If the user didn't specify reserved_va, there's an else for 64-bit host
32-bit (or fewer) target to reserve 32-bits of address space. Update the
comments to reflect this, and rejustify comment to 80 columns.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Declare 'have_guest_base' in "user/guest-base.h".
Very few files require this header, so explicitly include
it there instead of "exec/cpu-all.h" which is used in many
source files.
Assert this user-specific header is only included from user
emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-23-philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Use glib allocation as recommended by the coding convention
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Message-Id: <20240317171747.1642207-1-phind.uet@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Save target's siginfo into gdbserver_state so it can be used later, for
example, in any stub that requires the target's si_signo and si_code.
This change affects only linux-user mode.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-4-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Rename gdb_handlesig_reason back to gdb_handlesig. There is no need to
add a wrapper for gdb_handlesig and rename it when a new parameter is
added.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-2-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires post-fork message
exchange between the parent and the child. Prepare gdbserver_fork() for
this purpose. Rename it to gdbserver_fork_end() to better reflect its
purpose.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-9-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-8-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-7-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing when
fork() is about to happen in order to initialize its state. Add a hook
for that.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-6-alex.bennee@linaro.org>
Currently ts_tid contains the parent tid after fork(), which is not
correct. So far it has not affected anything, but the upcoming
follow-fork-mode child support relies on the correct value, so fix it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20240219141628.246823-4-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-5-alex.bennee@linaro.org>
Bizzarely, it is possible to set /proc/sys/vm/mmap_min_addr
to a value below the host page size. Fix that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-32-richard.henderson@linaro.org>
If set, match the host and guest page sizes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-30-richard.henderson@linaro.org>
This option controls the host page size. From the mis-usage in
our own testsuite, this is easily confused with guest page size.
The only thing that occurs when changing the host page size is
that stuff breaks, because one cannot actually change the host
page size. Therefore reject all but the no-op setting as part
of the deprecation process.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-27-richard.henderson@linaro.org>
tcg/ should not depend on accel/tcg/, but perf and debuginfo
support provided by the latter are being used by tcg/tcg.c.
Since that's the only user, move both to tcg/.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-5-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This option has been deprecated before the 8.1 release,
in commit 12fd0f41d0 ("Document that -singlestep command
line option is deprecated"). Time to drop it.
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix:
hw/core/machine.c:1302:22: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const CPUArchId *cpus = possible_cpus->cpus;
^
hw/core/numa.c:69:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
uint16List *cpus = NULL;
^
hw/acpi/aml-build.c:2005:20: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
CPUArchIdList *cpus = ms->possible_cpus;
^
hw/core/machine-smp.c:77:14: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
unsigned cpus = config->has_cpus ? config->cpus : 0;
^
include/hw/core/cpu.h:589:17: note: previous declaration is here
extern CPUTailQ cpus;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231010115048.11856-2-philmd@linaro.org>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy each guest kernel's default value, then bound it
against reserved_va or the host address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ensure that the chosen values for mmap_next_start and
task_unmapped_base are within the guest address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The heap starts at "brk" not "start_brk". With this fixed,
image_info.start_brk is unused and may be removed.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not reverse the order of environment variables in the target environ
array relative to the incoming environ order. Some testsuites depend on a
specific order, even though it is not defined by any standard.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <mvmlejfsivd.fsf@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This way we can get rid of the if'deffery and the XXX comment
here (it's repeated in the list_cpus() function anyway).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230424122126.236586-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The '-singlestep' option is confusing, because it doesn't actually
have anything to do with single-stepping the CPU. What it does do
is force TCG emulation to put one guest instruction in each TB,
which can be useful in some situations.
Create a new command line argument -one-insn-per-tb, so we can
document that -singlestep is just a deprecated synonym for it,
and eventually perhaps drop it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-5-peter.maydell@linaro.org
The only place left that looks at the old 'singlestep' global
variable is the TCG curr_cflags() function. Replace the old global
with a new 'one_insn_per_tb' which is defined in tcg-all.c and
declared in accel/tcg/internal.h. This keeps it restricted to the
TCG code, unlike 'singlestep' which was available to every file in
the system and defined in multiple different places for softmmu vs
linux-user vs bsd-user.
