Commit Graph

609 Commits

Author SHA1 Message Date
Avi Kivity
a8170e5e97 Rename target_phys_addr_t to hwaddr
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-23 08:58:25 -05:00
Peter Maydell
02c7ac0c0f target-arm/neon_helper: Remove obsolete FIXME comment
Commit 33ebc29 fixed the bugs in the implementation of VQRSHL,
but forgot to remove the FIXME comment...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-19 10:32:24 +02:00
Peter Crosthwaite
b6348f29d0 target-arm/translate: Fix RRX operands
Instructions that both use the RRX second operand and update CS were
incorrect, as the Carry flag was updated too early. An example of such an
instruction would be:

ands r12,r13,RRX

Ands, because of the "s" flag will update the carry flag. But the RRX second
operand rotates through the C flag which should happen before the update.
Fixed the ordering of the two, the old carry is read by "r13,RRX" before being
updated.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reported-by: Vinesh Peringat <vineshp@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17 19:56:46 +02:00
Peter Maydell
1273d9ca09 target-arm: Drop unused DECODE_CPREG_CRN macro
This macro snuck through code review despite being unused; drop it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:45 +01:00
Aurelien Jarno
d593c48ef9 target-arm: use deposit instead of hardcoded version
Use the deposit op instead of and hardcoded bit field insertion. It
allows the host to emit the corresponding instruction if available.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:45 +01:00
Aurelien Jarno
00e3ab2db0 target-arm: mark a few integer helpers const and pure
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:45 +01:00
Aurelien Jarno
365af80e47 target-arm: convert sar, shl and shr helpers to TCG
Now that the movcond TCG op is available, it's possible to replace
shl and shr helpers by TCG code. The code generated by TCG is slightly
longer than the code generated by GCC for the helper but is still worth
it as this avoid all the consequences of using an helper: globals saved
back to memory, no possible optimization, call overhead, etc.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:44 +01:00
Aurelien Jarno
72485ec4f6 target-arm: convert add_cc and sub_cc helpers to TCG
Now that the setcond TCG op is available, it's possible to replace
add_cc and sub_cc helpers by TCG code. The code generated by TCG is
actually very close to the one generated by GCC for the helper, and
this avoid all the consequences of using an helper: globals saved back
to memory, no possible optimization, call overhead, etc.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:44 +01:00
Aurelien Jarno
66c374de8a target-arm: use globals for CC flags
Use globals for CC flags instead of loading/storing them each they are
accessed. This allows some optimizations to be performed by the TCG
optimization passes.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:44 +01:00
Peter Maydell
f2617cfc23 target-arm: Reinstate display of VFP registers in cpu_dump_state
Reinstate the display of VFP registers in cpu_dump_state(), if
the CPU has them (this code had been #if 0'd out a for a long time).
We drop the attempt ot display the values as floating point, since
this makes assumptions about the host 'float' and 'double' formats
and is not done by eg the i386 cpu_dump_state().
This display is gated on the CPU_DUMP_FPU flag, as for x86.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-05 15:04:44 +01:00
Richard Henderson
fdefe51c28 Emit debug_insn for CPU_LOG_TB_OP_OPT as well.
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.

This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-27 21:38:50 +02:00
Blue Swirl
d31dd73e48 target-arm: final conversion to AREG0 free mode
Convert code load functions and switch to AREG0 free mode.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-15 17:44:32 +00:00
Blue Swirl
9ef3927725 target-arm: convert remaining helpers
Convert remaining helpers to AREG0 free mode: add an explicit
CPUState parameter instead of relying on AREG0.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-15 17:44:32 +00:00
Blue Swirl
1ce94f81ec target-arm: convert void helpers
Add an explicit CPUState parameter instead of relying on AREG0.

For easier review, convert only op helpers which don't return any value.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-15 17:44:32 +00:00
Stefan Weil
599d64f6dc target-arm: Fix potential buffer overflow
Report from smatch:

target-arm/helper.c:651 arm946_prbs_read(6) error:
 buffer overflow 'env->cp15.c6_region' 8 <= 8
target-arm/helper.c:661 arm946_prbs_write(6) error:
 buffer overflow 'env->cp15.c6_region' 8 <= 8

c7_region is an array with 8 elements, so the index must be less than 8.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-10 15:00:06 +02:00
Jim Meyering
396bef4b38 arm-semi: don't leak 1KB user string lock buffer upon TARGET_SYS_OPEN
Always call unlock_user before returning.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-22 10:47:14 -05:00
Peter Maydell
b90372ad2a target-arm: Fix typos in comments
Fix a variety of typos in comments in target-arm files.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-10 14:37:28 +01:00
Peter A. G. Crosthwaite
656267413c arm: translate: comment typo - s/middel/middle/
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-10 14:33:16 +01:00
Peter Maydell
3dde962f39 target-arm: Add support for long format translation table walks
Implement the actual table walk code for LPAE's long format
translation tables.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
e42c4db3a3 target-arm: Implement TTBCR changes for LPAE
Implement the changes to the TTBCR register required for LPAE:
 * many fewer bits should be RAZ/WI
 * since TTBCR changes can result in a change of ASID, we must
   flush the TLB on writes to it

