Do not allocate a large block for indexing. Instead, allocate
for each temporary as they are seen.
In general, this will use less memory, if we consider that most
TBs do not touch every target register. This also allows us to
allocate TempOptInfo for new temps created during optimization.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will hold a single constant for the duration of the TB.
They are hashed, so that each value has one temp across the TB.
Not used yet, this is all infrastructure.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This propagates the extended value of TCGTemp.val that we did before.
In addition, it will be required for vector constants.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix this name vs our coding style.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will reduce the differences between 32-bit and 64-bit hosts,
allowing full 64-bit constants to be created with the same interface.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In most, but not all, places that we check for TEMP_FIXED,
we are really testing that we do not modify the temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The temp_fixed, temp_global, temp_local bits are all related.
Combine them into a single enumeration.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we don't store more than tcg_target_long in TCGTemp,
we shouldn't be limited to that for code generation. We will
be able to use this for INDEX_op_dup2_vec with 2 constants.
Also pass along the minimal vece that may be said to apply
to the constant. This allows some simplification in the
various backends.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having dupi pass though movi is confusing and arguably wrong.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A connecting chardev object has an additional reference by the connecting
thread, so if the chardev is still connecting by the end of the test,
then the chardev object won't be freed. This in turn means that the yank
instance won't be unregistered and when running the next test-case
yank_register_instance will abort, because the yank instance is
already/still registered.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1445e97a5800e3f2ba024ad52b500a0315701632.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Migration and yank code assume that qio_channel_shutdown is thread
-safe and can be called from qmp oob handler. Document this after
checking the code.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <32b8c27e256da043f0f00db05bd7ab8fbc506070.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make qio_channel_tls_shutdown thread-safe by using atomics when
accessing tioc->shutdown.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <5bd8733f583f3558b32250fd0eb576b7aa756485.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Register yank functions on sockets to shut them down.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <484c6a14cc2506bebedd5a237259b91363ff8f88.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Register a yank function to shutdown the socket on yank.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1f4eeed1d066c6cbb8d05ffa9585f6e87b34aac6.1609167865.git.lukasstraub2@web.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Register a yank function which shuts down the socket and sets
s->state = NBD_CLIENT_QUIT. This is the same behaviour as if an
error occured.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <b73eb07db6d1fcd00667beb13ae6117260f002c3.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The yank feature allows to recover from hanging qemu by "yanking"
at various parts. Other qemu systems can register themselves and
multiple yank functions. Then all yank functions for selected
instances can be called by the 'yank' out-of-band qmp command.
Available instances can be queried by a 'query-yank' oob command.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <69934ceacfd33a7dfe53db145ecc630ad39ee47c.1609167865.git.lukasstraub2@web.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* arm: Support emulation of ARMv8.4-TTST extension
* arm: Update cpu.h ID register field definitions
* arm: Fix breakage of XScale instruction emulation
* hw/net/lan9118: Fix RX Status FIFO PEEK value
* npcm7xx: Add ADC and PWM emulation
* ui/cocoa: Make "open docs" help menu entry work again when binary
is run from the build tree
* ui/cocoa: Fix openFile: deprecation on Big Sur
* docs: Add qemu-storage-daemon(1) manpage to meson.build
-----BEGIN PGP SIGNATURE-----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=GPIT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210112-1' into staging
target-arm queue:
* arm: Support emulation of ARMv8.4-TTST extension
* arm: Update cpu.h ID register field definitions
* arm: Fix breakage of XScale instruction emulation
* hw/net/lan9118: Fix RX Status FIFO PEEK value
* npcm7xx: Add ADC and PWM emulation
* ui/cocoa: Make "open docs" help menu entry work again when binary
is run from the build tree
* ui/cocoa: Fix openFile: deprecation on Big Sur
* docs: Add qemu-storage-daemon(1) manpage to meson.build
# gpg: Signature made Tue 12 Jan 2021 21:22:15 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210112-1:
ui/cocoa: Fix openFile: deprecation on Big Sur
hw/*: Use type casting for SysBusDevice in NPCM7XX
hw/misc: Add QTest for NPCM7XX PWM Module
hw/misc: Add a PWM module for NPCM7XX
hw/adc: Add an ADC module for NPCM7XX
hw/timer: Refactor NPCM7XX Timer to use CLK clock
hw/misc: Add clock converter in NPCM7XX CLK module
hw/net/lan9118: Add symbolic constants for register offsets
hw/net/lan9118: Fix RX Status FIFO PEEK value
target/arm: Don't decode insns in the XScale/iWMMXt space as cp insns
docs: Add qemu-storage-daemon(1) manpage to meson.build
ui/cocoa: Update path to docs in build tree
target/arm: add aarch32 ID register fields to cpu.h
target/arm: add aarch64 ID register fields to cpu.h
target/arm: add descriptions of CLIDR_EL1, CCSIDR_EL1, CTR_EL0 to cpu.h
target/arm: make ARMCPU.ctr 64-bit
target/arm: make ARMCPU.clidr 64-bit
target/arm: fix typo in cpu.h ID_AA64PFR1 field name
target/arm: enable Small Translation tables in max CPU
target/arm: ARMv8.4-TTST extension
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A device shouldn't access its parent object which is QOM internal.
