Commit Graph

11655 Commits

Author SHA1 Message Date
Gerd Hoffmann
9049f8bc44 virtio-gpu: handle partial maps properly
dma_memory_map() may map only a part of the request.  Happens if the
request can't be mapped in one go, for example due to a iommu creating
a linear dma mapping for scattered physical pages.  Should that be the
case virtio-gpu must call dma_memory_map() again with the remaining
range instead of simply throwing an error.

Note that this change implies the number of iov entries may differ from
the number of mapping entries sent by the guest.  Therefore the iov_len
bookkeeping needs some updates too, we have to explicitly pass around
the iov length now.

Reported-by: Auger Eric <eric.auger@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210506091001.1301250-1-kraxel@redhat.com
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210506091001.1301250-1-kraxel@redhat.com>
2021-05-10 13:51:11 +02:00
Akihiko Odaki
fce39fa737 edid: Make refresh rate configurable
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20210427150824.638359-1-kraxel@redhat.com
Message-Id: <20210427150824.638359-6-kraxel@redhat.com>
2021-05-10 11:41:02 +02:00
Peter Maydell
d90f154867 ppc patch queue 2021-05-04
Here's the first ppc pull request for qemu-6.1.  It has a wide variety
 of stuff accumulated during the 6.0 freeze.  Highlights are:
 
  * Multi-phase reset cleanups for PAPR
  * Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
  * Cleanup of AIL logic and extension to POWER10
  * Further improvements to handling of hot unplug failures on PAPR
  * Allow much larger numbers of CPU on pseries
  * Support for the H_SCM_HEALTH hypercall
  * Add support for the Pegasos II board
  * Substantial cleanup to hflag handling
  * Assorted minor fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAmCQ4ScACgkQbDjKyiDZ
 s5KmNhAAsICdDqeu/jm1uhRCr0DDT/Wa6KE1xlglQ53ybWb5Hm2ae0Uwzti5ZWkt
 T9yryObX++wiugbU5Dlx9eXTiJIPgTbDoBV1wfOa3a1BAxSEES1t70jwuwAXXBpX
 mgU++SurQB70IB7vVvyXDi2Z592qGvMiKXqT0sdkfoexPHzAL0+KkQPyJZLeFchM
 Ap/zRHAodXf9SuWAl+LwLXeb350jivXYXBWNcFRrBbOGpbVT0AJMYrk/TEa2ZIpi
 SvbzAWuW+9mX0EOmk7JK5JfkT41cGNdcBcwd0bt4xyvUpmkXLaTMFDLVHj3HWSUn
 PFA4RB3uKXyTfISVtWdxJBbFOzMpchI6lEiRJHCS+KuY7UsACqV1T/y54ATOUauC
 ycLc9APgRaStdNPxfDl+xeFfoVb/f0mQsNwcmY1tv7z+3qE/trY9bMyrbgaebBFn
 /TAkmPvXfwtAREnx8xF/57poarWUkvupGTQkANNosdFokpExmrLj8T0sKv90hh5Y
 vkGf5zP4pYGN1Rs8qhOdHu+IjhVJvUl/L3LZYWcoMI6E61D8rGRc0Dkacx7gcja+
 sluFi5Yh2fQn55y6LTi3049cB1wMd6wly0214F11RKoBswguiGuaqJmL4sNDO/s4
 IcMCy5mg6C0jNZA5kHcdWmqsVzD2+XwP5J29n/LedlmgXoHYF+M=
 =N0qr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' into staging

ppc patch queue 2021-05-04

Here's the first ppc pull request for qemu-6.1.  It has a wide variety
of stuff accumulated during the 6.0 freeze.  Highlights are:

 * Multi-phase reset cleanups for PAPR
 * Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
 * Cleanup of AIL logic and extension to POWER10
 * Further improvements to handling of hot unplug failures on PAPR
 * Allow much larger numbers of CPU on pseries
 * Support for the H_SCM_HEALTH hypercall
 * Add support for the Pegasos II board
 * Substantial cleanup to hflag handling
 * Assorted minor fixes and cleanups

# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
  hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
  hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
  hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
  target/ppc: removed VSCR from SPR registration
  target/ppc: Reduce the size of ppc_spr_t
  target/ppc: Clean up _spr_register et al
  target/ppc: Add POWER10 exception model
  target/ppc: rework AIL logic in interrupt delivery
  target/ppc: move opcode table logic to translate.c
  target/ppc: code motion from translate_init.c.inc to gdbstub.c
  spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
  spapr.h: increase FDT_MAX_SIZE
  spapr.c: do not use MachineClass::max_cpus to limit CPUs
  ppc: Rename current DAWR macros and variables
  target/ppc: POWER10 supports scv
  target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
  docs/system: ppc: Add documentation for ppce500 machine
  roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
  roms/Makefile: Update ppce500 u-boot build directory name
  ppc/spapr: Add support for implement support for H_SCM_HEALTH
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-05 20:29:14 +01:00
Peter Maydell
d45a5270d0 Trivial patches pull request 20210503
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmCPtbASHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748I3wP/Al7yi77BMpts1t3lGMm7EBjKgkppnpr
 wZYEM68bJonvvGiEKQjexn1CUfnDcq7f5SZkzcUNLI4oP57pyywb4/gshN0k/Zz8
 uCDveMfnhbio2sqlXiMsH9TOhcv/4wtXAek/ghP7EOjkBvyXrAFIQ7eEPEB9cp+X
 xxs9DxqfWmrGB6vt7Er78zjfUETSMa+UrheVLwbRMhJcc0Bg8hT2DCn9Lw6IjfOy
 usWdrLTGc6qg1zdZzi8QR7jZ+bNx0h+aJLlm8M4cVitXq9v2wb3+6KdsOAeYioAE
 AsnClw0m8j/xtMh3g4/hB4oCxMj0jRdZ9GIGs8Didw5ZwkXTRvFM1GK1PHxqX4pF
 8xMW6Qq0bSUr4II6bPOukBUMUAnPYdkh+iHXsYSZG0I3u6VZLgMK3AXmKRukAYqe
 kQ1lcRe3Lwsp2h+jMBBsbCWhwYdA3THFO4YO31cUaZ191A7z57905QMbqJG/H3HB
 7IUBYBNbrhgysPsNBvY6Lr7yUJIocMgcfP36UHYcBPsDdZgjNCQZneJlkaRlQb8+
 CtUSF8D614EguzGsWaIn3uBSm9THKKLd1rSXCyTSgrXDI285mXlKmEWZvm236ew0
 OEmIz/Ach/R4268j76enYGa1aubsxnrphUfC3aePu0Wzd3QW4RxnCSq7wc4ARPw7
 WTL7J00P578h
 =aCeG
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210503

# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
  hw/rx/rx-gdbsim: Do not accept invalid memory size
  docs: More precisely describe memory-backend-*::id's user
  scripts: fix generation update-binfmts templates
  docs/system: Document the removal of "compat" property for POWER CPUs
  mc146818rtc: put it into the 'misc' category
  Do not include exec/address-spaces.h if it's not really necessary
  Do not include cpu.h if it's not really necessary
  Do not include hw/boards.h if it's not really necessary
  Do not include sysemu/sysemu.h if it's not really necessary
  hw: Do not include qemu/log.h if it is not necessary
  hw: Do not include hw/irq.h if it is not necessary
  hw: Do not include hw/sysbus.h if it is not necessary
  hw: Remove superfluous includes of hw/hw.h
  ui: Fix memory leak in qemu_xkeymap_mapping_table()
  hw/usb: Constify VMStateDescription
  hw/display/qxl: Constify VMStateDescription
  hw/arm: Constify VMStateDescription
  vmstate: Constify some VMStateDescriptions
  Fix typo in CFI build documentation
  hw/pcmcia: Do not register PCMCIA type if not required
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-05 13:52:00 +01:00
Peter Maydell
87c6cef605 Aspeed patches :
* Fixes for the DMA space
 * New model for ASPEED's Hash and Crypto Engine (Joel and Klaus)
 * Acceptance tests (Joel)
 * A fix for the XDMA  model
 * Some extra features for the SMC controller.
 * Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmCPiNgACgkQUaNDx8/7
 7KGqBhAAviQHW0A4UPGi91uGq6wN1V4skbdMJIGnvOVnkOH1aRySPfnwiRRYimpc
 /3re+dLzu/zf/ehwdJd7nk3zLG2HR3A+Lw0fdBR2gGvuQwyUz/D+34yR43eJ8ju4
 HcuOVfo9ZeSIJZPZTHfHD/0/AhNxKCUv7PiV2T3XukGcaiuQKbQIlfY73LDjIIkS
 O5FT5IxknCXNWJ4eS8C04EsLzdkdxdZ1QsnaNyhLIywzdO5wThWQ6YE1AK1VPVES
 yGiJMRXcXHDicmwru9jZIDG3jiiEO01FUG6hBTB2qA/OaXVark/uw55+qsEwRuEv
 NYznDwEVwmN1CB5oGP+MbRlwyyJoirLlJ35FB3KC3OciZCRbrzHA1OtxsqlDf9eJ
 K4j3M51CuhU5D9AJ+77BxZewHN2RugIvvlSyQ8FP+mbbvDIBbiiY3mkks7pLpgRh
 U33HxOGmFNuSIYavlYD12OQcnimMv6Zqrf3WUikfredpXiY8UNAfxazQPpaCzNFq
 DcjNKt6DcdXXSHthQiRhMbWLPl+Lw8dih8Y+cs/xRnjqySHl8eLLb0tFL7Dlkl0z
 7yTLyt+A5UN8AKqYZTvGfsofa4RdaIoBq+CG5unQwzulpU5ndOpaUJcc9QhNV+rN
 EtxvFEfiq9mDefg1kb2JW/W2ew22sr8fzhRJHnoIXGBJ2RtV+hc=
 =N5Us
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210503' into staging

Aspeed patches :

* Fixes for the DMA space
* New model for ASPEED's Hash and Crypto Engine (Joel and Klaus)
* Acceptance tests (Joel)
* A fix for the XDMA  model
* Some extra features for the SMC controller.
* Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick)

# gpg: Signature made Mon 03 May 2021 06:23:36 BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20210503:
  aspeed: Add support for the quanta-q7l1-bmc board
  hw/block: m25p80: Add support for mt25ql02g and mt25qu02g
  aspeed: Add support for the rainier-bmc board
  aspeed: Deprecate the swift-bmc machine
  tests/qtest: Rename m25p80 test in aspeed_smc test
  aspeed/smc: Add extra controls to request DMA
  aspeed/smc: Add a 'features' attribute to the object class
  hw/misc/aspeed_xdma: Add AST2600 support
  tests/acceptance: Test ast2600 machine
  tests/acceptance: Test ast2400 and ast2500 machines
  tests/qtest: Add test for Aspeed HACE
  aspeed: Integrate HACE
  hw: Model ASPEED's Hash and Crypto Engine
  hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use alias
  aspeed/i2c: Rename DMA address space
  aspeed/i2c: Fix DMA address mask
  aspeed/smc: Remove unused "sdram-base" property
  aspeed/smc: Use the RAM memory region for DMAs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-04 17:05:53 +01:00
Daniel Henrique Barboza
b7573092ab spapr.h: increase FDT_MAX_SIZE
Certain SMP topologies stress, e.g. 1 thread/core, 2048 cores and
1 socket, stress the current maximum size of the pSeries FDT:

Calling ibm,client-architecture-support...qemu-system-ppc64: error
creating device tree: (fdt_setprop(fdt, offset,
"ibm,processor-segment-sizes", segs, sizeof(segs))): FDT_ERR_NOSPACE

2048 is the default NR_CPUS value for the pSeries kernel. It's expected
that users will want QEMU to be able to handle this kind of
configuration.

