This is needed to pass the gcc.c-torture/execute/ieee/20010114-2.c test
in the gcc testsuite.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It belongs to the DFP rounding facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
STORE CLOCK FAST should be in the SCF facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Change to match the PoP. In practice both format RIL-a and RIL-b have
the same fields. They differ on the way we decode the fields, and it's
done correctly in QEMU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The COMPARE LOGICAL IMMEDIATE AND TRAP instruction should compare the
numbers as unsigned, as its name implies.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.
This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This complete the general-instructions-extension facility, enable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
LY is part of the long-displacement facility.
RISBHG and RISBLG are part of the high-word facility.
STCMH is part of the z/Architecture.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390x floating point unit detects tininess before rounding, so set
the softfloat fp_status up appropriately.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
LOAD LENGTHENED and LOAD ROUNDED are considered as FP operations and
thus need to convert input sNaN into corresponding qNaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The cpu_mmu_index function wrongly looks at PSW P bit to determine the
MMU index, while this bit actually only control the use of priviledge
instructions. The addressing mode is detected by looking at the PSW ASC
bits instead.
This used to work more or less correctly up to kernel 3.6 as the kernel
was running in primary space and userland in secondary space. Since
kernel 3.7 the default is to run the kernel in home space and userland
in primary space. While the current QEMU code seems to work it open some
security issues, like accessing the lowcore memory in R/W mode from a
userspace process once it has been accessed by the kernel (it is then
cached by the QEMU TLB).
At the same time change the MMU_USER_IDX value so that it matches the
value used in recent kernels.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
runtime_exception computes the psw.addr value using the actual exception
address and the instruction length computed by calling the get_ilen
function. However as explained above the get_ilen code, it returns the
actual instruction length, and not the ILC. Therefore there is no need to
multiply the value by 2.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.
This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.
Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.
This fixes random segmentation faults seen in the guest.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Save the timer target value in the SPT helper, so that the STPT helper
can compute the remaining time.
This allow the Linux kernel to correctly do time accounting.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The STCKC instruction just returns the last written clock comparator
value and KVM already provides the corresponding variable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that clock_value is only used in one place, we can inline it in
the STCK helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
LOAD POSITIVE instructions (LPR, LPGR and LPGFR) set the following
condition code:
0: Result zero; no overflow
1: --
2: Result greater than zero; no overflow
3: Overflow
The current code wrongly returns 1 instead of 2 in case of a result
greater than 0. This patches fixes that. This fixes the marshalling of
the value '0L' in Python.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 7a6c7067f optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).
This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: Alexander Graf <agraf@suse.de>
kvm_s390_vcpu_interrupt_pre_save() and
kvm_s390_vcpu_interrupt_post_load() are essentially no-ops on hosts
without KVM_CAP_S390_IRQ_STATE. Move the capability check after the
check for saved IRQ state in kvm_s390_vcpu_interrupt_post_load() so that
migration between hosts without KVM_CAP_S390_IRQ_STATE (including save /
restore on the same host) continues to work.
Fixes: 3cda44f7ba ("s390x/kvm: migrate vcpu interrupt state")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is finally in place, inform the kernel that user space
supports vector registers.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When migrating a guest, be sure to include the vector registers.
The vector registers are defined in a subsection, similar to the
existing subsection for floating point registers. Since the
floating point registers are always present (and thus migrated),
we can skip them when performing the migration of the vector
registers which may or may not be present.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Create ELF notes for the vector registers where applicable, so that
their contents can be examined by utilities such as crash or readelf.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There are mechanisms to dump registers via the qemu HMP interface,
such as the "info registers" command. Expand this output to dump
the new vector registers.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
gdb allows registers to be displayed/modified, and is being updated
to account for the new vector registers. Mirror these changes in
the gdb stub in qemu so that this can be performed when gdb is
attached to the qemu gdbserver.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add handling for the Store Additional Status at Address order
that exists for the Signal Processor (SIGP) instruction.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Handle the actual syncing of the vector registers with kernel space,
via the get/put register IOCTLs.
