* Fix breakage of icount mode when guest touches MDCR_EL3, MDCR_EL2,
PMCNTENSET_EL0 or PMCNTENCLR_EL0
* Make writes to MDCR_EL3 use PMU start/finish calls
* Let AArch32 write to SDCR.SCCD
* Rearrange cpu64.c so all the CPU initfns are together
* hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers
* hw/arm/virt: fix some minor issues with generated device tree
* Fix regression where EL3 could not write to SP_EL1 if there is no EL2
-----BEGIN PGP SIGNATURE-----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=edYy
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220930' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix breakage of icount mode when guest touches MDCR_EL3, MDCR_EL2,
PMCNTENSET_EL0 or PMCNTENCLR_EL0
* Make writes to MDCR_EL3 use PMU start/finish calls
* Let AArch32 write to SDCR.SCCD
* Rearrange cpu64.c so all the CPU initfns are together
* hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers
* hw/arm/virt: fix some minor issues with generated device tree
* Fix regression where EL3 could not write to SP_EL1 if there is no EL2
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmM28EYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3mw9D/44e72KHZdfr3F/Cmd0Jku2
# g5NQ4ooKV90rY4Y4+/VR9Z2k7a72lWFgFl7/54AKXSZsZSmNomeh2WxWJAs1lA2W
# 4rmGPlLwxZYMQumYcMOArYxJQgRK5exVtE6ECKM/JERjhKSbnL1lyLWGUyLtFJfq
# SjxoTWEigPHu+0fX/nk04rFzrA6Bo1qKQqZZTuN9zcT6JXyQMjZNF89Fxy9OlV4s
# dlOXsZILV8oREnGdDFPYLgwSTMn+1rrD8xfjK/DTQrlUVX/9zhlIeKg5O4JadxCy
# 8ThIFCyODUanlRvyjHiwvcvStHn8wwyCp4uJrxmZGyyp4t4u3etG0hpsZaPtiN9O
# NKtad4Aoc6lSmIDhYYZA1LIIdSIeyUPD/LyWTd+qKK7A7mxH6ORr0uyjhb01jWs3
# ceyne1i0n66oRLbHxPyjQEkLqwLl2CsqWr41BNM5RVoYjCU8HYSvEwlh7t+EZCL5
# IRkfAWJkA9bdXL30ZmYSzJ7hfvVkWhDsHD+eOzAcsxoApgzI5Mfi7gCIZ+LNY20P
# W0akGbA6l0InsmIcBpyXEztPOi6tOD/J55qeOCrzHjgfhoJWCoa/mS8bVqN0mKIA
# yJ7QbiK/JY6+G1v2oM8aARLn8/C7oLnMYiKntXNBMj67Ry5GwjDt+A37MUHgQbZb
# yUzUjr3O2N1qJRKi+Dd7eA==
# =edYy
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 30 Sep 2022 09:33:58 EDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20220930' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: mark SP_EL1 with ARM_CP_EL3_NO_EL2_KEEP
hw/arm/virt: Fix devicetree warning about the SMMU node
hw/arm/virt: Use "msi-map" devicetree property for PCI
hw/arm/virt: Fix devicetree warning about the GIC node
hw/arm/virt: Fix devicetree warning about the root node
hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllers
target/arm: Rearrange cpu64.c so all the CPU initfns are together
target/arm: Update SDCR_VALID_MASK to include SCCD
target/arm: Make writes to MDCR_EL3 use PMU start/finish calls
target/arm: Mark registers which call pmu_op_start() as ARM_CP_IO
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't want it to be possible to re-read the RNG seed after ingesting
it, because this ruins forward secrecy. Currently, however, the setup
data section can just be re-read. Since the kernel is always read after
the setup data, use the selection of the kernel as a trigger to
re-initialize the RNG seed, just like we do on reboot, to preserve
forward secrecy.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220922152847.3670513-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CHS-based disk utilities and operating systems may adjust the logical
geometry of a hard drive to cope with the expectations or limitations
of software using the ATA INITIALIZE_DEVICE_PARAMETERS command.
