In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-io provides a 'reopen' command that allows switching from writable
to read-only access. We need to make sure that we don't try to keep
write permissions to a BlockBackend that becomes read-only, otherwise
things are going to fail.
This requires a bdrv_drain() call because otherwise in-flight AIO
write requests could issue new internal requests while the permission
has already gone away, which would cause assertion failures. Draining
the queue doesn't break AIO requests in any new way, bdrv_reopen() would
drain it anyway only a few lines later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Remove the unnecessary home-grown redefinition of the assert() macro here,
and remove the unusable debug code at the end of the checkpoint() function.
The code there uses assert() with side-effects (assignment to the "mapping"
variable), which should be avoided. Looking more closely, it seems as it is
apparently also only usable for one certain directory layout (with a file
named USB.H in it) and thus is of no use for the rest of the world.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RestartData is the opaque data of the throttle_group_restart_queue_entry
coroutine. By being stack allocated, it isn't available anymore if
aio_co_enter schedules the coroutine with a bottom half and runs after
throttle_group_restart_queue returns.
Cc: qemu-stable@nongnu.org
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bkt->max == 0 and bkt->burst_length > 1 then we could have a
division by 0 in throttle_do_compute_wait(). That configuration is
however not permitted and is already detected by throttle_is_valid(),
but let's assert it in throttle_compute_wait() to make it explicit.
Found by Coverity (CID: 1381016).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x.
Using virtio-scsi will implicitly pick the right device, so just
switch to that for simplicity.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x, so use the -ccw instead of the -pci versions of virtio
devices on s390x.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cpu model on s390x does not provide zPCI, which is
not yet wired up on tcg. Moreover, virtio-ccw is the standard
on s390x, so use the -ccw instead of the -pci versions of virtio
devices on s390x.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block driver documentation is available in qemu-doc.html. It would be
convenient to have documentation for formats, protocols, and filter
drivers in a man page.
Extract the relevant part of qemu-doc.html into a new file called
docs/qemu-block-drivers.texi. This file can also be built as a
stand-alone document (man, html, etc).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
People get surprised when, after "qemu-img create -f raw /dev/sdX", they
still see qcow2 with "qemu-img info", if previously the bdev had a qcow2
header. While this is natural because raw doesn't need to write any
magic bytes during creation, hdev_create is free to clear out the first
sector to make sure the stale qcow2 header doesn't cause such confusion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's not too surprising when a user specifies the backing file relative
to the current working directory instead of the top layer image. This
causes error when they differ. Though the error message has enough
information to infer the fact about the misunderstanding, it is better
if we document this explicitly, so that users don't have to learn from
mistakes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A basic set of qemu options is initialised in ./common:
export QEMU_OPTIONS="-nodefaults -machine accel=qtest"
However, two test cases (172 and 186) overwrite QEMU_OPTIONS and neglect
to manually set '-machine accel=qtest'. Add the missing option for 172.
186 probably only copied the code from 172, it doesn't actually need to
overwrite QEMU_OPTIONS, so remove that in 186.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Add a firmware path config option to configure. Multiple directories
are accepted, with the usual colon as separator. Default value is
${prefix}/share/qemu-firmware. The path is searched in addition to the
current search path (typically ${prefix}/share/qemu).
This prepares qemu for the planned split of the prebuilt firmware blobs
into a separate project.
Distributions can also use this to get rid of the firmware symlink farm
and add -- for example -- /usr/share/seabios to the firmware path
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-3-kraxel@redhat.com
Add helper function to add a directory to the qemu search path, so we
don't duplicate the checks. Add a check for duplicate entries, so we
stop trying to open files twice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-2-kraxel@redhat.com
QEMU currently aborts if you try to use the device at the command
line:
$ ppc64-softmmu/qemu-system-ppc64 -S -machine prep -device pc87312
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222:
qemu-system-ppc64: -device pc87312: Device 'parallel0' is in use
Aborted (core dumped)
It uses parallel_hds in its realize function, so I can not be
instantiated by the user again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is required to be removed on SmartOS (Illumos).
