Notice that we can't still run tests with it disabled. Both cdrom-test and
drive_del-test use virtio-scsi without checking if it is enabled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AcpiSdtTable::header::signature is the only remained field from
AcpiTableHeader structure used by tests. Instead of using packed
structure to access signature, just read it directly from table
blob and remove no longer used AcpiSdtTable::header / union and
keep only AcpiSdtTable::aml byte array.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
some parts of sanitize_fadt_ptrs() do redundant job
- locating FADT
- checking original checksum
There is no need to do it as test_acpi_fadt_table() already does that,
so drop duplicate code and move remaining fixup code into
test_acpi_fadt_table().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
replace a bunch of ACPI_READ_ARRAY/ACPI_READ_FIELD macro, that read
SMBIOS table field by field with one memread() to fetch whole table
at once and drop no longer used ACPI_READ_ARRAY/ACPI_READ_FIELD macro.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move fetch_table() into acpi-utils.c renaming it to acpi_fetch_table()
and reuse it in vmgenid-test that reads RSDT and then tables it references,
to find and parse VMGNEID SSDT.
While at it wrap RSDT referenced tables enumeration into FOREACH macro
(similar to what we do with QLIST_FOREACH & co) to reuse it with bios and
vmgenid tests.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU used to exits with a not accurate error message when
an initrd > 2GiB was passed. That was fixed on patch:
commit f3839fda57
Author: Li Zhijian <lizhijian@cn.fujitsu.com>
Date: Thu Sep 13 18:07:13 2018 +0800
change get_image_size return type to int64_t
This change adds a regression test for that fix. It starts
QEMU with a 2GiB dummy initrd, and checks that it evaluates the
file size correctly and prints an accurate message.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181109182153.5390-1-wainersm@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "check" target is not a target that will run all other tests
listed, so in order to be accurate it's necessary to list those that
will run. The same is true for "check-clean".
Then, to give a better visual impression of the differences in the
various targets, let's add empty lines.
Finally, a small (and hopeful) grammar fix from a non-native speaker.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-5-crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current approach works fine, but it runs Python on every make
command (even if it's not related to the venv usage).
This is just an optimization, and not a change of behavior.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit a33fbb4f8b.
The functionality is unused.
Note: in addition to automatic revert, drop second parameter in
hbitmap_iter_next() call from hbitmap_next_dirty_area() too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This reverts commit 269576848e.
The functionality is unused. Drop tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Promote bitmap/NBD interfaces to stable for use in incremental
backups. Add 'qemu-nbd --bitmap'.
- John Snow: 0/11 bitmaps: remove x- prefix from QMP api
- Philippe Mathieu-Daudé: qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
- Eric Blake: 0/8 Promote x-nbd-server-add-bitmap to stable
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJcPLU5AAoJEKeha0olJ0Nqt4AH/2JXm2Ky9lth8QdVzPodh0cl
xeBteQ51LVjneAlQuT5u5LR6+0ujljVCDUPaUfAcxhWJagofzPVIdSe+kOnQEtgN
e7zf1pFxvLkITTl2iu0/HFxBz1pJb+ZayZqZ5zOHfj7LVSafwNC7MbW/t5yueiXl
fPbxZqF4+C7lN9woS4p6zgB5berQuWHdHxsLLbkxFigr9JRiH3t8qm1tsa0nd/AZ
uCyVAzqxFBkchh86uZ8TisUU7XqR+ab99/feOEkMWj2ctra7HfkJeCkPOZialzOS
5A4UBZSDzCwr10NtHBMQhvSmvBFghm4L3u9faejg81TTTpbIQtcUoXu+ClGIHVM=
=cYBw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-14' into staging
nbd patches for 2019-01-14
Promote bitmap/NBD interfaces to stable for use in incremental
backups. Add 'qemu-nbd --bitmap'.
- John Snow: 0/11 bitmaps: remove x- prefix from QMP api
- Philippe Mathieu-Daudé: qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
- Eric Blake: 0/8 Promote x-nbd-server-add-bitmap to stable
# gpg: Signature made Mon 14 Jan 2019 16:13:45 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-01-14:
qemu-nbd: Add --bitmap=NAME option
nbd: Merge nbd_export_bitmap into nbd_export_new
nbd: Remove x-nbd-server-add-bitmap
nbd: Allow bitmap export during QMP nbd-server-add
nbd: Merge nbd_export_set_name into nbd_export_new
nbd: Only require disabled bitmap for read-only exports
nbd: Forbid nbd-server-stop when server is not running
nbd: Add some error case testing to iotests 223
qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
iotests: add iotest 236 for testing bitmap merge
iotests: implement pretty-print for log and qmp_log
iotests: change qmp_log filters to expect QMP objects only
iotests: remove default filters from qmp_log
iotests: add qmp recursive sorting function
iotests: add filter_generated_node_ids
iotests.py: don't abort if IMGKEYSECRET is undefined
block: remove 'x' prefix from experimental bitmap APIs
blockdev: n-ary bitmap merge
block/dirty-bitmap: remove assertion from restore
blockdev: abort transactions in reverse order
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It allows to remove a bit more of code duplication and
reuse common utility to get ACPI tables from guest (modulo RSDP).
While at it, consolidate signature checking into fetch_table() instead
of open-codding it.
Considering FACS is special and doesn't have checksum, make checksum
validation optin, the same goes for signature verification.
PS:
By pure accident, patch also fixes FACS not being tested against
reference table since it wasn't added to data::tables list.
But we managed not to regress it since reference file was added
by commit
(d25979380 acpi unit-test: add test files)
back in 2013
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RSDT referenced tables always have length at offset 4 and checksum at
offset 9, that's enough for reusing fetch_table() and replacing custom
RSDT fetching code with it.
While at it
* merge fetch_rsdt_referenced_tables() into test_acpi_rsdt_table()
* drop test_data::rsdt_table/rsdt_tables_addr/rsdt_tables_nr since
we need this data only for duration of test_acpi_rsdt_table() to
fetch other tables and use locals instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Whole FADT is fetched as part of RSDT referenced tables in
fetch_rsdt_referenced_tables() albeit a bit later than when FADT
is partially parsed in fadt_fetch_facs_and_dsdt_ptrs().
However there is no reason for calling fetch_rsdt_referenced_tables()
so late, just move it right after we fetched RSDT and before
fadt_fetch_facs_and_dsdt_ptrs(). That way we can reuse whole FADT
fetched by fetch_rsdt_referenced_tables() and avoid duplicate
custom fields fetching in fadt_fetch_facs_and_dsdt_ptrs().
While at it rename fadt_fetch_facs_and_dsdt_ptrs() to
test_acpi_fadt_table(). The follow up patch will merge
fadt_fetch_facs_and_dsdt_ptrs() into test_acpi_rsdt_table(),
so that we would end up calling only test_acpi_FOO_table()
for consistency for tables that require special processing.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently in the 1st case we store table body fetched from QEMU in
AcpiSdtTable::aml minus it's header but in the 2nd case when we
load reference aml from disk, it holds whole blob including header.
More over in the 1st case, we read header in separate AcpiSdtTable::header
structure and then jump over hoops to fixup tables and combine both.
Treat AcpiSdtTable::aml as whole table blob approach in both cases
and when fetching tables from QEMU, first get table length and then
fetch whole table into AcpiSdtTable::aml instead if doing it field
by field.
As result
* AcpiSdtTable::aml is used in consistent manner
* FADT fixups use offsets from spec instead of being shifted by
header length
* calculating checksums and dumping blobs becomes simpler
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently when processing VHOST_USER_SET_VRING_CALL
if 'qemu_chr_fe_get_msgfds' get no fd, the 'fd' will
be a stack uninitialized value.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's been marked as deprecated in QEMU v2.6.0 already, so really nobody
should use the legacy "ivshmem" device anymore (but use ivshmem-plain or
ivshmem-doorbell instead). Time to remove the deprecated device now.
