Rather than having an else leg for the missing compiler case we can
simply just not add the test - the same way as is done for ppc64le.
Also while we are at it fix up the compiler invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-11-alex.bennee@linaro.org>
Although running on aarch64 hardware we can still target 32bit builds
with a cross compiler and run the resulting binaries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-10-alex.bennee@linaro.org>
Some HW can run multiple architecture profiles so we can install a
secondary runner to build and run tests for those profiles. This
allows setting up secondary service.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-9-alex.bennee@linaro.org>
At least the current crop of Aarch64 HW can support running 32 bit EL0
code. Before we can build and test we need a minimal set of packages
installed. We can't use "apt build-dep" because it currently gets
confused trying to keep two sets of build-deps installed at once.
Instead we install a minimal set of libraries that will allow us to
continue.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-8-alex.bennee@linaro.org>
Cross building QEMU for riscv64 still involves messing about with sid
and ports. However for building tests we can have a slimmer compiler
only container which should be more stable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-7-alex.bennee@linaro.org>
A later compiler is needed for some upcomming tests so we might as
well migrate to an lcitool generated docker file.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-6-alex.bennee@linaro.org>
Using lcitool update debian-arm64-cross to a Debian 11 based system.
As a result we can drop debian-arm64-test-cross just for building
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-5-alex.bennee@linaro.org>
We will need an update shortly for some new images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-4-alex.bennee@linaro.org>
The alpine image doesn't have a standard useradd binary so disable
this convenience feature for it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-3-alex.bennee@linaro.org>
This was broken in the re-factor:
e86c9a64f4 ("tests/docker/Makefile.include: add a generic docker-run target")
Rather than unwind the changes just apply the filters to the total set
of available images and tests. That way we don't inadvertently build
images only not to use them later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-2-alex.bennee@linaro.org>
Eduardo Habkost has left Red Hat and has other daily responsibilities to
attend to. In order to stop spamming him on every series, remove him as
"Reviewer" for the python/ library dir and add Beraldo Leal instead.
For the "python scripts" stanza (which is separate due to level of
support), replace Eduardo as maintainer with myself.
(Thanks for all of your hard work, Eduardo!)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Eduardo Habkost <eduardo@habkost.net>
Message-id: 20220208000525.2601011-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Setuptools v60 and later include a bundled version of distutils, a
deprecated standard library scheduled for removal in future versions of
Python. Setuptools v60 is only possible to install for Python 3.7 and later.
Python has a distutils.sysconfig.get_python_lib() function that returns
'/usr/lib/pythonX.Y' on posix systems. RPM-based systems actually use
'/usr/lib64/pythonX.Y' instead, so Fedora patches stdlib distutils for
Python 3.7 and Python 3.8 to return the correct value.
Python 3.9 and later introduce a sys.platlibdir property, which returns
the correct value on RPM-based systems.
The change to a distutils package not provided by Fedora on Python 3.7
and 3.8 causes a regression in distutils.sysconfig.get_python_lib() that
ultimately causes false positives to be emitted by pylint, because it
can no longer find the system source libraries.
Many Python tools are fairly aggressive about updating setuptools
packages, and so even though this package is a fair bit newer than
Python 3.7/3.8, it's not entirely unreasonable for a given user to have
such a modern package with a fairly old Python interpreter.
Updates to Python 3.7 and Python 3.8 are being produced for Fedora which
will fix the problem on up-to-date systems. Until then, we can force the
loading of platform-provided distutils when running the pylint
test. This is the least-invasive yet most comprehensive fix.
References:
https://github.com/pypa/setuptools/pull/2896https://github.com/PyCQA/pylint/issues/5704https://github.com/pypa/distutils/issues/110
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220204221804.2047468-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When invoking setup.py directly, the default behavior for 'install' is
to run the bdist_egg installation hook, which is ... actually deprecated
by setuptools. It doesn't seem to work quite right anymore.
By contrast, 'pip install' will invoke the bdist_wheel hook
instead. This leads to differences in behavior for the two approaches. I
advocate using pip in the documentation in this directory, but the
'setup.py' which has been used for quite a long time in the Python world
may deceptively appear to work at first glance.
Add an error message that will save a bit of time and frustration
that points the user towards using the supported installation
invocation.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220207213039.2278569-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When running QMP commands with very large response payloads, it is often
not easy to spot the info you want. If we can save the response to a
file then tools like 'grep' or 'jq' can be used to extract information.
