Use Hz as unit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Using it now would incur converting the three x86_def_t vendor words
into a string for object_property_set_str(), then back to three words
in the "vendor" setter.
The built-in CPU definitions use numeric preprocessor defines to
initialize the three words in a charset-safe way, so do not change the
fields to char[12] just to use the setter.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add the property early in the initfn so that it can be used in helpers
such as mce_init().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Add an error_free(), spotted by Michael Roth]
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
A family field value of 0xf and extended family field value of 0xff is
the maximum representable unsigned family number.
All other CPUID property values are bounds-checked, so add a check here
for symmetry before we adopt it in a property setter.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Avoids an x86_env_get_cpu() call there, to work with QOM properties.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Don't assume zeroed cpuid_model[] fields.
This didn't break anything yet but QOM properties should be able to set
the value to something else without setting an intermediate zero string.
Reviewed-by: Eduardo Habhost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Use memset() instead of for loop, suggested by Igor]
Signed-off-by: Andreas Färber <afaerber@suse.de>
If a guest sets very short timeouts, and asks for a timer to be reloaded on
timeout, QEMU can go to 100%CPU utilisation and become unresponsive,
as it is spending all its time generating timeout interrupts. On real
hardware this doesn't matter, as the interrupts are just coalesced,
and the effect is to have the interrupt asserted all the time.
This patch is a band-aid, that prevents timeouts less than 10
microseconds from being set. 10 microseconds is a limit that was
determined empirically on a variety of machines as the shortest that
allowed QEMU to pick up a control-a c sequence to get at the monitor.
Reported-by: Anna Lyons <anna.lyons@nicta.com.au>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Specify the root to search from as argument. This avoids hardcoding
"/machine" in some places and makes it more flexible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sparc Debian 5.0.8 does not define __suseconds_t as long,
but FMT_timeval expects %ld.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
remove the extra pthread switch which might be there
from the package config check for gthreads.
Signed-off-by: Peter Portante <peter.portante@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-system-arm (and other system emulations) crashes with SDL when
the user switches consoles (Alt-Ctrl-F4).
We already check for NULL pointers in qemu_chr_fe_ioctl,
qemu_chr_be_can_write and other functions, so do this also
for s->chr_read in qemu_chr_be_write. This fixes the crash.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow the user to make Qemu use a different subdirectory name
inside $datadir and $sysconfdir, instead of "/qemu".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autoconf uses --datadir for the /usr/share directory, not the
program-specific subdirectory inside /usr/share. This changes configure
to match autoconf behavior.
Note that this will break compatibility with existing build scripts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As now that block handles only the prefix variable, the code can be much
simpler. This also removes the CONFIG_QEMU_PREFIX define as it is not
used by any C code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now only the qemu_*dir variables will become #defines. The other
directory names aren't used by the C code.
That means the following #defines won't be available in C code anymore:
- CONFIG_QEMU_BINDIR
- CONFIG_QEMU_LIBDIR
- CONFIG_QEMU_INCLUDEDIR
- CONFIG_QEMU_MANDIR
- CONFIG_QEMU_SYSCONFDIR
- CONFIG_QEMU_LIBEXECDIR
The following #defines are going to be kept because they are handled by
the qemu_* block on create_config:
- CONFIG_QEMU_CONFDIR
- CONFIG_QEMU_DATADIR
- CONFIG_QEMU_DOCDIR
This one will be kept because it is set directly by ./configure:
- CONFIG_QEMU_HELPERDIR
This patch keeps the 'prefix=*' (CONFIG_QEMU_PREFIX) pattern because
other variables may use $prefix on their config-host.mak definitions.
The remaining code will be simplified on a further patch.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no code using that variable according to 'git grep', so kill
it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of hardcoding the directory suffix, use the qemu-specific
directory variable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
$confdir is a confusing name, as it's not clear if it's "the system
config dir" or "the Qemus-specific directory inside the config dir".
$qemu_confdir makes it more clear.
The current C code that uses CONFIG_QEMU_CONFDIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_CONFDIR) for
both "confdir" and "qemu_confdir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autoconf concept of "datadir" is supposed to be "$prefix/share", not
"$prefix/share/PACKAGE", so using datadir for the Qemu-specific
directory is confusing.