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
702a935789 target-arm: Implement long-descriptor PAR format
Implement the different format of the PAR when long descriptor
translation tables are in use. Note that we assume that
get_phys_addr() returns a long-descriptor format DFSR value on
failure if long descriptors are in use; this added subtlety tips
the balance and makes it worth adding a comment documenting the
API to get_phys_addr().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
77a71dd1cb target-arm: Use target_phys_addr_t in get_phys_addr()
In the implementation of get_phys_addr(), consistently use
target_phys_addr_t to hold the physical address rather than
uint32_t.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
891a2fe720 target-arm: Add 64 bit PAR, TTBR0, TTBR1 for LPAE
Under LPAE, the cp15 registers PAR, TTBR0 and TTBR1 are extended
to 64 bits, with a 64 bit (MRRC/MCRR) access path to read the
full width of the register. Add the state fields for the top
half and the 64 bit access path. Actual use of the top half of
the register will come with the addition of the long-descriptor
translation table format support.

For the PAR we also need to correct the masking applied for
32 bit writes (there are no bits reserved if LPAE is implemented)
and clear the high half when doing a 32 bit result VA-to-PA
lookup.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
f9fc619a0d target-arm: Add 64 bit variants of DBGDRAR and DBGDSAR for LPAE
LPAE extends the DBGDRAR and DBGDSAR debug registers to 64 bits; we
only implement these as dummy RAZ versions; provide dummies for
the 64 bit accesses as well.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
7ac681cf2a target-arm: Add AMAIR0, AMAIR1 LPAE cp15 registers
Add implementations of the AMAIR0 and AMAIR1 LPAE
Auxiliary Memory Attribute Indirection Registers.
These are implementation defined and we choose to
implement them as RAZ/WI, matching the Cortex-A7
and Cortex-A15.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
918f5dca18 target-arm: Extend feature flags to 64 bits
Extend feature flags to 64 bits, as we've just run out of space
in the 32 bit integer we were using for them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
de9b05b807 target-arm: Implement privileged-execute-never (PXN)
Implement the privileged-execute-never (PXN) translation table bit.
It is implementation-defined whether this is implemented, so we give
it its own ARM_FEATURE_ flag. LPAE requires PXN, so add also an
LPAE feature flag and the implication logic, as a placeholder
for actually implementing LPAE at a later date.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:54 +00:00
Peter Maydell
3cc0cd61f4 ARM: Make target_phys_addr_t 64 bits and physaddrs 40 bits
Make target_phys_addr_t 64 bits for ARM targets, and set
TARGET_PHYS_ADDR_SPACE_BITS to 40.  This should have no effect for ARM
boards where physical addresses really are 32 bits (except perhaps a
slight performance hit on 32 bit hosts for system emulation) but allows
us to implement the Large Physical Address Extensions for Cortex-A15,
which mean 40 bit physical addresses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:53 +00:00
Peter Maydell
ed336850e8 target-arm: Fix TCG temp handling in 64 bit cp writes
Fix errors in the TCG temp handling in the 64 bit coprocessor
write path: we were reusing a 32 bit temp after it had been
freed by store_reg(), and failing to free a 64 bit temp.

This bug has no visible effect at this point because there
aren't any non-NOP 64 bit registers yet; it needs to be fixed
as a prerequisite for the 64 bit registers in LPAE support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:59:53 +00:00
Peter Maydell
091fd17ce8 target-arm: Fix some copy-and-paste errors in cp register names
Fix a couple of cases where cp register names were copy-and-pasted.
These are harmless since we don't use the name for anything (except
debugging convenience) but could be confusing.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
2012-07-12 10:58:36 +00:00
Peter Maydell
81a60ada7e target-arm: Fix typo that meant TTBR1 accesses went to TTBR0
Fix a copy-and-paste error in the register description for TTBR1
that meant it was a duplicate of TTBR0 rather than affecting the
correct bit of CPU state.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:58:36 +00:00
Paul Brook
2bee510548 target-arm: Fix CP15 based WFI
The coprocessor register rework broke cp15 based WFI instructions.
We incorrectly fall through the normal register write case, which
incorrectly adds a forced block termination.  We've already done
a special version of this (DISAS_WFI), so return immediately.

