As it is today it's not possible to use '-cpu host' if the RISC-V host
has RVH enabled. This is the resulting error:
$ ./qemu/build/qemu-system-riscv64 \
-machine virt,accel=kvm -m 2G -smp 1 \
-nographic -snapshot -kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
qemu-system-riscv64: H extension requires priv spec 1.12.0
This happens because we're checking for priv spec for all CPUs, and
since we're not setting env->priv_ver for the 'host' CPU, it's being
default to zero (i.e. PRIV_SPEC_1_10_0).
In reality env->priv_ver does not make sense when running with the KVM
'host' CPU. It's used to gate certain CSRs/extensions during translation
to make them unavailable if the hart declares an older spec version. It
doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec
checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs
are available [1].
'priv_ver' is just one example. We're doing a lot of feature validation
and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs.
Validating the feature set for those CPUs is a KVM problem that should
be handled in KVM specific code.
The new riscv_cpu_realize_tcg() helper contains all validation logic that
are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're
running TCG and, if it's the case, proceed with the usual TCG realize()
logic.
[1] lib/sbi/sbi_hart.c, hart_detect_features()
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Should set/get riscv all reg timer,i.e, time/compare/frequency/state.
Signed-off-by: Yang Zhang <yang.zhang@hexintek.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1688
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230707032306.4606-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The privileged spec states:
For a memory access made to support VS-stage address translation (such as
to read/write a VS-level page table), permissions are checked as though
for a load or store, not for the original access type. However, any
exception is always reported for the original access type (instruction,
load, or store/AMO).
The current implementation converts the access type to LOAD if implicit
G-stage translation fails which results in only reporting "Load guest-page
fault". This commit removes the convertion of access type, so the reported
exception conforms to the spec.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627074915.7686-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfwma instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zvfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add trans_* and helper function for Zfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Print RvV extension register to log if VPU option is enabled.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629083730.386604-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Pointer mask is also affected by MPRV which means cur_pmbase/pmmask
should also take MPRV into consideration. As pointer mask for instruction
is not supported currently, so we can directly update cur_pmbase/pmmask
based on address related mode and xlen affected by MPRV now.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As specified in privilege spec:"When MPRV=1, load and store memory
addresses are treated as though the current XLEN were set to MPP’s
XLEN". So the xlen for address may be different from current xlen.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230614032547.35895-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") removed code that was enabling mmu, pmp, ext_ifencei
and ext_icsr from riscv_cpu_init(), the init() function of
TYPE_RISCV_CPU, parent type of all RISC-V CPUss. This was done to force
CPUs to explictly enable all extensions and features it requires,
without any 'magic values' that were inherited by the parent type.
This commit failed to make appropriate changes in the 'veyron-v1' CPU,
added earlier by commit e1d084a852. The result is that the veyron-v1
CPU has ext_ifencei, ext_icsr and pmp set to 'false', which is not the
case.
The reason why it took this long to notice (thanks LIU Zhiwei for
reporting it) is because Linux doesn't mind 'ifencei' and 'icsr' being
absent in the 'riscv,isa' DT, implying that they're both present if the
'i' extension is enabled. OpenSBI also doesn't error out or warns about
the lack of 'pmp', it'll just not protect memory pages.
Fix it by setting them to 'true' in rv64_veyron_v1_cpu_init() like
7f0bdfb5bf already did with other CPUs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Fixes: 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230620152443.137079-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SXL is initialized as env->misa_mxl which is also the mxl value.
So we can just remain it unchanged to keep it read-only.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MPV and GVA bits are added by hypervisor extension to mstatus
and mstatush (if MXLEN=32).
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upon MRET or explicit memory access with MPRV=1, MPV should be ignored
when MPP=PRV_M.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230603134236.15719-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Support for emulating XThead* instruction has been added recently.
This patch adds support for these instructions to the RISC-V disassembler.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch moves the extension test functions that are used
to gate vendor extension decoders, into cpu_cfg.h.
This allows to reuse them in the disassembler.
This patch does not introduce new functionality.
However, the patch includes a small change:
The parameter for the extension test functions has been changed
from 'DisasContext*' to 'const RISCVCPUConfig*' to keep
the code in cpu_cfg.h self-contained.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-Id: <20230612111034.3955227-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Disassemble function(plugin_disas, target_disas, monitor_disas) will
always call set_disas_info before disassembling instructions.
plugin_disas and target_disas will always be called under a TB, which
has the same XLEN.