While we're making this change, use qatomic_read() and qatomic_set()
on the accesses to the new global, because TCG will read it without
holding a lock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-4-peter.maydell@linaro.org
This commit adds 'one-insn-per-tb' as a property on the TCG
accelerator object, so you can enable it with
-accel tcg,one-insn-per-tb=on
It has the same behaviour as the existing '-singlestep' command line
option. We use a different name because 'singlestep' has always been
a confusing choice, because it doesn't have anything to do with
single-stepping the CPU. What it does do is force TCG emulation to
put one guest instruction in each TB, which can be useful in some
situations (such as analysing debug logs).
The existing '-singlestep' commandline options are decoupled from the
global 'singlestep' variable and instead now are syntactic sugar for
setting the accel property. (These can then go away after a
deprecation period.)
The global variable remains for the moment as:
* what the TCG code looks at to change its behaviour
* what HMP and QMP use to query and set the behaviour
In the following commits we'll clean those up to not directly
look at the global variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230417164041.684562-2-peter.maydell@linaro.org
Change the semantics to be the last byte of the guest va, rather
than the following byte. This avoids some overflow conditions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been enforcing host page alignment for the non-R
fallback of MAX_RESERVED_VA, but failing to enforce for -R.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On linux user mode, CPUX86State::gdt::base from Different CPUX86State
Objects have same value, It is incorrect! Every CPUX86State::gdt::base
Must points to independent memory space.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1405
Signed-off-by: fanwenjie <fanwj@mail.ustc.edu.cn>
Message-Id: <4172b90.58b08.18631b77860.Coremail.fanwj@mail.ustc.edu.cn>
[lv: remove unnecessary casts, split overlong line]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When accsssing /proc/self/exe from a userspace program, linux-user tries
to resolve the name via realpath(), which may fail if the process
changed the working directory in the meantime.
An example:
- a userspace program ist started with ./testprogram
- the program runs chdir("/tmp")
- then the program calls readlink("/proc/self/exe")
- linux-user tries to run realpath("./testprogram") which fails
because ./testprogram isn't in /tmp
- readlink() will return -ENOENT back to the program
Avoid this issue by resolving the full path name of the started process
at startup of linux-user and store it in real_exec_path[]. This then
simplifies the emulation of readlink() and readlinkat() as well, because
they can simply copy the path string to userspace.
I noticed this bug because the testsuite of the debian package "pandoc"
failed on linux-user while it succeeded on real hardware. The full log
is here:
https://buildd.debian.org/status/fetch.php?pkg=pandoc&arch=hppa&ver=2.17.1.1-1.1%2Bb1&stamp=1670153210&raw=0
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221205113825.20615-1-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The process was pretty similar to the softmmu move except we take the
time to split stuff between user.c and user-target.c to avoid as much
target specific compilation as possible. We also start to make use of
our shiny new header scheme so the user-only helpers can be included
without the rest of the exec/gsbstub.h cruft.
As before we split some functions into user and softmmu versions
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-12-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-12-richard.henderson@linaro.org>
fork()ed processes currently start with
current_cpu->in_exclusive_context set, which is, strictly speaking, not
correct, but does not cause problems (even assertion failures).
With one of the next patches, the code begins to rely on this value, so
fix it by always calling end_exclusive() in fork_end().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230214140829.45392-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
The hppa target requires a much bigger stack than many other targets,
and the Linux kernel allocates 80 MB by default for it.
This patch increases the guest stack for hppa to 80MB, and prevents
that this default stack size gets reduced by a lower stack limit on the
host.
Since the stack grows upwards on hppa, the stack_limit value marks the
upper boundary of the stack. Fix the output of /proc/self/maps (in the
guest) to show the [stack] marker on the correct memory area.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-6-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For arm-compat, initialize console_{in,out}_gf;
otherwise, initialize stdio file descriptors.
This will go some way to cleaning up arm-compat, and
will allow other semihosting to use normal stdio.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had two sets of variables: arg_start/arg_end, and
arg_strings/env_strings. In linuxload.c, we set the
first pair to the bounds of the argv strings, but in
elfload.c, we set the first pair to the bounds of the
argv pointers and the second pair to the bounds of
the argv strings.
Remove arg_start/arg_end, replacing them with the standard
argc/argv/envc/envp values. Retain arg_strings/env_strings
with the meaning we were using in elfload.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/714
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220427025129.160184-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform all logfile setup in one step.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-30-richard.henderson@linaro.org>
We have extra stuff to log at the same time.
Hoist the qemu_log_lock/unlock to the caller and use fprintf.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-23-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
This buffering was introduced during the Paleozoic: 9fa3e85353.
There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself. We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>