Prior to this patch, INITIALIZE_DEVICE_PARAMETERS was a nop that
always returned success, raising the possibility of data loss or
corruption if the CHS<->LBA translation redirected a write to the
wrong sector.
* hw/ide/core.c
ide_reset():
Reset the logical CHS geometry of the hard disk when the power-on
defaults feature is enabled.
cmd_specify():
a) New function implementing INITIALIZE_DEVICE_PARAMETERS.
b) Ignore calls for empty or ATAPI devices.
cmd_set_features():
Implement the power-on defaults enable and disable features.
struct ide_cmd_table:
Switch WIN_SPECIFY from cmd_nop() to cmd_specify().
ide_init_drive():
Set new fields 'drive_heads' and 'drive_sectors' based upon the
actual disk geometry.
* include/hw/ide/internal.h
struct IDEState:
a) Store the actual drive CHS values within the new fields
'drive_heads' and 'drive_sectors.'
b) Track whether a soft IDE reset should also reset the logical CHS
geometry of the hard disk within the new field 'reset_reverts'.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-7-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Prior to this patch, cmd_exec_dev_diagnostic relied upon
ide_set_signature to clear the device register. While the
preservation of the drive bit by ide_set_signature is necessary for
the DEVICE RESET, IDENTIFY DEVICE, and READ SECTOR commands,
ATA/ATAPI-6 specifies that "DEV shall be cleared to zero" for EXECUTE
DEVICE DIAGNOSTIC.
This deviation was uncovered by the ATACT Device Testing Program
written by Hale Landis.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-3-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eliminate the remaining TODOs in hw/ide/piix.c by:
* Using pci_set_{size} functions to write the PIIX PCI configuration
space instead of manipulating it directly as an array; and
* Documenting the default register values by reference to the
controlling specification.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-1-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5f76a7aac1 is looking harmless from
the first glance, but it has changed things a lot. 'libvirt' uses it to
detect that it should follow new initialization way and this changes
things considerably. With this procedure followed, blockdev_init() is
not called anymore and thus block_acct_setup() helper is not called.
This means in particular that defaults for block accounting statistics
are changed and account_invalid/account_failed are actually initialized
as false instead of true originally.
This commit changes things to match original world. There are the following
constraints:
* new default value in block_acct_init() is set to true
* block_acct_setup() inside blockdev_init() is called before
blkconf_apply_backend_options()
* thus newly created option in block device properties has precedence if
specified
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The structure is for device dvsec not port dvsec. Change type to fix
this issue.
Signed-off-by: Tong Zhang <t.zhang2@samsung.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220915175853.2902-1-t.zhang2@samsung.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GCC issues a false positive warning, resulting in build failure with -Werror:
In file included from /usr/include/glib-2.0/glib.h:114,
from src/include/glib-compat.h:32,
from src/include/qemu/osdep.h:144,
from ../src/hw/virtio/vhost-shadow-virtqueue.c:10:
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘vhost_handle_guest_kick’ at ../src/hw/virtio/vhost-shadow-virtqueue.c:292:42:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘elem’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_handle_guest_kick’:
../src/hw/virtio/vhost-shadow-virtqueue.c:292:42: note: ‘elem’ was declared here
292 | g_autofree VirtQueueElement *elem;
| ^~~~
cc1: all warnings being treated as errors
There is actually no problem since "elem" is initialized in both branches.
Silence the warning by initializig it with "NULL".
$ gcc --version
gcc (GCC) 12.2.0
Fixes: 9c2ab2f1ec ("vhost: stop transfer elem ownership in vhost_handle_guest_kick")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220910151117.6665-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The SMMUv3 node isn't expected to have clock properties
(unlike the SMMUv2). Fix the corresponding dt-validate warning:
smmuv3@9050000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: linux/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message as suggested by Eric]
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-7-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "msi-parent" property can be used on the PCI node when MSIs do not
contain sideband data (device IDs) [1]. In QEMU, MSI transactions
contain the requester ID, so the PCI node should use the "msi-map"
property instead of "msi-parent". In our case the property describes an
identity map between requester ID and sideband data.
