The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename trace_event_iter_init() to trace_event_iter_init_pattern(),
add trace_event_iter_init_all() for interating over all events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-3-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
One more little step towards modular tcg ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-35-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow commands having a NULL cmd pointer, add a function to set the
pointer later. Use case: allow modules implement hmp commands.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-31-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the management layer queries a binary built using --disable-tpm
for TPM devices, it gets confused by getting empty responses:
{ "execute": "query-tpm" }
{
"return": [
]
}
{ "execute": "query-tpm-types" }
{
"return": [
]
}
{ "execute": "query-tpm-models" }
{
"return": [
]
}
To make it clearer by returning an error:
- Make the TPM QAPI schema conditional
All of tpm.json is now 'if': 'defined(CONFIG_TPM)'.
- Adapt the HMP command
- Remove stubs which became unnecessary
The management layer now gets a 'CommandNotFound' error:
{ "execute": "query-tpm" }
{
"error": {
"class": "CommandNotFound",
"desc": "The command query-tpm has not been found"
}
}
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit f61fe11aa6 broke hmp_loadvm() by adding an incorrect negation
when converting from 0/-errno return values to a bool value. The result
is that loadvm resumes the VM now if it failed and keeps it stopped if
it failed. Fix it to restore the old behaviour and do it the other way
around.
Fixes: f61fe11aa6
Cc: qemu-stable@nongnu.org
Reported-by: Yanhui Ma <yama@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210511163151.45167-1-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=RJvy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210513a' into staging
Migration pull 2021-05-13
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 13 May 2021 18:36:06 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210513a:
tests/migration: introduce multifd into guestperf
tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths
tests/migration-test: Fix "true" vs true
migration/ram: Use offset_in_ramblock() in range checks
migration/multifd: Print used_length of memory block
migration/ram: Handle RAM block resizes during postcopy
migration/ram: Simplify host page handling in ram_load_postcopy()
migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()
exec: Relax range check in ram_block_discard_range()
migration/ram: Handle RAM block resizes during precopy
numa: Make all callbacks of ram block notifiers optional
numa: Teach ram block notifiers about resizeable ram blocks
util: vfio-helpers: Factor out and fix processing of existing ram blocks
migration: Drop redundant query-migrate result @blocked
migration/ram: Optimize ram_save_host_page()
migration/ram: Reduce unnecessary rate limiting
migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Result @blocked is redundant. Unfortunately, we realized this too
close to the release to risk dropping it, so we deprecated it
instead, in commit e11ce6c06.
Since it was deprecated from the start, we can delete it without
the customary grace period. Do so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210429140424.2802929-1-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The QMP dispatcher coroutine holds the qmp_queue_lock over a yield
point, where it expects to be rescheduled from the main context. If a
CHR_EVENT_CLOSED event is received just then, it can race and block the
main thread on the mutex in monitor_qmp_cleanup_queue_and_resume.
monitor_resume does not need to be called from main context, so we can
call it immediately after popping a request from the queue, which allows
us to drop the qmp_queue_lock mutex before yielding.
Suggested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20210322154024.15011-1-s.reiter@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch provides a new qmp to reload display configuration
without restart VM, but only reloading the vnc tls certificates
is implemented.
Example:
{"execute": "display-reload", "arguments":{"type": "vnc", "tls-certs": true}}
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Message-Id: <20210316075845.1476-4-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command query-qmp-schema:
suppress information on deprecated commands, events and object type
members, i.e. anything that has the special feature flag "deprecated".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-8-armbru@redhat.com>
QMP commands return their response as a generated QAPI type, which the
monitor core converts to JSON via QObject.
query-qmp-schema's response is the generated introspection data. This
is a QLitObject since commit 7d0f982bfb "qapi: generate a literal
qobject for introspection", v2.12). Before, it was a string. Instead
of converting QLitObject / string -> QObject -> QAPI type
SchemaInfoList -> QObject -> JSON, we take a shortcut: the command is
'gen': false, so it can return the QObject instead of the QAPI type.