Bumping FDT_MAX_SIZE to 2MB is enough for these setups to be created.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210408204049.221802-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Ravi Bangoria
a7913d5e3f ppc: Rename current DAWR macros and variables
Power10 is introducing second DAWR. Use real register names (with
suffix 0) from ISA for current macros and variables used by Qemu.

One exception to this is KVM_REG_PPC_DAWR[X]. This is from kernel
uapi header and thus not changed in kernel as well as Qemu.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210412114433.129702-3-ravi.bangoria@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Vaibhav Jain
53d7d7e2b1 ppc/spapr: Add support for implement support for H_SCM_HEALTH
Add support for H_SCM_HEALTH hcall described at [1] for spapr
nvdimms. This enables guest to detect the 'unarmed' status of a
specific spapr nvdimm identified by its DRC and if its unarmed, mark
the region backed by the nvdimm as read-only.

The patch adds h_scm_health() to handle the H_SCM_HEALTH hcall which
returns two 64-bit bitmaps (health bitmap, health bitmap mask) derived
from 'struct nvdimm->unarmed' member.

Linux kernel side changes to enable handling of 'unarmed' nvdimms for
ppc64 are proposed at [2].

References:
[1] "Hypercall Op-codes (hcalls)"
    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst#n220
[2] "powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe"
    https://lore.kernel.org/linux-nvdimm/20210329113103.476760-1-vaibhav@linux.ibm.com/

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-Id: <20210402102128.213943-1-vaibhav@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
BALATON Zoltan
dcdf98a901 hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulation of it
that models the device enough to boot guests on this board. The
mv643xx.h header with register definitions is taken from Linux 4.15.10
only fixing white space errors, removing not needed parts and changing
formatting for QEMU coding style.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <79545ebd03bfe0665b73d2d7cbc74fdf3d62629e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
BALATON Zoltan
f9f0c9e2fa vt82c686: Add emulation of VT8231 south bridge
Add emulation of VT8231 south bridge ISA part based on the similar
VT82C686B but implemented in a separate subclass that holds the
differences while reusing parts that can be shared.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <10abc9f89854e7c980b9731c33d25a2e307e9c4f.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
BALATON Zoltan
2e84e107a0 vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it
To allow reusing ISA bridge emulation for vt8231_isa move the device
state of vt82c686b_isa emulation in an abstract via_isa class. This
change breaks migration back compatibility but this is not an issue
for Fuloong2E machine which is not versioned or migration supported.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <0cb8fc69c7aaa555589181931b881335fecd2ef3.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
BALATON Zoltan
f028c2ded2 vt82c686: QOM-ify superio related functionality
Collect superio functionality and its controlling config registers
handling in an abstract VIA_SUPERIO class that is a subclass of
ISA_SUPERIO and put vt82c686b specific parts in a subclass of this
abstract class.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <fbcc8cc8baf83f327612a1ef1c14bcbcdb0e7edb.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04 11:41:25 +10:00
Thomas Huth
e06054368c hw: Remove superfluous includes of hw/hw.h
The include/hw/hw.h header only has a prototype for hw_error(),
so it does not make sense to include this in files that do not
use this function.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210326151848.2217216-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Keqian Zhu
ac701a4f98 vmstate: Constify some VMStateDescriptions
Constify vmstate_ecc_state and vmstate_x86_cpu.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210408140706.23412-1-zhukeqian1@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02 17:24:50 +02:00
Philippe Mathieu-Daudé
db647703ba exec: Remove accel/tcg/ from include paths
When TCG is enabled, the accel/tcg/ include path is added to the
project global include search list. This accel/tcg/ directory
contains a header named "internal.h" which, while intented to
be internal to accel/tcg/, is accessible by all files compiled
when TCG is enabled. This might lead to problem with other
directories using the same "internal.h" header name:

  $ git ls-files | fgrep /internal.h
  accel/tcg/internal.h
  include/hw/ide/internal.h
  target/hexagon/internal.h
  target/mips/internal.h
  target/ppc/internal.h
  target/s390x/internal.h

As we don't need to expose accel/tcg/ internals to the rest of
the code base, simplify by removing it from the include search
list, and include the accel/tcg/ public headers relative to the
project root search path (which is already in the generic include
search path).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210413081008.3409459-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-01 11:44:13 -07:00
Cédric Le Goater
1769a70e54 aspeed/smc: Add extra controls to request DMA
The AST2600 SPI controllers have a set of bits to request/grant DMA
access. Add a new SMC feature for these controllers and use it to
check access to the DMA registers.

Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210407171637.777743-16-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:52 +02:00
Cédric Le Goater
1c5ee69da5 aspeed/smc: Add a 'features' attribute to the object class
It will simplify extensions of the SMC model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210407171637.777743-15-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:52 +02:00
Cédric Le Goater
8efbee28f4 hw/misc/aspeed_xdma: Add AST2600 support
When we introduced support for the AST2600 SoC, the XDMA controller
was forgotten. It went unnoticed because it's not used under emulation.
But the register layout being different, the reset procedure is bogus
and this breaks kexec.