The vector registers that were introduced with the z13 overlay
the existing floating point registers. FP registers 0-15 are
the high-halves of vector registers 0-15. Thus, remove the
freg fields and replace them with the equivalent vector field
to avoid errors in duplication. Moreover, synchronize either the
vector registers via kvm_sync_regs, or floating point registers
via the GET/SET FPU IOCTLs.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We're currently missing all instructions defined by the "interlocked-access
facility 1" which is part of zEC12. This patch implements all of them except
for LPD and LPDG.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I find it really hard to grasp what each field in the opcode list means.
Slowly walking through its semantics myself, I figured I'd write a small
summary at the top of the file to make life easier for me and whoever
looks at the file next.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The store conditional instruction wants to store when the condition
is fulfilled, so we should branch out when it's not true.
The code today branches out when the condition is true, clearly
reversing the logic. Fix it up by negating the condition.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVTLBhAAoJEL/70l94x66DkGIH/jlNJBMBGhlH/lwb1LzxtAMX
OxyDxsiwJpSxsOiZiY3oRz7d6VV6TCrmx5L+1HgG5IzU3WC61Tq6/FK4EXLepZIH
GSYlLtAALWny+2Uwsyh1Z7MMr5yxyhgeORk/l7O8pncmMeysludbEaJqQg8Aa9A2
j0B2pv4tvcl/qhuIFXL1YlbYMVXMsZy5W65D8jq+B6qf3q8kUcdKvgvbUMrxAiSH
JMISo4Z32t9w8SGnhlBa9s4HfN2yOvULRAozzkDBAu4c41cZrw16lvTV8XotamnU
LrG6eQ+2PFeIrcGhuIu7z5Bi4yiRRiThfRLCAvVApVTQYUf7IwvPNa5K1FrP9YU=
=Z/UD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
# gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-nbd: only send a limited number of errno codes on the wire
rules.mak: Force CFLAGS for all objects in DSO
configure: require __thread support
exec: move rcu_read_lock/unlock to address_space_translate callers
kvm: add support for memory transaction attributes
mtree: also print disabled regions
mtree: tag & indent a bit better
apic_common: improve readability of apic_reset_common
kvm: Silence warning from valgrind
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support to migrate vcpu interrupts.
We use ioctl KVM_S390_GET_IRQ_STATE and _SET_IRQ_STATE
to get/set the complete interrupt state for a vcpu.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the floating point registers into a seperate subsection and
bump up the version id. This cleans up the current vmstate and will
allow for a future extension with vector registers in a compatible way.
This patch is based on a patch from Eric Farman.
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
KVM_S390_INT uses only two parameter fields. This is not
enough to pass all required information for certain interrupts.
A new ioctl KVM_S390_IRQ is available which allows us to
inject all local interrupts as defined in the Principles of
Operation. It takes a struct kvm_s390_irq as a parameter
which can store interrupt payload data for all interrupts.
Let's use the new ioctl for injecting vcpu interrupts.
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Access register mode is one of the modes that control dynamic address
translation. In this mode the address space is specified by values of
the access registers. The effective address-space-control element is
obtained from the result of the access register translation. See
the "Access-Register Introduction" section of the chapter 5 "Program
Execution" in "Principles of Operations" for more details.
When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must
know which access register number to use for address translation.
This patch does several things:
- add new parameter 'uint8_t ar' to that function
- decode ar number from intercepted instructions
- pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it
to the KVM_S390_MEM_OP ioctl.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add code to make use of the new ioctl for reading from / writing to
virtual guest memory. By using the ioctl, the memory accesses are now
protected with the so-called ipte-lock in the kernel.
[CH: moved error message into kvm_s390_mem_op()]
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
KVM prefills the SYSIB, returned by STSI 3.2.2. This patch allows
userspace to intercept execution, and fill in the values, that are
known to qemu: machine name (8 chars), extended machine name (256
chars), extended machine name encoding (equals 2 for UTF-8) and UUID.
