This way there aren't stale flags there.
p->flags can't contain SYNC to be sent at the next RAM packet since syncs
are now handled separately in multifd_send_thread.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/1c96b6cdb797e6f035eb1a4ad9bfc24f4c7f5df8.1730203967.git.maciej.szmigiero@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Now with the current migration_is_running(), it will report exactly the
opposite of what will be reported by migration_is_idle().
Drop migration_is_idle(), instead use "!migration_is_running()" which
should be identical on functionality.
In reality, most of the idle check is inverted, so it's even easier to
write with "migrate_is_running()" check.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241024213056.1395400-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This helper is mostly the same as migration_is_running(), except that one
has COLO reported as true, the other has CANCELLING reported as true.
Per my past years experience on the state changes, none of them should
matter.
To make it slightly safer, report both COLO || CANCELLING to be true in
migration_is_running(), then drop the other one. We kept the 1st only
because the name is simpler, and clear enough.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241024213056.1395400-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It's only used within migration/, so it shouldn't be exported.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241024213056.1395400-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Both migration thread or background snapshot thread will take a refcount of
the migration object at the entrace of the thread function.
That makes sense, because it protects the object from being freed by the
main thread in migration_shutdown() later, but it might still race with it
if the thread is scheduled too late. Consider the case right after
pthread_create() happened, VM shuts down with the object released, but
right after that the migration thread finally got created, referencing
MigrationState* in the opaque pointer which is already freed.
The only 100% safe way to make sure it won't get freed is taking the
refcount right before the thread is created, meanwhile when BQL is held.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241024213056.1395400-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The linker on OpenBSD complains:
ld: warning: dirtyrate.c:447 (../src/migration/dirtyrate.c:447)(...):
warning: strcpy() is almost always misused, please use strlcpy()
It's currently not a real problem in this case since both arrays
have the same size (256 bytes). But just in case somebody changes
the size of the source array in the future, let's better play safe
and use g_strlcpy() here instead, with an additional check that the
string has been copied as a whole.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hyman Huang <yong.huang@smartx.com>
Link: https://lore.kernel.org/r/20241022063402.184213-1-thuth@redhat.com
[peterx: Fix over-80 chars]
Signed-off-by: Peter Xu <peterx@redhat.com>
When VM is configured with huge memory, the current throttle logic
doesn't look like to scale, because migration_trigger_throttle()
is only called for each iteration, so it won't be invoked for a long
time if one iteration can take a long time.
The periodic dirty sync aims to fix the above issue by synchronizing
the ramblock from remote dirty bitmap and, when necessary, triggering
the CPU throttle multiple times during a long iteration.
This is a trade-off between synchronization overhead and CPU throttle
impact.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/f61f1b3653f2acf026901103e1c73d157d38b08f.1729146786.git.yong.huang@smartx.com
[peterx: make prev_cnt global, and reset for each migration]
Signed-off-by: Peter Xu <peterx@redhat.com>
The global static variable ram_state in fact is referred to by the
"rs" parameter in migration_bitmap_sync_precopy. For ease of calling
by the callees, use the global variable directly in
migration_bitmap_sync_precopy and remove "rs" parameter.
The migration_bitmap_sync_precopy will be exported in the next commit.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/283c335d61463bf477160da91b24da45cdaf3e43.1729146786.git.yong.huang@smartx.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Move cpu-throttle.c from system to migration since it's
only used for migration; this makes us avoid exporting the
util functions and variables in misc.h but export them in
migration.h when implementing the periodic ramblock dirty
sync feature in the upcoming commits.
Since CPU throttle timers are only used in migration, move
their registry to migration_object_init.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/c1b3efaa0cb49e03d422e9da97bdb65cc3d234d1.1729146786.git.yong.huang@smartx.com
[peterx: Fix build on MacOS on cocoa.m, not move cpu-throttle.h yet]
[peterx: Fix subject spelling, per pm215]
Signed-off-by: Peter Xu <peterx@redhat.com>
migration/savevm.c contains some calls to vmstate_save() that are
followed by migrate_set_error() if the integer return value indicates an
error. migrate_set_error() requires that the `Error *` object passed to
it is set. Therefore, vmstate_save() is assumed to always set *errp on
error.
Right now, that assumption is not met: vmstate_save_state_v() (called
internally by vmstate_save()) will not set *errp if
vmstate_subsection_save() or vmsd->post_save() fail. Fix that by adding
an *errp parameter to vmstate_subsection_save(), and by generating a
generic error in case post_save() fails (as is already done for
pre_save()).