This fixes a warning when passing the DTB generated by QEMU to dtc,
following a recent change to the GICv3 node:
Warning (msi_parent_property): /pcie@10000000:msi-parent: property size (4) too small for cell size 1
[1] linux/Documentation/devicetree/bindings/pci/pci-msi.txt
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv3 bindings requires a #msi-cells property for the ITS node. Fix
the corresponding dt-validate warning:
interrupt-controller@8000000: msi-controller@8080000: '#msi-cells' is a required property
From schema: linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The devicetree specification requires a 'model' property in the root
node. Fix the corresponding dt-validate warning:
/: 'model' is a required property
From schema: dtschema/schemas/root-node.yaml
Use the same name for model as for compatible. The specification
recommends that 'compatible' follows the format 'manufacturer,model' and
'model' follows the format 'manufacturer,model-number'. Since our
'compatible' doesn't observe this, 'model' doesn't really need to
either.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect ZynqMP's USB controllers.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the close-on-exec flags is not set on the file descriptors returned
by socketpair() at default, the fds will survive across exec' function.
In the case that exec' function get invoked, such as the live-update feature
which is been developing, it will cause fd leaks.
To address this problem, we should call qemu_socketpair() to create an pair of
connected sockets with the close-on-exec flag set.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7002b12a5fb0a30cd878e14e07da61c36da72913.1661240709.git.tugy@chinatelecom.cn>
Unaligned i/o access on serial UART works on real PCs.
This is used for example by FreeDOS CTMouse driver. Without this it
can't reset and detect serial mice.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/77
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-6-arwed.meyer@gmx.de>
This was deprecated in 6.2 and is ready to go. It removes quite a bit
of code that handled the registration of watchdog models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On error, vfio_get_iommu_info() frees and clears *info, but
vfio_connect_container() continues to use the pointer regardless
of the return value. Restructure the code such that a failure
of this function triggers an error and clean up the remainder of
the function, including updating an outdated comment that had
drifted from its relevant line of code and using host page size
for a default for better compatibility on non-4KB systems.
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20220910004245.2878-1-nicolinc@nvidia.com/
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/166326219630.3388898.12882473157184946072.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The structure VFIOMigration of a VFIODevice is allocated and initialized
in vfio_migration_init(). "device_state" and "vm_running" are initialized
to 0, indicating that VFIO device is_STOP and VM is not-running. The
initialization value is incorrect. According to the agreement, default
state of VFIO device is _RUNNING. And if a VFIO device is hot-plugged
while the VM is running, "vm_running" should be 1. This patch fixes it.
Fixes: 02a7e71b1e ("vfio: Add VM state change handler to know state of VM")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20220711014651.1327-1-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make guest os access pci device control 2 reg for passthrough device
as struct XenPTRegInfo described in the file hw/xen/xen_pt.h.
/* reg read only field mask (ON:RO/ROS, OFF:other) */
uint32_t ro_mask;
/* reg emulate field mask (ON:emu, OFF:passthrough) */
uint32_t emu_mask;
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1196
Signed-off-by: Aaron Liu <Aaron.Liu@amd.com>
Signed-off-by: Ruili Ji <ruili.ji@amd.com>
Message-ID: <BL1PR12MB599341DC55BA53FE588DE14E9B7E9@BL1PR12MB5993.namprd12.prod.outlook.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This reverts 3824e25db1 ("x86: disable rng seeding via setup_data"), but
for 7.2 rather than 7.1, now that modifying setup_data is safe to do.