We can't ensure that monitor_disas will always be called under a TB,
but current XLEN will still be a better choice, thus we can ensure at
least the disassemble of the nearest one TB is right.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230612111034.3955227-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This implements the AES64DSM instruction. This was the last use
of aes64_operation and its support macros, so remove them all.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ESM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64IM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DS instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ES instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction. We have converted everything
to crypto/aes-round.h; crypto/aes.h is no longer needed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESD instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESE instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split these helpers so that we are not passing 'decrypt'
within the simd descriptor.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDEC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDECLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENCLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not currently have a table in crypto/ for just MixColumns.
Move both tables for consistency.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit addresses a bug in the AVR interrupt handling code.
The modification involves replacing the usage of the ctz32 function
with ctz64 to ensure proper handling of interrupts above 33 in the AVR
target.
Previously, timers 3, 4, and 5 interrupts were not functioning correctly
because most of their interrupt vectors are numbered above 33.
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: updated subject line to have subsytem prefix)
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
=8lDs
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-07-07:
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
# ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
# =8lDs
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 03:34:44 PM BST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu: (59 commits)
ppc/pnv: Add QME region for P10
target/ppc: Remove pointless checks of CONFIG_USER_ONLY in 'kvm_ppc.h'
target/ppc: Restrict 'kvm_ppc.h' to sysemu in cpu_init.c
target/ppc: Define TYPE_HOST_POWERPC_CPU in cpu-qom.h
target/ppc: Move CPU QOM definitions to cpu-qom.h
target/ppc: Reorder #ifdef'ry in kvm_ppc.h
target/ppc: Have 'kvm_ppc.h' include 'sysemu/kvm.h'
target/ppc: Machine check on invalid real address access on POWER9/10
tests/qtest: Add xscom tests for powernv10 machine
ppc/pnv: Set P10 core xscom region size to match hardware
ppc/pnv: Log all unimp warnings with similar message
ppc440_pcix: Rename QOM type define abd move it to common header
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc4xx_pci: Rename QOM type name define
ppc440_pcix: Stop using system io region for PCI bus
ppc440_pcix: Don't use iomem for regs
ppc/sam460ex: Remove address_space_mem local variable
ppc440: Remove ppc460ex_pcie_init legacy init function
ppc440: Add busnum property to PCIe controller model
ppc440: Stop using system io region for PCIe buses
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GraniteRapids CPU model mainly adds the following new features
based on SapphireRapids:
- PREFETCHITI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- AMX-FP16 CPUID.(EAX=7,ECX=1):EAX[bit 21]
And adds the following security fix for corresponding vulnerabilities:
- MCDT_NO CPUID.(EAX=7,ECX=2):EDX[bit 5]
- SBDR_SSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 13]
- FBSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 14]
- PSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 15]
- PBRSB_NO MSR_IA32_ARCH_CAPABILITIES[bit 24]
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-7-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SapphireRapids has bit 13, 14 and 15 of MSR_IA32_ARCH_CAPABILITIES
enabled, which are related to some security fixes.
Add version 2 of SapphireRapids CPU model with those bits enabled also.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20230706054949.66556-6-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, bit 13, 14, 15 and 24 of MSR_IA32_ARCH_CAPABILITIES are
disclosed for fixing security issues, so add those bit definitions.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20230706054949.66556-5-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MCDT_NO bit indicates HW contains the security fix and doesn't need to
be mitigated to avoid data-dependent behaviour for certain instructions.
It needs no hypervisor support. Treat it as supported regardless of what
KVM reports.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-4-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.(EAX=7,ECX=2):EDX[bit 5] enumerates MCDT_NO. Processors enumerate
this bit as 1 do not exhibit MXCSR Configuration Dependent Timing (MCDT)
behavior and do not need to be mitigated to avoid data-dependent behavior
for certain instructions.
Since MCDT_NO is in a new sub-leaf, add a new CPUID feature word
FEAT_7_2_EDX. Also update cpuid_level_func7 by FEAT_7_2_EDX.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-3-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If FEAT_7_1_EAX is 0 and FEAT_7_1_EDX is non-zero, as is the case
with a Granite Rapids host and
'-cpu host,-avx-vnni,-avx512-bf16,-fzrm,-fsrs,-fsrc,-amx-fp16', we can't
get CPUID_7_1 leaf even though CPUID_7_1_EDX has non-zero value.
Update cpuid_level_func7 according to CPUID_7_1_EDX, otherwise
guest may report wrong maximum number sub-leaves in leaf 07H.
