Now that SUB LOGICAL outputs borrow, we can use that as input directly.
It also means we can re-use CC_OP_SUBU and produce an output borrow
directly from SUB LOGICAL WITH BORROW.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-5-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The resulting cc is only dependent on the result and the carry-out.
Carry-out and borrow-out are inverses, so are trivially converted.
With tcg ops, it is easier to compute borrow-out than carry-out, so
save result and borrow-out rather than the inputs.
Borrow-out for 64-bit inputs is had via tcg_gen_sub2_i64 directly
into cc_src. Borrow-out for 32-bit inputs is had via extraction
from a normal 64-bit sub (with zero-extended inputs).
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-4-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that ADD LOGICAL outputs carry, we can use that as input directly.
It also means we can re-use CC_OP_ADDU and produce an output carry
directly from ADD LOGICAL WITH CARRY.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The resulting cc is only dependent on the result and the
carry-out. So save those things rather than the inputs.
Carry-out for 64-bit inputs is had via tcg_gen_add2_i64 directly
into cc_src. Carry-out for 32-bit inputs is had via extraction
from a normal 64-bit add (with zero-extended inputs).
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214221356.68039-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We need the CCW address on the libvirt side to correctly identify
the disk, so add this information to the GuestDiskAddress on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20201127082353.448251-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I push to gitlab anyway to get some CI coverage, so let's make
it my primary tree to avoid workflow duplication.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201214132628.56019-1-cohuck@redhat.com>
There's no VSIE support for a protected guest, so let's better not
advertise it and its support facilities.
Fixes: c3347ed0d2 ("s390x: protvirt: Support unpack facility")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201211105109.2913-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The functions to modify a QString's string are all unused now. Drop
them, and make the string immutable. Saves 16 bytes per QString on my
system.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-21-armbru@redhat.com>
QString supports modifying its string, but it's quite limited: you can
only append. Just one caller remains:
bdrv_parse_filename_strip_prefix() uses it just for building an
initial string.
Change it to do build the initial string with GString. This is
another step towards making QString immutable.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-20-armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
QString supports modifying its string, but it's quite limited: you can
only append. The remaining callers use it for building an initial
string, never for modifying it later.
Change keyval_parse_one() to do build the initial string with GString.
This is another step towards making QString immutable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-19-armbru@redhat.com>
QString supports modifying its string, but it's quite limited: you can
only append. The remaining callers use it for building an initial
string, never for modifying it later.
Change parse_string() to do build the initial string with GString.
This is another step towards making QString immutable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-18-armbru@redhat.com>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have two JSON writers written in C: qobject/qjson.c provides
qobject_to_json(), and migration/qjson.c provides a more low level
imperative interface. They don't share code. The latter tacitly
limits numbers to int64_t, and strings contents to characters that
don't need escaping.
Factor out qobject_to_json()'s JSON writer as qobject/json-writer.c.
Straightforward, except for numbers: since the writer is to be
independent of QObject, it can't use qnum_to_string(). Open-code it
instead. This is actually an improvement of sorts, because it
liberates qnum_to_string() from JSON's needs: its JSON-related FIXMEs
move to the JSON writer, where they belong.
The next commit will replace migration/qjson.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-16-armbru@redhat.com>
No users left outside tests/, and the ones in tests/ can just as well
use qstring_get_str(). Do that, and drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-14-armbru@redhat.com>
Commit aafb21a0b9 "qobject: let object_property_get_str() use new API"
isn't much of a simplification. Not worth having
object_property_get_str() differ from the other
object_property_get_FOO(). Revert.
This reverts commit aafb21a0b9.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-12-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
I'm about to remove qobject_get_try_str(). Use qstring_get_str()
instead. Safe because the argument is known to be a QString here.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-11-armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
RdmaProtectedQList provides a thread-safe queue of int64_t on top of a
QList.
rdma_protected_qlist_destroy() calls qlist_destroy_obj() directly.
qlist_destroy_obj() is actually for use by qobject_destroy() only.
The next commit will make that obvious.
The minimal fix would be calling qobject_unref() instead. But QList
is actually a bad fit here. It's designed for representing JSON
arrays. We're better off with a GQueue here. Replace.
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-8-armbru@redhat.com>
This reverts commit 164c374b75.
A free function for a reference-counted object is in bad taste.
Fortunately, this one is now also unused. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-7-armbru@redhat.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
QString supports modifying its string, but it's quite limited: you can
only append. The remaining callers use it for building an initial
string, never for modifying it later.