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921093134.2936487-4-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since this is read from fw_cfg on each boot, the kernel zeroing it out
alone is insufficient to prevent it from being used twice. And indeed on
reboot we always want a new seed, not the old one. So re-fill it in this
circumstance.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921093134.2936487-3-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred style is SetupData as a typedef, not setup_data as a plain
struct.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921093134.2936487-2-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If setup_data is being read into a specific memory location, then
generally the setup_data address parameter is read first, so that the
caller knows where to read it into. In that case, we should return
setup_data containing the absolute addresses that are hard coded and
determined a priori. This is the case when kernels are loaded by BIOS,
for example. In contrast, when setup_data is read as a file, then we
shouldn't modify setup_data, since the absolute address will be wrong by
definition. This is the case when OVMF loads the image.
This allows setup_data to be used like normal, without crashing when EFI
tries to use it.
(As a small development note, strangely, fw_cfg_add_file_callback() was
exported but fw_cfg_add_bytes_callback() wasn't, so this makes that
consistent.)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-Id: <20220921093134.2936487-1-Jason@zx2c4.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was returned as error before. Instead of it, simply update the
corresponding field so qemu can send it in the migration data.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Like commit 034d00d485 ("e1000: set RX descriptor status in
a separate operation"), there is also same issue in e1000e, which
would cause lost packets or stop sending packets to VM with DPDK.
Do similar fix in e1000e.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/402
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The scanout is currently updated only if the whole rect is inside the
scanout space. This is not a correct condition because the scanout should
be updated even a small area in the scanout space is covered by the rect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220909014052.7297-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building QEMU with DEBUG_ATI defined then running with
'-device ati-vga,romfile="" -d unimp,guest_errors -trace ati\*'
we get:
ati_mm_write 4 0x16c0 DP_CNTL <- 0x1
ati_mm_write 4 0x146c DP_GUI_MASTER_CNTL <- 0x2
ati_mm_write 4 0x16c8 DP_MIX <- 0xff0000
ati_mm_write 4 0x16c4 DP_DATATYPE <- 0x2
ati_mm_write 4 0x224 CRTC_OFFSET <- 0x0
ati_mm_write 4 0x142c DST_PITCH_OFFSET <- 0xfe00000
ati_mm_write 4 0x1420 DST_Y <- 0x3fff
ati_mm_write 4 0x1410 DST_HEIGHT <- 0x3fff
ati_mm_write 4 0x1588 DST_WIDTH_X <- 0x3fff3fff
ati_2d_blt: vram:0x7fff5fa00000 addr:0 ds:0x7fff61273800 stride:2560 bpp:32 rop:0xff
ati_2d_blt: 0 0 0, 0 127 0, (0,0) -> (16383,16383) 16383x16383 > ^
ati_2d_blt: pixman_fill(dst:0x7fff5fa00000, stride:254, bpp:8, x:16383, y:16383, w:16383, h:16383, xor:0xff000000)
Thread 3 "qemu-system-i38" received signal SIGSEGV, Segmentation fault.
(gdb) bt
#0 0x00007ffff7f62ce0 in sse2_fill.lto_priv () at /lib64/libpixman-1.so.0
#1 0x00007ffff7f09278 in pixman_fill () at /lib64/libpixman-1.so.0
#2 0x0000555557b5a9af in ati_2d_blt (s=0x631000028800) at hw/display/ati_2d.c:196
#3 0x0000555557b4b5a2 in ati_mm_write (opaque=0x631000028800, addr=5512, data=1073692671, size=4) at hw/display/ati.c:843
#4 0x0000555558b90ec4 in memory_region_write_accessor (mr=0x631000039cc0, addr=5512, ..., size=4, ...) at softmmu/memory.c:492
Commit 584acf34cb ("ati-vga: Fix reverse bit blts") introduced
the local dst_x and dst_y which adjust the (x, y) coordinates
depending on the direction in the SRCCOPY ROP3 operation, but
forgot to address the same issue for the PATCOPY, BLACKNESS and
WHITENESS operations, which also call pixman_fill().
Fix that now by using the adjusted coordinates in the pixman_fill
call, and update the related debug printf().