Belatedly also update a mention of the deprecated "ivshmem" in the file
docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit
5400c02b90 ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Having to fire up qemu, then use QMP commands for nbd-server-start
and nbd-server-add, just to expose a persistent dirty bitmap, is
rather tedious. Make it possible to expose a dirty bitmap using
just qemu-nbd (of course, for now this only works when qemu-nbd is
visiting a BDS formatted as qcow2).
Of course, any good feature also needs unit testing, so expand
iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-9-eblake@redhat.com>
With the experimental x-nbd-server-add-bitmap command, there was
a window of time where an NBD client could see the export but not
the associated dirty bitmap, which can cause a client that planned
on using the dirty bitmap to be forced to treat the entire image
as dirty as a safety fallback. Furthermore, if the QMP client
successfully exports a disk but then fails to add the bitmap, it
has to take on the burden of removing the export. Since we don't
allow changing the exposed dirty bitmap (whether to a different
bitmap, or removing advertisement of the bitmap), it is nicer to
make the bitmap tied to the export at the time the export is
created, with automatic failure to export if the bitmap is not
available.
The experimental command included an optional 'bitmap-export-name'
field for remapping the name exposed over NBD to be different from
the bitmap name stored on disk. However, my libvirt demo code
for implementing differential backups on top of persistent bitmaps
did not need to take advantage of that feature (it is instead
possible to create a new temporary bitmap with the desired name,
use block-dirty-bitmap-merge to merge one or more persistent
bitmaps into the temporary, then associate the temporary with the
NBD export, if control is needed over the exported bitmap name).
Hence, I'm not copying that part of the experiment over to the
stable addition. For more details on the libvirt demo, see
https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html,
https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat
This patch focuses on the user interface, and reduces (but does
not completely eliminate) the window where an NBD client can see
the export but not the dirty bitmap, with less work to clean up
after errors. Later patches will add further cleanups now that
this interface is declared stable via a single QMP command,
including removing the race window.
Update test 223 to use the new interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-6-eblake@redhat.com>
Our initial implementation of x-nbd-server-add-bitmap put
in a restriction because of incremental backups: in that
usage, we are exporting one qcow2 file (the temporary overlay
target of a blockdev-backup sync:none job) and a dirty bitmap
owned by a second qcow2 file (the source of the
blockdev-backup, which is the backing file of the temporary).
While both qcow2 files are still writable (the target in
order to capture copy-on-write of old contents, and the
source in order to track live guest writes in the meantime),
the NBD client expects to see constant data, including the
dirty bitmap. An enabled bitmap in the source would be
modified by guest writes, which is at odds with the NBD
export being a read-only constant view, hence the initial
code choice of enforcing a disabled bitmap (the intent is
that the exposed bitmap was disabled in the same transaction
that started the blockdev-backup job, although we don't want
to track enough state to actually enforce that).
However, consider the case of a bitmap contained in a read-only
node (including when the bitmap is found in a backing layer of
the active image). Because the node can't be modified, the
bitmap won't change due to writes, regardless of whether it is
still enabled. Forbidding the export unless the bitmap is
disabled is awkward, paritcularly since we can't change the
bitmap to be disabled (because the node is read-only).
Alternatively, consider the case of live storage migration,
where management directs the destination to create a writable
NBD server, then performs a drive-mirror from the source to
the target, prior to doing the rest of the live migration.
Since storage migration can be time-consuming, it may be wise
to let the destination include a dirty bitmap to track which
portions it has already received, where even if the migration
is interrupted and restarted, the source can query the
destination block status in order to potentially minimize
re-sending data that has not changed in the meantime on a
second attempt. Such code has not been written, and might not
be trivial (after all, a cluster being marked dirty in the
bitmap does not necessarily guarantee it has the desired
contents), but it makes sense that letting an active dirty
bitmap be exposed and changing alongside writes may prove
useful in the future.
Solve both issues by gating the restriction against a
disabled bitmap to only happen when the caller has requested
a read-only export, and where the BDS that owns the bitmap
(whether or not it is the BDS handed to nbd_export_new() or
from its backing chain) is still writable. We could drop
the check altogether (if management apps are prepared to
deal with a changing bitmap even on a read-only image), but
for now keeping a check for the read-only case still stands
a chance of preventing management errors.
Update iotest 223 to show the looser behavior by leaving
a bitmap enabled the whole run; note that we have to tear
down and re-export a node when handling an error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Since we already forbid other nbd-server commands when not
in the right state, it is unlikely that any caller was relying
on a second stop to behave as a silent no-op. Update iotest
223 to show the improved behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Testing success paths is important, but it's also nice to highlight
expected failure handling, to show that we don't crash, and so that
upcoming tests that change behavior can demonstrate the resulting
effects on error paths.
Add the following errors:
Attempting to export without a running server
Attempting to start a second server
Attempting to export a bad node name
Attempting to export a name that is already exported
Attempting to export an enabled bitmap
Attempting to remove an already removed export
Attempting to quit server a second time
All of these properly complain except for a second server-stop,
which will be fixed next.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
New interface, new smoke test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181221093529.23855-12-jsnow@redhat.com>
[eblake: fix last-minute change to echo text]
Signed-off-by: Eric Blake <eblake@redhat.com>
If iotests have lines exceeding >998 characters long, git doesn't
want to send it plaintext to the list. We can solve this by allowing
the iotests to use pretty printed QMP output that we can match against
instead.
As a bonus, it's much nicer for human eyes too.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-11-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As laid out in the previous commit's message:
```
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
```
Therefore:
Change qmp_log to treat filters as if they're always qmp object filters,
then change the logging call to rely on log()'s ability to serialize QMP
objects, so we're not duplicating that effort.
Add a qmp version of filter_testfiles and adjust the only caller using
it for qmp_log to use the qmp version.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20181221093529.23855-10-jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
To have qmp_log use log's serialization, qmp_log will need to
accept only qmp filters, not text filters.
However, only a single caller of qmp_log actually requires any
filters at all. I remove the default filter and add it explicitly
to the caller in preparation for refactoring qmp_log to use rich
filters instead.
test 206 is amended to name the filter explicitly and the default
is removed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-9-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Python before 3.6 does not sort dictionaries (including kwargs).
Therefore, printing QMP objects involves sorting the keys to have
a predictable ordering in the iotests output. This means that
iotests output will sometimes show arguments in an order not
specified by the test author.
Presently, we accomplish this by using json.dumps' sort_keys argument,
where we only serialize the arguments dictionary, but not the command.
However, if we want to pretty-print QMP objects being sent to the
QEMU process, we need to build the entire command before logging it.
Ordinarily, this would then involve "arguments" being sorted above
"execute", which would necessitate a rather ugly and harder-to-read
change to many iotests outputs.
To facilitate pretty-printing AND maintaining predictable output AND
having "arguments" sort after "execute", add a custom sort function
that takes a dictionary and recursively builds an OrderedDict that
maintains the specific key order we wish to see in iotests output.
The qmp_log function uses this to build a QMP object that keeps
"execute" above "arguments", but sorts all keys and keys in any
subdicts in "arguments" lexicographically to maintain consistent
iotests output, with no incompatible changes to any current test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-8-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To mimic the common filter of the same name, but for the python tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-7-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of using os.environ[], use .get with a default of empty string
to match the setup in check to allow us to import the iotests module
(for debugging, say) without needing a crafted environment just to
import the module.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-6-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'x' prefix was added because I was uncertain of the direction we'd
take for the libvirt API. With the general approach solidified, I feel
comfortable committing to this API for 4.0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Relying on sleep to always return having slept isn't safe as a signal
may have occurred. If signals are constantly incoming the program will
never reach its termination condition. This is believed to be the
mechanism causing time outs for qht-test in Travis.