Add a AspeedXDMAClass to take into account the register differences.

Cc: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Message-Id: <20210407171637.777743-14-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:52 +02:00
Joel Stanley
a3888d757a aspeed: Integrate HACE
Add the hash and crypto engine model to the Aspeed socs.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210409000253.1475587-3-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
Joel Stanley
c5475b3f9a hw: Model ASPEED's Hash and Crypto Engine
The HACE (Hash and Crypto Engine) is a device that offloads MD5, SHA1,
SHA2, RSA and other cryptographic algorithms.

This initial model implements a subset of the device's functionality;
currently only MD5/SHA hashing, and on the ast2600's scatter gather
engine.

Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
[ clg: - fixes for 32-bit and OSX builds ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210409000253.1475587-2-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
Philippe Mathieu-Daudé
e9c568dbc2 hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use alias
The flash mmio region is exposed as an AddressSpace.
AddressSpaces must not be sysbus-mapped, therefore map
the region using an alias.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[ clg : Fix DMA_FLASH_ADDR() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210312182851.1922972-3-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210407171637.777743-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
Cédric Le Goater
d177892d4a aspeed/smc: Remove unused "sdram-base" property
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407171637.777743-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01 10:03:51 +02:00
Peter Maydell
f38d1ea497 Block layer patches
- Fix permission update order problems with block graph changes
 - qemu-img convert: Unshare write permission for source
 - vhost-user-blk: Fail gracefully on too large queue size
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmCL26cRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9Zbsw//YyeNj+dNYX0IWZELgPGdGqDB/7HuApZP
 zUxzqqGjdoyUDsWqi2tfnPX9I2lhBi4NabeQwIDG911RDbX4gSD7hYl7ui6kMqBh
 M14x+vc02rCEyb2g0ReUms+uEOTbLcs44mavxBCFFooefFsY8xavGkcnV23jSipE
 5YUem0DBNq9LXQ8JWPN6HdJ1OPy+vrVyC9wM7r2Lg/+gQHeUD7DOzJq+wQScuu1H
 uS8O1fhx9oaI6Mn+KWdjRJ13/SMYnvqFYqNGASD/02HwoygfxOiCX7yWeXuHZWQr
 7EzRlKtVe4oj03VNWQKpbGVWYvWgkbTqAM8zAys9dJ9vRmnjPVlZCU5oV3+BGvXc
 NHhlqlXNVYpcfKFZXt+N8H2PXkKK5xPrJapkhH3cm+io7b0x5P0OmNpbuPXsEx3D
 S1gm02VDAwP+RnzDpYDrJK6G56glQPTd/k3msUyFD57AaH8bnCgpaJmQwWmxSYMc
 +zo5n2roBvYYtc+fWgT4HqdGsGrCJeKEGRYGilfb6ZjJ5Crn2hxwLRnry9z23ldo
 So4kQXEPHfIOp5yUSADUIgiQN0msE5ZaXLMdUM2Y3AzXEkGglm5/R2OjxYLuE/YY
 +ujOfQsNXScgLEOlLl/NsTZIl62w/youYx5REkhwD2SmpI79bN2Yg+C4HMPQn4ys
 mXDeU81BlKI=
 =xZIY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Fix permission update order problems with block graph changes
- qemu-img convert: Unshare write permission for source
- vhost-user-blk: Fail gracefully on too large queue size

# gpg: Signature made Fri 30 Apr 2021 11:27:51 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (39 commits)
  vhost-user-blk: Fail gracefully on too large queue size
  qemu-img convert: Unshare write permission for source
  block: Add BDRV_O_NO_SHARE for blk_new_open()
  block: refactor bdrv_node_check_perm()
  block: rename bdrv_replace_child_safe() to bdrv_replace_child()
  block: refactor bdrv_child_set_perm_safe() transaction action
  block: inline bdrv_replace_child()
  block: inline bdrv_check_perm_common()
  block: drop unused permission update functions
  block: bdrv_reopen_multiple: refresh permissions on updated graph
  block: bdrv_reopen_multiple(): move bdrv_flush to separate pre-prepare
  block: add bdrv_set_backing_noperm() transaction action
  block: make bdrv_refresh_limits() to be a transaction action
  block: make bdrv_unset_inherits_from to be a transaction action
  block: drop ignore_children for permission update functions
  block/backup-top: drop .active
  block: introduce bdrv_drop_filter()
  block: add bdrv_remove_filter_or_cow transaction action
  block: adapt bdrv_append() for inserting filters
  block: split out bdrv_replace_node_noperm()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-30 13:46:42 +01:00
Kevin Wolf
35b7f4abd5 block: Add BDRV_O_NO_SHARE for blk_new_open()
Normally, blk_new_open() just shares all permissions. This was fine
originally when permissions only protected against uses in the same
process because no other part of the code would actually get to access
the block nodes opened with blk_new_open(). However, since we use it for
file locking now, unsharing permissions becomes desirable.

Add a new BDRV_O_NO_SHARE flag that is used in blk_new_open() to unshare
any permissions that can be unshared.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210422164344.283389-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:48 +02:00
Vladimir Sementsov-Ogievskiy
ecb776bd93 block: refactor bdrv_child_set_perm_safe() transaction action
Old interfaces dropped, nobody directly calls
bdrv_child_set_perm_abort() and bdrv_child_set_perm_commit(), so we can
use personal state structure for the action and stop exploiting
BdrvChild structure. Also, drop "_safe" suffix which is redundant now.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-35-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:48 +02:00
Vladimir Sementsov-Ogievskiy
72373e40fb block: bdrv_reopen_multiple: refresh permissions on updated graph
Move bdrv_reopen_multiple to new paradigm of permission update:
first update graph relations, then do refresh the permissions.