Signed-off-by: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-12 10:58:35 +00:00
Peter Maydell
b2d06f9607 target-arm: Remove ARM_CPUID_* macros
All the uses of ARM_CPUID() to vary behaviour have now been
removed, so we can delete the ARM_CPUID_* macros now.
The one exception is the TI915T/925T, because of its odd behaviour
where the MIDR value can be changed at runtime.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-06-20 12:13:28 +00:00
Peter Maydell
4a9a539ffb target-arm: Remove remaining old cp15 infrastructure
There are now no uses of the old cp15 infrastructure,
so it can be deleted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:13:04 +00:00
Peter Maydell
30b05bba11 target-arm: Move block cache ops to new cp15 framework
Move the v6 optional block cache ops to the new cp15 framework.
This includes only providing them on the CPUs which implemented
them, rather than the previous blunderbuss approach of making
all MCRR instructions on all CPUs act as NOPs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:12:41 +00:00
Peter Maydell
b22af022b2 target-arm: Remove c0_cachetype CPUARMState field
Remove the no-longer-used CPUARMState c0_cachetype field.
Although this was a constant register we had it in our
migration state. Drop this (with resulting version bump)
because for ARM currently we prefer cleaner migration
code and have not stabilised migration format yet.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:11:49 +00:00
Peter Maydell
7884849cc5 target-arm: Convert final ID registers
Convert the final ID registers to the new cp15 scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:11:45 +00:00
Peter Maydell
81bdde9dcd target-arm: Convert MPIDR
Convert the MPIDR to the new cp15 register scheme.
This includes giving it its own feature bit rather
than doing a CPUID value check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:10:54 +00:00
Peter Maydell
776d4e5c6c target-arm: Convert cp15 cache ID registers
Convert the cp15 cache ID registers to the new scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:10:05 +00:00
Peter Maydell
8515a09294 target-arm: Convert cp15 crn=0 crm={1,2} feature registers
Convert the cp15 crn=0 crm={1,2} features registers to
the new cp reg framework.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:09:11 +00:00
Peter Maydell
2771db2741 target-arm: Convert cp15 crn=1 registers
Convert the cp15 crn=1 registers to the new scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:08:22 +00:00
Peter Maydell
34f9052967 target-arm: Convert cp15 crn=9 registers
Convert cp15 crn=9 registers (mostly cache lockdown) to the new scheme.

Note that this change makes OMAPCP cores RAZ/WI the whole c9 space.  This is
a change from previous behaviour, but a return to the behaviour of commit
c3d2689d when OMAP1 support was first added -- subsequent commits have
clearly accidentally relegated the OMAPCP RAZ condition to only a subset of
the crn=9 space when adding support for other cores.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:08:16 +00:00
Peter Maydell
06d76f319f target-arm: Convert cp15 crn=6 registers
Convert the cp15 crn=6 registers to the new scheme.
Note that this includes some minor tidyup: drop an unnecessary
underdecoding of op2 on OMAPCP cores, and only implement the
pre-v6 c6,c0,0,1 IFAR on the 1026 and not on the other ARMv5
cores, which didn't have it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:08:11 +00:00
Peter Maydell
c480421426 target-arm: convert cp15 crn=7 registers
Convert the cp15 crn=7 registers to the new scheme.
Note that to do this we have to distinguish some registers
used on the ARM9 and ARM10 from some which are ARM1176
only. This is because the old code returned a value of 0
but always set the Z flag (by clearing env->ZF, since we
store the Z flag in CPUState inverted). This is inconsistent
with actual ARM CPU behaviour, which only sets flags for
reads to r15 and sets them based on the top bits of the result.
However it happened to work for the two common use cases for
cp15 crn=7 reads:
 * On ARM9 and ARM10 the cache clean-and-test operations are
typically done with a destination of r15 so that you can do
a "loop: mrc ... ; bne loop" to keep cleaning until the cache
is finally clean; always setting the Z flag means this loop
terminates immediately
 * on ARM1176 the Cache Dirty Status Register reads as zero
if the cache is dirty; returning 0 means this is correctly
implemented for QEMU

Since the new coprocessor register framework does the right
thing of always setting flags based on the returned result
for reads to r15, we need to split these up so that we can
return (1<<30) for the ARM9/ARM10 registers but 0 for the
ARM1176 one.

This allows us to remove the nasty hack which always sets Z.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:07:11 +00:00
Peter Maydell
4a50160666 target-arm: Convert cp15 VA-PA translation registers
Convert the cp15 VA-PA translation registers (a subset of
the crn=7 regs) to the new scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:07:05 +00:00
Peter Maydell
d929823fa1 target-arm: Convert cp15 MMU TLB control
Convert cp15 MMU TLB control (crn=8) to new scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:07:00 +00:00
Peter Maydell
1047b9d7bb target-arm: Convert cp15 crn=15 registers
Convert the cp15 crn=15 (implementation specific) registers
to the new scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:06:09 +00:00
Peter Maydell
4fdd17dd35 target-arm: Convert cp15 crn=10 registers
We RAZ/WI the entire block of crn=10 registers. Note that this
actually covers not just the implementation-defined TLB
lockdown registers but also a number of v7 VMSA memory
attribute registers which we would need to implement to
support TEX remap. We retain the previous QEMU behaviour
in this conversion, though.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:06:05 +00:00
Peter Maydell
08de207bc5 target-arm: Convert cp15 crn=13 registers
Convert the cp15 crn=13 registers (FCSEIDR, CONTEXTIDR,
and the ARM946 Trace Process Identifier Register).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:06:01 +00:00
Peter Maydell
ecce5c3c90 target-arm: Convert cp15 crn=2 registers
Convert the cp15 crn=2 registers (MMU page table control,
MPU cache control) to the new scheme.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20 12:05:56 +00:00