The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_DATADIR) for
both "datadir" and "qemu_datadir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The generic *dir section will eventually go away and be replaced with
qemu_* section. By now, both sections will be kept, while the variables
get renamed on config-host.mak.
With this patch, a XXXdir variable will become a CONFIG_QEMU_XXXDIR
define, and a qemu_XXXdir variable will become CONFIG_QEMU_XXXDIR as
well (instead of becoming a CONFIG_QEMU_QEMU_XXXDIR define).
Changes v1 -> v2:
- Rebase on top of newer qemu.git changes, that changed
"tr '[:lower:]' '[:upper:]'" to "LC_ALL=C tr '[a-z]' '[A-Z]'".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There's no "confdir" variable on Autoconf, but it's good to make it
clear that it's a variable for the Qemu-specific subdirectory inside
$sysconfdir.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The autoconf "docdir" variable is used for the program-specific
subdirectory, but anyway it's better to make it clear that the variable
is used for the qemu-specific subdirectory path.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The variable is used for the qemu-specific directory and has a different
meaning of the autoconf "datadir" variable (that's used for the
$prefix/share directory, not for $prefix/share/PACKAGE).
This doesn't change behavior or interfaces, it's just an internal
variable rename.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move code from cpu_mb_init() to a QOM initfn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
[AF: Leave cpu_reset() call in cpu_mb_init()]
Move code from cpu_state_reset() to QOM mb_cpu_reset().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Embed CPUMBState as first member of QOM MicroBlazeCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
[AF: Updated cpu.c to include cpu-qom.h indirectly via cpu.h]
Embed CPUCRISState as first member of QOM CRISCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use PRIx64 to print 64 bit values to avoid truncation
on 32 bit hosts.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* kwolf/for-anthony: (38 commits)
qemu-iotests: Fix test 031 for qcow2 v3 support
qemu-iotests: Add -o and make v3 the default for qcow2
qcow2: Zero write support
qemu-iotests: Test backing file COW with zero clusters
qemu-iotests: add a simple test for write_zeroes
qcow2: Support for feature table header extension
qcow2: Support reading zero clusters
qcow2: Version 3 images
qcow2: Ignore reserved bits in check_refcounts
qcow2: Ignore reserved bits in refcount table entries
qcow2: Simplify count_cow_clusters
qcow2: Refactor qcow2_free_any_clusters
qcow2: Ignore reserved bits in L1/L2 entries
qcow2: Fail write_compressed when overwriting data
qcow2: Ignore reserved bits in count_contiguous_clusters()
qcow2: Ignore reserved bits in get_cluster_offset
qcow2: Save disk size in snapshot header
Specification for qcow2 version 3
qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at()
iotests: Resolve test failures caused by hostname
...
Fix BCD mask for date. The most visible effect of this patch is
Solaris 2.5.1 doesn't hang at boot if the day of month is >21.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* origin/master: (27 commits)
target-arm: Move reset handling to arm_cpu_reset
target-arm: Drop cpu_reset_model_id()
target-arm: Move cache ID register setup to cpu specific init fns
target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset
target-arm: Move feature register setup to per-CPU init fns
target-arm: Move iWMMXT wCID reset to cpu_state_reset
target-arm: Drop JTAG_ID documentation
target-arm: Move SCTLR reset value setup to per cpu init fns
target-arm: Move CTR setup to per cpu init fns
target-arm: Move MVFR* setup to per cpu init fns
target-arm: Move FPSID config to cpu init fns
target-arm: Move feature bit settings to CPU init fns
target-arm: Add QOM subclasses for each ARM cpu implementation
target-arm: remind to keep arm features in sync with linux-user/elfload.c
tci: GETPC() macro must return an uintptr_t
gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc
softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile
target-xtensa: add tests for LOOPNEZ and LOOPGTZ
target-xtensa: fix LOOPNEZ/LOOPGTZ translation
qtest: add m48t59 tests for Sparc
...
GHashTableIter was first introduced in glib 2.16.
This patch removes it in favor of older g_hash_table_find()
for better compatibility with RHEL5.
Signed-off-by: NODA, Kai <nodakai@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