Slightly simpler and more efficient.
The next commit will filter the response for output policy, and this
is easier in the SchemaInfoList representation. Drop the shortcut.
This replaces the manual command registration by a generated one. The
manual registration makes the command available before the machine is
built by passing flag QCO_ALLOW_PRECONFIG. To keep it available
there, we need need to add 'allow-preconfig': true to its definition
in the schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-7-armbru@redhat.com>
This switches the HMP command object_add from a QemuOpts-based parser to
user_creatable_add_from_str() which uses a keyval parser and enforces
the QAPI schema.
Apart from being a cleanup, this makes non-scalar properties and help
accessible. In order for help to be printed to the monitor instead of
stdout, the printf() calls in the help functions are changed to
qemu_printf().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This converts object-add from 'gen': false to the ObjectOptions QAPI
type. As an immediate benefit, clients can now use QAPI schema
introspection for user creatable QOM objects.
It is also the first step towards making the QAPI schema the only
external interface for the creation of user creatable objects. Once all
other places (HMP and command lines of the system emulator and all
tools) go through QAPI, too, some object implementations can be
simplified because some checks (e.g. that mandatory options are set) are
already performed by QAPI, and in another step, QOM boilerplate code
could be generated from the schema.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The code comment suggests removing QAPIEvent_(str|lookup) symbols too,
however, these are both auto-generated as standard for any enum in
QAPI. As such it they'll exist whether we use them or not.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only semantically useful for QMP.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VNC ACL concept has been replaced by the pluggable "authz" framework
which does not use monitor commands.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Removed various qemu_mutex_lock and their respective qemu_mutex_unlock
calls and used lock guard macros (QEMU_LOCK_GUARD and
WITH_QEMU_LOCK_GUARD). This simplifies the code by
eliminating qemu_mutex_unlock calls.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210311031538.5325-6-ma.mandourr@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Before this patch, monitor_qmp_dispatcher_co() used to check whether
shutdown is requested only when it would have to wait for new requests.
If there were still some queued requests, it would try to execute all of
them before shutting down.
This can be surprising when the queued QMP commands take long or hang
because Ctrl-C may not actually exit QEMU as soon as possible.
Change monitor_qmp_dispatcher_co() so that it additionally checks
whether shutdown is request before it gets a new request from the queue.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210212172028.288825-3-kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 357bda95 already tried to fix the order in monitor_cleanup() by
moving shutdown of the dispatcher coroutine further to the start.
However, it didn't go far enough:
iothread_stop() makes sure that all pending work (bottom halves) in the
AioContext of the monitor iothread is completed. iothread_destroy()
depends on this and fails an assertion if there is still a pending BH.
While the dispatcher coroutine is running, it will try to resume the
monitor after taking a request out of the queue, which involves a BH.
The dispatcher is run until it terminates in the AIO_WAIT_WHILE() loop.
However, adding new BHs between iothread_stop() and iothread_destroy()
is forbidden.
Fix this by stopping the dispatcher first before shutting down the other
parts of the monitor. This means we can now receive requests that aren't
handled any more when QEMU is shutting down, but this is unlikely to be
a problem for QMP clients.
Fixes: 357bda9590
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210212172028.288825-2-kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make snapshot deletion consistent with the snapshot save
and load commands by using a wrapper around the blockdev
layer. The main difference is that we get upfront validation
of the passed in device list (if any).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify load_snapshot/save_snapshot to accept the device list and vmstate
node name parameters previously added to the block layer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-9-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
to be controlled allowing for safer behaviour with a future QMP command.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-8-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.
Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Update 'info migrate' to display migration blocking information.
