Commit Graph

39171 Commits

Author SHA1 Message Date
Aurelien Jarno
9182886d79 target-s390x: move SET DFP ROUNDING MODE to the correct facility
It belongs to the DFP rounding facility.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:59 +02:00
Aurelien Jarno
f7c2114067 target-s390x: move STORE CLOCK FAST to the correct facility
STORE CLOCK FAST should be in the SCF facility.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
74266b4a58 target-s390x: change CHRL and CGHRL format to RIL-b
Change to match the PoP. In practice both format RIL-a and RIL-b have
the same fields. They differ on the way we decode the fields, and it's
done correctly in QEMU.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
1dedb9b76f target-s390x: fix CLGIT instruction
The COMPARE LOGICAL IMMEDIATE AND TRAP instruction should compare the
numbers as unsigned, as its name implies.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
111d7f4a69 target-s390x: fix exception for invalid operation code
When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.

This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
a1c7610a68 target-s390x: implement LAY and LAEY instructions
This complete the general-instructions-extension facility, enable it.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
92892330e7 target-s390x: move a few instructions to the correct facility
LY is part of the long-displacement facility.
RISBHG and RISBLG are part of the high-word facility.
STCMH is part of the z/Architecture.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
4a33565f9f target-s390x: detect tininess before rounding for FP operations
The s390x floating point unit detects tininess before rounding, so set
the softfloat fp_status up appropriately.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
f821135cdd target-s390x: silence NaNs for LOAD LENGTHENED and LOAD ROUNDED
LOAD LENGTHENED and LOAD ROUNDED are considered as FP operations and
thus need to convert input sNaN into corresponding qNaN.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
2daea9c16f target-s390x: define default NaN values
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
1f65958d9c target-s390x: fix MMU index computation
The cpu_mmu_index function wrongly looks at PSW P bit to determine the
MMU index, while this bit actually only control the use of priviledge
instructions. The addressing mode is detected by looking at the PSW ASC
bits instead.

This used to work more or less correctly up to kernel 3.6 as the kernel
was running in primary space and userland in secondary space. Since
kernel 3.7 the default is to run the kernel in home space and userland
in primary space. While the current QEMU code seems to work it open some
security issues, like accessing the lowcore memory in R/W mode from a
userspace process once it has been accessed by the kernel (it is then
cached by the QEMU TLB).

At the same time change the MMU_USER_IDX value so that it matches the
value used in recent kernels.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
9bebf9863b target-s390x: fix PSW value on dynamical exception from helpers
runtime_exception computes the psw.addr value using the actual exception
address and the instruction length computed by calling the get_ilen
function. However as explained above the get_ilen code, it returns the
actual instruction length, and not the ILC. Therefore there is no need to
multiply the value by 2.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
aa752a4afc target-s390x: fix LOAD MULTIPLE instruction on page boundary
When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.

This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.

Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.

This fixes random segmentation faults seen in the guest.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:58 +02:00
Aurelien Jarno
b8ae94bd39 target-s390x: implement STPT helper
Save the timer target value in the SPT helper, so that the STPT helper
can compute the remaining time.

This allow the Linux kernel to correctly do time accounting.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
aa9e14e684 target-s390x: implement STCKC helper
The STCKC instruction just returns the last written clock comparator
value and KVM already provides the corresponding variable.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
d9d55f1108 target-s390x: streamline STCK helper
Now that clock_value is only used in one place, we can inline it in
the STCK helper.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
c941f07485 target-s390x: simplify SCKC helper
The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
9cb32c442e target-s390x: add a tod2time function
Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
a91a1b20a2 target-s390x: remove unused helpers
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
d30107814c target-s390x: optimize (negative-) abs computation
Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
2aaa194068 target-s390x: fix CC computation for LOAD POSITIVE instructions
LOAD POSITIVE instructions (LPR, LPGR and LPGFR) set the following
condition code:
  0: Result zero; no overflow
  1: --
  2: Result greater than zero; no overflow
  3: Overflow

The current code wrongly returns 1 instead of 2 in case of a result
greater than 0. This patches fixes that. This fixes the marshalling of
the value '0L' in Python.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Aurelien Jarno
ee0d0be168 target-s390x: fix CC computation for EX instruction
Commit 7a6c7067f optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).