The glib g_usleep() deals with all of this for us so lets use it instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Now we are using "named" snapshots of debian-sid we can rely on the
existing checksum mechanism for detecting changes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We are now using Xenial based images on Travis so we should make the
same one available as our qemu:travis docker image.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Debian Sid repository is not garanteed to be stable, as his
'unstable' name suggest :)
To allow quick testing, packages are pushed various time a day,
which my be annoying when trying to use it for stable development
(which is not recommended, but Sid provides edge packages we use
for testing).
Debian provides repositories snapshots which are suitable for our
use. Pick a recent date that works. When required, update to newer
releases will be easy.
This fixes current issues with this image:
$ make docker-image-debian-sid
[...]
The following packages have unmet dependencies:
build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed
git : Depends: perl but it is not going to be installed
Depends: liberror-perl but it is not going to be installed
pkg-config : Depends: libdpkg-perl but it is not going to be installed
texinfo : Depends: perl (>= 5.26.2-6) but it is not going to be installed
Depends: libtext-unidecode-perl but it is not going to be installed
Depends: libxml-libxml-perl but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[AJB: also tweak FROM to a earlier snapshot]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This avoids potential problems with duplicates.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Using the "latest" tag is not a good idea because this changes what
release it points to every 6 months. Together with caching of docker
builds this can cause confusion where CI has cached & built with Fedora
N, while a developer tries to reproduce a CI problem with Fedora N + 1,
or vica-verca.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fedora 29 is the current newest release, so switch to using that
from the current Fedora 28.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The 'debian' dockerfile was deprecated in favour of versioned
dockerfiles in July 2017. That is enough time for developers to
be warned about the rename.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The docker file builds and installs software into /usr/local but does
not run ldconfig. As a result QEMU links to libvirglrenderer.so, but
then crashes in "make check" unable to find the library.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use a stable tag instead of some random commit from mainstream
development, to avoid unexpected build failures.
This fixes:
CC virglrenderer.lo
virglrenderer.c: In function 'virgl_has_gl_colorspace':
virglrenderer.c:208:11: error: implicit declaration of function 'virgl_has_egl_khr_gl_colorspace' [-Werror=implicit-function-declaration]
virgl_has_egl_khr_gl_colorspace(egl_info));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
virglrenderer.c:208:43: error: 'egl_info' undeclared (first use in this function)
virgl_has_egl_khr_gl_colorspace(egl_info));
^~~~~~~~
virglrenderer.c:208:43: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
As of this commit 'git virglrenderer-0.7.0' is the last stable tag.
(virglrenderer commit breaking: fb4f7577f7ef)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
-----BEGIN PGP SIGNATURE-----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=RksQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Work around test-qht-par + gprof issues
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
# gpg: Signature made Fri 11 Jan 2019 18:23:29 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
tests: Disable qht-bench parallel test when using gprof
configure: Let the TARGET_GPROF var use the regular 'y' for Yes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test is failing on the Travis CI [*] since some time now,
disable it until it get fixed.
[*] https://travis-ci.org/qemu/qemu/builds/474821674
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190103150951.17592-3-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gtester is deprecated by upstream glib (see for example the announcement
at https://blog.gtk.org/2018/07/11/news-from-glib-2-58/) and it does
not support tests that call g_test_skip in some glib stable releases.
glib suggests instead using Automake's TAP support, which gtest itself
supports since version 2.38 (QEMU's minimum requirement is 2.40).
We do not support Automake, but we can use Automake's code to beautify
the TAP output. I chose to use the Perl copy rather than the shell/awk
one, with some changes so that it can accept TAP through stdin, in order
to reuse Perl's TAP parsing package. This also avoids duplicating the
parser between tap-driver.pl and tap-merge.pl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543513531-1151-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes a test's main() function recognizes that the environment
does not support the test, and therefore exits. In this case, we
still should run g_test_run() so that a TAP harness will print the
test plan ("1..0") and the test will be marked as skipped.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543513531-1151-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are some "#ifdef CONFIG_VIRTIO_VGA" in the code here which
do not work as expected: CONFIG_VIRTIO_VGA is a Makefile switch,
but not a CPP macro, so the "guarded" code currently simply never
gets enabled.
So enable this code now unconditionally, with some runtime switches
for the architectures that have the VIRTIO_VGA device enabled by
default. Looking at the other if-statement in the main function here,
it also seems like this test was originally supposed to be running
on "mips" and "alpha", too, so enable it now for these architectures
in the Makefile, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1543492248-28356-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Debian Sid repository is not garanteed to be stable, as his
'unstable' name suggest :)
To allow quick testing, Debian maintainers might push packages
various time a day. Sometime package dependencies might break,
which is annoying when using this repository for stable development
(which is not recommended, but Sid provides edge packages we use
for testing).
Debian provides repositories snapshots which are suitable for our
use. Pick a recent date that works. When required, update to newer
releases will be easy.
This fixes current issues with this image:
$ make docker-image-debian-sid
[...]
The following packages have unmet dependencies:
build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed
git : Depends: perl but it is not going to be installed
Depends: liberror-perl but it is not going to be installed
pkg-config : Depends: libdpkg-perl but it is not going to be installed
texinfo : Depends: perl (>= 5.26.2-6) but it is not going to be installed
Depends: libtext-unidecode-perl but it is not going to be installed
Depends: libxml-libxml-perl but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181101183705.5422-1-philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=x1jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging
target-arm queue:
* Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel)
* hw/misc/tz-mpc: Fix value of BLK_MAX register
* target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
* nRF51 SoC: add timer, GPIO, RNG peripherals
* hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
* cpus.c: Fix race condition in cpu_stop_current()
* hw/arm: versal: Plug memory leaks
* Allow M profile boards to run even if -kernel not specified
* gdbstub: Add multiprocess extension support for use when the
board has multiple CPUs of different types (like the Xilinx Zynq boards)
* target/arm: Don't decode S bit in SVE brk[ab] merging insns
* target/arm: Convert ARM_TBFLAG_* to FIELDs
# gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits)
Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.
hw/misc/tz-mpc: Fix value of BLK_MAX register
target/arm: Emit barriers for A32/T32 load-acquire/store-release insns
arm: Add Clock peripheral stub to NRF51 SOC
tests/microbit-test: Add Tests for nRF51 Timer
arm: Instantiate NRF51 Timers
hw/timer/nrf51_timer: Add nRF51 Timer peripheral
tests/microbit-test: Add Tests for nRF51 GPIO
arm: Instantiate NRF51 general purpose I/O
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
arm: Instantiate NRF51 random number generator
hw/misc/nrf51_rng: Add NRF51 random number generator peripheral
arm: Add header to host common definition for nRF51 SOC peripherals
qtest: Add set_irq_in command to set IRQ/GPIO level
hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller
cpus.c: Fix race condition in cpu_stop_current()
MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/
hw/arm: versal: Plug memory leaks
Revert "armv7m: Guard against no -kernel argument"
arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During "[PATCH v2 05/10] qom/globals: generalize
object_property_set_globals()" review, Eduardo suggested to rework the
GlobalProperty handling, so that -global is limited to QDev only and
we avoid mixing the machine compats and the user-provided -global
properties (instead of generalizing -global to various object kinds,
like I proposed in v2).
"qdev: do not mix compat props with global props" patch decouples a
bit user-provided -global from machine compat properties. This allows
to get rid of "user_provided" and "errp" fields in following patches.
A new compat property "x-use-canonical-path-for-ramblock-id" is added
to hostmem for legacy canonical path names, set to true for -file and
-memfd with qemu < 4.0.