Reported-by: Qiang Liu <qiangliu@zju.edu.cn>
Fixes: 584acf34cb ("ati-vga: Fix reverse bit blts")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20210906153103.1661195-1-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The xHCI controller will ignore the endpoint MTU and so may deliver
packets of any length. Detect short packets as being any packet that
has a length of zero or a length that is not a multiple of the MTU.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-4-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB_CDC_SET_ETHERNET_PACKET_FILTER request is mandatory for
CDC-ECM devices. Accept this request, ignoring the actual filter
value (to match the existing behaviour for RNDIS).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-3-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usbnet_receive() does not currently wake up the USB endpoint, leading
to a dead RX datapath when used with a host controller such as xHCI
that relies on being woken up.
Fix by adding a call to usb_wakeup() at the end of usbnet_receive().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-2-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The abort() in xhci_find_stream() can be triggered via enabling the secondary
stream arrays by setting linear stream array (LSA) bit (in endpoint context) to
0. We may show warnings and drop this operation.
Fixes: 024426acc0 ("usb-xhci: usb3 streams")
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1192
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220904125926.2141607-1-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add handler for fatal errors. Moves device into error state where it
stops responding until the guest resets it.
Guest can send illegal requests where scsi command and usb packet
transfer directions are inconsistent. Use the new usb_msd_fatal_error()
function instead of assert() in that case.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220830063827.813053-3-kraxel@redhat.com>
Change ordering to avoid adding forward declarations in
following patches. Fix comment code style while being
at it. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220830063827.813053-2-kraxel@redhat.com>
Various tools, such as kexec-tools and m68k-bootinfo, expect each
bootinfo entry to be aligned to 4 bytes, not 2 bytes. So adjust the
padding to fill this out as such.
Also, break apart the padding additions from the other field length
additions, so that it's more clear why these magic numbers are being
added, and comment them too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220926113900.1256630-2-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On the OpenTitan hardware the resetvec is fixed at the start of ROM. In
QEMU we don't run the ROM code and instead just jump to the next stage.
This means we need to be a little more flexible about what the resetvec
is.
This patch allows us to set the resetvec from the command line with
something like this:
-global driver=riscv.lowrisc.ibex.soc,property=resetvec,value=0x20000400
This way as the next stage changes we can update the resetvec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914101108.82571-4-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The resetvec for the OpenTitan machine ended up being set to an out of
date value, so let's fix that and bump it to the correct start address
(after the boot ROM)
Fixes: bf8803c64d "hw/riscv: opentitan: bump opentitan version"
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220914101108.82571-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Updates the `EVENT_ENABLE` register to offset `0x34` as per
OpenTitan spec [1].
[1] https://docs.opentitan.org/hw/ip/spi_host/doc/#Reg_event_enable
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220823061201.132342-5-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch fixes up minor typos in ibex_spi_host
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220823061201.132342-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The maximum supported store block length might be different depending
on whether the instruction is interpretively executed (firmware-reported
maximum) or handled via userspace intercept (host kernel API maximum).
Choose the best available value during group creation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-8-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use the reserved pool of simulated PCI groups to allow intercept
devices to have separate groups from interpreted devices as some group
values may be different. If we run out of simulated PCI groups, subsequent
intercept devices just get the default group.
Furthermore, if we encounter any PCI groups from hostdevs that are marked
as simulated, let's just assign them to the default group to avoid
conflicts between host simulated groups and our own simulated groups.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-7-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lack of MSI-X support is not an issue for interpreted passthrough
devices, so let's let these in. This will allow, for example, ISM
devices to be passed through -- but only when interpretation is
available and being used.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to fully support MSA_EXT_5, we have to support the SHA-512
special instructions. So implement those.
The implementation began as something TweetNacl-like, and then was
adjusted to be useful here. It's not very beautiful, but it is quite
short and compact, which is what we're going for.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ restructure, add missing exception, add comments, fixup CPU model ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220922153820.221811-1-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An abort happens in ohci_frame_boundary() when ohci->done is 0 [1].