As of now there are no alternative supported SunOS distributions.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If QEMU has been compiled with the flags --enable-tcg-interpreter and
--enable-debug, the guest is running incredibly slow. The pxe boot test
can take up to 400 seconds when testing the pseries ppc64 machine. While
we should still look for ways to speed up the test on the pseries machine,
it's better to increase the timeout in this test to 600 seconds anyway to
allow the test to pass successfully now with this unusal configuration
already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If 'bs' is a complex expression, we were only casting the front half
rather than the full expression. Luckily, none of the callers were
passing bad arguments, but it's better to be robust up front.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The virtio-gpu-pci device is already in the display category, so the
virtio-gpu-device should be there, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When using bit-wise operations that exploit the power-of-two
nature of the second argument of ROUND_UP(), we still need to
ensure that the mask is as wide as the first argument (done
by using a ternary to force proper arithmetic promotion).
Unpatched, ROUND_UP(2ULL*1024*1024*1024*1024, 512U) produces 0,
instead of the intended 2TiB, because negation of an unsigned
32-bit quantity followed by widening to 64-bits does not
sign-extend the mask.
Broken since its introduction in commit 292c8e50 (v1.5.0).
Callers that passed the same width type to both macro parameters,
or that had other code to ensure the first parameter's maximum
runtime value did not exceed the second parameter's width, are
unaffected, but I did not audit to see which (if any) existing
clients of the macro could trigger incorrect behavior (I found
the bug while adding a new use of the macro).
While preparing the patch, checkpatch complained about poor
spacing, so I also fixed that here and in the nearby DIV_ROUND_UP.
CC: qemu-trivial@nongnu.org
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of using the hardcoded (MemTxAttrs){0} for no memory attributes
let's use the already defined MEMTXATTRS_UNSPECIFIED macro instead.
This is technically a change of behaviour as MEMTXATTRS_UNSPECIFIED sets
the unspecified field to 1, but it doesn't look like anything is
checking this field.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The example obviously lacks the "-m" parameter.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Error process of baum_chr_open needs to set brlapi null, so it won't
get released twice in char_braille_finalize, which will cause
"/usr/bin/qemu-system-x86_64: double free or corruption (!prev)"
Signed-off-by: Liang Yan <lyan@suse.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove trailing whitespace in qemu-options documentation, as it causes
reproducibility issues depending on the echo implementation used by
the Makefile.
Reported-By: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
It may be better to add a trace event to monitor the last moment of
a key event from QEMU to guest VM
Signed-off-by: Liang Yan <lyan@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This device is private and is created once per aux-bus.
So don't allow the user to create one from command-line.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In qemu-thread-posix.c we have two implementations of the
various qemu_sem_* functions, one of which uses native POSIX
sem_* and the other of which emulates them with pthread conditions.
This is necessary because not all our host OSes support
sem_timedwait().
Instead of a hard-coded list of OSes which don't implement
sem_timedwait(), which gets out of date, make configure
test for the presence of the function and set a new
CONFIG_HAVE_SEM_TIMEDWAIT appropriately.
In particular, newer NetBSDs have sem_timedwait(), so this
commit will switch them over to using it. OSX still does
not have an implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
moved in commit 7746cf8aab
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
moved in commit ac06724a71
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alistair Francis volunteered :)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This change fixes conflict with the DragonFly BSD headers.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
smartcard_cflags is no longer needed since commit
0b22ef0f57.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mmio path (see exec.c:prepare_mmio_access) already protects itself
against recursive locking and it makes sense to do the same for
io_readx/writex. Otherwise any helper running in the BQL context will
assert when it attempts to write to device memory as in the case of
the bug report.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CC: Richard Jones <rjones@redhat.com>
CC: Paolo Bonzini <bonzini@gnu.org>
CC: qemu-stable@nongnu.org
Message-Id: <20170921110625.9500-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's incorrect to return success rc >= 0 if we skip qio_channel_writev_all()
call due to s->quit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170920124507.18841-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we are woken up from while() loop in nbd_read_reply_entry
handles must be equal. If we are woken up from
nbd_recv_coroutines_wake_all s->quit must be true, so we do
not need checking handles equality.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170920124507.18841-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