Fixes: eaaa197d5b ("target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration")
Cc: qemu-stable@nongnu.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-2-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-7-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
User emulation shouldn't need any of the KVM prototypes
declared in "kvm_ppc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-6-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TYPE_HOST_POWERPC_CPU is used in various places of cpu_init.c,
in order to restrict "kvm_ppc.h" to sysemu, move this QOM-related
definition to cpu-qom.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-ID: <20230627115124.19632-5-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Keep a single if/else/endif block checking CONFIG_KVM.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230627115124.19632-3-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
"kvm_ppc.h" declares:
int kvm_handle_nmi(PowerPCCPU *cpu, struct kvm_run *run);
'struct kvm_run' is declared in "sysemu/kvm.h", include it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230627115124.19632-2-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc currently silently accepts invalid real address access. Catch
these and turn them into machine checks on POWER9/10 machines.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230703120301.45313-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
HID is a per-core shared register, skiboot sets this (e.g., setting
HILE) on one thread and that must affect all threads of the core.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Power ISA has the concept of sub-processors:
Hardware is allowed to sub-divide a multi-threaded processor into
"sub-processors" that appear to privileged programs as multi-threaded
processors with fewer threads.
POWER9 and POWER10 have two modes, either every thread is a
sub-processor or all threads appear as one multi-threaded processor. In
the user manuals these are known as "LPAR per thread" / "Thread LPAR",
and "LPAR per core" / "1 LPAR", respectively.
The practical difference is: in thread LPAR mode, non-hypervisor SPRs
are not shared between threads and msgsndp can not be used to message
siblings. In 1 LPAR mode, some SPRs are shared and msgsndp is usable.
Thrad LPAR allows multiple partitions to run concurrently on the same
core, and is a requirement for KVM to run on POWER9/10 (which does not
gang-schedule an LPAR on all threads of a core like POWER8 KVM).
Traditionally, SMT in PAPR environments including PowerVM and the
pseries QEMU machine with KVM acceleration behaves as in 1 LPAR mode.
In OPAL systems, Thread LPAR is used. When adding SMT to the powernv
machine, it is therefore preferable to emulate Thread LPAR.
To account for this difference between pseries and powernv, an LPAR mode
flag is added such that SPRs can be implemented as per-LPAR shared, and
that becomes either per-thread or per-core depending on the flag.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently on PPC64 qemu always dumps the guest memory in
Big Endian (BE) format even though the guest running in Little Endian
(LE) mode. So crash tool fails to load the dump as illustrated below:
Log :
$ virsh dump DOMAIN --memory-only dump.file
Domain 'DOMAIN' dumped to dump.file
$ crash vmlinux dump.file
<snip>
crash 8.0.2-1.el9
WARNING: endian mismatch:
crash utility: little-endian
dump.file: big-endian
WARNING: machine type mismatch:
crash utility: PPC64
dump.file: (unknown)
crash: dump.file: not a supported file format
<snip>
This happens because cpu_get_dump_info() passes cpu->env->has_hv_mode
to function ppc_interrupts_little_endian(), the cpu->env->has_hv_mode
always set for powerNV even though the guest is not running in hv mode.
The hv mode should be taken from msr_mask MSR_HVB bit
(cpu->env.msr_mask & MSR_HVB). This patch fixes the issue by passing
MSR_HVB value to ppc_interrupts_little_endian() in order to determine
the guest endianness.
The crash tool also expects guest kernel endianness should match the
endianness of the dump.
The patch was tested on POWER9 box booted with Linux as host in
following cases:
Host-Endianess Qemu-Target-Machine Qemu-Generated-Guest
Memory-Dump-Format
BE powernv(OPAL/PowerNV) LE
BE powernv(OPAL/PowerNV) BE
LE powernv(OPAL/PowerNV) LE
LE powernv(OPAL/PowerNV) BE
LE pseries(OPAL/PowerNV/pSeries) KVMHV LE
LE pseries TCG LE
Fixes: 5609400a42 ("target/ppc: Set the correct endianness for powernv memory
dumps")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-ID: <20230623072506.34713-1-nnmlinux@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can get CPUState from env with env_cpu without going through
PowerPCCPU and casting that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <28424220f37f51ce97f24cadc7538a9c0d16cb45.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 7a3fe174b1 removed usage of POWERPC_SYSCALL_VECTORED, drop
the unused define as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <50adc24f9d408882128e896d8a81a1a059c41836.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some helpers only have a CPUState local to call cpu_interrupt_exittb()
but we can use env_cpu for that and remove the local.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <aa34e449552c6ab52d48938ccbe762fc06adac01.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All powerpc exception handlers share some code when handling machine
check exceptions. Move this to a common function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <9cfffaa35aa894086dd092af6b0b26f2d62ff3de.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
CPUState is rarely needed by this function (only for logging a fatal
error) and it's easy to get from the env parameter so passing it
separately is not necessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <f42761401c708fd6e02f7523d9f709b1972e5863.1686868895.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Several instructions and register access require icount reads and are
missing translator_io_start().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230625103700.8992-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TFMR is the Time Facility Management Register which is specific to
POWER CPUs, and used for the purpose of timebase management (generally
by firmware, not the OS).