Without this patch, qemu will crash after vmstate_subsection_save() or
post_save() have failed inside of a vmstate_save() call (unless
migrate_set_error() then happen to discard the new error because
s->error is already set). This happens e.g. when receiving the state
from a virtio-fs back-end (virtiofsd) fails.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/r/20241015170437.310358-1-hreitz@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Keep migration thread names together, so it's easier to see a list of all
possible migration threads.
Still two functional changes below besides the macro defintions:
- There's one dirty rate thread that we overlooked before, now we add
that too and name it as "mig/dirtyrate" following the old rules.
- The old name "mig/src/rp-thr" has "-thr" but it may not be useful if
it's a thread name anyway, while "rp" can be slightly hard to read.
Taking this chance to rename it to "mig/src/return", hopefully a better
name.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Link: https://lore.kernel.org/r/20241011153652.517440-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The cleanup function can in many cases needs cleanup on its own.
The major thing we want to do here is not referencing to_dst_file when
without the file mutex. When at it, touch things elsewhere too to make it
look slightly better in general.
One thing to mention is, migration_thread has its own "running" boolean, so
it doesn't need to rely on to_dst_file being non-NULL. Multifd has a
dependency so it needs to be skipped if to_dst_file is not yet set; add a
richer comment for such reason.
Resolves: Coverity CID 1527402
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240919163042.116767-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The page_size member has been removed from the MultiFDSendParams
and MultiFDRecvParams. The function multifd_ram_page_size is used to
provide the page size in the multifd compressor.
Fixes: 90fa121c6c ("migration/multifd: Inline page_size and page_count")
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Link: https://lore.kernel.org/r/20241008104527.3516755-1-yuan1.liu@intel.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Use the uffd_copy_page, uffd_zero_page and uffd_wakeup helpers
rather than calling ioctl ourselves.
They return -errno on error, and print an error_report themselves.
I think this actually makes postcopy_place_page actually more
consistent in it's callers.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240919134626.166183-7-dave@treblig.org
[peterx: fix i386 build]
Signed-off-by: Peter Xu <peterx@redhat.com>
socket_send_channel_create_sync only use was removed by
d0edb8a173 ("migration: Create the postcopy preempt channel asynchronously")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240919134626.166183-5-dave@treblig.org
Signed-off-by: Peter Xu <peterx@redhat.com>
The zero-blocks capability was meant to be used along with the block
migration, which has been removed already in commit eef0bae3a7
("migration: Remove block migration").
Setting zero-blocks is currently a noop, but the outright removal of
the capability would cause and error in case some users are still
setting it. Put the capability through the deprecation process.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240919134626.166183-4-dave@treblig.org
Signed-off-by: Peter Xu <peterx@redhat.com>
migrate_zero_blocks is unused since
eef0bae3a7 ("migration: Remove block migration")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240919134626.166183-3-dave@treblig.org
Signed-off-by: Peter Xu <peterx@redhat.com>
migrate_cap_set has been unused since
18d154f575 ("migration: Remove 'blk/-b' option from migrate commands")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240919134626.166183-2-dave@treblig.org
Signed-off-by: Peter Xu <peterx@redhat.com>
Coverity points out that the current usage of strncpy to write the
ramblock name allows the field to not have an ending '\0' in case
idstr is already not null-terminated (e.g. if it's larger than 256
bytes).
This is currently harmless because the packet->ramblock field is never
touched again on the source side. The destination side reads only up
to the field's size from the stream and forces the last byte to be 0.
We're still open to a programming error in the future in case this
field is ever passed into a function that expects a null-terminated
string.
Change from strncpy to QEMU's pstrcpy, which puts a '\0' at the end of
the string and doesn't fill the extra space with zeros.
(there's no spillage between iterations of fill_packet because after
commit 87bb9e953e ("migration/multifd: Isolate ram pages packet data")
the packet is always zeroed before filling)
Resolves: Coverity CID 1560071
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240919150611.17074-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
../migration/ram.c:1873:23: error: ‘dirty’ may be used uninitialized [-Werror=maybe-uninitialized]
When 'block' != NULL, 'dirty' is initialized.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
../migration/dirtyrate.c:186:5: error: ‘records’ may be used uninitialized [-Werror=maybe-uninitialized]
../migration/dirtyrate.c:168:12: error: ‘gen_id’ may be used uninitialized [-Werror=maybe-uninitialized]
../migration/migration.c:2273:5: error: ‘file’ may be used uninitialized [-Werror=maybe-uninitialized]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Hyman Huang <yong.huang@smartx.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240919044641.386068-31-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-14-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240919044641.386068-5-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix a segmentation fault in multifd when rb->receivedmap is cleared
too early.