``` c
static void ohci_frame_boundary(void *opaque)
{
// ...
if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) {
if (!ohci->done)
abort(); <----------------------------------------- [1]
```
This was reported in https://bugs.launchpad.net/qemu/+bug/1911216/,
https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg03613.html, and
https://gitlab.com/qemu-project/qemu/-/issues/545. I can still reproduce it with
the latest QEMU.
This happends due to crafted ED with putting ISO_TD at physical address 0.
Suppose ed->head & OHCI_DPTR_MASK is 0 [2], and we memset 0 to the phyiscal
memory from 0 to sizeof(ohci_iso_td). Then, starting_frame [3] and frame_count
[4] are both 0. As we can control the value of ohci->frame_number (0 to 0x1f,
suppose 1), we then control the value of relative_frame_number to be 1 [6]. The
control flow goes to [7] where ohci->done is 0. Have returned from
ohci_service_iso_td(), ohci_frame_boundary() will abort() [1].
``` c
static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed)
{
// ...
addr = ed->head & OHCI_DPTR_MASK; // <--------------------- [2]
if (ohci_read_iso_td(ohci, addr, &iso_td)) { // <-------- [3]
// ...
starting_frame = OHCI_BM(iso_td.flags, TD_SF); // <-------- [4]
frame_count = OHCI_BM(iso_td.flags, TD_FC); // <-------- [5]
relative_frame_number = USUB(ohci->frame_number, starting_frame);
// <-------- [6]
if (relative_frame_number < 0) {
return 1;
} else if (relative_frame_number > frame_count) {
// ...
ohci->done = addr; // <-------- [7]
// ...
}
```
As only (afaik) a guest root user can manipulate ED, TD and the physical memory,
this assertion failure is not a security bug.
The idea to fix this issue is to drop ohci_service_iso_td() if ed->head &
OHCI_DPTR_MASK is 0, which is similar to the drop operation for
ohci_service_ed_list() when head is 0. Probably, a similar issue is in
ohci_service_td(). I drop ohci_service_td() if ed->head & OHCI_DPTR_MASK is 0.
Fixes: 7bfe577702 ("OHCI USB isochronous transfers support (Arnon Gilboa)")
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/545
Buglink: https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg03613.html
Buglink: https://bugs.launchpad.net/qemu/+bug/1911216
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220826051557.119570-1-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a guest sets up bad descriptors, it could force QEMU to access
non-existing memory regions. Thus we should check the return value
of dma_memory_read/write() to make sure that these errors don't go
unnoticed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220817160016.49752-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The compiler isn't clever enough to figure 'width' is a constant,
so help it by using a definitions instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-10-peter.maydell@linaro.org
Use autofree heap allocation instead of variable-length array on
the stack. Replace the snprintf() call by g_strdup_printf().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-9-peter.maydell@linaro.org
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-8-peter.maydell@linaro.org
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org
The compiler isn't clever enough to figure 'min_buf_size'
is a constant, so help it by using a definitions instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-6-peter.maydell@linaro.org
The LAN9118 allows the guest to specify a level for both the TX and
RX FIFOs at which an interrupt will be generated. We implement the
RSFL_INT interrupt for the RX FIFO but are missing the handling of
the equivalent TSFL_INT for the TX FIFO. Add the missing test to set
the interrupt if the TX FIFO has exceeded the guest-specified level.
This flag is required for Micrium lan911x ethernet driver to work.
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
[PMM: Tweaked commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status"
causes segmentation fault with following dumpstack:
#1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312
#2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63
#3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128
#4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150
#5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178
#6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421
#7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320
#8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0
#9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297
#10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320
#11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596
#12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734
#13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38
#14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47
Fixes: ebb6207502 ("hw/acpi: Add ACPI Generic Event Device Support")
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For consistency, function "update_rx_fifo()" should use the RX FIFO
register field names, not the TX FIFO ones, even if they refer to the
same bit positions in the register.