(this series was initially titled "[PATCH v2 00/10] hostmem: use
object "id" for memory region name with >= 3.1", but its focus is more
in refactoring the global and compatilibity properties handling now)
-----BEGIN PGP SIGNATURE-----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=mx+3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/machine-props-pull-request' into staging
Generalize machine compatibility properties
During "[PATCH v2 05/10] qom/globals: generalize
object_property_set_globals()" review, Eduardo suggested to rework the
GlobalProperty handling, so that -global is limited to QDev only and
we avoid mixing the machine compats and the user-provided -global
properties (instead of generalizing -global to various object kinds,
like I proposed in v2).
"qdev: do not mix compat props with global props" patch decouples a
bit user-provided -global from machine compat properties. This allows
to get rid of "user_provided" and "errp" fields in following patches.
A new compat property "x-use-canonical-path-for-ramblock-id" is added
to hostmem for legacy canonical path names, set to true for -file and
-memfd with qemu < 4.0.
(this series was initially titled "[PATCH v2 00/10] hostmem: use
object "id" for memory region name with >= 3.1", but its focus is more
in refactoring the global and compatilibity properties handling now)
# gpg: Signature made Mon 07 Jan 2019 12:22:43 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/machine-props-pull-request: (28 commits)
hostmem: use object id for memory region name with >= 4.0
arm: replace instance_post_init()
qdev-props: call object_apply_global_props()
qdev-props: remove errp from GlobalProperty
qdev-props: convert global_props to GPtrArray
qdev: all globals are now user-provided
qdev: make a separate helper function to apply compat properties
compat: remove remaining PC_COMPAT macros
include: remove compat.h
compat: replace PC_COMPAT_2_1 & HW_COMPAT_2_1 macros
compat: replace PC_COMPAT_2_2 & HW_COMPAT_2_2 macros
compat: replace PC_COMPAT_2_3 & HW_COMPAT_2_3 macros
compat: replace PC_COMPAT_2_4 & HW_COMPAT_2_4 macros
compat: replace PC_COMPAT_2_5 & HW_COMPAT_2_5 macros
compat: replace PC_COMPAT_2_6 & HW_COMPAT_2_6 macros
compat: replace PC_COMPAT_2_7 & HW_COMPAT_2_7 macros
compat: replace PC_COMPAT_2_8 & HW_COMPAT_2_8 macros
compat: replace PC_COMPAT_2_9 & HW_COMPAT_2_9 macros
compat: replace PC_COMPAT_2_10 & HW_COMPAT_2_10 macros
compat: replace PC_COMPAT_2_11 & HW_COMPAT_2_11 macros
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test suite for the nRF51 GPIO peripheral for now
only tests initial state. Additionally a set of
tests testing an implementation detail of the model
are included.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-8-stefanha@redhat.com
[PMM: fixed stray space at start of file]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds a new qtest command "set_irq_in" which allows
to set qemu gpio lines to a given level.
Based on https://lists.gnu.org/archive/html/qemu-devel/2012-12/msg02363.html
which never got merged.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-2-stefanha@redhat.com
Originally-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All globals are now either provided via -global or through -cpu
features (CPU features are implemented by registering globals).
If the global isn't being used, it should warn in either case.
We can thus consider that all global_props are "user-provided"
globals. No need to track this per-globals anymore.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Error and trace improvements in NBD code, such as less noise for
common disconnect scenarios.
- Vladimir Sementsov-Ogievskiy: 0/3 nbd-client: drop extra error noise
- Eric Blake: portions of 0/22 nbd: add qemu-nbd --list
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJcMLgeAAoJEKeha0olJ0NqzXgH/RVRrCtmz0dOrrAkoJUfFX3t
AcnOSb8nTWXTLGvGpU6x5l9yGL77VaN83j3z/4tXAraGA3sZsFx4cNNepT7P3zBB
GlyT/b/Aie4EQAJPjuZdIZBe5pR6seSLoMFoGiga2oS2ik/wx4Wxxn9Gf9ZHUwVO
muCtsJQypNrfbv7GY2Qf5NKyB2IQxt4ljSCqOmi0/T2//mQrdmRhcHbgTTDUA5HS
3Rpr9gPV0u6YzA9foCu+UqUpyhF3RBQY9sSMLS+Y9L6W72WgynrG7y0A637o4Q61
W+2UDDjuvyyCDR8DjD+LnWyGn4QuxIglfta2kFRcFGoPr1GqcmP4gDLeqqdJKFs=
=R1PV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-05' into staging
nbd patches for 2019-01-05
Error and trace improvements in NBD code, such as less noise for
common disconnect scenarios.
- Vladimir Sementsov-Ogievskiy: 0/3 nbd-client: drop extra error noise
- Eric Blake: portions of 0/22 nbd: add qemu-nbd --list
# gpg: Signature made Sat 05 Jan 2019 13:58:54 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-01-05:
nbd/client: Drop pointless buf variable
qemu-nbd: Fail earlier for -c/-d on non-linux
nbd/client: More consistent error messages
nbd: Document timeline of various features
qemu-nbd: Use program name in error messages
block/nbd-client: use traces instead of noisy error_report_err
nbd/client: Trace all server option error messages
nbd: publish _lookup functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This changes output from:
$ qemu-nbd nosuch
Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
to something more consistent with qemu-img and qemu:
$ qemu-nbd nosuch
qemu-nbd: Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
Update the lone affected test to match. (Hmm - is it sad that we don't
do much testing of expected failures?)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181215135324.152629-2-eblake@redhat.com>
Reduce extra noise of nbd-client, change 083 correspondingly.
In various commits (be41c100 in 2.10, f140e300 in 2.11, 78a33ab
in 2.12), we added spots where qemu as an NBD client would report
problems communicating with the server to stderr, because there
was no where else to send the error to. However, this is racy,
particularly since the most common source of these errors is when
either the client or the server abruptly hangs up, leaving one
coroutine to report the error only if it wins (or loses) the
race in attempting the read from the server before another
thread completes its cleanup of a protocol error that caused the
disconnect in the first place. The race is also apparent in the
fact that differences in the flush behavior of the server can
alter the frequency of encountering the race in the client (see
commit 6d39db96).
Rather than polluting stderr, it's better to just trace these
situations, for use by developers debugging a flaky connection,
particularly since the real error that either triggers the abrupt
disconnection in the first place, or that results from the EIO
when a request can't receive a reply, DOES make it back to the
user in the normal Error propagation channels.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181102151152.288399-4-vsementsov@virtuozzo.com>
[eblake: drop depedence on error hint, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Test R5900 three-operand MADDU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADDU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADD1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADD.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
VTD fixes
IR and split irqchip are now the default for Q35
ACPI refactoring
hotplug refactoring
new names for virtio devices
multiple pcie link width/speeds
PCI fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcG967AAoJECgfDbjSjVRpUlMH/1wy8WW7Br/4JxlWUPsfZTqZ
0Lg2n59wuFzRVS+gLotp6bUaJGR9xn9fKjI1wfD59oVrDTKyauuw82v0OityEs33
ZquFecuJvP6k5N40DkqA9YJjKSw7nUmLrsyrD0t2H43npikP2aD9f6yootrr3oVV
nPwBvyT9ykIBQc7IzsHDiLw3EPdIf+9IR7+l+PLptzV0zK43Jfwi/nzHIQq00UMz
eLM/ejQLIx4BZJnYGS0Cy6v3K7cS3k45LHDY0cGc0id2jHFN2vdQyHCF9I1ps72q
pSlhMaLEwvQSYyre6iFTG5uuvyIPWv3LOkaBEwMSA5B/HXuEb2RKHThYzS9dc68=
=OwW7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
VTD fixes
IR and split irqchip are now the default for Q35
ACPI refactoring
hotplug refactoring
new names for virtio devices
multiple pcie link width/speeds
PCI fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 20 Dec 2018 18:26:03 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (44 commits)
x86-iommu: turn on IR by default if proper
x86-iommu: switch intr_supported to OnOffAuto type
q35: set split kernel irqchip as default
pci: Adjust PCI config limit based on bus topology
spapr_pci: perform unplug via the hotplug handler
pci/shpc: perform unplug via the hotplug handler
pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridge
pci/pcie: perform unplug via the hotplug handler
pci/pcihp: perform unplug via the hotplug handler
pci/pcihp: overwrite hotplug handler recursively from the start
pci/pcihp: perform check for bus capability in pre_plug handler
s390x/pci: rename hotplug handler callbacks
pci/shpc: rename hotplug handler callbacks
pci/pcie: rename hotplug handler callbacks
hw/i386: Remove deprecated machines pc-0.10 and pc-0.11
hw: acpi: Remove AcpiRsdpDescriptor and fix tests
hw: acpi: Export and share the ARM RSDP build
hw: arm: Support both legacy and current RSDP build
hw: arm: Convert the RSDP build to the buid_append_foo() API
hw: arm: Carry RSDP specific data through AcpiRsdpData
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
They've been deprecated for two releases and nobody complained that they
are still required anymore, so it's time to remove these now.