Add helpers for the TFMR register, which will form part of the core
timebase facility model in future but for now behaviour is unchanged.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWER book4 (implementation-specific) SPRs are sometimes in their own
functions, but in other cases are mixed with architected SPRs. Do some
spring cleaning on these.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230625120317.13877-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
No need to generate TCG-specific decodetree files
when TCG is disabled.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230626140100.67941-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If you build QEMU with the clang sanitizer enabled, you can see it
fire when running the arm-cpu-features test:
$ QTEST_QEMU_BINARY=./build/arm-clang/qemu-system-aarch64 ./build/arm-clang/tests/qtest/arm-cpu-features
[...]
../../target/arm/cpu64.c:125:19: runtime error: shift exponent 64 is too large for 64-bit type 'unsigned long long'
[...]
This happens because the user can specify some incorrect SVE
properties that result in our calculating a max_vq of 0. We catch
this and error out, but before we do that we calculate
vq_mask = MAKE_64BIT_MASK(0, max_vq);$
and the MAKE_64BIT_MASK() call is only valid for lengths that are
greater than zero, so we hit the undefined behaviour.
Change the logic so that if max_vq is 0 we specifically set vq_mask
to 0 without going via MAKE_64BIT_MASK(). This lets us drop the
max_vq check from the error-exit logic, because if max_vq is 0 then
vq_map must now be 0.
The UB only happens in the case where the user passed us an incorrect
set of SVE properties, so it's not a big problem in practice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230704154332.3014896-1-peter.maydell@linaro.org
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We already squash the ID register field for FEAT_SPE (the Statistical
Profiling Extension) because TCG does not implement it and if we
advertise it to the guest the guest will crash trying to look at
non-existent system registers. Do the same for some other features
which a real hardware Neoverse-V1 implements but which TCG doesn't:
* FEAT_TRF (Self-hosted Trace Extension)
* Trace Macrocell system register access
* Memory mapped trace
* FEAT_AMU (Activity Monitors Extension)
* FEAT_MPAM (Memory Partitioning and Monitoring Extension)
* FEAT_NV (Nested Virtualization)
Most of these, like FEAT_SPE, are "introspection/trace" type features
which QEMU is unlikely to ever implement. The odd-one-out here is
FEAT_NV -- we could implement that and at some point we probably
will.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In handle_interrupt() we use level as an index into the interrupt_vector[]
array. This is safe because we have checked it against env->config->nlevel,
but Coverity can't see that (and it is only true because each CPU config
sets its XCHAL_NUM_INTLEVELS to something less than MAX_NLEVELS), so it
complains about a possible array overrun (CID 1507131)
Add an assert() which will make Coverity happy and catch the unlikely
case of a mis-set XCHAL_NUM_INTLEVELS in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-id: 20230623154135.1930261-1-peter.maydell@linaro.org
This code is only relevant when TCG is present in the build. Building
with --disable-tcg --enable-xen on an x86 host we get:
$ ../configure --target-list=x86_64-softmmu,aarch64-softmmu --disable-tcg --enable-xen
$ make -j$(nproc)
...
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `m_sysreg_ptr':
../target/arm/gdbstub.c:358: undefined reference to `arm_v7m_get_sp_ptr'
../target/arm/gdbstub.c:361: undefined reference to `arm_v7m_get_sp_ptr'
libqemu-aarch64-softmmu.fa.p/target_arm_gdbstub.c.o: in function `arm_gdb_get_m_systemreg':
../target/arm/gdbstub.c:405: undefined reference to `arm_v7m_mrs_control'
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230628164821.16771-1-farosas@suse.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike architectures with precise self-modifying code semantics
(e.g. x86) ARM processors do not maintain coherency for instruction
execution and memory, requiring an instruction synchronization
barrier on every core that will execute the new code, and on many
models also the explicit use of cache management instructions.
While this is required to make JITs work on actual hardware, QEMU
has gotten away with not handling this since it does not emulate
caches, and unconditionally invalidates code whenever the softmmu
or the user-mode page protection logic detects that code has been
modified.
Unfortunately the latter does not work in the face of dual-mapped
code (a common W^X workaround), where one page is executable and
the other is writable: user-mode has no way to connect one with the
other as that is only known to the kernel and the emulated
application.
This commit works around the issue by telling software that
instruction cache invalidation is required by clearing the
CPR_EL0.DIC flag (regardless of whether the emulated processor
needs it), and then invalidating code in IC IVAU instructions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1034
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Högberg <john.hogberg@ericsson.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 168778890374.24232.3402138851538068785-1@git.sr.ht
[PMM: removed unnecessary AArch64 feature check; moved
"clear CTR_EL1.DIC" code up a bit so it's not in the middle
of the vfp/neon related tests]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.