Signed-off-by: Anton Kochkov <anton.kochkov@proton.me>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220817141754.2105981-1-anton.kochkov@proton.me
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1123
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
=qT+H
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-09-20:
This queue contains a implementation of PowerISA 3.1B hash insns, ppc
TCG insns cleanups and fixes, and miscellaneus fixes in the spapr and
pnv_phb models.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYyoWlAAKCRA82cqW3gMx
# ZDYhAP0eQMeA4NS3hiw7WMcAVg0pei3ZJL9oEh1UE3+MfK7MhQEA0q8qExWnQJAA
# a0hfnFH9pLjI+v0f/FbFK6QJBpu/bg8=
# =qT+H
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 20 Sep 2022 15:37:56 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220920' of https://gitlab.com/danielhb/qemu:
hw/ppc/spapr: Fix code style problems reported by checkpatch
hw/pci-host: pnv_phb{3, 4}: Fix heap out-of-bound access failure
hw/ppc: spapr: Use qemu_vfree() to free spapr->htab
target/ppc: Clear fpstatus flags on helpers missing it
target/ppc: Zero second doubleword of VSR registers for FPR insns
target/ppc: Set OV32 when OV is set
target/ppc: Zero second doubleword for VSX madd instructions
target/ppc: Set result to QNaN for DENBCD when VXCVI occurs
target/ppc: Zero second doubleword in DFP instructions
target/ppc: Remove unused xer_* macros
target/ppc: Remove extra space from s128 field in ppc_vsr_t
target/ppc: Merge fsqrt and fsqrts helpers
target/ppc: Move fsqrts to decodetree
target/ppc: Move fsqrt to decodetree
target/ppc: Implement hashstp and hashchkp
target/ppc: Implement hashst and hashchk
target/ppc: Add HASHKEYR and HASHPKEYR SPRs
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pnv_phb3_root_bus_info and pnv_phb4_root_bus_info are missing the
instance_size initialization. This results in accessing out-of-bound
memory when setting 'chip-id' and 'phb-id', and eventually crashes
glib's malloc functionality with the following message:
"qemu-system-ppc64: GLib: ../glib-2.72.3/glib/gmem.c:131: failed to allocate 3232 bytes"
This issue was noticed only when running qtests with QEMU Windows
32-bit executable. Windows 64-bit, Linux 32/64-bit do not expose
this bug though.
Fixes: 9ae1329ee2 ("ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge")
Fixes: 4f9924c4d4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220920103159.1865256-29-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
spapr->htab is allocated by qemu_memalign(), hence we should use
qemu_vfree() to free it.
Fixes: c5f54f3e31 ("pseries: Move hash page table allocation to reset time")
Fixes: b4db54132f ("target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL"")
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220920103159.1865256-28-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Cleanup the previous pci information in acpi dsdt table.
And using the common acpi_dsdt_add_gpex function to build
the gpex and pci information.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-10-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add hotplug/unplug interface for memory device.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-9-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In dsdt, acpi ged irq should use gsi number, and the
VIRT_SCI_IRQ means it.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-8-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add RAMFB device to dynamic_sysbus_devices list so that it can be
hotpluged to the machine.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-7-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add hotplug handler for LoongArch virt machine and now only support
the dynamic sysbus device.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-6-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add platform bus support and add the bus information such as address,
size, irq number to FDT table.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-5-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add interrupt information to FDT table, such as interrupt
controller info, compatiable info, etc.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-4-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Support fw_cfg dma function for LoongArch virt machine.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-3-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove the vga device when loongarch machine init and
we will support other display device in the future.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220908094623.73051-2-yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
test_bit uses header->type as an offset; if the file incorrectly specifies a
type greater than 127, smbios_entry_add will read and write garbage.
To fix this, just pass the smbios data through, assuming the user knows what
to do. Reported by Coverity as CID 1487255.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Overwriting "path" in the second call to g_strdup_printf() causes a memory leak,
even if the variable itself is g_autofree.
Reported by Coverity as CID 1460454.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0. This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero. (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)
Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Arm system emulation targets always have TARGET_BIG_ENDIAN clear, so
there is no need to have handling in armv7m_load_kernel() for the
case when it is defined. Remove the unnecessary code.