This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05 01:37:57 +02:00
Peter Maydell
3b730f570c Patch queue for ppc - 2015-06-03
Highlights this time around:
 
   - sPAPR: endian fixes, speedups, bug fixes, hotplug basics
   - add default ram size capability for machines (sPAPR defaults to 512MB now)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJVb3itAAoJECszeR4D/txgGncQAIz7tPRvMlCJyaGdYIkySUh4
 vbwAf4Z2Ddjv/gA/3G3oY1lC5RnhOJucxCbobzdayKecrdkdAJa/O/6RbKij4zMD
 svXseSpk8aKr4yrfNItxrjysJsp4cMS7APim7HcF5mOBJJqp0COkr1q97VteTfY1
 AdiSfBU5IEj0RZ+J1pSnMVf837gLiKSv+L2gTyGkb66VBMqZOZzu5UuoUhIOfa+R
 /tlm2VMRKe7vrU7Q4TL8Syn9UZnB03aNrKIXYN0VJy5WTePSMWPSQ6fbImTELEQB
 En87DGYt/QVs0eB7XNwzhF0REFblHECOzFhbOovCrvGZIa4xai8HJaJHMeaxQfkx
 4Aiby7Kv8wJgjn13OuBTvG7YWtw3hJcO1i0ePs2MmGz9sJNzhz0tyRSRglc3xN1Q
 RBrqyl3lOsnvNRzj/py7kYxCKtG8xlkaTSkO6FfXmt9UMW91pqWo4/2LCTON0zkx
 +gd2UW7JPw2u6ttzCu+b8BZv1ATovHoj2wXPP4iEYpe1sGT6qp4moZZ6CtWex/O3
 4Lhd9jJVJurMZl6e1pn/4bkcEhNvT2B484GmmerrZXrtlKm9wcepqMJC2bVCtzjT
 JBLNGTk6z8QKN5WRD+LWD3LgEjAEqV6nvqrmiwovMUtC0lJSHJTTAoeurM3h6jJn
 eaR4tzdEqHgDhzkOCHux
 =zWZp
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging

Patch queue for ppc - 2015-06-03

Highlights this time around:

  - sPAPR: endian fixes, speedups, bug fixes, hotplug basics
  - add default ram size capability for machines (sPAPR defaults to 512MB now)

# gpg: Signature made Wed Jun  3 22:59:09 2015 BST using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"

* remotes/agraf/tags/signed-ppc-for-upstream: (40 commits)
  softmmu: support up to 12 MMU modes
  tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS
  tci: do not use CPUArchState in tcg-target.h
  Add David Gibson for sPAPR in MAINTAINERS file
  pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations
  spapr: override default ram size to 512MB
  machine: add default_ram_size to machine class
  spapr_pci: emit hotplug add/remove events during hotplug
  spapr_pci: enable basic hotplug operations
  pci: make pci_bar useable outside pci.c
  spapr_pci: create DRConnectors for each PCI slot during PHB realize
  spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge
  spapr_drc: add spapr_drc_populate_dt()
  spapr_events: event-scan RTAS interface
  spapr_events: re-use EPOW event infrastructure for hotplug events
  spapr_rtas: add ibm, configure-connector RTAS interface
  spapr: add rtas_st_buffer_direct() helper
  spapr_rtas: add get-sensor-state RTAS interface
  spapr_rtas: add set-indicator RTAS interface
  spapr_rtas: add get/set-power-level RTAS interfaces
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 14:04:14 +01:00
Peter Maydell
2700a976db trivial patches for 2015-06-03
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVbvwjAAoJEL7lnXSkw9fbaFwIAIh6PN5v6fvuEjnPX5ijHZC2
 7iJoFd0I2cYrxgLe4xONFX9qzV5vgdEAJfXCljVCKAmzu5RK7G0ZSW81sJ3t6Mp8
 kA8buJeyTp2UcTlDrC3qji8ScEIj+g8I9tKGflNVI2uDAVumMBPqnJNSFhbaqYlu
 SEq+4y/D3J6xPzr7NhyHliG0NmxJrIn6QCtux5djj3xO4KXfp1j2YQCPKhYjkRlW
 wHfqeD7x9LX6875FX3csgfPsYIycW0WYtba2adTe0vbTsclOY0CU3ho8HPeXgHE6
 WQj6KYGT8Fo0zmK8UV0Jmok7+hZoxXXInf6vY+sSY58oe71FgdxNwLvIC6N0eQc=
 =AALk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-06-03' into staging