The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always print each matrix row whole, one per line, so that we
get the entire matrix in the proper shape.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the line length to extend to 548 columns. While annoyingly wide,
it's still less confusing than the continuations we print. Also, the
default VL used by Linux (and max for A64FX) uses only 140 columns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some registers whose 'cooked' writefns induce TLB maintenance do
not have raw_writefn ops defined. If only the writefn ops is set
(ie. no raw_writefn is provided), it is assumed the cooked also
work as the raw one. For those registers it is not obvious the
tlb_flush works on KVM mode so better/safer setting the raw write.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
The ptw code is accessed by non-TCG code (specifically arm_pamax and
arm_cpu_get_phys_page_attrs_debug) but most of it is really only for
TCG emulation. Seeing as we already assert for a non TARGET_AARCH64
build lets extend the test rather than further messing with the ifdef
ladder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-19-alex.bennee@linaro.org>
When we generate code for guest loads and stores, at the moment they
end up being requests for a host-endian access. So for target-system-nios2
(little endian) a load like
ldw r3,0(r4)
results on an x86 host in the TCG IR
qemu_ld_a32_i32 r3,loc2,al+leul,0
but on s390 it is
qemu_ld_a32_i32 r3,loc2,al+beul,0
The result is that guests don't work on big-endian hosts.
Use the MO_TE* memops rather than the plain ones.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1693
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230623172556.1951974-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The standard floating point results are provided by the generic routine.
We only need handle the extra Z flag result afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230527141910.1885950-5-richard.henderson@linaro.org>
For the most part we can use the new generic routine,
though exceptions need some post-processing to sort
invalid from integer overflow.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230527141910.1885950-4-richard.henderson@linaro.org>
* Fix backwards time with -icount auto
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSdRiQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqcwf9FGAqZ+0V34Y8XeXMu8Es3bFjEKG8
t3BpVNhTBOYDPvpshnPVx2I29nRT2opc1C4YkjMAv5/1nivj1kDM7hDObOSJQvqy
5FgTsJYqRtGj+J7uVBrspWZsP8BYeykKmXR6deBOPvCuw5nnLdDQ3dLV2F26lKUu
lsFyEVbi4dzf8+TVuNIXEg7mVBYytjBQwBmmHgeOofeikjq9WEudr49mwJMCHyzl
iXCatnctXGKZYSnp+eHIBiFRdSzjqdgrDRa0ysSqABoBI1pmkhyQKSay6cSjfG4n
gFlqPF/i9RqAWpsQrM1IMGgPK39SrT2dYlHDJV2P/NEQrS6kLh2HoW/ArQ==
=oj3B
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Make named CPU models usable for qemu-{i386,x86_64}
* Fix backwards time with -icount auto
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSdRiQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqcwf9FGAqZ+0V34Y8XeXMu8Es3bFjEKG8
# t3BpVNhTBOYDPvpshnPVx2I29nRT2opc1C4YkjMAv5/1nivj1kDM7hDObOSJQvqy
# 5FgTsJYqRtGj+J7uVBrspWZsP8BYeykKmXR6deBOPvCuw5nnLdDQ3dLV2F26lKUu
# lsFyEVbi4dzf8+TVuNIXEg7mVBYytjBQwBmmHgeOofeikjq9WEudr49mwJMCHyzl
# iXCatnctXGKZYSnp+eHIBiFRdSzjqdgrDRa0ysSqABoBI1pmkhyQKSay6cSjfG4n
# gFlqPF/i9RqAWpsQrM1IMGgPK39SrT2dYlHDJV2P/NEQrS6kLh2HoW/ArQ==
# =oj3B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 Jun 2023 10:51:48 AM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386: emulate 64-bit ring 0 for linux-user if LM feature is set
target/i386: ignore CPL0-specific features in user mode emulation
target/i386: ignore ARCH_CAPABILITIES features in user mode emulation
target/i386: Export MSR_ARCH_CAPABILITIES bits to guests
icount: don't adjust virtual time backwards after warp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
32-bit binaries can run on a long mode processor even if the kernel
is 64-bit, of course, and this can have slightly different behavior;
for example, SYSCALL is allowed on Intel processors.
Allow reporting LM to programs running under user mode emulation,
so that "-cpu" can be used with named CPU models even for qemu-i386
and even without disabling LM by hand.
Fortunately, most of the runtime code in QEMU has to depend on HF_LMA_MASK
or on HF_CS64_MASK (which is anyway false for qemu-i386's 32-bit code
segment) rather than TARGET_X86_64, therefore all that is needed is an
update of linux-user's ring 0 setup.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Features such as PCID are only accessible through privileged operations,
and therefore have no impact on any user-mode operation. Allow reporting
them to programs running under user mode emulation, so that "-cpu" can be
used with more named CPU models.