STSI322 qemu handler also finds a highest virtualization level in
level-3 virtualization stack that doesn't support Extended Names
(Ext Name delimiter) and propagates zero Ext Name to all levels below,
because this level is not capable of managing Extended Names of lower
levels.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Since there are now proper definitions for the MMU access type,
let's use them in the s390x MMU code, too, instead of the
hard-to-understand magic values.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
- handle TOD clock during migration
- CPACF key wrap options
- limit amount of pci device code we build
- ensure big endian accesses for ccws
- various fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=wS11
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150316' into staging
Final batch of s390x enhancements/fixes for 2.3:
- handle TOD clock during migration
- CPACF key wrap options
- limit amount of pci device code we build
- ensure big endian accesses for ccws
- various fixes and cleanups
# gpg: Signature made Mon Mar 16 10:01:44 2015 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150316:
s390x/config: Do not include full pci.mak
s390x/pci: fix length in sei_nt2 event
s390x/ipl: remove dead code
s390x/virtio-bus: Remove unused function s390_virtio_bus_console()
s390x: CPACF: Handle key wrap machine options
s390x/kvm: make use of generic vm attribute check
kvm: encapsulate HAS_DEVICE for vm attrs
virtio-ccw: assure BE accesses
s390x/kvm: Guest Migration TOD clock synchronization
s390x: Replace unchecked qdev_init() by qdev_init_nofail()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check for the aes_key_wrap and dea_key_wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.
This patch introduces two new machine options for indicating the state of
AES/DEA key wrapping functions. This controls whether the guest will
have access to the AES/DEA crypto functions.
aes_key_wrap="on | off" is changed to aes-key-wrap="on | off"
dea_key_wrap="on | off" is changed to dea-key-wrap="on | off"
Check for the aes-key-wrap and dea-key-wrap machine options and set the
appropriate KVM device attribute(s) to tell the kernel to enable or disable
the AES/DEA protected key functions for the guest domain.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
By using the new introduced generic interface we
can remove redundancies and clean up.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Synchronizes the guest TOD clock across a migration by sending the guest TOD
clock value to the destination system. If the guest TOD clock is not preserved
across a migration then the guest's view of time will snap backwards if the
destination host clock is behind the source host clock. This will cause the
guest to hang immediately upon resuming on the destination system.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1425912968-54387-1-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVAH/uAAoJECgfDbjSjVRprq0H/iyqLSHQIv6gNOPYQbLXOCv0
pkCeLx6kTMO9lSwxZcsZvMsYPeiEL3CHRKJcEjq0+Ap0uen0pa2Yl3WzyJcnBcib
xwkHk/UftFYAiZAzVtd4moXujvVLYNL1ukvr/wPOdIkTEn8U6K3NaT3pLooc369f
oTyQhlL3E9HJ5S6X0HXJIFwtsOIhPfS3NCLoDFbFjtb9mIsqTx7N5s2C5hctF+ir
JtyuwPx5oT73WYxoYmjSP6n/Nf5cuJdqtm6o2KijjhWWYMJ6epYVBo/DD6dIFbmJ
V/23dxpon+lvhae2c2LAVrkiJ1Boon/eMbJK/mNwpFX7vW35ataLPy6pYpaiEJs=
=RUld
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed to query machine's properties.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
to reduce the number or page table levels
- Several fixes/cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=6Cw+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into staging
s390x/kvm: Features and fixes for 2.3
- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
to reduce the number or page table levels
- Several fixes/cleanups
# gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
* remotes/borntraeger/tags/s390x-20150310:
s390-ccw: rebuild BIOS
s390/bios: Make the s390-ccw.img relocatable
elf-loader: Provide the possibility to relocate s390 ELF files
s390-ccw.img: Reinitialize guessing on reboot
s390-ccw.img: Allow bigger ramdisk sizes or offsets
s390x/kvm: passing max memory size to accelerator
virtio-ccw: Convert to realize()
virtio-s390: Convert to realize()
virtio-s390: s390_virtio_device_init() can't fail, simplify
s390x/kvm: enable the new SIGP handling in user space
s390x/kvm: deliver SIGP RESTART directly if stopped
s390x: add function to deliver restart irqs
s390x/kvm: SIGP START is only applicable when STOPPED
s390x/kvm: implement handling of new SIGP orders
s390x/kvm: trace all SIGP orders
s390x/kvm: helper to set the SIGP status in SigpInfo
s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
s390x/kvm: more details for SIGP handler with one destination vcpu
s390x: introduce defines for SIGP condition codes
synchronize Linux headers to 4.0-rc3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to
do some optimizations based on the guest memory limit.