And while we're at it, mark the other remaining old 0.x machine types
as deprecated (since they can not properly be used for live-migration
anyway).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
The only remaining AcpiRsdpDescriptor users are the ACPI utils for the
BIOS table tests.
We remove that dependency and can thus remove the structure itself.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181204172535.2799-1-armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
SMBIOS is just another firmware interface used by some QEMU models.
We will later introduce more firmware interfaces in this subdirectory.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "hw/smbios/smbios.h" include is not used, remove it.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many of the current virtio-*-pci device types actually represent
3 different types of devices:
* virtio 1.0 non-transitional devices
* virtio 1.0 transitional devices
* virtio 0.9 ("legacy device" in virtio 1.0 terminology)
That would be just an annoyance if it didn't break our device/bus
compatibility QMP interfaces. With these multi-purpose device
types, there's no way to tell management software that
transitional devices and legacy devices require a Conventional
PCI bus.
The multi-purpose device types would also prevent us from telling
management software what's the PCI vendor/device ID for them,
because their PCI IDs change at runtime depending on the bus
where they were plugged.
This patch adds separate device types for each of those virtio
device flavors:
- virtio-*-pci: the existing multi-purpose device types
- Configurable using `disable-legacy` and `disable-modern`
properties
- Legacy driver support is automatically enabled/disabled
depending on the bus where it is plugged
- Supports Conventional PCI and PCI Express buses
(but Conventional PCI is incompatible with
disable-legacy=off)
- Changes PCI vendor/device IDs at runtime
- virtio-*-pci-transitional: virtio-1.0 device supporting legacy drivers
- Supports Conventional PCI buses only, because
it has a PIO BAR
- virtio-*-pci-non-transitional: modern-only
- Supports both Conventional PCI and PCI Express buses
The existing TYPE_* macros for these types will point to an
abstract base type, so existing casts in the code will keep
working for all variants.
A simple test script (tests/acceptance/virtio_version.py) is
included, to check if the new device types are equivalent to
using the `disable-legacy` and `disable-modern` options.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Exit boot-serial-test loop if child dies
- Sanitize verbose output in biot-tables-test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=cz57
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-12-17' into staging
- Replace global_qtest in some tests
- Exit boot-serial-test loop if child dies
- Sanitize verbose output in biot-tables-test
# gpg: Signature made Mon 17 Dec 2018 16:08:07 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-12-17:
tests/bios-tables-test: Sanitize test verbose output
tests: acpi: remove not used ACPI_READ_GENERIC_ADDRESS macro
tests: Exit boot-serial-test loop if child dies
tests/pxe: Make test independent of global_qtest
tests/prom-env: Make test independent of global_qtest
tests/machine-none: Make test independent of global_qtest
tests/test-filter: Make tests independent of global_qtest
tests/boot-serial: Get rid of global_qtest variable
tests/pvpanic: Make the pvpanic test independent of global_qtest
tests/vmgenid: Make test independent of global_qtest
tests/acpi-utils: Drop dependence on global_qtest
ivshmem-test: Drop dependence on global_qtest
tests/libqos/pci: Make PCI access functions independent of global_qtest
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is interesting to know whether the shutdown cause was 'quit' or
'reset', especially when using "--no-reboot". In that case, a management
layer can now determine if the guest wanted a reboot or shutdown, and
can act accordingly.
Changes the output of the reason in the iotests from 'host-qmp' to
'host-qmp-quit'. This does not break compatibility because
the field was introduced in the same version.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-4-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This makes it possible to determine what the exact reason was for
a RESET or a SHUTDOWN. A management layer might need the specific reason
of those events to determine which cleanups or other actions it needs to do.
This patch also updates the iotests to the new expected output that includes
the reason.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-3-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix the extraneous extra blank lines in the test output when running with V=1.
Before:
TEST: tests/bios-tables-test... (pid=25678)
/i386/acpi/piix4:
Looking for expected file 'tests/acpi-test-data/pc/DSDT'
Using expected file 'tests/acpi-test-data/pc/DSDT'
Looking for expected file 'tests/acpi-test-data/pc/FACP'
Using expected file 'tests/acpi-test-data/pc/FACP'
Looking for expected file 'tests/acpi-test-data/pc/APIC'
Using expected file 'tests/acpi-test-data/pc/APIC'
Looking for expected file 'tests/acpi-test-data/pc/HPET'
Using expected file 'tests/acpi-test-data/pc/HPET'
OK
After:
TEST: tests/bios-tables-test... (pid=667)
/i386/acpi/piix4:
Looking for expected file 'tests/acpi-test-data/pc/DSDT'
Using expected file 'tests/acpi-test-data/pc/DSDT'
Looking for expected file 'tests/acpi-test-data/pc/FACP'
Using expected file 'tests/acpi-test-data/pc/FACP'
Looking for expected file 'tests/acpi-test-data/pc/APIC'
Using expected file 'tests/acpi-test-data/pc/APIC'
Looking for expected file 'tests/acpi-test-data/pc/HPET'
Using expected file 'tests/acpi-test-data/pc/HPET'
OK
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Fixed conflicts with additional "qts" parameter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There's no point in waiting 5 full minutes when there will be
no more output. Compute timeout based on elapsed wall clock
time instead of N * delays, as the delay is a minimum sleep time.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
[thuth: Replaced global_qtest with local qts variable]
Signed-off-by: Thomas Huth <thuth@redhat.com>
global_qtest is not really required here, since boot_sector_test()
is already independent from that global variable.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
global_qtest is only needed here for one readl(). Let's replace it
with qtest_readl() and we can remove the global_qtest variable here.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Apart from using qmp() in one spot, this test does not have any
dependencies to the global_qtest variable, so we can simply get
rid of it here by replacing the qmp() with qtest_qmp().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Apart from using qmp() in the qmp_discard_response() macro, these
tests do not have any dependencies to the global_qtest variable,
so we can simply get rid of it here by replacing the qmp() with
qtest_qmp() in the macro.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test does not use any of the functions that require global_qtest,
so we can simply get rid of this global variable here.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to get rid of global_qtest in the long run, thus do not
use the wrappers like inb() and outb() here anymore.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The biggest part has already been done in the previous patch, we now
only have to replace some few qmp() and readb() calls with the
corresponding qtest_*() functions to get there.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As a general rule, we prefer avoiding implicit global state
because it makes code harder to safely copy and paste without
thinking about the global state. Adjust the helper code to
use explicit state instead, and update all callers.
bios-tables-test no longer depends on global_qtest, now that it
passes explicit state through the testsuite data; an assert
proves this fact (although we will get rid of it later, once
global_qtest is gone).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
[thuth: adapted patch to current master branch]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Managing parallel connections to two different monitors via
the implicit global_qtest makes it hard to copy-and-paste code
to tests that are not aware of the implicit state. Since we
have already fixed qpci to avoid global_qtest, we can now
simplify by not using global_qtest anywhere in ivshmem-test.