For convenience of processing, we merge the QMP command and response
dictionaries together:
{
"arguments": {},
"execute": "query-kvm",
"return": {
"enabled": false,
"present": true
}
}
Example usage
$ ./scripts/qmp/qmp-shell-wrap -l q.log -p -- ./build/qemu-system-x86_64 -display none
Welcome to the QMP low-level shell!
Connected
(QEMU) query-kvm
{
"return": {
"enabled": false,
"present": true
}
}
(QEMU) query-mice
{
"return": [
{
"absolute": false,
"current": true,
"index": 2,
"name": "QEMU PS/2 Mouse"
}
]
}
$ jq --slurp '. | to_entries[] | select(.value.execute == "query-kvm") |
.value.return.enabled' < q.log
false
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220128161157.36261-3-berrange@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
With the current 'qmp-shell' tool developers must first spawn QEMU with
a suitable -qmp arg and then spawn qmp-shell in a separate terminal
pointing to the right socket.
With 'qmp-shell-wrap' developers can ignore QMP sockets entirely and
just pass the QEMU command and arguments they want. The program will
listen on a UNIX socket and tell QEMU to connect QMP to that.
For example, this:
# qmp-shell-wrap -- qemu-system-x86_64 -display none
Is roughly equivalent of running:
# qemu-system-x86_64 -display none -qmp qmp-shell-1234 &
# qmp-shell qmp-shell-1234
Except that 'qmp-shell-wrap' switches the socket peers around so that
it is the UNIX socket server and QEMU is the socket client. This makes
QEMU reliably go away when qmp-shell-wrap exits, closing the server
socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220128161157.36261-2-berrange@redhat.com
[Edited for rebase. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
-----BEGIN PGP SIGNATURE-----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=PeCY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging
This misc series of changes:
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
# gpg: Signature made Thu 17 Feb 2022 11:57:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-next-pull-request:
docs: expand firmware descriptor to allow flash without NVRAM
MAINTAINERS: take over seccomp from Eduardo Otubo
seccomp: block setns, unshare and execveat syscalls
seccomp: block use of clone3 syscall
seccomp: fix blocking of process spawning
seccomp: add unit test for seccomp filtering
seccomp: allow action to be customized per syscall
block: print the server key type and fingerprint on failure
block: support sha256 fingerprint with pre-blockdev options
block: better document SSH host key fingerprint checking
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-options.hx contains grammar that a native English-speaking
person would never use.
Replace "This option defines where is connected the drive" by
"This option defines where the drive is connected".
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/853
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220202143422.912070-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----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=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the macro for going from I2CSlave to EEPROMState.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220119214329.2557049-1-venture@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The last use of ENV_OFFSET was removed in 5e1401969b
("cpu: Move icount_decr to CPUNegativeOffsetState");
the commit of target/rx came in just afterward.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220203001252.37982-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no 'vr' field in AVRCPUClass.
Likely a copy/paste typo from CRISCPUClass ;)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220122001036.83267-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For the users, it looks a little bit weird that capstone and slirp are
not disabled automatically if they run the configure script with the
"--without-default-features" option, so let's do that now.