The guest memory limit is computed by the initial definition and with the notion of
hotplugged memory.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All required SIGP handlers have been implemented in QEMU.
Let's enable the new sigp handling in user space if the kernel supports it.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-11-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
According to the PoP, a restart irq has to be delivered "without first honoring
any other pending interruptions", if a cpu is in the STOPPED state.
While it is hard to implement this case in kvm, it can easily be handled in qemu.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-10-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds a helper function to deliver restart irqs. To be able to be used
by kvm, the psw load/store methods have to perform special cc-code handling only
when running with tcg.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-9-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In preparation for other CPU states, SIGP START will only start a VCPU if it is
in the STOPPED state.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-8-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds handling code for the following SIGP orders:
- SIGP SET ARCHITECTURE
- SIGP SET PREFIX
- SIGP STOP
- SIGP STOP AND STORE STATUS
- SIGP STORE STATUS AT ADDRESS
SIGP STOP (AND STORE STATUS) are the only orders that can stay pending forever
(and may only be interrupted by resets), so special care has to be taken about
them. Their status also has to be tracked within QEMU. This patch takes
care of migrating this status (e.g. if migration happens during a SIGP STOP).
Due to the BQL, only one VCPU is currently able to execute SIGP handlers at a
time. According to the PoP, BUSY should be returned if another SIGP order is
currently being executed on a VCPU. This can only be implemented when the BQL
does not protect all handlers. For now, all SIGP orders on all VCPUs will be
serialized, which will be okay for the first shot.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-7-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds tracing code for all SIGP orders (including the destination
vcpu and the resulting condition code).
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Whenever we set the SIGP status in the status register, we have to wipe out
the lower 4 bytes and keep the higher 4 bytes. Also the condition code will
always be set to STATUS_STORED.
Let's introduce the wrapper for SigpInfo, as this will avoid most duplicate
code in the future.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-5-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The parameter of the SIGP instruction will be neded in the future. Let's read it
out and store it in the struct sigp_info, so it can be passed to the sigp
handlers.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Whenever a sigp order is to be executed by a target vcpu, we use run_on_cpu().
As we have only one pointer to pass all data to these sigp handlers, let's
introduce the struct sigp_info and use it as a transport container.
All orders targeting a single vcpu are now dispatched from a separate
handler. The destination vcpu is only valid for these orders and must not be
checked for SIGP SET ARCHITECTURE.
The sigp_info is filled with life in this new handler and used to pass the
information about the sigp order to the existing handlers. The cc is set
within these handlers.
Rename sigp_cpu_start() and sigp_cpu_restart() on the way to match the SIGP
order names (in order to avoid touching affected lines several times).
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch introduces defines for the SIGP condition codes and replaces all
occurrences of numeral condition codes with the new defines.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function is now not used anymore, so it can be removed safely.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for TPI to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the CHSC handler to correctly use logical addresses, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for STCRW to use the new logical memory access
functions. Since STCRW is suppressed on protection/access exceptions,
we also have to make sure to re-queue the CRW in case it could not be
written to the memory.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the TSCH handler to use the new logical memory access functions.
