular, the allwinner-sdhost code treats its IRQ line
as 0-vs-non-0 rather than 0-vs-1, so when the SD controller
set its IRQ line for any reason other than transmit the
interrupt controller would ignore it. The observed effect
was a guest timeout when rebooting the guest kernel.
Handle level values other than 0 or 1, to restore the old
behaviour.
Fixes: 2c5fa0778c ("hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()")
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230606104609.3692557-2-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZIwysgAKCRBAov/yOSY+
39FYA/465KtY2jDt4xG6AdwZDHckfxZQWlrfhyZvtapOkUG4AprOBV2nSS/ukyD4
V8bg2/6cLS0GRKfDsqA3DcxSASWCAggIU4fTSj+DlYOZhNUIq14qzwqciZnO5CIH
QDczSqu2LKRdP9j6MCtzIaZq/8pPDcOlgm7Dyct/kDo/64E2sg==
=rD4j
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230616' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230616
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZIwysgAKCRBAov/yOSY+
# 39FYA/465KtY2jDt4xG6AdwZDHckfxZQWlrfhyZvtapOkUG4AprOBV2nSS/ukyD4
# V8bg2/6cLS0GRKfDsqA3DcxSASWCAggIU4fTSj+DlYOZhNUIq14qzwqciZnO5CIH
# QDczSqu2LKRdP9j6MCtzIaZq/8pPDcOlgm7Dyct/kDo/64E2sg==
# =rD4j
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 12:00:18 PM CEST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230616' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix CSR.DMW0-3.VSEG check
hw/loongarch: Supplement cpu topology arguments
hw/loongarch: Add numa support
hw/intc: Set physical cpuid route for LoongArch ipi device
hw/loongarch/virt: Add cpu arch_id support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=543t
-----END PGP SIGNATURE-----
Merge tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu into staging
xenpvh5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh
# rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM
# zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/
# SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/
# FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd
# Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv
# T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o
# e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k
# Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG
# pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR
# ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK
# g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w=
# =543t
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 01:48:20 AM CEST
# gpg: using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [unknown]
# gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu:
test/qtest: add xepvh to skip list for qtest
meson.build: enable xenpv machine build for ARM
hw/arm: introduce xenpvh machine
meson.build: do not set have_xen_pci_passthrough for aarch64 targets
hw/xen/xen-hvm-common: Use g_new and error_report
hw/xen/xen-hvm-common: skip ioreq creation on ioreq registration failure
include/hw/xen/xen_common: return error from xen_create_ioreq_server
xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common
hw/i386/xen/xen-hvm: move x86-specific fields out of XenIOState
hw/i386/xen: rearrange xen_hvm_init_pc
hw/i386/xen/: move xen-mapcache.c to hw/xen/
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Supplement LoongArch cpu topology arguments, including support socket
and threads per core.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230613123251.2471878-1-zhaotianrui@loongson.cn>
1. Implement some functions for LoongArch numa support;
2. Implement fdt_add_memory_node() for fdt;
3. build_srat() fills node_id and adds build numa memory.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230613122613.2471743-1-zhaotianrui@loongson.cn>
LoongArch ipi device uses physical cpuid to route to different
vcpus rather logical cpuid, and the physical cpuid is the same
with cpuid in acpi dsdt and srat table.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230613120552.2471420-3-zhaotianrui@loongson.cn>
With acpi madt table, there is cpu physical coreid, which may
be different with logical id in qemu. This patch adds cpu arch_id
support, and fill madt table with arch_id. For the present cpu
arch_id is still equal to logical id.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230613120552.2471420-2-zhaotianrui@loongson.cn>
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.
Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.
Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
-chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-machine tpm-base-addr=0x0c000000 \
swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
mkdir /tmp/vtpm2
swtpm socket --tpmstate dir=/tmp/vtpm2 \
--ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Replace g_malloc with g_new and perror with error_report.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
On ARM it is possible to have a functioning xenpv machine with only the
PV backends and no IOREQ server. If the IOREQ server creation fails continue
to the PV backends initialization.
Also, moved the IOREQ registration and mapping subroutine to new function
xen_do_ioreq_register().
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
This patch does following:
1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in
preparation for moving most of xen-hvm code to an arch-neutral location,
move the x86-specific portion of xen_set_memory to arch_xen_set_memory.
Also, move handle_vmport_ioreq to arch_handle_ioreq.
2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c
Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to
hw/xen/xen-hvm-common.c. These common functions are useful for creating
an IOREQ server.
xen_hvm_init_pc() contains the architecture independent code for creating
and mapping a IOREQ server, connecting memory and IO listeners, initializing
a xen bus and registering backends. Moved this common xen code to a new
function xen_register_ioreq() which can be used by both x86 and ARM machines.
Following functions are moved to hw/xen/xen-hvm-common.c:
xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(),
xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(),
xen_device_realize(), xen_device_unrealize(),
cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(),
do_outp(), rw_phys_req_item(), read_phys_req_item(),
write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(),
cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(),
handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(),
xen_hvm_change_state_handler(), xen_exit_notifier(),
xen_map_ioreq_server(), destroy_hvm_domain() and
xen_shutdown_fatal_error()
3. Removed static type from below functions:
1. xen_region_add()
2. xen_region_del()
3. xen_io_add()
4. xen_io_del()
5. xen_device_realize()
6. xen_device_unrealize()
7. xen_hvm_change_state_handler()
8. cpu_ioreq_pio()
9. xen_exit_notifier()
4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
In preparation to moving most of xen-hvm code to an arch-neutral location, move:
- shared_vmport_page
- log_for_dirtybit
- dirty_bitmap
- suspend
- wakeup
out of XenIOState struct as these are only used on x86, especially the ones
related to dirty logging.
Updated XenIOState can be used for both aarch64 and x86.
Also, remove free_phys_offset as it was unused.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In preparation to moving most of xen-hvm code to an arch-neutral location,
move non IOREQ references to:
- xen_get_vmport_regs_pfn
- xen_suspend_notifier
- xen_wakeup_notifier
- xen_ram_init
towards the end of the xen_hvm_init_pc() function.
This is done to keep the common ioreq functions in one place which will be
moved to new function in next patch in order to make it common to both x86 and
aarch64 machines.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Paul Durrant <paul@xen.org>
xen-mapcache.c contains common functions which can be used for enabling Xen on
aarch64 with IOREQ handling. Moving it out from hw/i386/xen to hw/xen to make it
accessible for both aarch64 and x86.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cortex A7 CPUs with an FPU implementing VFPv4 without NEON support
have 16 64-bit FPU registers and not 32 registers. Let users set the
number of VFP registers with a CPU property.
The primary use case of this property is for the Cortex A7 of the
Aspeed AST2600 SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Most of the Aspeed machines use the UART5 device for the boot console,
and QEMU connects the first serial Chardev to this SoC device for this
purpose. See routine connect_serial_hds_to_uarts().
Nevertheless, some machines use another boot console, such as the fuji,
and commit 5d63d0c76c ("hw/arm/aspeed: Allow machine to set UART
default") introduced a SoC class attribute 'uart_default' and property
to be able to change the boot console device. It was later changed by
commit d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines").
The "bmc-console" machine option goes a step further and lets the user define
the UART device from the QEMU command line without introducing a new
machine definition. For instance, to use device UART3 (mapped on
/dev/ttyS2 under Linux) instead of the default UART5, one would use :
-M ast2500-evb,bmc-console=uart3
Cc: Abhishek Singh Dagur <abhishek@drut.io>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