trivial patches for 2015-06-03

# gpg: Signature made Wed Jun  3 14:07:47 2015 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-06-03: (30 commits)
  configure: postfix --extra-cflags to QEMU_CFLAGS
  cadence_gem: Fix Rx buffer size field mask
  slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
  translate-all: delete prototype for non-existent function
  Add -incoming help text
  hw/display/tc6393xb.c: Fix misusing qemu_allocate_irqs for single irq
  hw/arm/nseries.c: Fix misusing qemu_allocate_irqs for single irq
  hw/alpha/typhoon.c: Fix misusing qemu_allocate_irqs for single irq
  hw/unicore32/puv3.c: Fix misusing qemu_allocate_irqs for single irq
  hw/lm32/milkymist.c: Fix misusing qemu_allocate_irqs for single irq
  hw/lm32/lm32_boards.c: Fix misusing qemu_allocate_irqs for single irq
  hw/ppc/prep.c: Fix misusing qemu_allocate_irqs for single irq
  hw/sparc/sun4m.c: Fix misusing qemu_allocate_irqs for single irq
  hw/timer/arm_timer.c: Fix misusing qemu_allocate_irqs for single irq
  hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irq
  hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irq
  hw/i386/pc: Fix misusing qemu_allocate_irqs for single irq
  hw/intc/exynos4210_gic.c: Fix memory leak by adjusting order
  hw/arm/omap_sx1.c: Fix memory leak spotted by valgrind
  hw/ppc/e500.c: Fix memory leak
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 12:49:15 +01:00
Peter Maydell
6fa6b31276 X86 queue 2015-06-02
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJVbgItAAoJECgHk2+YTcWmGhYP/RMNvcoOQzfRZ1xqztQlm2cp
 WRSnsQm2+16omGypuEGTgjr/pojlD/xRllhFMJqYPGt0ZSmwsd6AgZtU5hLnHGRb
 HJdq1js7GPsduR8/DPoBCAD6nA8wsrdjBt5WZkCf35WU4CaPFDTx1w35KdekdzVS
 0guhSypAQdrxIULvPteJw/S6u6OA42nads2xClfvmzE3kKnedeBcLLE/GzrrkIc3
 5aFjS1ndVK9rtOBldnIqq10q89c7ug60wuZi0SFqf1r4Do9cZqQgmXU7c0OiJu1G
 05F0racvGaCMNp1JyH6z5pvPVjImZfu06Wz0+433hKSHvNqh25mJ4lZVGcqfHFoB
 Ek2+iam6xej1+I2Wbt3NOBR8K0ldDMtnVpUiXMUvT2j4AUQBc2Cs79rXBgY8Qz3P
 48fI2xMlOY0TFIQTra38ZomX4Jkukhu38BRixed2/CGi1mo6N9GT5OCYBBsy2MgW
 o4yFmnzJD8eCopWXFXc93Pvdvrpn5/NJsmiNDFO66lxfQr+VfqzlG6eWpxQ7wXpR
 /JY8k21R0gHB02v7B2Kyqdj9UXmunYWS28P6LJ/z5UtCCivr/+szUTdKDOvKXt42
 HrVGgpEscs0huvsUPzJRtCYYsgKIEZB7UTxOxHiAPmBOBBnB/pLiOrkoZuQIiQee
 KxjJWNd9wMOyx90t54AI
 =VKFL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging

X86 queue 2015-06-02

# gpg: Signature made Tue Jun  2 20:21:17 2015 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-pull-request:
  arch_init: Drop target-x86_64.conf
  target-i386: Register QOM properties for feature flags
  apic: convert ->busdev.qdev casts to C casts
  target-i386: Fix signedness of MSR_IA32_APICBASE_BASE
  pc: Ensure non-zero CPU ref count after attaching to ICC bus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 11:44:32 +01:00
Peter Maydell
d2ceeb1d68 target-arm queue:
* more EL2 preparation patches
  * revert a no-longer-necessary workaround for old glib versions
  * add GICv2m support to virt board (MSI support)
  * pl061: fix wrong calculation of GPIOMIS register
  * support MSI via irqfd
  * remove a confusing v8_ prefix from some variable names
  * add dynamic sysbus device support to the virt board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJVbdouAAoJEDwlJe0UNgzeQSYP/iXkogCzrNAqkcAGNzzVox5o
 54HFUMBFC05hnOBQxxUcGwXDetidYIEFuSt2uUooZapWYzL6ProIDXcgYMoVJTzL
 XaYUzuV3M3pxl8A7DtKRv39e9HTDL4EmT+dd8mNuRHfbhmvlFlWw3TzO/DHxl29e
 iOIrNDaLAPjI4QyFR0k5kHTmijTm13Sd5/Un/8m6bjKtrKst8k2HmqemtsjcrVUK
 +/9k+60+uTYJb4xKKcCY7w0zbbJGvlW9216bf3ccfAvGAbaGDxH+hRn0E1xd2BoR
 JmXofWYL55tT8cQxO7ZjCDMzhiJsQ/hFlo1ds5DkdcYuaYXUHiRB62mleSb2zc+T
 kcLFWCBQp/YWULpngZrnu5bzKUN0BwFtTOoMMv5WGR/N4hAcj6rgIIEaGeRsGrhV
 XrGeLmk25IwrIvn4Nwr0Ve70g6rdL5NauVYq21Bx2GLK18NEXXsUR1Z0X38WSVrN
 HXBNFHFECf0S1CNp8KVcyyfE+XZx2Cb5jFpS2jiy648KoXHgHYZUjCqJd4JzRAQB
 dEjoNKA6yod72UkgpoeaOTHsF9razOpqG+ymJzsVTiDBpg/eE6ZT/0jCBZ+92NqN
 qf2IUwubQH9jAFcxDuzoHDx+XCycdkYVEnoBGtBcS2QfaJd4dwfJkFAOOHR70XkH
 Kvj419eJjO0uhItsEODA
 =s7uF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150602' into staging

target-arm queue:
 * more EL2 preparation patches
 * revert a no-longer-necessary workaround for old glib versions
 * add GICv2m support to virt board (MSI support)
 * pl061: fix wrong calculation of GPIOMIS register
 * support MSI via irqfd
 * remove a confusing v8_ prefix from some variable names
 * add dynamic sysbus device support to the virt board