We can assert that the conversion is correct by checking that
global_qtest remains NULL throughout the test (a later patch
that changes global_qtest to not be a public global variable
will drop the assertions).
Signed-off-by: Eric Blake <eblake@redhat.com>
[thuth: Dropped the changes to test_ivshmem_hotplug() - will be fixed later]
Signed-off-by: Thomas Huth <thuth@redhat.com>
QPCIBus already tracks QTestState, so use that state instead of an
implicit reliance on global_qtest.
Based on an earlier patch ("libqos: Use explicit QTestState for pci
operations") from Eric Blake.
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Return success from patch_reloc
- Preserve 32-bit values as zero-extended on x86_64
- Make bswap during memory ops as optional
- Cleanup xxhash
- Revert constant pooling for tcg/sparc/
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcFxchAAoJEGTfOOivfiFfBUcIALmEeTTRkDtY8rCX0Thegd6g
O9roAEHvSu2BS3Zd3EwA+mu5OxcL8WeZY2LYBodFlCCsl/yQ09Lv7QmxrGtX7WNx
VF96BftTxYFGVC3Xc6+Q16/dSYM4qcWLuDxAE9BAh47m9NvTjPq+9ntEJMlalIDh
My8ANyGByBZeUeBXJuNReJcsGP5eUmNyuaM+aOlMjcVJeFAtvFacwkKpJdLPDM53
feDEiKhRWCkZq1ll4yFtuVTc+dQeYfLnPk8bkJcv7UAJnYIveXZk/eJcs5/vYjCx
8aePb9PwjbYrgXJgbo8mgVhgLBmakObQa8lJvlc3IZfIMp8OK/6au3TDXDSQAts=
=4Kdn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20181216' into staging
- Remove retranslation remenents
- Return success from patch_reloc
- Preserve 32-bit values as zero-extended on x86_64
- Make bswap during memory ops as optional
- Cleanup xxhash
- Revert constant pooling for tcg/sparc/
# gpg: Signature made Mon 17 Dec 2018 03:25:21 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20181216: (33 commits)
xxhash: match output against the original xxhash32
include: move exec/tb-hash-xx.h to qemu/xxhash.h
exec: introduce qemu_xxhash{2,4,5,6,7}
qht-bench: document -p flag
tcg: Drop nargs from tcg_op_insert_{before,after}
tcg/mips: Improve the add2/sub2 command to use TCG_TARGET_REG_BITS
tcg: Add TCG_TARGET_HAS_MEMORY_BSWAP
tcg/optimize: Optimize bswap
tcg: Clean up generic bswap64
tcg: Clean up generic bswap32
tcg/i386: Add setup_guest_base_seg for FreeBSD
tcg/i386: Precompute all guest_base parameters
tcg/i386: Assume 32-bit values are zero-extended
tcg/i386: Implement INDEX_op_extr{lh}_i64_i32 for 32-bit guests
tcg/i386: Propagate is64 to tcg_out_qemu_ld_slow_path
tcg/i386: Propagate is64 to tcg_out_qemu_ld_direct
tcg/s390x: Return false on failure from patch_reloc
tcg/ppc: Return false on failure from patch_reloc
tcg/arm: Return false on failure from patch_reloc
tcg/aarch64: Return false on failure from patch_reloc
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These microbenchmarks will allow us to measure the performance impact of
FP emulation optimizations. Note that we can measure both directly the impact
on the softfloat functions (with "-t soft"), or the impact on an
emulated workload (call with "-t host" and run under qemu user-mode).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This gets rid of the muladd errors due to not raising the invalid flag.
- Before:
Errors found in f64_mulAdd, rounding near_even, tininess before rounding:
+000.0000000000000 +7FF.0000000000000 +7FF.FFFFFFFFFFFFF
=> +7FF.FFFFFFFFFFFFF ..... expected -7FF.FFFFFFFFFFFFF v....
[...]
- After:
In 6133248 tests, no errors found in f64_mulAdd, rounding near_even, tininess before rounding.
[...]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before moving them all to include/qemu/xxhash.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Which we forgot to do in bd224fce60 ("qht-bench: add -p flag
to precompute hash values", 2018-09-26).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
-----BEGIN PGP SIGNATURE-----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=XKq9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
block/mirror: add missing coroutine_fn annotations
iotests: make 235 work on s390 (and others)
block: Assert that flags are up-to-date in bdrv_reopen_prepare()
block: Remove assertions from update_flags_from_options()
block: Stop passing flags to bdrv_reopen_queue_child()
block: Remove flags parameter from bdrv_reopen_queue()
block: Clean up reopen_backing_file() in block/replication.c
qemu-io: Put flag changes in the options QDict in reopen_f()
block: Drop bdrv_reopen()
block: Use bdrv_reopen_set_read_only() in the mirror driver
block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
block: Use bdrv_reopen_set_read_only() in stream_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_commit()
block: Use bdrv_reopen_set_read_only() in commit_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
block: Add bdrv_reopen_set_read_only()
file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
file-posix: Switch to .bdrv_co_ioctl
file-posix: Remove paio_submit_co()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=bymN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2018-12-13-v2' into staging
QAPI patches for 2018-12-13
# gpg: Signature made Fri 14 Dec 2018 05:53:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2018-12-13-v2: (32 commits)
qapi: add conditions to REPLICATION type/commands on the schema
qapi: add more conditions to SPICE
qapi: add condition to variants documentation
qapi: add 'If:' condition to struct members documentation
qapi: add 'If:' condition to enum values documentation
qapi: Add #if conditions to generated code members
qapi: add 'if' to alternate members
qapi: add 'if' to union members
qapi: Add 'if' to implicit struct members
qapi: add a dictionary form for TYPE
qapi-events: add 'if' condition to implicit event enum
qapi: add 'if' to enum members
qapi: add a dictionary form with 'name' key for enum members
qapi: improve reporting of unknown or missing keys
qapi: factor out checking for keys
tests: print enum type members more like object type members
qapi: change enum visitor and gen_enum* to take QAPISchemaMember
qapi: Do not define enumeration value explicitly
qapi: break long lines at 'data' member
qapi: rename QAPISchemaEnumType.values to .members
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test-arm-mptimer setup creates a lot of test names using
g_strdup_printf() and never frees them. This is entirely
harmless since it's one-shot test code, but it clutters
up the output from clang's LeakSanitizer. Refactor to
use a helper function so we can free the memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-5-peter.maydell@linaro.org
"-machine pc" will not work all architectures. Lets fall back to the
default machine by not specifying it.
In addition we also need to specify -no-shutdown on s390 as qemu will
exit otherwise.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function takes four options (cache.direct, cache.no-flush,
read-only and auto-read-only) from a QemuOpts object and updates the
flags accordingly.
If any of those options is not set (because it was missing from the
original QDict or because it had an invalid value) then the function
aborts with a failed assertion:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
block.c:1126: update_flags_from_options: Assertion `qemu_opt_find(opts, BDRV_OPT_CACHE_DIRECT)' failed.
Aborted
This assertion is unnecessary, and it forces any caller of
bdrv_reopen() to pass all the aforementioned four options. This may
have made sense in order to remove ambiguity when bdrv_reopen() was
taking both flags and options, but that's not the case anymore.
It's also unnecessary if we want to validate the option values,
because bdrv_reopen_prepare() already takes care of that, as we can
see if we remove the assertions:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
Parameter 'read-only' expects 'on' or 'off'
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reopen_f() puts a block device in the reopen queue, some of the
new options are passed using a QDict, but others ("read-only" and the
cache options) are passed as flags.