Instead it should use type cast for this purporse. This patch fixes this
issue for all NPCM7XX Devices.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We add a qtest for the PWM in the previous patch. It proves it works as
expected.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two
identical PWM modules. Each module contains 4 PWM entries. Each PWM has
two outputs: frequency and duty_cycle. Both are computed using inputs
from software side.
This module does not model detail pulse signals since it is expensive.
It also does not model interrupts and watchdogs that are dependant on
the detail models. The interfaces for these are left in the module so
that anyone in need for these functionalities can implement on their
own.
The user can read the duty cycle and frequency using qom-get command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-5-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.
Users can alter input value by using qom-set QMP command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch makes NPCM7XX Timer to use a the timer clock generated by the
CLK module instead of the magic number TIMER_REF_HZ.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-3-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows NPCM7XX CLK module to compute clocks that are used by
other NPCM7XX modules.
Add a new struct NPCM7xxClockConverterState which represents a
single converter. Each clock converter in CLK module represents one
converter in NPCM7XX CLK Module(PLL, SEL or Divider). Each converter
takes one or more input clocks and converts them into one output clock.
They form a clock hierarchy in the CLK module and are responsible for
outputing clocks for various other modules in an NPCM7XX SoC.
Each converter has a function pointer called "convert" which represents
the unique logic for that converter.
The clock contains two initialization information: ConverterInitInfo and
ConverterConnectionInfo. They represent the vertices and edges in the
clock diagram respectively.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The lan9118 code mostly uses symbolic constants for register offsets;
the exceptions are those which the datasheet doesn't give an official
symbolic name to.
Add some names for the registers which don't already have them, based
on the longer names they are given in the memory map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210108180401.2263-3-peter.maydell@linaro.org
In commit cd8be50e58 we converted the A32 coprocessor
insns to decodetree. This accidentally broke XScale/iWMMXt insns,
because it moved the handling of "cp insns which are handled
by looking up the cp register in the hashtable" from after the
call to the legacy disas_xscale_insn() decode to before it,
with the result that all XScale/iWMMXt insns now UNDEF.
Update valid_cp() so that it knows that on XScale cp 0 and 1
are not standard coprocessor instructions; this will cause
the decodetree trans_ functions to ignore them, so that
execution will correctly get through to the legacy decode again.
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
Use the dedicated X86Seg enum type for segment registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210109233427.749748-1-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make config.status generation a bit more robust. (The quote_sh
function will also be reused to parse configure's command line
arguments in an external script driven by Meson build option
introspection).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cocoa UI code currently assumes it is always the active UI
and does not interact well with other UI frontend code. Move
the relevant checks to Meson now that all other frontends
have become Meson options. This way, SDL/GTK+/Cocoa can be
parsed entirely by scripts/configure-parse-buildoptions.pl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also allows removing CONFIG_NEED_X11, all the ingredients
can be computed easily in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now move the logic verbatim. GTK+ actually has a hard requirement
on X11 if gtk+x11 is present, but we will sort that out later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_GTK_GL is defined if OpenGL is present and GTK+
is 3.16 or newer. Since GTK+ 3.22 is the minimum supported
version, just use CONFIG_OPENGL instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the automagic connection between --enable-cocoa
and enabling coreaudio in audio_drv_list. It can be
overridden anyway just by placing --enable-cocoa before
--audio-drv-list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add trace events for virtio command and response tracing.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116183114.55703-2-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This script first runs the regular gdb's 'bt' command, and then if we are in a
coroutine it prints the coroutines backtraces in the order in which they
were called.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217155436.927320-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code that dumps the stack frame works like that:
* save current registers
* overwrite current registers (including rip/rsp) with coroutine snapshot
in the jmpbuf
* print backtrace
* restore the saved registers.
If the user has currently selected a non topmost stack frame in gdb,
the above code will still restore the selected frame registers,
but the gdb will then lose the selected frame index, which makes it impossible
to switch back to frame 0, to continue debugging the executable.
Therefore switch temporarily to the topmost frame of the stack
for the above code.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217155436.927320-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This struct only used in whpx-apic.c, there is no need
expose it in whpx.h.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20210107101919.80-6-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107101919.80-4-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20210107101919.80-3-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently if we don't exit with $LastExitCode manually,
the cirrus would not report the build/testing failure.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107101919.80-2-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only leave the external interface in sysemu/whpx.h. whpx_apic_in_platform
is moved to a .c file because it needs whpx_state.
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201219090637.1700900-3-pbonzini@redhat.com>
Rename the file in preparation for moving more implementation-internal
definitions to it. The build is still broken though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201219090637.1700900-2-pbonzini@redhat.com>