After commit 5ef7e26bdb ("migration/multifd: solve zero page causing
multiple page faults"), multifd started using the rb->receivedmap
bitmap, which belongs to ram.c and is initialized and *freed* from the
ram SaveVMHandlers.
Multifd threads are live until migration_incoming_state_destroy(),
which is called after qemu_loadvm_state_cleanup(), leading to a crash
when accessing rb->receivedmap.
process_incoming_migration_co() ...
qemu_loadvm_state() multifd_nocomp_recv()
qemu_loadvm_state_cleanup() ramblock_recv_bitmap_set_offset()
rb->receivedmap = NULL set_bit_atomic(..., rb->receivedmap)
...
migration_incoming_state_destroy()
multifd_recv_cleanup()
multifd_recv_terminate_threads(NULL)
Move the loadvm cleanup into migration_incoming_state_destroy(), after
multifd_recv_cleanup() to ensure multifd threads have already exited
when rb->receivedmap is cleared.
Adjust the postcopy listen thread comment to indicate that we still
want to skip the cpu synchronization.
CC: qemu-stable@nongnu.org
Fixes: 5ef7e26bdb ("migration/multifd: solve zero page causing multiple page faults")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240917185802.15619-3-farosas@suse.de
[peterx: added comment in migration_incoming_state_destroy()]
Signed-off-by: Peter Xu <peterx@redhat.com>
There are two qemu_loadvm_state_cleanup() calls that were introduced
when qemu_loadvm_state_setup() was still called before loading the
configuration section, so there was state to be cleaned up if the
header checks failed.
However, commit 9e14b84908 ("migration/savevm: load_header before
load_setup") has moved that configuration section part to
qemu_loadvm_state_header() which now happens before
qemu_loadvm_state_setup().
Remove the cleanup calls that are now misplaced.
Note that we didn't use Fixes because it's benign to cleanup() even if
setup() is not invoked. So this patch is not needed for stable, as it
falls into cleanup category.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240917185802.15619-2-farosas@suse.de
[peterx: added last paragraph of commit message]
Signed-off-by: Peter Xu <peterx@redhat.com>
GitHub's CodeQL reports four critical errors which are fixed by this commit:
Unsigned difference expression compared to zero
An expression (u - v > 0) with unsigned values u, v is only false if u == v,
so all changed expressions did not work as expected.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Link: https://lore.kernel.org/r/20240910054138.1458555-1-sw@weilnetz.de
[peterx: Fix mangled email for author]
Signed-off-by: Peter Xu <peterx@redhat.com>
The qatzip series was based on an older commit, it applied cleanly even
though it has conflicts. Neither CI nor myself found the build will break
as it's skipped by default when qatzip library was missing.
Fix the build issues. No need to copy stable as it just landed 9.2.
Cc: Yichen Wang <yichen.wang@bytedance.com>
Cc: Bryan Zhang <bryan.zhang@bytedance.com>
Cc: Hao Xiang <hao.xiang@linux.dev>
Cc: Yuan Liu <yuan1.liu@intel.com>
Fixes: 80484f9459 ("migration: Introduce 'qatzip' compression method")
Link: https://lore.kernel.org/r/20240910210450.3835123-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Adds support for 'qatzip' as an option for the multifd compression
method parameter, and implements using QAT for 'qatzip' compression and
decompression.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com>
Signed-off-by: Hao Xiang <hao.xiang@linux.dev>
Signed-off-by: Yichen Wang <yichen.wang@bytedance.com>
Link: https://lore.kernel.org/r/20240830232722.58272-5-yichen.wang@bytedance.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add documentation clarifying the usage of the multifd methods. The
general idea is that the client code calls into multifd to trigger
send/recv of data and multifd then calls these hooks back from the
worker threads at opportune moments so the client can process a
portion of the data.
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Check that p->iov is indeed always allocated and freed by the
MultiFDMethods hooks.
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The send_cleanup() hook should free the p->iov that was allocated at
send_setup(). This was missed because the UADK code is conditional on
the presence of the accelerator, so it's not tested by default.
Fixes: 819dd20636 ("migration/multifd: Add UADK initialization")
Reported-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
As observed by Philippe, the multifd_ram_unfill_packet() function
currently leaves the MultiFDPacket structure with mixed
endianness. This is harmless, but ultimately not very clean.
Stop touching the received packet and do the necessary work using
stack variables instead.
While here tweak the error strings and fix the space before
semicolons. Also remove the "100 times bigger" comment because it's
just one possible explanation for a size mismatch and it doesn't even
match the code.