Use of GString for building the initial string is actually more
convenient here. Change qobject_to_json() & friends to do that.
Once all such uses are replaced this way, QString can become immutable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-5-armbru@redhat.com>
GString has a richer set of string operations than QString. It should
be preferred to QString except where we need a QObject or reference
counting. We don't here. Switch to GString, and put its richer
interface to use.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-3-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 48c043d0d1 "hmp: human-monitor-command: stop using the Memory
chardev driver" left us "if string is non-empty, duplicate it, else
duplicate the empty string". Meh. Duplicate it unconditionally.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-2-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
test_primitives() uses union member intmax_t max to compare the
integer members. Unspecified behavior. Has worked fine for many
years, though. Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-11-armbru@redhat.com>
The string output visitor should serialize numbers so that the string
input visitor deserializes them back to the same number. It fails to
do so.
print_type_number() uses format %f. This is prone to nasty rounding
errors. For instance, numbers between 0 and 0.0000005 get flushed to
zero.
We currently use this visitor only for HMP info migrate, info network,
info qtree, and info memdev. No double values occur there as far as I
can tell.
Fix anyway by formatting with %.17g. 17 decimal digits always suffice
for IEEE double.
See also recent commit "qobject: Fix qnum_to_string() to use
sufficient precision".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-9-armbru@redhat.com>
This demonstrates rounding error due to insufficient precision: double
3.1415926535897932 gets converted to JSON 3.141593.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-8-armbru@redhat.com>
We should serialize numbers to JSON so that they deserialize back to
the same number. We fail to do so.
The culprit is qnum_to_string(): it uses format %f with trailing '0'
trimmed. Results in pretty output for "nice" numbers, but is prone to
nasty rounding errors. For instance, numbers between 0 and 0.0000005
get flushed to zero.
Where exactly the incorrect rounding can bite is tiresome to gauge.
Here's my take.
* In QMP output, type 'number':
- query-blockstats value avg_rd_queue_depth
- QMP query-migrate values mbps, cache-miss-rate, encoding-rate,
busy-rate, compression-rate.
Relatively harmless, I guess.
* In tracing QMP input. Harmless.
* In qemu-ga output, type 'number': guest-get-users value login-time.
Harmless.
* In output of HMP qom-get. Harmless.
Not affected, because double values don't actually occur there (I
think):
* QMP output, type 'any':
* qom-get value
* qom-list, qom-list-properties value default-value
* query-cpu-model-comparison, query-cpu-model-baseline,
query-cpu-model-expansion value props.
* qemu-img --output json output.
* "json:" pseudo-filenames generated by bdrv_refresh_filename().
* The rbd block driver's "=keyvalue-pairs" hack.
* In -object help on property default values. Aside: use of JSON
feels inappropriate here.
* Output of HMP qom-get.
* Argument conversion to QemuOpts for qdev_device_add() and HMP with
qemu_opts_from_qdict()
QMP and HMP device_add, virtio-net failover primary creation,
xen-usb "usb-host" creation, HMP netdev_add, object_add.
* The uses of qobject_input_visitor_new_flat_confused()
As far as I can tell, none of the visited types contain double
values.
* Dumping ImageInfoSpecific with dump_qobject()
Fix by formatting with %.17g. 17 decimal digits always suffice for
IEEE double.
The change to expected test output illustrates the effect: the
rounding errors are gone, but some seemingly "nice" numbers now get
converted to not so nice strings, e.g. 0.42 to "0.41999999999999998".
This is because 0.42 is not representable exactly in double. It's
more accurate in this example than strictly necessary, though.
If ugly accuracy bothers us, we can we can try using the least number
of digits that still converts back to the same double. In this
example, "0.42" would do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-7-armbru@redhat.com>
qnum_to_string() has a FIXME comment about rounding errors due to
insufficient precision. Cover it: 2.718281828459045 gets converted to
"2.718282". The next commit will fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-6-armbru@redhat.com>
Move one of large_number()'s three checks to uint_number(), and the
other two to float_number().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-5-armbru@redhat.com>
simple_number() checks only qnum_get_try_int(). Also check
qnum_get_try_uint() and qnum_get_double().
float_number() checks only qnum_get_double(). Also check
qnum_get_try_int() and qnum_get_try_uint().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-3-armbru@redhat.com>
simple_number() and float_number() convert from JSON to QNumber and
back.
simple_number() tests "-0", but skips the conversion back to JSON,
because it yields "0", not "-0". Works as intended, so better cover
it: don't skip, but expect the funny result.
float_number() tests "-32.20e-10", but skips the conversion back to
JSON, because it yields "-0". This is a known bug in
qnum_to_string(), marked FIXME there. Cover the bug: don't skip, but
expect the funny result.