Since the channel should not be updated in case of a protection or access
exception while writing to the guest memory, the css_do_tsch() has to be
split up into two parts, one for retrieving the IRB and one for the update.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move the setting of the condition code from kvm.c into the handler
function in ioinst.c itself, just like it has been done with the other
handlers already (TSCH has just not been changed yet since it is called
from a different dispatcher in kvm.c).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for STSCH to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for SSCH to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Change the handler for MSCH to use the new logical memory
access functions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The schib parameter of css_do_msch() can be declared as const to
make it clear that it does not get modified by this function.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
According to the POP specification, the parameter blocks of various
functions like the IO instructions are accessed with logical addresses.
Thus we need a function that can read or write a buffer from/to the
guest's logical address space.
This patch now provides a function that can be used to access virtual
guest memory by using the mmu_translate function of QEMU to convert
the virtual addresses to physical.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Program access exceptions are defined to deliver a translation exception
code in the low-core. Add a function trigger_access_exception() that
generates the proper program interrupt on both KVM and non-KVM systems
and switch the existing code to use it.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We can get rid of the switch(asc) in mmu_translate_asc() by simply
selecting the right control register ASCE in the mmu_translate()
function already.
This patch is based on an original patch/idea by Ralf Hoppe.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Bit 52 in a page table entry has always to be zero, or a translation
specification exception is to be recognized.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
An Address Space Control Element (ASCE) is only the very first unit of
an s390 address translation (normally residing in one of the control
registers). The entries in the page tables are called differently.
So let's call the relevant variable pt_entry instead of asce in
mmu_translate_pte() to avoid future confusion (thus there is no
functional change in this patch, just renaming).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the "DAT-protection" bit is set in the region table entry and EDAT is
enabled, only read accesses are allowed in the corresponding memory area.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Each different level of region/segment table has a dedicated
exception type for illegal entries.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If an ASCE has illegal bits set, an ASCE-type exception should be
generated instead of a translation specification exception.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The address space bits in the translation exception code were wrong.
In fact, we can simply copy the bits from the PSW, so there's no need
for the trans_bits() function anymore.
Additionally, we now also set the fetch/store bits in the translation
exception code, so a guest can determine whether the exception occured
during a write or during a read.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When a fault occurs during the MMU lookup in s390_cpu_get_phys_page_debug(),
the trigger_page_fault() function writes the translation exception code
into the lowcore - something you would not expect during a memory access
by the debugger. Ease this problem by adding an additional parameter to
mmu_translate() which can be used to specify whether a program check and
the translation exception code should be injected or not.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The ACSEs have a table length field and the region entries have
table length and offset fields which must be checked during
translation to see whether the given virtual address is really
covered by the translation table.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The current code used a wrong and very confusing way of dealing with
the table levels by introducing a "fake level above current". However,
the real problem was simply that the checks for the region/segment
invalid bit and for the matching region/segment level was done at the
wrong spot in the code - it has to be done after the first table entry
has been looked up instead (e.g. there is also no "invalid" bit in the
ASCE itself and the current "level" has to be the same as the level in
the entry that we just looked up).
Also the entries for the segment table are quite a bit different compared
to the region table entries. So this patch moves the related code into the
function mmu_translate_segment() to make it clear at which table level we
currently are and to get rid of the ugly switch-statement in the function
mmu_translate_region().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The real-space designation bits live in the ASCEs, not in the table entries,
so the check must be done before we start walking the MMU table.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
helper.c is quite overcrowded already, so let's move the MMU
translation to a separate file instead (like it has been done
with the other targets already).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Whenever a reboot initiated by the guest is done, the reipl parameters should
remain valid. The disk configured by the guest is to be used for
ipl'ing. External reboot/reset request (e.g. via virsh reset guest) should
completely reset the guest to the initial state, and therefore also reset the
reipl parameters, resulting in an ipl behaviour of the initially configured
guest. This could be an external kernel or a disk.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To support dynamically updating the IPL device from inside the KVM
guest on the s390 platform, DIAG 308 instruction is intercepted
in QEMU to handle the request.
Subcode 5 allows to specify a new boot device, which is saved for
later in the s390_ipl device. This also allows to switch from an
external kernel to a boot device.