CC: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The methods are defined at module_init time and don't ever
change. Make them const.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In preparation for adding new payload types to multifd, move most of
the no-compression code into multifd-nocomp.c. Let's try to keep a
semblance of layering by not mixing general multifd control flow with
the details of transmitting pages of ram.
There are still some pieces leftover, namely the p->normal, p->zero,
etc variables that we use for zero page tracking and the packet
allocation which is heavily dependent on the ram code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Prior to moving the ram code into multifd-nocomp.c, change the code to
register the nocomp ops dynamically so we don't need to have the ops
structure defined in multifd.c.
While here, move the ops struct initialization to the end of the file
to make the next diff cleaner.
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add the multifd_ prefix to all functions and remove the useless
docstrings.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Separate the multifd sync from flushing the client data to the
channels. These two operations are closely related but not strictly
necessary to be executed together.
The multifd sync is intrinsic to how multifd works. The multiple
channels operate independently and may finish IO out of order in
relation to each other. This applies also between the source and
destination QEMU.
Flushing the data that is left in the client-owned data structures
(e.g. MultiFDPages_t) prior to sync is usually the right thing to do,
but that is particular to how the ram migration is implemented with
several passes over dirty data.
Make these two routines separate, allowing future code to call the
sync by itself if needed. This also allows the usage of
multifd_ram_send to be isolated to ram code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Multifd currently has a simple scheduling mechanism that distributes
work to the various channels by keeping storage space within each
channel and an extra space that is given to the client. Each time the
client fills the space with data and calls into multifd, that space is
given to the next idle channel and a free storage space is taken from
the channel and given to client for the next iteration.
This means we always need (#multifd_channels + 1) memory slots to
operate multifd.
This is fine, except that the presence of this one extra memory slot
doesn't allow different types of payloads to be processed at the same
time in different channels, i.e. the data type of
multifd_send_state->pages needs to be the same as p->pages.
For each new data type different from MultiFDPage_t that is to be
handled, this logic would need to be duplicated by adding new fields
to multifd_send_state, to the channels and to multifd_send_pages().
Fix this situation by moving the extra slot into the client and using
only the generic type MultiFDSendData in the multifd core.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Skip saving and loading any ram data in the packet in the case of a
SYNC. This fixes a shortcoming of the current code which requires a
reset of the MultiFDPages_t fields right after the previous
pending_job finishes, otherwise the very next job might be a SYNC and
multifd_send_fill_packet() will put the stale values in the packet.
By not calling multifd_ram_fill_packet(), we can stop resetting
MultiFDPages_t in the multifd core and leave that to the client code.
Actually moving the reset function is not yet done because
pages->num==0 is used by the client code to determine whether the
MultiFDPages_t needs to be flushed. The subsequent patches will
replace that with a generic flag that is not dependent on
MultiFDPages_t.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
While we cannot yet disentangle the multifd packet from page data, we
can make the code a bit cleaner by setting the page-related fields in
a separate function.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The total_normal_pages and total_zero_pages elements are used only for
the end tracepoints of the multifd threads. These are not super useful
since they record per-channel numbers and are just the sum of all the
pages that are transmitted per-packet, for which we already have
tracepoints. Remove the totals from the tracing.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
All references to pages are being removed from the multifd worker
threads in order to allow multifd to deal with different payload
types.
multifd_send_zero_page_detect() is called by all multifd migration
paths that deal with pages and is the last spot where zero pages and
normal page amounts are adjusted. Move the pages accounting into that
function.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We want multifd to be able to handle more types of data than just ram
pages. To start decoupling multifd from pages, replace p->pages
(MultiFDPages_t) with the new type MultiFDSendData that hides the
client payload inside an union.
The general idea here is to isolate functions that *need* to handle
MultiFDPages_t and move them in the future to multifd-ram.c, while
multifd.c will stay with only the core functions that handle
MultiFDSendData/MultiFDRecvData.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We're about to use MultiFDPages_t from inside the MultiFDSendData
payload union, which means we cannot have pointers to allocated data
inside the pages structure, otherwise we'd lose the reference to that
memory once another payload type touches the union. Move the offset
array into the end of the structure and turn it into a flexible array
member, so it is allocated along with the rest of MultiFDSendData in
the next patches.
Note that other pointers, such as the ramblock pointer are still fine
as long as the storage for them is not owned by the migration code and
can be correctly released at some point.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a new data structure to replace p->pages in the multifd
channel. This new structure will hide the multifd payload type behind
an union, so we don't need to add a new field to the channel each time
we want to handle a different data type.
This also allow us to keep multifd_send_pages() as is, without needing
to complicate the pointer switching.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