# gpg: Signature made Tue Jun  2 17:30:38 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20150602: (22 commits)
  hw/arm/virt: change indentation in a15memmap
  hw/arm/virt: add dynamic sysbus device support
  hw/arm/boot: arm_load_kernel implemented as a machine init done notifier
  hw/arm/sysbus-fdt: helpers for platform bus nodes addition
  target-arm: Remove v8_ prefix from names of non-v8-specific cpreg arrays
  arm_gicv2m: set kvm_gsi_direct_mapping and kvm_msi_via_irqfd_allowed
  kvm: introduce kvm_arch_msi_data_to_gsi
  pl061: fix wrong calculation of GPIOMIS register
  target-arm: Add the GICv2m to the virt board
  target-arm: Extend the gic node properties
  arm_gicv2m: Add GICv2m widget to support MSIs
  target-arm: Add GIC phandle to VirtBoardInfo
  Revert "target-arm: Avoid g_hash_table_get_keys()"
  target-arm: Add TLBI_VAE2{IS}
  target-arm: Add TLBI_ALLE2
  target-arm: Add TLBI_ALLE1{IS}
  target-arm: Add TTBR0_EL2
  target-arm: Add TPIDR_EL2
  target-arm: Add SCTLR_EL2
  target-arm: Add TCR_EL2
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 10:21:52 +01:00
Paolo Bonzini
1de29aef17 softmmu: support up to 12 MMU modes
At 8k per TLB (for 64-bit host or target), 8 or more modes
make the TLBs bigger than 64k, and some RISC TCG backends do
not like that.  On the affected hosts, cut the TLB size in
half---there is still a measurable speedup on PPC with the
next patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:56 +02:00
Paolo Bonzini
006f8638c6 tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS
This will be used to size the TLB when more than 8 MMU modes are
used by the target.  Limitations come from the limited size of
the immediate fields (which sometimes, as in the case of Aarch64,
extend to instructions that shift the immediate).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:56 +02:00
Paolo Bonzini
5a58e884d1 tci: do not use CPUArchState in tcg-target.h
tcg-target.h does not use any QEMU-specific symbols, save for tci's usage
of CPUArchState.  Pull that up to tcg/tcg.h.

This will make it possible to include tcg-target.h in cpu-defs.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:55 +02:00
David Gibson
085eb217df Add David Gibson for sPAPR in MAINTAINERS file
At Alex Graf's request I'm now acting as sub-maintainer for the sPAPR
(-machine pseries) code.  This updates MAINTAINERS accordingly.

While we're at it, change the label to mention pseries since that's the
actual name of the machine type, even if most of the C files use the sPAPR
name.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:55 +02:00
David Gibson
026bfd89cb pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations
qemu currently implements the hypercalls H_LOGICAL_CI_LOAD and
H_LOGICAL_CI_STORE as PAPR extensions.  These are used by the SLOF firmware
for IO, because performing cache inhibited MMIO accesses with the MMU off
(real mode) is very awkward on POWER.

This approach breaks when SLOF needs to access IO devices implemented
within KVM instead of in qemu.  The simplest example would be virtio-blk
using an iothread, because the iothread / dataplane mechanism relies on
an in-kernel implementation of the virtio queue notification MMIO.

To fix this, an in-kernel implementation of these hypercalls has been made,
(kernel commit 99342cf "kvmppc: Implement H_LOGICAL_CI_{LOAD,STORE} in KVM"
however, the hypercalls still need to be enabled from qemu.  This performs
the necessary calls to do so.

It would be nice to provide some warning if we encounter a problematic
device with a kernel which doesn't support the new calls.  Unfortunately,
I can't see a way to detect this case which won't either warn in far too
many cases that will probably work, or which is horribly invasive.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:55 +02:00
Nikunj A Dadhania
a34944fe2e spapr: override default ram size to 512MB
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:55 +02:00
Nikunj A Dadhania
076b35b5a5 machine: add default_ram_size to machine class
Machines types can have different requirement for default ram
size. Introduce a member in the machine class and set the current
default_ram_size to 128MB.

For QEMUMachine types override the value during the registration of
the machine and for MachineClass introduce the generic class init
setting the default_ram_size.

Add helpers [K,M,G,T,P,E]_BYTE for better readability and easy usage

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:55 +02:00
Tyrel Datwyler
c5bc152bc3 spapr_pci: emit hotplug add/remove events during hotplug
This uses extension of existing EPOW interrupt/event mechanism
to notify userspace tools like librtas/drmgr to handle
in-guest configuration/cleanup operations in response to
device_add/device_del.