XSAVES would be similar, but it doesn't make sense to provide it until
XSAVEC is implemented.
With this change, all CPUs up to Broadwell-v4 can be emulate. Skylake-Client
requires XSAVEC, while EPYC also requires SHA-NI, MISALIGNSSE and TOPOEXT.
MISALIGNSSE is not hard to implement, but I am not sure it is worth using
a precious hflags bit for it.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1534
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARCH_CAPABILITIES is only accessible through a read-only MSR, so it has
no impact on any user-mode operation (user-mode cannot read the MSR).
So do not bother printing warnings about it in user mode emulation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Intel CPUs there are certain bits in MSR_ARCH_CAPABILITIES that
indicates if the CPU is not affected by a vulnerability. Without these
bits guests may try to deploy the mitigation even if the CPU is not
affected.
Export the bits to guests that indicate immunity to hardware
vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Message-ID: <63d85cc76d4cdc51e6c732478b81d8f13be11e5a.1687551881.git.pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add MEMORY_LISTNER_PRIORITY_MIN for the symbolic value for the min value of
the memory listener instead of the hard-coded magic value 0. Add explicit
initialization.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <29f88477fe82eb774bcfcae7f65ea21995f865f2.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory
listener to replace the hard-coded value 10 for accel.
No functional change intended.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
003f230e37 ("machine: Tweak the order of topology members in struct
CpuTopology") changes the meaning of MachineState.smp.cores from "the
number of cores in one package" to "the number of cores in one die"
and doesn't fix other uses of MachineState.smp.cores. And because of
the introduction of cluster, now smp.cores just means "the number of
cores in one cluster". This clearly does not fit the semantics here.
And before this error message, WHvSetPartitionProperty() is called to
set prop.ProcessorCount.
So the error message should show the prop.ProcessorCount other than
"cores per cluster" or "cores per package".
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230529124331.412822-1-zhao1.liu@linux.intel.com>
[PMD: Use '%u' format for ProcessorCount]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These fields shouldn't be accessed when KVM is not available.
Restrict the KVM timer migration state. Rename the KVM timer
post_load() handler accordingly, because cpu_post_load() is
too generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230626232007.8933-3-philmd@linaro.org>
The 'kvm_sw_tlb' and 'tlb_dirty' fields introduced in commit
93dd5e852c ("kvm: ppc: booke206: use MMU API") are specific
to KVM and shouldn't be accessed when it is not available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230624192645.13680-1-philmd@linaro.org>
These fields shouldn't be accessed when KVM is not available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-8-philmd@linaro.org>
"kvm_arm.h" contains external and internal prototype declarations.
Files under the hw/ directory should only access the KVM external
API.
In order to avoid machine / device models to include "kvm_arm.h"
simply to get the QOM GIC/ITS class name, un-inline each class
name getter to the proper device model file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230405160454.97436-4-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState.
Rename the 'hvf_vcpu_state' structure as 'AccelCPUState'.
Use the generic 'accel' field of CPUState instead of 'hvf'.
Replace g_malloc0() by g_new0() for readability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-17-philmd@linaro.org>
Most of the codebase uses 'CPUState *cpu' or 'CPUState *cs'.
While 'cpu_state' is kind of explicit, it makes the code
harder to review. Simply rename as 'cs'.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230624174121.11508-16-philmd@linaro.org>
No need for this helper to access the CPUState::accel field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-15-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState. Rename WHPX 'whpx_vcpu' as 'AccelCPUState'; use
the typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-14-philmd@linaro.org>
No need for this helper to access the CPUState::accel field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-12-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState. Rename NVMM 'qemu_vcpu' as 'AccelCPUState'; directly
use the typedef, remove unnecessary casts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-11-philmd@linaro.org>
hThread variable is only used by the HAX accelerator,
so move it to the accelerator specific context.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-9-philmd@linaro.org>
We want all accelerators to share the same opaque pointer in
CPUState. Start with the HAX context, renaming its forward
declarated structure 'hax_vcpu_state' as 'AccelCPUState'.
Document the CPUState field. Directly use the typedef.
Remove the amusing but now unnecessary casts in NVMM / WHPX.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-8-philmd@linaro.org>
All accelerators will share a single opaque context
in CPUState. Start by renaming 'hax_vcpu' as 'accel'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624174121.11508-7-philmd@linaro.org>
When the vCPU thread finished its processing, destroy
it and signal its destruction to generic vCPU management
layer.