Subcode 6 retrieves boot device configuration that has been previously
set.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch fixes the bug with borrow_in being set incorrectly, but it
also simplifies the logic to be much more plain, improving speed. It
fixes both the 32-bit SLB* and 64-bit SLBG*.
The SLBG* change has been well-tested. I haven't tested the SLB* change
explicitly, but the code was copy-pasted from the tested code.
The error of these functions' current implementations would not likely
be triggered by compiler-generated code, since the only error was in the
state of the carry/borrow flag. Compilers rarely generate an
instruction sequence such as carry-set -> carry-set-and-use ->
carry-use.
(With Paolo's fix and mine, there are still a couple of failures from
GMP's testsuite, but they are almost surely due to incorrect code
generation from gcc 4.9. But since this gcc is running under qemu, it
might be qemu bugs. I intend to investigate this.)
Signed-off-by: Torbjorn Granlund <torbjorng@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is needed to run the GMP testsuite.
Reported-by: Torbjorn Granlund <torbjorng@google.com>
Tested-by: Torbjorn Granlund <torbjorng@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The function check_privileged() is only used in the softmmu configs;
wrap it in an #ifndef CONFIG_USER_ONLY to avoid clang warnings on the
linux-user builds.
[rth: Remove inline marker too; it was only there to prevent exactly
this warning in GCC.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1419373100-17690-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <rth@twiddle.net>
The implementation had been incomplete, as we did not store the
machine type. Note that the machine_type member is still unset
during initialization, so this has no effect yet.
Signed-off-by: Richard Henderson <rth@twiddle.net>
As described in CP programming services an unimplemented DIAGNOSE
function should return a specification exception. Today we give the
guest an operation exception.
As both exception types are suppressing and Linux as a guest does not
care about the type of program check in its exception table handler
as long as both types have the same kind of error handling (nullifying,
terminating, suppressing etc.) this was unnoticed.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix the decoding of the r1 register number in the diagnose 308 handler.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
on s390 MSI-X irqs are presented as thin or adapter interrupts
for this we have to reorganize the routing entry to contain
valid information for the adapter interrupt code on s390.
To minimize impact on existing code we introduce an architecture
function to fixup the routing entry.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch implements the s390 pci instructions in qemu. It allows
to access and drive pci devices attached to the s390 pci bus.
Because of platform constrains devices using IO BARs are not
supported. Also a device has to support MSI/MSI-X to run on s390.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch implements a pci bus for s390x together with infrastructure
to generate and handle hotplug events, to configure/unconfigure via
sclp instruction, to do iommu translations and provide s390 support for
MSI/MSI-X notification processing.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We can avoid loads of syscalls when dropping to user space by storing the values
of more registers directly within kvm_run.
Support is added for:
- ARCH0: CPU timer, clock comparator, TOD programmable register,
guest breaking-event register, program parameter
- PFAULT: pfault parameters (token, select, compare)
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's unify the code to sync registers by moving the checks into a helper
function can_sync_regs().
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The css functions are only used from ioinst.c and other files that are
only built for CONFIG_SOFTMMU. So we do not need the dummy wrappers for
the CONFIG_USER_ONLY target in the cpu.h header.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running barebox on qemu-system-mips* with '-d unimp' overloads
stderr by very very many mips_cpu_handle_mmu_fault() messages:
mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3
mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3
mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0
So it's very difficult to find LOG_UNIMP message.
The mips_cpu_handle_mmu_fault() messages appear on enabling ANY
logging! It's not very handy.