We have to modify reopen process in file-posix driver: with new scheme
we don't have prepared permissions in raw_reopen_prepare(), so we
should reconfigure fd in raw_check_perm(). Still this seems more native
and simple anyway.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-31-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:48 +02:00
Vladimir Sementsov-Ogievskiy
1e4c797c75 block: make bdrv_refresh_limits() to be a transaction action
To be used in further commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-28-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:48 +02:00
Vladimir Sementsov-Ogievskiy
3108a15cf0 block: introduce bdrv_drop_filter()
Using bdrv_replace_node() for removing filter is not good enough: it
keeps child reference of the filter, which may conflict with original
top node during permission update.

Instead let's create new interface, which will do all graph
modifications first and then update permissions.

Let's modify bdrv_replace_node_common(), allowing it additionally drop
backing chain child link pointing to new node. This is quite
appropriate for bdrv_drop_intermediate() and makes possible to add
new bdrv_drop_filter() as a simple wrapper.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-24-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:48 +02:00
Vladimir Sementsov-Ogievskiy
8cad15b156 util: add transactions.c
Add simple transaction API to use in further update of block graph
operations.

Supposed usage is:

- "prepare" is main function of the action and it should make the main
  effect of the action to be visible for the following actions, keeping
  possibility of roll-back, saving necessary things in action state,
  which is prepended to the action list (to do that, prepare func
  should call tran_add()). So, driver struct doesn't include "prepare"
  field, as it is supposed to be called directly.

- commit/rollback is supposed to be called for the list of action
  states, to commit/rollback all the actions in reverse order

- When possible "commit" should not make visible effect for other
  actions, which make possible transparent logical interaction between
  actions.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-9-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:47 +02:00
Vladimir Sementsov-Ogievskiy
53e96d1e9f block: make bdrv_reopen_{prepare,commit,abort} private
These functions are called only from bdrv_reopen_multiple() in block.c.
No reason to publish them.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-8-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:47 +02:00
Vladimir Sementsov-Ogievskiy
228ca37e12 block: drop ctx argument from bdrv_root_attach_child
Passing parent aio context is redundant, as child_class and parent
opaque pointer are enough to retrieve it. Drop the argument and use new
bdrv_child_get_parent_aio_context() interface.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:47 +02:00
Vladimir Sementsov-Ogievskiy
3ca1f32257 block: BdrvChildClass: add .get_parent_aio_context handler
Add new handler to get aio context and implement it in all child
classes. Add corresponding public interface to be used soon.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:47 +02:00
Peter Maydell
a6091108aa hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows
Currently the gpex PCI controller implements no special behaviour for
guest accesses to areas of the PIO and MMIO where it has not mapped
any PCI devices, which means that for Arm you end up with a CPU
exception due to a data abort.

Most host OSes expect "like an x86 PC" behaviour, where bad accesses
like this return -1 for reads and ignore writes.  In the interests of
not being surprising, make host CPU accesses to these windows behave
as -1/discard where there's no mapped PCI device.

The old behaviour generally didn't cause any problems, because
almost always the guest OS will map the PCI devices and then only
access where it has mapped them. One corner case where you will see
this kind of access is if Linux attempts to probe legacy ISA
devices via a PIO window access. So far the only case where we've
seen this has been via the syzkaller fuzzer.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210325163315.27724-1-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1918917
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-30 11:16:52 +01:00
Cornelia Huck
da7e13c00b hw: add compat machines for 6.1
Add 6.1 machine types for arm/i440fx/q35/s390x/spapr.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-id: 20210331111900.118274-1-cohuck@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-30 11:16:51 +01:00
Jason Wang
bc38e31b4e net: check the existence of peer before trying to pad
There could be case that peer is NULL. This can happen when during
network device hot-add where net device needs to be added first. So
the patch check the existence of peer before trying to do the pad.

Fixes: 969e50b61a ("net: Pad short frames to minimum size before sending from SLiRP/TAP")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20210423031803.1479-1-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-23 11:11:28 +01:00
Peter Maydell
ec63ca2d35 include/qemu/osdep.h: Move system includes to top
Mostly osdep.h puts the system includes at the top of the file; but
there are a couple of exceptions where we include a system header
halfway through the file.  Move these up to the top with the rest
so that all the system headers we include are included before
we include os-win32.h or os-posix.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-4-peter.maydell@linaro.org
Message-id: 20210414184343.26235-1-peter.maydell@linaro.org
2021-04-17 18:44:30 +01:00
Paolo Bonzini
875df03b22 osdep: protect qemu/osdep.h with extern "C"
System headers may include templates if compiled with a C++ compiler,
which cause the compiler to complain if qemu/osdep.h is included
within a C++ source file's 'extern "C"' block.  Add
an 'extern "C"' block directly to qemu/osdep.h, so that
system headers can be kept out of it.

There is a stray declaration early in qemu/osdep.h, which needs
to be special cased.  Add a definition in qemu/compiler.h to
make it look nice.

config-host.h, CONFIG_TARGET, exec/poison.h and qemu/compiler.h
are included outside the 'extern "C"' block; that is not
an issue because they consist entirely of preprocessor directives.