Userspace tools that don't implement this extension will need
to be run manually in response/advance of device_add/device_del,
respectively.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:55 +02:00
Michael Roth
7454c7af91 spapr_pci: enable basic hotplug operations
This enables hotplug of PCI devices to a PHB. Upon hotplug we
generate the OF-nodes required by PAPR specification and
IEEE 1275-1994 "PCI Bus Binding to Open Firmware" for the
device.

We associate the corresponding FDT for these nodes with the DRC
corresponding to the slot, which will be fetched via
ibm,configure-connector RTAS calls by the guest as described by PAPR
specification.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:54 +02:00
Michael Roth
cf8c704d5a pci: make pci_bar useable outside pci.c
We need to work with PCI BARs to generate OF properties
during PCI hotplug for sPAPR guests.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:54 +02:00
Michael Roth
62083979b0 spapr_pci: create DRConnectors for each PCI slot during PHB realize
These will be used to support hotplug/unplug of PCI devices to the PCI
bus associated with a particular PHB.

We also set up device-tree properties in each PHBs initial FDT to
describe the DRCs associated with them. This advertises to guests that
each PHB is DR-capable device with physical hotpluggable slots, each
managed by the corresponding DRC. This is necessary for allowing
hotplugging of devices to it later via bus rescan or guest rpaphp
hotplug module.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:54 +02:00
Michael Roth
7619c7b00c spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge
This option enables/disables PCI hotplug for a particular PHB.

Also add machine compatibility code to disable it by default for machine
types prior to pseries-2.4.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: move commas for compat fields]
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:54 +02:00
Michael Roth
e4b798bb53 spapr_drc: add spapr_drc_populate_dt()
This function handles generation of ibm,drc-* array device tree
properties to describe DRC topology to guests. This will by used
by the guest to direct RTAS calls to manage any dynamic resources
we associate with a particular DR Connector as part of
hotplug/unplug.

Since general management of boot-time device trees are handled
outside of sPAPRDRConnector, we insert these values blindly given
an FDT and offset. A mask of sPAPRDRConnector types is given to
instruct us on what types of connectors entries should be generated
for, since descriptions for different connectors may live in
different parts of the device tree.

Based on code originally written by Nathan Fontenot.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:54 +02:00
Tyrel Datwyler
79853e18d9 spapr_events: event-scan RTAS interface
We don't actually rely on this interface to surface hotplug events, and
instead rely on the similar-but-interrupt-driven check-exception RTAS
interface used for EPOW events. However, the existence of this interface
is needed to ensure guest kernels initialize the event-reporting
interfaces which will in turn be used by userspace tools to handle these
events, so we implement this interface here.

Since events surfaced by this call are mutually exclusive to those
surfaced via check-exception, we also update the RTAS event queue code
to accept a boolean to mark/filter for events accordingly.

Events of this sort are not currently generated by QEMU, but the interface
has been tested by surfacing hotplug events via event-scan in place
of check-exception.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:53 +02:00
Nathan Fontenot
31fe14d15d spapr_events: re-use EPOW event infrastructure for hotplug events
This extends the data structures currently used to report EPOW events to
guests via the check-exception RTAS interfaces to also include event types
for hotplug/unplug events.

This is currently undocumented and being finalized for inclusion in PAPR
specification, but we implement this here as an extension for guest
userspace tools to implement (existing guest kernels simply log these
events via a sysfs interface that's read by rtas_errd, and current
versions of rtas_errd/powerpc-utils already support the use of this
mechanism for initiating hotplug operations).

We also add support for queues of pending RTAS events, since in the
case of hotplug there's chance for multiple events being in-flight
at any point in time.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:53 +02:00
Michael Roth
46503c2bc0 spapr_rtas: add ibm, configure-connector RTAS interface
This interface is used to fetch an OF device-tree nodes that describes a
newly-attached device to guest. It is called multiple times to walk the
device-tree node and fetch individual properties into a 'workarea'/buffer
provided by the guest.