Adding separate log category for *_cpu_handle_mmu_fault()
logging fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUjw28AAoJEL/70l94x66D9kcH/RBoc4mNjrSt+MLy9Y+Fu1bu
HNhfd1n/yA0MKSHtSYwJPgkiuoxG3jHt0N69gbpZE0kdBcK+PPZZZUpTFIAU6vD/
D0O7l+2viOcl2z7SPuHIp9/O0CChsAYZkH+Zn2XbeStbe4d4f6bFzdy4vblMsirQ
BfMn/Y2Dw1uLknvrO3/QKgGhbK5Nxo/Te7lavRP+w7FgOhAdAUHOhBPfGrPWtG+0
0hVWmxoQyJtk+Ltt2oF4zUkql7czDsgyXkaO82l3TkecCvtqolCuby4lQIFJnq7E
vw0XUDwC/l/MWnXFq/rG97yopfIxkSAthT/xP/+TTJKM/oJEWDTh6I8ghQTdG90=
=ncys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Migration and linuxboot fixes for 2.2 regressions
- valgrind/KVM support
- small i386 patches
- PCI SD host controller support
- malloc/free cleanups from Markus (x86/scsi)
- IvyBridge model
- XSAVES support for KVM
- initial patches from record/replay
# gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
sdhci: Support SDHCI devices on PCI
sdhci: Define SDHCI PCI ids
sdhci: Add "sysbus" to sdhci QOM types and methods
sdhci: Remove class "virtual" methods
sdhci: Set a default frequency clock
serial: only resample THR interrupt on rising edge of IER.THRI
serial: update LSR on enabling/disabling FIFOs
serial: clean up THRE/TEMT handling
serial: reset thri_pending on IER writes with THRI=0
linuxboot: fix loading old kernels
kvm/apic: fix 2.2->2.1 migration
target-i386: add Ivy Bridge CPU model
target-i386: add f16c and rdrand to Haswell and Broadwell
target-i386: add VME to all CPUs
pc: add 2.3 machine types
i386: do not cross the pages boundaries in replay mode
cpus: make icount warp behave well with respect to stop/cont
timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock
cpu-exec: invalidate nocache translation if they are interrupted
icount: introduce cpu_get_icount_raw
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
struct kvm_fpu contains an alignment padding on s390x. Let's use a
designated initializer to avoid false positives from valgrind/memcheck.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute kvm_irqfds_allowed by checking the KVM_CAP_IRQFD extension.
Remove direct settings in architecture specific files.
Add a new kvm_resamplefds_allowed variable, initialized by
checking the KVM_CAP_IRQFD_RESAMPLE extension. Add a corresponding
kvm_resamplefds_enabled() function.
A special notice for s390 where KVM_CAP_IRQFD was not immediatly
advirtised when irqfd capability was introduced in the kernel.
KVM_CAP_IRQ_ROUTING was advertised instead.
This was fixed in "KVM: s390: announce irqfd capability",
ebc3226202d5956a5963185222982d435378b899 whereas irqfd support
was brought in 84223598778ba08041f4297fda485df83414d57e,
"KVM: s390: irq routing for adapter interrupts". Both commits
first appear in 3.15 so there should not be any kernel
version impacted by this QEMU modification.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Array index starts at 0, so the valid index of ext_queue array,
io_queue array, mchk_queue array should be MAX_EXT_QUEUE - 1,
MAX_IO_QUEUE - 1, MAX_MCHK_QUEUE - 1.
The original checks missed the invalid bound value, which will lead
possible out of bounds read in the follow codes.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
commit a2b257d621 "memory: expose alignment used for allocating RAM
as MemoryRegion API" triggered a compile error on KVM/s390x.
Fix the prototype and the implementation of legacy_s390_alloc.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
introduce memory_region_get_alignment() that returns
underlying memory block alignment or 0 if it's not
relevant/implemented for backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running "sparse" with the s390x kvm.c code, it complains that
"constant 0x00400f1d40330000 is so big it is long" - let's fix this
by appending a proper suffix.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The second byte of the opcode is encoded in the lowest byte of the ipb
field, not the lowest byte of the ipa field.
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
The SAM instructions simply change 2 bits in PSW.MASK to advertise
the current memory mode. While we can't fully guarantee that 31 bit
mode (or even remotely 24 bit mode) actually work correctly, we don't
check whether lpswe modifies these bits, so we shouldn't keep the
guest from executing SAM instructions either.
This patch implements all SAM instrutions with their actual PSW changing
semantics, making more recent Linux kernels boot properly which do issue
a SAM31 call during early boot.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When injecting an sclp console interrupt into the guest, we increase
the PC by 4 for some reason. I have no idea why I put that code there,
but it's clearly wrong. Remove the increment.