Add a sanity check for the vCPU accelerator context.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-6-philmd@linaro.org>
hThread is only used on the error path in hax_kick_vcpu_thread().
Fixes: b0cb0a66d6 ("Plumb the HAXM-based hardware acceleration support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-5-philmd@linaro.org>
On Windows hosts, cpu->hThread is assigned but never accessed:
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230624174121.11508-4-philmd@linaro.org>
Since MinGW commit 395dcfdea ("rename hyper-v headers and def
files to lower case") [*], WinHvPlatform.h and WinHvEmulation.h
got respectively renamed as winhvplatform.h / winhvemulation.h.
The mingw64-headers package included in the Fedora version we
use for CI does include this commit; and meson fails to detect
these present-but-renamed headers while cross-building (on
case-sensitive filesystems).
Use the renamed header in order to detect and successfully
cross-build with the WHPX accelerator.
Note, on Windows hosts, the libraries are still named as
WinHvPlatform.dll and WinHvEmulation.dll, so we don't bother
renaming the definitions used by load_whp_dispatch_fns() in
target/i386/whpx/whpx-all.c.
[*] https://sourceforge.net/p/mingw-w64/mingw-w64/ci/395dcfdea
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230624142211.8888-3-philmd@linaro.org>
We incorporate %asi into tb->flags so that we may generate
inline code for the many ASIs for which it is easy to do so.
Setting %asi is common for e.g. memcpy and memset performing
block copy and clear, so it is worth noticing this case.
We must end the TB but do not need to return to the main loop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-9-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
After the register window unwind, this is for a plain indirect
branch with no further side effects.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-8-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is for a plain indirect branch with no other side effects.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-7-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When resolving JUMP_PC, we know this is for a plain branch
with no other side effects.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-6-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Create a new artificial "next pc" which also indicates
that nothing has changed within the cpu state which
requires returning to the main loop.
Pipe this new value though all pc/npc checks.
Do not produce this new value yet.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230628071202.230991-5-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Let the compiler decide about inlining.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-4-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
During translation, npc == address, DYNAMIC_PC, or JUMP_PC.
It is only the encoding between here and sparc_restore_state_to_opc
that considers JUMP_PC to be a bit within a larger value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-3-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230628071202.230991-2-richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The microblaze architecture does not reorder instructions.
While there is an MBAR wait-for-data-access instruction,
this concerns synchronizing with DMA.
This should have been defined when enabling MTTCG.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Fixes: d449561b13 ("configure: microblaze: Enable mttcg")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
=WHE2
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* kvm: reuse per-vcpu stats fd to avoid vcpu interruption
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
# EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
# B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
# dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
# 3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
# 5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
# =WHE2
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 10:24:34 AM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
git-submodule.sh: allow running in validate mode without previous update
target/i386: implement SYSCALL/SYSRET in 32-bit emulators
target/i386: implement RDPID in TCG
target/i386: sysret and sysexit are privileged
target/i386: AMD only supports SYSENTER/SYSEXIT in 32-bit mode
target/i386: Intel only supports SYSCALL/SYSRET in long mode
target/i386: TCG supports WBNOINVD
target/i386: TCG supports XSAVEERPTR
target/i386: do not accept RDSEED if CPUID bit absent
target/i386: TCG supports RDSEED
target/i386: TCG supports 3DNow! prefetch(w)
target/i386: fix INVD vmexit
kvm: reuse per-vcpu stats fd to avoid vcpu interruption
hw/riscv: Validate cluster and NUMA node boundary
hw/arm: Validate cluster and NUMA node boundary
numa: Validate cluster and NUMA node boundary if required
hw/remote/proxy: Remove dubious 'event_notifier-posix.c' include
build: further refine build.ninja rules
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AMD supports both 32-bit and 64-bit SYSCALL/SYSRET, but the TCG only
exposes it for 64-bit targets. For system emulation just reuse the
helper; for user-mode emulation the ABI is the same as "int $80".
The BSDs does not support any fast system call mechanism in 32-bit
mode so add to bsd-user the same stub that FreeBSD has for 64-bit
compatibility mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RDPID corresponds to a RDMSR(TSC_AUX); however, it is unprivileged
so for user-mode emulation we must provide the value that the kernel
places in the MSR. For Linux, it is a combination of the current CPU
and the current NUMA node, both of which can be retrieved with getcpu(2).
Also try sched_getcpu(), which might be there on the BSDs. If there is
no portable way to retrieve the current CPU id from userspace, return 0.
RDTSCP is reimplemented as RDTSC + RDPID ECX; the differences in terms
of serializability are not relevant to QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WBNOINVD is the same as INVD or WBINVD as far as TCG is concerned,
since there is no cache in TCG and therefore no invalidation side effect
in WBNOINVD.