Note: fdt is *not* changed accordingly since this affects the targets
that we can build, so disabling fdt automatically here might have
unexpected side-effects for the users.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220221090647.150184-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* MAINTAINERS file updates
* Mark remaining global TypeInfo instances as const
* checkpatch: Ensure that TypeInfos are const
* arm hvf: Handle unknown ID registers as RES0
* Make KVM -cpu max exactly like -cpu host
* Fix '-cpu max' for HVF
* Support PAuth extension for hvf
* Kconfig: Add I2C_DEVICES device group
* Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c bus
* hw/arm/armv7m: Handle disconnected clock inputs
* osdep.h: pull out various things into new header files
* hw/timer: fix a9gtimer vmstate
* hw/arm: add initial mori-bmc board
* ui/cocoa: Remove allowedFileTypes restriction in SavePanel
* ui/cocoa: Do not alert even without block devices
* ui/cocoa: Fix the leak of qemu_console_get_label
-----BEGIN PGP SIGNATURE-----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=pLon
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220221-1' into staging
arm, cocoa and misc:
* MAINTAINERS file updates
* Mark remaining global TypeInfo instances as const
* checkpatch: Ensure that TypeInfos are const
* arm hvf: Handle unknown ID registers as RES0
* Make KVM -cpu max exactly like -cpu host
* Fix '-cpu max' for HVF
* Support PAuth extension for hvf
* Kconfig: Add I2C_DEVICES device group
* Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c bus
* hw/arm/armv7m: Handle disconnected clock inputs
* osdep.h: pull out various things into new header files
* hw/timer: fix a9gtimer vmstate
* hw/arm: add initial mori-bmc board
* ui/cocoa: Remove allowedFileTypes restriction in SavePanel
* ui/cocoa: Do not alert even without block devices
* ui/cocoa: Fix the leak of qemu_console_get_label
# gpg: Signature made Mon 21 Feb 2022 13:30:45 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220221-1: (25 commits)
ui/cocoa: Fix the leak of qemu_console_get_label
ui/cocoa: Do not alert even without block devices
ui/cocoa: Remove allowedFileTypes restriction in SavePanel
hw/arm: add initial mori-bmc board
hw/timer: fix a9gtimer vmstate
MAINTAINERS: Add Akihiko Odaki to macOS-relateds
include: Move hardware version declarations to new qemu/hw-version.h
include: Move qemu_[id]cache_* declarations to new qemu/cacheinfo.h
include: Move QEMU_MAP_* constants to mmap-alloc.h
include: Move qemu_mprotect_*() to new qemu/mprotect.h
include: Move qemu_madvise() and related #defines to new qemu/madvise.h
hw/arm/armv7m: Handle disconnected clock inputs
Kconfig: Add 'imply I2C_DEVICES' on boards with available i2c bus
Kconfig: Add I2C_DEVICES device group
target/arm: Support PAuth extension for hvf
target/arm: Fix '-cpu max' for HVF
target/arm: Unindent unnecessary else-clause
target/arm: Make KVM -cpu max exactly like -cpu host
target/arm: Use aarch64_cpu_register() for 'host' CPU type
target/arm: Move '-cpu host' code to cpu64.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
setAllowedFileTypes is deprecated in macOS 12.
Per Akihiko Odaki [*]:
An image file, which is being chosen by the panel, can be a
raw file and have a variety of file extensions and many are not
covered by the provided list (e.g. "udf"). Other platforms like
GTK can provide an option to open a file with an extension not
listed, but Cocoa can't. It forces the user to rename the file
to give an extension in the list. Moreover, Cocoa does not tell
which extensions are in the list so the user needs to read the
source code, which is pretty bad.
Since this code is harming the usability rather than improving it,
simply remove the [NSSavePanel allowedFileTypes:] call, fixing:
[2789/6622] Compiling Objective-C object libcommon.fa.p/ui_cocoa.m.o
ui/cocoa.m:1411:16: error: 'setAllowedFileTypes:' is deprecated: first deprecated in macOS 12.0 - Use -allowedContentTypes instead [-Werror,-Wdeprecated-declarations]
[openPanel setAllowedFileTypes: supportedImageFileTypes];
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSSavePanel.h:215:49: note: property 'allowedFileTypes' is declared deprecated here
@property (nullable, copy) NSArray<NSString *> *allowedFileTypes API_DEPRECATED("Use -allowedContentTypes instead", macos(10.3,12.0));
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/AppKit.framework/Headers/NSSavePanel.h:215:49: note: 'setAllowedFileTypes:' has been explicitly marked deprecated here
FAILED: libcommon.fa.p/ui_cocoa.m.o
[*] https://lore.kernel.org/qemu-devel/4dde2e66-63cb-4390-9538-c032310db3e3@gmail.com/
Suggested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220215080307.69550-11-f4bug@amsat.org
Reviewed by: Cameron Esfahani <dirty@apple.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the BMC attached to the OpenBMC Mori board.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Ilkyun Choi <ikchoi@google.com>
Message-id: 20220208233104.284425-1-venture@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A9 gtimer includes global control field and number of per-cpu fields.