The device-tree is generated by QEMU and passed to an sPAPRDRConnector during
the initial hotplug operation, and the state of these RTAS calls is tracked by
the sPAPRDRConnector. When the last of these properties is successfully
fetched, we report as special return value to the guest and transition
the device to a 'configured' state on the QEMU/DRC side.

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:53 +02:00
Michael Roth
ab316865db spapr: add rtas_st_buffer_direct() helper
This is similar to the existing rtas_st_buffer(), but for cases
where the guest is not expecting a length-encoded byte array.
Namely, for calls where a "work area" buffer is used to pass
around arbitrary fields/data.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:53 +02:00
Mike Day
886445a6ee spapr_rtas: add get-sensor-state RTAS interface
This interface allows a guest to read various platform/device sensors.
initially, we only implement support necessary to support hotplug:
reading of the dr-entity-sense sensor, which communicates the state of
a hotplugged resource/device to the guest (EMPTY/PRESENT/UNUSABLE).

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.

Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:53 +02:00
Mike Day
8c8639df32 spapr_rtas: add set-indicator RTAS interface
This interface allows a guest to control various platform/device
sensors. Initially, we only implement support necessary to control
sensors that are required for hotplug: DR connector indicators/LEDs,
resource allocation state, and resource isolation state.

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.

Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:53 +02:00
Nathan Fontenot
094d20585e spapr_rtas: add get/set-power-level RTAS interfaces
These interfaces manage the power domains that guest devices are
assigned to and are used to power on/off devices. Currently we
only utilize 1 power domain, the 'live-insertion' domain, which
automates power management of plugged/unplugged devices, essentially
making these calls no-ops, but the RTAS interfaces are still required
by guest hotplug code and PAPR+.

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
these interfaces.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:52 +02:00
Michael Roth
bbf5c878ab spapr_drc: initial implementation of sPAPRDRConnector device
This device emulates a firmware abstraction used by pSeries guests to
manage hotplug/dynamic-reconfiguration of host-bridges, PCI devices,
memory, and CPUs. It is conceptually similar to an SHPC device,
complete with LED indicators to identify individual slots to physical
physical users and indicate when it is safe to remove a device. In
some cases it is also used to manage virtualized resources, such a
memory, CPUs, and physical-host bridges, which in the case of pSeries
guests are virtualized resources where the physical components are
managed by the host.

Guests communicate with these DR Connectors using RTAS calls,
generally by addressing the unique DRC index associated with a
particular connector for a particular resource. For introspection
purposes we expose this state initially as QOM properties, and
in subsequent patches will introduce the RTAS calls that make use of
it. This constitutes to the 'guest' interface.

On the QEMU side we provide an attach/detach interface to associate
or cleanup a DeviceState with a particular sPAPRDRConnector in
response to hotplug/unplug, respectively. This constitutes the
'physical' interface to the DR Connector.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:52 +02:00
Michael Roth
11eec063f2 docs: add sPAPR hotplug/dynamic-reconfiguration documentation
This adds a general overview of hotplug/dynamic-reconfiguration
for sPAPR/pSeries guest.

As specified in PAPR+ v2.7.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:52 +02:00
Thomas Huth
730fce593b hw/ppc/spapr: Use error_report() instead of hw_error()
hw_error() is designed for printing CPU-related error messages
(e.g. it also prints a full CPU register dump). For error messages
that are not directly related to CPU problems, a function like
error_report() should be used instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:52 +02:00
Thomas Huth
68fea5a0d7 hw/ppc/spapr: Fix error message when firmware could not be loaded
When specifying a non-existing file with the "-bios" parameter, QEMU
complained that it "could not find LPAR rtas". That's obviously a
copy-n-paste bug from the code which loads the spapr-rtas.bin, it
should complain about a missing firmware file instead.
Additionally the error message was printed with hw_error() - which
also dumps the whole CPU state. However, this does not make much
sense here since the CPU is not running yet and thus the registers
only contain zeroes. So let's use error_report() here instead.
And while we're at it, let's also bail out if the firmware file
had zero length.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:52 +02:00