With respect to SVM emulation, processors that do not support WBNOINVD
will ignore the prefix and treat it as WBINVD, while those that support
it will generate exactly the same vmexit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVEERPTR is actually a fix for an errata; TCG does not have the issue.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is
secure enough to match hardware behavior. Expose it to guests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A relatively simple case to begin with, CTRL is a SMT shared register
where reads and writes need to synchronise against state changes by
other threads in the core.
Atomic serialisation operations are used to achieve this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TGC SMT emulation needs to know whether it is running with SMT siblings,
to be able to iterate over siblings in a core, and to serialise
threads to access per-core shared SPRs. Add infrastructure to do these
things.
For now the sibling iteration and serialisation are implemented in a
simple but inefficient way. SMT shared state and sibling access is not
too common, and SMT configurations are mainly useful to test system
code, so performance is not to critical.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: fix build breakage with clang ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The top bits of the LEV field of the sc instruction are to be treated as
as a reserved field rather than a reserved value, meaning LEV is
effectively the bottom bit. LEV=0xF should be treated as LEV=1 and be
a hypercall, for example.
This changes the instruction execution to just set lev from the low bit
of the field. Processors which don't support the LEV field will continue
to ignore it.
ISA v3.1 defines LEV to be 2 bits, in order to add the 'sc 2' ultracall
instruction. TCG does not support Ultravisor, so don't worry about
that bit.
Suggested-by: "Harsh Prateek Bora" <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The CTRL register is able to write the bit in the RUN field, which gets
reflected into the TS field which is read-only and contains the state of
the RUN field for all threads in the core.
TCG does not implement SMT, so the correct implementation just requires
mirroring the RUN bit into the first bit of the TS field.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
System call interrupts in ISA v3.1 CPUs add a LEV indication in SRR1
that corresponds with the LEV field of the instruction that caused the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The hypervisor emulation assistance interrupt modifies HEIR to
contain the value of the instruction which caused the exception.
Only TCG raises HEAI interrupts so this can be made TCG-only.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v3.1 introduced prefix instructions. Among the changes, various
synchronous interrupts report whether they were caused by a prefix
instruction in (H)SRR1.
The case of instruction fetch that causes an HDSI due to access of a
process-scoped table faulting on the partition scoped translation is the
tricky one. As with ISIs and HISIs, this does not try to set the prefix
bit because there is no instruction image to be loaded. The HDSI needs
the originating access type to be passed through to the handler to
distinguish this from HDSIs that fault translating process scoped tables
originating from a load or store instruction (in that case the prefix
bit should be provided).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch issues ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rather than always performing partition scope page table translation
with access type of 0 (MMU_DATA_LOAD), pass through the processor
access type which first initiated the translation sequence. Process-
scoped page table loads are then set to MMU_DATA_LOAD access type in
the xlate function.
This will allow more information to be passed to the exception
handler in the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
powerpc ifetch endianness depends on MSR[LE] so it has to byteswap
after cpu_ldl_code(). This corrects DSISR bits in alignment
interrupts when running in little endian mode.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When the Timer Control and Timer Status registers are modified, avoid
calling the KVM backend when not available
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure each CPU gets its state set up for gdb, not just the ones
before PowerPCCPUClass has had its gdb state set up.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Brown bag time: store instead of load results in uninitialized temp.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1704
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620134659.817559-1-richard.henderson@linaro.org
Fixes: e6dd5e782b ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r")
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One cannot test for feature aa32_simd_r32 without first
testing if AArch32 mode is supported at all. This leads to
qemu-system-aarch64: ARM CPUs must have both VFP-D32 and Neon or neither
for Apple M1 cpus.
We already have a check for ARMv8-A never setting vfp-d32 true,
so restructure the code so that AArch64 avoids the test entirely.
Reported-by: Mads Ynddal <mads@ynddal.dk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mads Ynddal <m.ynddal@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Mads Ynddal <m.ynddal@samsung.com>
Message-id: 20230619140216.402530-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an x-rme cpu property to enable FEAT_RME.
Add an x-l0gptsz property to set GPCCR_EL3.L0GPTSZ,
for testing various possible configurations.
We're not currently completely sure whether FEAT_RME will
be OK to enable purely as a CPU-level property, or if it will
need board co-operation, so we're making these experimental
x- properties, so that the people developing the system
level software for RME can try to start using this and let
us know how it goes. The command line syntax for enabling
this will change in future, without backwards-compatibility.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Place the check at the end of get_phys_addr_with_struct,
so that we check all physical results.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle GPC Fault types in arm_deliver_fault, reporting as
either a GPC exception at EL3, or falling through to insn
or data aborts at various exception levels.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