This patch puts those flags in the QDict. This way the flags parameter
becomes redundant and we'll be able to get rid of it in a subsequent
patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use a common function to generate the "If:..." line.
While at it, get rid of the existing \n\n (no idea why it was
there). Use a line-break in member description, this seems to look
slightly better in the plaintext version.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Note that union discriminators may not have 'if' conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-14-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-15-marcandre.lureau@redhat.com>
[Patches squashed, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wherever a struct/union/alternate/command/event member with NAME: TYPE
form is accepted, desugar it to a NAME: { 'type': TYPE } form.
This will allow to add new member details, such as 'if' in the
following patch to introduce conditionals, or 'default' for default
values etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-13-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaMember gains .ifcond for enum members: inherited classes,
such as QAPISchemaObjectTypeMember, will thus have an ifcond member
after this (those different types will also use the .ifcond to store
the condition and generate conditional code in the following patches).
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Desugar the enum NAME form to { 'name': NAME }. This will allow to add
new enum members, such as 'if' in the following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-7-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-8-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Harmless accidental move backed out, long line wrapped, patches
squashed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Report the set of missing or unknown keys. And give a hint about the
accepted keys.
The error message for multiple meta type members (visible in
tests/qapi-schema/double-type.err) is not improved.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 93bda4dd46 changed the internal representation of enum type
members from str to QAPISchemaMember, but we still print only a
string. Has been good enough, as the name is the member's only
attribute of interest, but that's about to change. To prepare, print
them more like object type members.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This will allow to add and access more properties associated with enum
values/members, like the associated 'if' condition. We may want to
have a specialized type QAPISchemaEnumMember, for now this will do.
Modify gen_enum() and gen_enum_lookup() for the same reason.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's make sure that the range handling code can properly deal with
ranges that end at the biggest possible number.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-10-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Basically copy all int64 list tests but adapt them to work on uint64
instead. The values for very big/very small values have to be adapted.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-9-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now support virtual walks, so use that instead.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-8-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The input visitor has some problems right now, especially
- unsigned type "Range" is used to process signed ranges, resulting in
inconsistent behavior and ugly/magical code
- uint64_t are parsed like int64_t, so big uint64_t values are not
supported and error messages are misleading
- lists/ranges of int64_t are accepted although no list is parsed and
we should rather report an error
- lists/ranges are preparsed using int64_t, making it hard to
implement uint64_t values or uint64_t lists
- types that don't support lists don't bail out
- visiting beyond the end of a list is not handled properly
- we don't actually parse lists, we parse *sets*: members are sorted,
and duplicates eliminated
So let's rewrite it by getting rid of usage of the type "Range" and
properly supporting lists of int64_t and uint64_t (including ranges of
both types), fixing the above mentioned issues.
Lists of other types are not supported and will properly report an
error. Virtual walks are now supported.
Tests have to be fixed up:
- Two BUGs were hardcoded that are fixed now
- The string-input-visitor now actually returns a parsed list and not
an ordered set.
Please note that no users/callers have to be fixed up. Candidates using
visit_type_uint16List() and friends are:
- backends/hostmem.c:host_memory_backend_set_host_nodes()
-- Code can deal with duplicates/unsorted lists
- numa.c::query_memdev()
-- via object_property_get_uint16List(), the list will still be sorted
and without duplicates (via host_memory_backend_get_host_nodes())
- qapi-visit.c::visit_type_Memdev_members()
- qapi-visit.c::visit_type_NumaNodeOptions_members()
- qapi-visit.c::visit_type_RockerOfDpaGroup_members
- qapi-visit.c::visit_type_RxFilterInfo_members()
-- Not used with string-input-visitor.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-7-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Test that very big/small values are not accepted and that ranges with
only one element work. Also test that ranges are ascending and cannot
have more than 65536 elements.
Rename expect4 to expect5, as we will be moving that to a separate ulist
test after the rework.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-6-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The string-input-visitor happily accepts NaN and infinities when parsing
numbers (doubles). They shouldn't. Fix that.
Also, add two test cases, testing if "NaN" and "inf" is properly
rejected.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-4-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu_strtosz() & friends reject NaNs, but happily accept infinities.
They shouldn't. Fix that.
The fix makes use of qemu_strtod_finite(). To avoid ugly casts,
change the @end parameter of qemu_strtosz() & friends from char **
to const char **.
Also, add two test cases, testing that "inf" and "NaN" are properly
rejected. While at it, also fixup the function documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-3-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Straightforward test just to let the test-qmp-cmds be complete.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-6-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit ddee57e017.
Meanwhile, revert one line from fa198ad9bd to make sure
qtest_init_without_qmp_handshake() will only pass in one parameter.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-5-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Out-of-band command execution was introduced in commit cf869d5317.
Unfortunately, we ran into a regression, and had to turn it into an
experimental option for 2.12 (commit be933ffc23).
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The regression has since been fixed (commit 951702f39c "monitor: bind
dispatch bh to iohandler context"). A thorough re-review of OOB
commands led to a few more issues, which have also been addressed.
This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"),
and makes QMP monitors again offer capability "oob" whenever they can
provide it, i.e. when the monitor's character device is capable of
running in an I/O thread.
Some trivial touch-up in the test code is required to make sure qmp-test
won't break.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-4-peterx@redhat.com>
[Conflict with "monitor: check if chardev can switch gcontext for OOB"
resolved, commit message updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcD/usAAoJEPMMOL0/L748br0P/iLL5RjzHJ+vrBsphRNPZ0eM
1wvgWJwvo+4JicebsnTWDmElprgetu2+disXyxSJhBOllSb7lwmxKR2OyHlicu5x
RDSk3CTZZuI/CqN08MlEVZiCuCT1LZuJ8Y0RzXBAsJlT51ZpvwprbXO1oyMjjx2P
UhXFuYIa8Wk+8+zuFnYI4nKPo3o8ra8OrtI2AdIneQ8zWEMvJCWhHqrZHeyuHOzb
N5bYEXi3JSIT2qyHyZlFNmXjPCNuMxhrrBc1yjmo6KJgHkVUgvn61hdod4BzvLsd
DWAfdEamBgP4HuU2fUTVFAYXirK+A4tM+ROblJ/Z/V7RHifoulrdedQzrqdM7FA5
6f4SUo+SSjqY1CYnS+zXp5USu6/ciaYZv9jE7W0WKjXt5kCsy9rlT0V8Q4RlOQji
ZoT6LpcVj0qnfdPdYwdWgpqWbr8G5Y3Xm91a+XLSqzj+xfFJQ6h7fCnF1/Ngn0Ep
o3LOtiJCDSma4maFemV7qhWfuaa20vUwfbRKeOvnTirDUv6oXpsP19kScbH06DeD
Hs9aFgi7XmFWNypWHeZNqy00UwiZmb2GcpqL/vAVwkqdMTgttfBdh5P4srRwwM2D
OQROJaHaBya8mzDO7BldapQOGXRHu9UDCP9gkK+BGGu4Edu0U+eRL/08GoFRM1M4
ra2Dn/AQTIW6lk0N9He0
=+od8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging
Trivial patches (2018-12-11)
# gpg: Signature made Tue 11 Dec 2018 18:02:20 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-patches-pull-request: (30 commits)
Fixes i386 xchgq test
maint: Grammar fix to mailmap
MAINTAINERS: Update email address for Fam Zheng
cutils: Assert in-range base for string-to-integer conversions
util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
target: hax: fix errors in comment
MAINTAINERS: Use my work email to review Build and test automation patches
MAINTAINERS: Add a missing entry for the NVDIMM device
MAINTAINERS: Add a missing entry to the QMP section
MAINTAINERS: Add a missing entry to SPICE
MAINTAINERS: Add missing entries for the MPS2 machine
MAINTAINERS: Add missing entries for the Canon DIGIC machine
MAINTAINERS: Add missing entries to the vhost section
MAINTAINERS: Add missing entries to the PC Chipset section
MAINTAINERS: Add a missing entry for the sun4m machines
MAINTAINERS: Add a missing entry for the Old World machines
MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
MAINTAINERS: Add missing entries for the Jazz machine
MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
MAINTAINERS: Add a missing entry to the SPARC CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is only used by a test, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181204142023.15982-6-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead, it returns 1 if an error was detected, which is the case for:
/qdev/properties/dynamic/global/subprocess:
warning: global dynamic-prop-type-bad.prop3 has invalid class name
warning: global nohotplug-type.prop5=105 not used
warning: global nondevice-type.prop6 has invalid class name
Clarify the function return value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181204142023.15982-2-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As "xchg" reads and writes both operands, the "+m" is required to avoid
undefined behavior on -O2 compilation.