This allows us to move the include of osdep.h in our two C++
source files outside the extern "C" block they were previously
using for it, which in turn means that they compile successfully
against newer versions of glib which insist that glib.h is
*not* inside an extern "C" block.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-3-peter.maydell@linaro.org
[PMM: Moved disas/arm-a64.cc osdep.h include out of its extern "C" block;
 explained in commit message why we're doing this]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-17 18:44:30 +01:00
Paolo Bonzini
af1bb59c07 osdep: include glib-compat.h before other QEMU headers
glib-compat.h is sort of like a system header, and it needs to include
system headers (glib.h) that may dislike being included under
'extern "C"'.  Move it right after all system headers and before
all other QEMU headers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416135543.20382-2-peter.maydell@linaro.org
[PMM: Added comment about why glib-compat.h is special]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-17 18:44:30 +01:00
Peter Maydell
dce628a97f ppc patch queue for 2021-04-21
Here's what I hope is the last ppc related pull request for qemu-6.0.
 
 The 2 patches here revert a behavioural change that after further
 discussion we concluded was a bad idea (adding a timeout for
 possibly-failed hot unplug requests).  Instead it implements a
 different approach to the original problem: we again let unplug
 requests the guest doesn't respond to remain pending indefinitely, but
 no longer allow those to block attempts to retry the same unplug
 again.
 
 The change is a bit more complex than I'd like for this late in the
 freeze.  Nonetheless, I think it's important to merge this for 6.0, so
 we don't allow a release which has the probably-a-bad-idea timeout
 behaviour.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAmBz2eYACgkQbDjKyiDZ
 s5L1bw//XYKENrHBOgP7TCU+q2895PpCn5jxarPMrpX1fee1mlu+ncskZtlMQr8b
 C8zaWiUO9V6ezknVvqTe/4Wx+DmahGyrHwJQ/Fqj6o7C+057jEumPqBTuQFrNwz+
 4noougivOn1bVR5+vwDqAvNvO2xe49RPVd3kchHUe6tYHEa/k2kwqHeSFLZtm52R
 MusDWOD8FTxfY5uIy2LH4i2/Qe4PMn7by9ZJuldDAegHP4qn+Ffv5fO3a+HlDpOC
 KLwIub/PkLl5dtP4lru+PDgIpYwzdzZBDT/wb+OCspb4/ujqufJixt9DglnWQjEW
 3MwNK8ZnaiyrC8v9mFHzmcIJaRFQE55cr8bviB1SupJYJKB5YKuWMKKA+5E3LUuV
 VEbGzdcjP8xv0F7GzARsj8tt5iH54UJYbWLVxNy33tIfLbBrdbOH28DRhnKNZ3Y8
 f8Tz4VOKrqFL2ybQXOmSpitf5/h0nUMFRt2jZdhZLhcQ09b49k9loxPGAQoqB3aW
 HuIF3JSWnyAfFRxQjTsjzBDlgGQlghUEKj0fAqIx6SBhWJq5fg+nJ5hM1BEZIKfa
 gsy/Whs458YcSS/ArPPJ3vWC/RU8JvAAQcgSQF4AAAu/3h4FVnPCJGE8d7Jdsqdr
 KK8Y4y1PsXg7Ar7L1qTGJNzM4PKaAh4m8Mm8LLp6sVr4bAOl654=
 =fIJT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210412' into staging

ppc patch queue for 2021-04-21

Here's what I hope is the last ppc related pull request for qemu-6.0.

The 2 patches here revert a behavioural change that after further
discussion we concluded was a bad idea (adding a timeout for
possibly-failed hot unplug requests).  Instead it implements a
different approach to the original problem: we again let unplug
requests the guest doesn't respond to remain pending indefinitely, but
no longer allow those to block attempts to retry the same unplug
again.

The change is a bit more complex than I'd like for this late in the
freeze.  Nonetheless, I think it's important to merge this for 6.0, so
we don't allow a release which has the probably-a-bad-idea timeout
behaviour.

# gpg: Signature made Mon 12 Apr 2021 06:25:58 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210412:
  spapr.c: always pulse guest IRQ in spapr_core_unplug_request()
  spapr: rollback 'unplug timeout' for CPU hotunplugs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-13 13:05:07 +01:00
Mark Cave-Ayland
ff4a1daba6 esp: fix setting of ESPState mig_version_id when launching QEMU with -S option
If QEMU is launched with the -S option then the ESPState mig_version_id property
is left unset due to the ordering of the VMState fields in the VMStateDescription
for sysbusespscsi and pciespscsi. If the VM is migrated and restored in this
stopped state, the version tests in the vmstate_esp VMStateDescription and
esp_post_load() become confused causing the migration to fail.

Fix the ordering problem by moving the setting of mig_version_id to a common
esp_pre_save() function which is invoked first by both sysbusespscsi and
pciespscsi rather than at the point where ESPState is itself serialised into the
migration stream.

Buglink: https://bugs.launchpad.net/qemu/+bug/1922611
Fixes: 0bd005be78 ("esp: add vmstate_esp version to embedded ESPState")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210407124842.32695-1-mark.cave-ayland@ilande.co.uk>
2021-04-12 22:31:24 +01:00
Richard Henderson
52c01ada86 exec: Fix overlap of PAGE_ANON and PAGE_TARGET_1
Unfortuately, the elements of PAGE_* were not in numerical
order and so PAGE_ANON was added to an "unused" bit.
As an arbitrary choice, move PAGE_TARGET_{1,2} together.

Cc: Laurent Vivier <laurent@vivier.eu>
Fixes: 26bab757d4 ("linux-user: Introduce PAGE_ANON")
Buglink: https://bugs.launchpad.net/bugs/1922617
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12 11:06:24 +01:00
Daniel Henrique Barboza
d522cb52e6 spapr: rollback 'unplug timeout' for CPU hotunplugs
The pseries machines introduced the concept of 'unplug timeout' for CPU
hotunplugs. The idea was to circunvent a deficiency in the pSeries
specification (PAPR), that currently does not define a proper way for
the hotunplug to fail. If the guest refuses to release the CPU (see [1]
for an example) there is no way for QEMU to detect the failure.