While there, switch from g_assert() to g_assert_cmpstr() & friends for
friendlier test failures.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201210161452.2813491-2-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of taking a list parameter and returning a new head at a
distance, just return the new item for the caller to insert into a
list via QAPI_LIST_PREPEND.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of modifying the value member of a list element passed as a
parameter, and open-coding the manipulation of that list, it's nicer
to just return a freshly allocated value to be prepended to a list
using QAPI_LIST_PREPEND.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In host_memory_backend_get_host_nodes, we build host_nodes
list and output it to v (a StringOutputVisitor) but forget
to free the list. This fixes the memory leak.
The memory leak stack:
Direct leak of 32 byte(s) in 2 object(s) allocated from:
#0 0xfffda30b3393 in __interceptor_calloc (/usr/lib64/libasan.so.4+0xd3393)
#1 0xfffda1d28b9b in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x58b9b)
#2 0xaaab05ca6e43 in host_memory_backend_get_host_nodes backends/hostmem.c:94
#3 0xaaab061ddf83 in object_property_get_uint16List qom/object.c:1478
#4 0xaaab05866513 in query_memdev hw/core/machine-qmp-cmds.c:312
#5 0xaaab061d980b in do_object_child_foreach qom/object.c:1001
#6 0xaaab0586779b in qmp_query_memdev hw/core/machine-qmp-cmds.c:328
#7 0xaaab0615ed3f in qmp_marshal_query_memdev qapi/qapi-commands-machine.c:327
#8 0xaaab0632d647 in do_qmp_dispatch qapi/qmp-dispatch.c:147
#9 0xaaab0632d647 in qmp_dispatch qapi/qmp-dispatch.c:190
#10 0xaaab0610f74b in monitor_qmp_dispatch monitor/qmp.c:120
#11 0xaaab0611074b in monitor_qmp_bh_dispatcher monitor/qmp.c:209
#12 0xaaab063caefb in aio_bh_poll util/async.c:117
#13 0xaaab063d30fb in aio_dispatch util/aio-posix.c:459
#14 0xaaab063cac8f in aio_ctx_dispatch util/async.c:268
#15 0xfffda1d22a6b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a6b)
#16 0xaaab063d0e97 in glib_pollfds_poll util/main-loop.c:218
#17 0xaaab063d0e97 in os_host_main_loop_wait util/main-loop.c:241
#18 0xaaab063d0e97 in main_loop_wait util/main-loop.c:517
#19 0xaaab05c8bfa7 in main_loop /root/rpmbuild/BUILD/qemu-4.1.0/vl.c:1791
#20 0xaaab05713bc3 in main /root/rpmbuild/BUILD/qemu-4.1.0/vl.c:4473
#21 0xfffda0a83ebf in __libc_start_main (/usr/lib64/libc.so.6+0x23ebf)
#22 0xaaab0571ed5f (aarch64-softmmu/qemu-system-aarch64+0x88ed5f)
SUMMARY: AddressSanitizer: 32 byte(s) leaked in 2 allocation(s).
Fixes: 4cf1b76bf1 (hostmem: add properties for NUMA memory policy)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Tested-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201210075226.20196-1-zhukeqian1@huawei.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're just doing pointer math with the device pointer, we can
simply use obj instead.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-32-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function will be moved to common QOM code, as it is not
specific to TYPE_DEVICE anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-31-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the variable declaration close to the macro that uses it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-29-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Support Property.set_default and PropertyInfo.description even if
PropertyInfo.create is set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-26-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Returning ObjectProperty* will be useful for new property
registration code that will add additional callbacks
to ObjectProperty after registering it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-25-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Every single qdev property setter function manually checks
dev->realized. We can just check dev->realized inside
qdev_property_set() instead.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-24-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We'll add extra code to the qdev property getters and setters, so
add wrapper functions where additional actions can be performed.
The new functions have a "field_prop_" prefix instead of "qdev_"
because the code will eventually be moved outside
qdev-properties.c, to common QOM code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-23-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make it easier to remove the Property.name field in the
future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-22-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make it easier to remove Property.name in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201211220529.2290218-21-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