Signed-off-by: Fabrice Desclaux <fabrice.desclaux@cea.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <03506cf0-a204-f619-8ee4-4990a5e69af5@cea.fr>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This test tries to build a packet whose size is greater than INT_MAX
which tries to trigger integer overflow in qemu_net_queue_append_iov()
which may result OOB.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-6-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 20181204035347.6148-5-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows flexibility to be reused for all kinds of command line
used by other tests.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 20181204035347.6148-4-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test is broken without previous commit fixing dead-lock in mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After iov_discard_front(), the iov may be smaller than its initial
size. Fixes the heap-buffer-overflow spotted by ASAN:
==9036==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6060000001e0 at pc 0x7fe632eca3f0 bp 0x7ffddc4a05a0 sp 0x7ffddc49fd48
WRITE of size 32 at 0x6060000001e0 thread T0
#0 0x7fe632eca3ef (/lib64/libasan.so.5+0x773ef)
#1 0x7fe632ecad23 in __interceptor_recvmsg (/lib64/libasan.so.5+0x77d23)
#2 0x561e7491936b in vubr_backend_recv_cb /home/elmarco/src/qemu/tests/vhost-user-bridge.c:333
#3 0x561e74917711 in dispatcher_wait /home/elmarco/src/qemu/tests/vhost-user-bridge.c:160
#4 0x561e7491c3b5 in vubr_run /home/elmarco/src/qemu/tests/vhost-user-bridge.c:725
#5 0x561e7491c85c in main /home/elmarco/src/qemu/tests/vhost-user-bridge.c:806
#6 0x7fe631a6c412 in __libc_start_main (/lib64/libc.so.6+0x24412)
#7 0x561e7491667d in _start (/home/elmarco/src/qemu/build/tests/vhost-user-bridge+0x3967d)
0x6060000001e0 is located 0 bytes to the right of 64-byte region [0x6060000001a0,0x6060000001e0)
allocated by thread T0 here:
#0 0x7fe632f42848 in __interceptor_malloc (/lib64/libasan.so.5+0xef848)
#1 0x561e7493acd8 in virtqueue_alloc_element /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:1848
#2 0x561e7493c2a8 in vu_queue_pop /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:1954
#3 0x561e749189bf in vubr_backend_recv_cb /home/elmarco/src/qemu/tests/vhost-user-bridge.c:297
#4 0x561e74917711 in dispatcher_wait /home/elmarco/src/qemu/tests/vhost-user-bridge.c:160
#5 0x561e7491c3b5 in vubr_run /home/elmarco/src/qemu/tests/vhost-user-bridge.c:725
#6 0x561e7491c85c in main /home/elmarco/src/qemu/tests/vhost-user-bridge.c:806
#7 0x7fe631a6c412 in __libc_start_main (/lib64/libc.so.6+0x24412)
SUMMARY: AddressSanitizer: heap-buffer-overflow (/lib64/libasan.so.5+0x773ef)
Shadow bytes around the buggy address:
0x0c0c7fff7fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c0c7fff7ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c0c7fff8000: fa fa fa fa 00 00 00 00 00 00 05 fa fa fa fa fa
0x0c0c7fff8010: 00 00 00 00 00 00 00 00 fa fa fa fa fd fd fd fd
0x0c0c7fff8020: fd fd fd fd fa fa fa fa fd fd fd fd fd fd fd fd
=>0x0c0c7fff8030: fa fa fa fa 00 00 00 00 00 00 00 00[fa]fa fa fa
0x0c0c7fff8040: fd fd fd fd fd fd fd fd fa fa fa fa fd fd fd fd
0x0c0c7fff8050: fd fd fd fd fa fa fa fa fd fd fd fd fd fd fd fd
0x0c0c7fff8060: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c0c7fff8070: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c0c7fff8080: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181109173028.3372-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo BOnzini <pbonzini@redhat.com>
Check that block node activation and inactivation works with a block
graph that is built with individually created nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The previous patch fixed the inherits_from pointer after block-stream,
and this one does the same for block-commit.
When block-commit finishes and the 'top' node is not the topmost one
from the backing chain then all nodes above 'base' up to and including
'top' are removed from the chain.
The bdrv_drop_intermediate() call converts a chain like this one:
base <- intermediate <- top <- active
into this one:
base <- active
In a simple scenario each backing file from the first chain has the
inherits_from attribute pointing to its parent. This means that
reopening 'active' will recursively reopen all its children, whose
options can be changed in the process.
However after the 'block-commit' call base.inherits_from is NULL and
the chain is broken, so 'base' does not inherit from 'active' and will
not be reopened automatically:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive if=none,file=hd2.qcow2
{ 'execute': 'block-commit',
'arguments': {
'device': 'none0',
'top': 'hd1.qcow2' } }
{ 'execute': 'human-monitor-command',
'arguments': {
'command-line':
'qemu-io none0 "reopen -o backing.l2-cache-size=2M"' } }
{ "return": "Cannot change the option 'backing.l2-cache-size'\r\n"}
This patch updates base.inherits_from in this scenario, and adds a
test case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a BlockDriverState's child is opened (be it a backing file, the
protocol layer, or any other) inherits_from is set to point to the
parent node. Children opened separately and then attached to a parent
don't have this pointer set.
bdrv_reopen_queue_child() uses this to determine whether a node's
children must also be reopened inheriting the options from the parent
or not. If inherits_from points to the parent then the child is
reopened and its options can be changed, like in this example:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 hd1.qcow2 1M
$ $QEMU -drive if=none,node-name=hd0,file=hd0.qcow2,\
backing.driver=qcow2,backing.file.filename=hd1.qcow2
(qemu) qemu-io hd0 "reopen -o backing.l2-cache-size=2M"
If the child does not inherit from the parent then it does not get
reopened and its options cannot be changed:
$ $QEMU -drive if=none,node-name=hd1,file=hd1.qcow2
-drive if=none,node-name=hd0,file=hd0.qcow2,backing=hd1
(qemu) qemu-io hd0 "reopen -o backing.l2-cache-size=2M"
Cannot change the option 'backing.l2-cache-size'
If a disk image has a chain of backing files then all of them are also
connected through their inherits_from pointers (i.e. it's possible to
walk the chain in reverse order from base to top).
However this is broken if the intermediate nodes are removed using
e.g. block-stream because the inherits_from pointer from the base node
becomes NULL:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive if=none,file=hd2.qcow2
(qemu) qemu-io none0 "reopen -o backing.l2-cache-size=2M"
(qemu) block_stream none0 0 hd0.qcow2
(qemu) qemu-io none0 "reopen -o backing.l2-cache-size=2M"
Cannot change the option 'backing.l2-cache-size'
This patch updates the inherits_from pointer if the intermediate nodes
of a backing chain are removed using bdrv_set_backing_hd(), and adds a
test case for this scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