Side notes:
* our M-profile implementation is always little-endian (that is, it
makes the IMPDEF choice that the read-only AIRCR.ENDIANNESS is 0)
* if we did want to handle big-endian ELF files here we should do it
the way that hw/arm/boot.c:arm_load_elf() does, by looking at the
ELF header to see what endianness the file itself is
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In more recent Raspbian OS Linux kernels, the fb driver gives up
immediately if RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS fails or no
displays are reported.
This change simply always reports one display. It makes bcm2835_fb work
again with these more recent kernels.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Message-Id: <20220812143519.59134-1-Enrik.Berkhan@inka.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cortex A35 core and enable it for virt board.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When running under Xen and the guest reboots, it boots into a new domain
with a new QEMU process (and a new swtpm process if using the emulator
backend). The existing reset function is triggered just before the old
QEMU process exists which causes QEMU to startup the TPM backend and
then immediately shut it down. This is probably harmless but when using
the emulated backend, it wastes CPU and IO time reloading state, etc.
Fix this by calling the reset function directly from realize() when
running under Xen. During a reboot, this will be called by the QEMU
process for the new domain.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220826143841.1515326-1-ross.lagerwall@citrix.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Qemu virt machine can support few cache events and cycle/instret counters.
It also supports counter overflow for these events.
Add a DT node so that OpenSBI/Linux kernel is aware of the virt machine
capabilities. There are some dummy nodes added for testing as well.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221701.41932-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Historically, The mtime/mtimecmp has been part of the CPU because
they are per hart entities. However, they actually belong to aclint
which is a MMIO device.
Move them to the ACLINT device. This also emulates the real hardware
more closely.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220824221357.41070-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The arch review of AIA spec is completed and we now have official
extension names for AIA: Smaia (M-mode AIA CSRs) and Ssaia (S-mode
AIA CSRs).
Refer, section 1.6 of the latest AIA v0.3.1 stable specification at
https://github.com/riscv/riscv-aia/releases/download/0.3.1-draft.32/riscv-interrupts-032.pdf)
Based on above, we update QEMU RISC-V to:
1) Have separate config options for Smaia and Ssaia extensions
which replace RISCV_FEATURE_AIA in CPU features
2) Not generate AIA INTC compatible string in virt machine
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220820042958.377018-1-apatel@ventanamicro.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"platform" is not a valid name for a bus node in dt-schema, so warnings
can be see in dt-validate on a dump of the riscv virt dtb:
/stuff/qemu/qemu.dtb: platform@4000000: $nodename:0: 'platform@4000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
"platform-bus" is a valid name, so use that instead.
CC: Rob Herring <robh@kernel.org>
Fixes: 11d306b9df ("hw/arm/sysbus-fdt: helpers for platform bus nodes addition")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-5-mail@conchuod.ie
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The reset and poweroff features of the syscon were originally added to
top level, which is a valid path for a syscon subnode. Subsequently a
reorganisation was carried out while implementing NUMA in which the
subnodes were moved into the /soc node. As /soc is a "simple-bus", this
path is invalid, and so dt-validate produces the following warnings:
/stuff/qemu/qemu.dtb: soc: poweroff: {'value': [[21845]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-poweroff']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
/stuff/qemu/qemu.dtb: soc: reboot: {'value': [[30583]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-reboot']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
Move the syscon subnodes back to the top level and silence the warnings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220810184612.157317-4-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 18df0b4695 ("hw/riscv: virt: Allow creating multiple NUMA sockets")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"uart" is not a node name that complies with the dt-schema.
Change the node name to "serial" to ix warnings seen during
dt-validate on a dtbdump of the virt machine such as:
/stuff/qemu/qemu.dtb: uart@10000000: $nodename:0: 'uart@10000000' does not match '^serial(@.*)?$'
From schema: /stuff/linux/Documentation/devicetree/bindings/serial/8250.yaml
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-2-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 04331d0b56 ("RISC-V VirtIO Machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220613115810.178210-1-Jason@zx2c4.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