If the outbound migration is not blocked, there is no change, however
if it is blocked a message is displayed with a list of reasons why,
e.g.
qemu-system-x86_64 -nographic -smp 4 -m 4G -M pc,usb=on \
-chardev null,id=n -device usb-serial,chardev=n \
-virtfs local,path=/home,mount_tag=fs,security_model=none \
-drive if=virtio,file=myimage.qcow2
(qemu) info migrate
globals:
store-global-state: on
only-migratable: off
send-configuration: on
send-section-footer: on
decompress-error-check: on
clear-bitmap-shift: 18
Outgoing migration blocked:
Migration is disabled when VirtFS export path '/home' is mounted in the guest using mount_tag 'fs'
non-migratable device: 0000:00:01.2/1/usb-serial
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-3-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0)
switched MigrationParameters to narrower integer types, and removed
the simplified qmp_migrate_set_parameters()'s argument checking
accordingly.
Good idea, except qmp_migrate_set_parameters() takes
MigrateSetParameters, not MigrationParameters. Its job is updating
migrate_get_current()->parameters (which *is* of type
MigrationParameters) according to its argument. The integers now get
truncated silently. Reproducer:
---> {'execute': 'query-migrate-parameters'}
<--- {"return": {[...] "compress-threads": 8, [...]}}
---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}}
<--- {"return": {}}
---> {'execute': 'query-migrate-parameters'}
<--- {"return": {[...] "compress-threads": 1, [...]}}
Fix by resynchronizing MigrateSetParameters with MigrationParameters.
Fixes: 741d4086c8
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-2-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
monitor_qmp_dispatcher_co() needs to resume the monitor if
handle_qmp_command() suspended it. Two cases:
1. OOB enabled: suspended if mon->qmp_requests has no more space
2. OOB disabled: suspended always
We resume only after we processed the request. Which can take a long
time.
Resume the monitor right when the queue has space to keep the monitor
available for out-of-band commands even in this corner case.
Leave the "OOB disabled" case alone.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-4-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[Trailing whitespace tidied up]
Add tracepoints for in-band request enqueue and dequeue, processing of
queued in-band errors, and responses.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-3-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" replaced
monitor_qmp_bh_dispatcher() by monitor_qmp_dispatcher_co(), but
neglected to update comments. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-2-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The qmp-cmds.c file currently includes ui/vnc.h, which (being located
in the ui/ directory rather than include) is really supposed to be
for use only by the ui subsystem. In fact the function prototypes we
need (vnc_display_password(), etc) are all declared in
include/ui/console.h, so we can switch to including that instead.
(ui/vnc.h includes include/ui/console.h, so this change strictly
reduces the quantity of headers qmp-cmds.c pulls in.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210104161200.15068-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 54aa3de72e switched multiple sites to use QAPI_LIST_PREPEND
instead of open-coding, but missed a couple of spots.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210113221013.390592-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The HMP command \"change vnc TARGET\" is messy:
- it takes an ugly shortcut to determine if the option has an "id",
with incorrect results if "id=" is not preceded by an unescaped
comma.
- it deletes the existing QemuOpts and does not try to rollback
if the parsing fails (which is not causing problems, but only due to
how VNC options are parsed)
- because it uses the same parsing function as "-vnc", it forces
the latter to not support "-vnc help".
On top of this, it uses a deprecated QMP command, thus getting in
the way of removing the QMP command. Since the usecase for the
command is not clear, just remove it and send "change vnc password"
directly to the QMP "change-vnc-password" command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
Enable removing tcg/$tcg_arch from the include path when TCG is disabled.
Move translate-all.h to include/exec, since stubs exist for the functions
defined therein.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
GString has a richer set of string operations than QString. It should
be preferred to QString except where we need a QObject or reference
counting. We don't here. Switch to GString, and put its richer
interface to use.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-3-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 48c043d0d1 "hmp: human-monitor-command: stop using the Memory
chardev driver" left us "if string is non-empty, duplicate it, else
duplicate the empty string". Meh. Duplicate it unconditionally.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-2-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