This patch fixes sclp serial input for the ccw machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
This patch provides the cpu save information for dumps and later life
migration and enables migration of the CPU state. The code is based on
earlier work from Christian Borntraeger and Jason Herne.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
[provide cpu_post_load()]
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Jason J. Herne <jjherne@us.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Cornelia Huck: tweaked cpu_post_load() comment]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to synchronize registers after a reset has been performed. The
current code does that in qemu_system_reset(), load_normal_reset() and
modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET,
this needs to be done for the targeted vcpu as well, so let's call
cpu_synchronize_post_reset() in the respective handlers.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and
CONFIG_USER_ONLY ifdefs in cpu.c.
In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a
dummy implementation - the two definitions are moved to the proper section in
cpu.h.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.
The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).
Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).
A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Until now, when a s390 cpu was stopped or halted, the number of running
CPUs was tracked in a global variable. This was problematic for migration,
so Jason came up with a per-cpu running state.
As it turns out, we want to track the full logical state of a target vcpu,
so we need real s390 cpu states.
This patch is based on an initial patch by Jason Herne, but was heavily
rewritten when adding the cpu states STOPPED and OPERATING. On the way we
move add_del_running to cpu.c (the declaration is already in cpu.h) and
modify the users where appropriate.
Please note that the cpu is still set to be stopped when it is
halted, which is wrong. This will be fixed in the next patch. The LOAD and
CHECK-STOP state will not be used in the first step.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
[folded Jason's patch into David's patch to avoid add/remove same lines]
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1410626734-3804-9-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for format-0 ccws in channel programs. As a format-1 ccw
contains the same information as format-0 ccws, only supporting larger
addresses, simply convert every ccw to format-1 as we walk the chain.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch cleanes up two coding style issues (missing whitespaces).
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch reduces the core registers to the psw and the general purpose
registers. The fpc and ac registers are handled as coprocessors registers by gdb.
This allows to reuse the feature xml files taken from gdb without further
modification and is what other architectures do.
The target.xml is now generated and provided to the gdb client. Therefore, the
client doesn't have to guess which registers are available at which logical
register number.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When reading/writing the psw mask, the condition code may only be touched if
running on tcg.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add memory information to read SCP info and add handlers for
Read Storage Element Information, Attach Storage Element,
Assign Storage and Unassign Storage.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When determining the memory increment size, use the maxmem size if
it was specified.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As all full cpu resets currently call into the kernel to do initial cpu reset,
let's run this reset (triggered by cpu_s390x_init()) on the proper vcpu thread.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's execute resets triggered by qemu system resets on the target vcpu thread.
This will avoid synchronize_rcu's in the kernel.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All sigp orders that can result in ioctls on the target vcpu should be executed
on the associated vcpu thread.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently, load_normal_reset() and modified_clear_reset() as triggered
by a guest vcpu will initiate cpu resets on the current vcpu thread for
all cpus. The reset should happen on the individual vcpu thread
instead, so let's use run_on_cpu() for this.
This avoids calls to synchronize_rcu() in the kernel.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add code to kvm_arch_get_registers and kvm_arch_put_registers to
save/restore floating point registers. This missing sync was
unnoticed until migration of userspace that uses fprs.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Update patch to latest upstream]
Cc: qemu-stable@nongnu.org
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The ld_code6() function is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
'monitor.h' is still included in target-s390x/kvm.c, since I have
no good way to verify whether other code need it on my x86 host.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Try to inject floating interrupts via the flic if it is available.
This allows us to inject the full range of floating interrupts.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Remove the need for a cpu to inject a floating interrupt on kvm.
Acked-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add kvm_s390_{vcpu,floating}_interrupt, which offer the possibility
to inject interrupts with larger payloads (when a kvm backend becomes
available).
Moreover, kvm_s390_floating_interrupt() does no longer have the bogus
requirement for a vcpu.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