But only per-cpu ones are migrated. This patch adds a subsection for
global control field migration.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-id: 164422345976.2186660.1104517592452494510.stgit@pasha-ThinkPad-X280
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files. Move it out from osdep.h into a new
qemu/hw-version.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
The qemu_icache_linesize, qemu_icache_linesize_log,
qemu_dcache_linesize, and qemu_dcache_linesize_log variables are not
used in many files. Move them out of osdep.h to a new
qemu/cacheinfo.h, and document them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-5-peter.maydell@linaro.org
The QEMU_MAP_* constants are used only as arguments to the
qemu_ram_mmap() function. Move them to mmap-alloc.h, where that
function's prototype is defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-4-peter.maydell@linaro.org
The qemu_mprotect_*() family of functions are used in very few files;
move them from osdep.h to a new qemu/mprotect.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-3-peter.maydell@linaro.org
The function qemu_madvise() and the QEMU_MADV_* constants associated
with it are used in only 10 files. Move them out of osdep.h to a new
qemu/madvise.h header that is included where it is needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-2-peter.maydell@linaro.org
In the armv7m object, handle clock inputs that aren't connected.
This is always an error for 'cpuclk'. For 'refclk' it is OK for this
to be disconnected, but we need to handle it by not trying to connect
a sourceless-clock to the systick device.
This fixes a bug where on the mps2-an521 and similar boards (which
do not have a refclk) the systick device incorrectly reset with
SYST_CSR.CLKSOURCE 0 ("use refclk") rather than 1 ("use CPU clock").
Cc: qemu-stable@nongnu.org
Reported-by: Richard Petri <git@rpls.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208171643.3486277-1-peter.maydell@linaro.org
For arm boards with an i2c bus which a user could reasonably
want to plug arbitrary devices, add 'imply I2C_DEVICES' to the
Kconfig stanza.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20220208155911.3408455-3-peter.maydell@linaro.org
Currently there is no way for a board model's Kconfig stanza to
say "I have an i2c bus which the user can plug an i2c device into,
build all the free-standing i2c devices". The Kconfig mechanism
for this is the "device group". Add an I2C_DEVICES group along
the same lines as the existing PCI_DEVICES. Simple free-standing
i2c devices which a user might plausibly want to be able to
plug in on the QEMU commandline should have
default y if I2C_DEVICES
and board models which have an i2c bus that is user-accessible
should use
imply I2C_DEVICES
to cause those pluggable devices to be built.
In this commit we mark only a fairly conservative set of i2c devices
as belonging to the I2C_DEVICES group: the simple sensors and RTCs
(not including PMBus devices or devices which need GPIO lines to be
connected).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
Currently we don't allow guests under hvf to use the PAuth extension,
because we didn't have any special code to handle that, and therefore
in arm_cpu_pauth_finalize() we will sanitize the ID_AA64ISAR1 value
the guest sees to clear the PAuth related fields.
Add support for this in the same way that KVM does it, by defaulting
to "PAuth enabled" if the host CPU has it and allowing the user to
disable it via '-cpu pauth=no' on the command line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-7-peter.maydell@linaro.org
Currently when using hvf we mishandle '-cpu max': we fall through to
the TCG version of its initfn, which then sets a lot of feature bits
that the real host CPU doesn't have. The hvf accelerator code then
exposes these bogus ID register values to the guest because it
doesn't check that the host really has the features.
Make '-cpu host' be like '-cpu max' for hvf, as we do with kvm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-6-peter.maydell@linaro.org
Now that the if() branch of the condition in aarch64_max_initfn()
returns early, we don't need to keep the rest of the code in
the function inside an else block. Remove the else, unindenting
that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-5-peter.maydell@linaro.org
Currently for KVM the intention is that '-cpu max' and '-cpu host'
are the same thing, but because we did this with two separate
pieces of code they have got a little bit out of sync. Specifically,
'max' has a 'sve-max-vq' property, and 'host' does not.
Bring the two together by having the initfn for 'max' actually
call the initfn for 'host'. This will result in 'max' no longer
exposing the 'sve-max-vq' property when using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-4-peter.maydell@linaro.org
Use the aarch64_cpu_register() machinery to register the 'host' CPU
type. This doesn't gain us anything functionally, but it does mean
that the code for initializing it looks more like that for the other
CPU types, in that its initfn then doesn't need to call
arm_cpu_post_init() (because aarch64_cpu_instance_init() does that
for it).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-3-peter.maydell@linaro.org
Now that KVM has dropped AArch32 host support, the 'host' CPU type is
always AArch64, and we can move it to cpu64.c. This move will allow
us to share code between it and '-cpu max', which should behave
the same as '-cpu host' when using KVM or HVF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-2-peter.maydell@linaro.org
Now that all static TypeInfo instances are declared const, prevent that
new non-const instances are created.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220117145805.173070-3-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