Further discussions about how to send a QAPI event to inform about the
hotunplug timeout [2] exposed problems that weren't predicted back when
the idea was developed. Other QEMU machines don't have any type of
hotunplug timeout mechanism for any device, e.g. ACPI based machines
have a way to make hotunplug errors visible to the hypervisor. This
would make this timeout mechanism exclusive to pSeries, which is not
ideal.

The real problem is that a QAPI event that reports hotunplug timeouts
puts the management layer (namely Libvirt) in a weird spot. We're not
telling that the hotunplug failed, because we can't be 100% sure of
that, and yet we're resetting the unplug state back, preventing any
DEVICE_DEL events to reach out in case the guest decides to release the
device. Libvirt would need to inspect the guest itself to see if the
device was released or not, otherwise the internal domain states will be
inconsistent.  Moreover, Libvirt already has an 'unplug timeout'
concept, and a QEMU side timeout would need to be juggled together with
the existing Libvirt timeout.

All this considered, this solution ended up creating more trouble than
it solved. This patch reverts the 3 commits that introduced the timeout
mechanism for CPU hotplugs in pSeries machines.

This reverts commit 4515a5f786
"qemu_timer.c: add timer_deadline_ms() helper"

This reverts commit d1c2e3ce3d
"spapr_drc.c: add hotunplug timeout for CPUs"

This reverts commit 51254ffb32
"spapr_drc.c: introduce unplug_timeout_timer"

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1911414
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg04682.html

CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210401000437.131140-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-04-12 12:27:14 +10:00
Peter Maydell
ce69aa92d7 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJgbs4gAAoJEO8Ells5jWIRvgAIAJjpj9ptxEfEAisTeU7IMNPk
 vFyf9aBj/QBPv8VmcC90Mz/x38bMn0zE6V9E53camA7s1YtLxWj5ZG9wvj0ExJB9
 jgk4kEm5gpj8LY7/GwECNffaITQtLZgE4HVP98dVG9o1+5iCkZf8RnXAQH2ckzTs
 WoYuM0Glgj0XXdBauvpEkidQ+q23cOw7ipxNseI5wxZBAZt0RGdXoO6Dh+S219ro
 kFoDwzZS9tnuwpzzZJefQJuRWkUm1LsZ6rwC7Yd+gpk2Yt+fLGihF4dc0se2+SE1
 jeq7fV1E62PvEs2GJx4hs3rqakcBDE4Bf83sZnbFKMVpuvFUh+mXcKaIfXABDi8=
 =3d/N
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Thu 08 Apr 2021 10:34:24 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tap-win32: correctly recycle buffers
  Revert "qapi: net: Add query-netdev command"
  Revert "tests: Add tests for query-netdev command"
  Revert "net: Move NetClientState.info_str to dynamic allocations"
  Revert "hmp: Use QAPI NetdevInfo in hmp_info_network"
  Revert "net: Do not fill legacy info_str for backends"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-08 16:45:31 +01:00
Peter Maydell
d8724020dd V2 migration+virtiofs fixes pull 2021-04-07
A seg fix in virtiofsd, a bunch of fixes for background snapshots, and
 a migration test fix.
 
 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
 
 v2
   Fix for !linux build
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmBt8YkACgkQBRYzHrxb
 /efHNBAAismdo7L9iU8hUpvIuFbdLzREoYH3vqbZT6K1zjbmabpqbmMkcPQvj9Oo
 St9uSdq+6oOMrMi3r0oDpkb2F2csbIdPLQ7a2Y3hZTbzsUJXmI6eoYuSLUNRkvP1
 57MoUienK5TsATGFFPd3MuAvwHVOIBZGgg8aeYkC5RiltlQx42IQ4SEtc7yXSrnp
 TbjS45kd5I13crH4RxNG4X2/cG8McVYCSzEUMPBqbvNFiw2dJTOWr2kzza0jh4tP
 0VsgjeqPIoYa4n7LZEs7BgSiXcFcOPbUXvZ/ho7wHOLckhKlbdhJgklBUOom5aqO
 RZcN1XyPdzcKoxpch3T5d0h/YdEXEQSS7zdLBJDx4bUfb1ZhjEq0RhXqdYJ9YFEG
 dZTtxaxzW4u8UhPom4Eu0/HNyaqvjyqGrTxCpnS5fHH6pJKtdVhH7WfdEyYHj4lp
 PkEoKuTPZClk7Fjdsc329vHtIv0+rrWxBWtzFmrPgj13Xy8CkOOmKlYO2BhwI5zb
 j76s+y3IGNas4pJqhksNBE8AaODZ2IB8hq5dnqb9EsX4gtbOwhXYlA6aZY0EokiS
 VPbQ76emdE79A/vjArBkfiHsDzUkNe+sBSmreHBxzij/mmaXMP4mcVGew5dNfCFm
 TQrG9C1oH445yopZIXukcOOZofS3met90m6bbZO0DfAX+wXAAQM=
 =FKJ4
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210407b' into staging

V2 migration+virtiofs fixes pull 2021-04-07

A seg fix in virtiofsd, a bunch of fixes for background snapshots, and
a migration test fix.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

v2
  Fix for !linux build

# gpg: Signature made Wed 07 Apr 2021 18:53:13 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20210407b:
  tests/migration: fix parameter of auto-converge migration
  migration: Rename 'bs' to 'block' in background snapshot code
  migration: Pre-fault memory before starting background snasphot
  migration: Inhibit virtio-balloon for the duration of background snapshot
  migration: Fix missing qemu_fflush() on buffer file in bg_migration_thread
  virtiofsd: Fix security.capability comparison

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-08 14:00:57 +01:00
Jason Wang
f9bb0c1f98 Revert "qapi: net: Add query-netdev command"
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
d32ad10a14.

Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08 17:33:59 +08:00
Jason Wang
56e6f594bf Revert "net: Move NetClientState.info_str to dynamic allocations"
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
commit 59b5437eb7.

Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08 17:33:59 +08:00
Jason Wang
603f2f7c6c Revert "hmp: Use QAPI NetdevInfo in hmp_info_network"
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
a0724776c5.

Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-04-08 17:33:59 +08:00
Klaus Jensen
e548935634 hw/block/nvme: fix handling of private namespaces
Prior to this patch, if a private nvme-ns device (that is, a namespace
that is not linked to a subsystem) is wired up to an nvme-subsys linked
nvme controller device, the device fails to verify that the namespace id
is unique within the subsystem. NVM Express v1.4b, Section 6.1.6 ("NSID
and Namespace Usage") states that because the device supports Namespace
Management, "NSIDs *shall* be unique within the NVM subsystem".

Additionally, prior to this patch, private namespaces are not known to
the subsystem and the namespace is considered exclusive to the
controller with which it is initially wired up to. However, this is not
the definition of a private namespace; per Section 1.6.33 ("private
namespace"), a private namespace is just a namespace that does not
support multipath I/O or namespace sharing, which means "that it is only
able to be attached to one controller at a time".

Fix this by always allocating namespaces in the subsystem (if one is
linked to the controller), regardless of the shared/private status of
the namespace. Whether or not the namespace is shareable is controlled
by a new `shared` nvme-ns parameter.

Finally, this fix allows the nvme-ns `subsys` parameter to be removed,
since the `shared` parameter now serves the purpose of attaching the
namespace to all controllers in the subsystem upon device realization.
It is invalid to have an nvme-ns namespace device with a linked
subsystem without the parent nvme controller device also being linked to
one and since the nvme-ns devices will unconditionally be "attached" (in
QEMU terms that is) to an nvme controller device through an NvmeBus, the
nvme-ns namespace device can always get a reference to the subsystem of
the controller it is explicitly (using 'bus=' parameter) or implicitly
attaching to.

Fixes: e570768566 ("hw/block/nvme: support for shared namespace in subsystem")
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2021-04-07 10:48:31 +02:00
Andrey Gruzdev
1a8e44a89f migration: Inhibit virtio-balloon for the duration of background snapshot
The same thing as for incoming postcopy - we cannot deal with concurrent
RAM discards when using background snapshot feature in outgoing migration.

Fixes: 8518278a6a (migration: implementation
  of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-3-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-04-06 18:56:01 +01:00
Peter Maydell
4216ba1b22 target-arm queue:
* ppc/e500 and arm/virt: only add valid dynamic sysbus devices to the
    platform bus
  * update i.mx31 maintainer list
  * Revert "target/arm: Make number of counters in PMCR follow the CPU"
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmBsU1IZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3gsJD/48W/dgiW9NkVo0zZclQq7a
 kXBREK3JH+weW0Ws9g89hxjOmij6kPQeDC0fxCLfc7OX9bshYps21Q0r/Kl5X30h
 1T6eDTHhFPcv2cLty2IYUC4E2FWDjVuLtRtcx1dYULMrIG7xXEqDFl+d+ZgGK5mL
 NfwAA3fYqLN6cGxf94h/MosU0C9NJq1g/VDcq2gaR8+bdmGk0Gg7HHloFOzoOlaa
 KS+Qt9dcVYa6q9GZBtYi0/w1YlORSaf7sTvqjkZ4H5jTY9NfjVRP87OSaLkgJYt+
 OTTZjh9OQv1rL51Egl9sYUJX2dk4mFBE1pPampnwtBEcaQ9r8idR2+3noiTF8lRi
 tdyRPDoZU6EdkH0aLJeSRbkhT3z1y+m0qLTCRh5lnyhZKIAmDHXW2FBnFfPnL7EL
 C4RqkUZ1PxdixEQ6GOauBTJQbVsjKUTsgFuxZ2S3euKCl2oHnLafcqY9uC711YHb
 5R9cvACLHkA/kSgkw5HmJPyX4qNn+9LftRr3YpZ95soo/c8dEa17niu/2I2jMTnt
 1EPYap/R1lI3OHaB4Q51FlRPufnwQ9Vh/pOtXyn1cvc2x+ABHB++139LUuYe+5e2
 N/0vH5rSQcf9PnTPddOZYaCQx7KE44ZaAXHtqFMB+rWtG/Ss2MJCwCa9sMd6ciEE
 M9vZ4ZmccPBEwRv2Dgp84g==
 =f0Ad
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210406' into staging

target-arm queue:
 * ppc/e500 and arm/virt: only add valid dynamic sysbus devices to the
   platform bus
 * update i.mx31 maintainer list
 * Revert "target/arm: Make number of counters in PMCR follow the CPU"

# gpg: Signature made Tue 06 Apr 2021 13:25:54 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210406:
  Remove myself as i.mx31 maintainer
  Revert "target/arm: Make number of counters in PMCR follow the CPU"
  hw/ppc/e500plat: Only try to add valid dynamic sysbus devices to platform bus
  hw/arm/virt: Only try to add valid dynamic sysbus devices to platform bus
  machine: Provide a function to check the dynamic sysbus allowlist
  include/hw/boards.h: Document machine_class_allow_dynamic_sysbus_dev()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-06 16:04:33 +01:00