The only image format driver that even potentially accesses anything
after 512 bytes in its bdrv_probe() implementation is VMDK, which reads
a plain-text descriptor file. In practice, the field it's looking for
seems to come first and will be well within the first 512 bytes, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-7-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Substitute BlockDriverState by BlockBackend in every globally visible
function provided by nbd.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding something like a "delete notifier" to a BlockBackend would not
make much sense, because whoever is interested in registering there will
probably hold a reference to that BlockBackend; therefore, the notifier
will never be called (or only when the notifiee already relinquished its
reference and thus most probably is no longer interested in that
notification).
Therefore, this patch just passes through the close notifier interface
of the root BDS. This will be called when the device is ejected, for
instance, and therefore does make sense.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because all BlockDriverStates behind a single BlockBackend reside in a
single AioContext, it is fine to just pass these functions
(blk_add_aio_context_notifier() and blk_remove_aio_context_notifier())
through to the root BlockDriverState.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are already some blk_aio_* functions, so we might as well have
blk_co_* functions (as far as we need them). This patch adds
blk_co_flush(), blk_co_discard(), and also blk_invalidate_cache() (which
is not a blk_co_* function but is needed nonetheless).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416309679-333-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This returns the node name of a BDS. Remove the TODO comment and expect
the callers to be explicit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to bdrv_next, this traverses through graph_bdrv_states. Will be
useful to enumerate all the named nodes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit 1773d9ee (virtio-net: cleanup: init and exit function)
removed the definition of virtio_net_init(), but didn't remove its
declaration in the header. Clean that up.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commits:
- 6a1fa9f5 (monitor: add del completion for peripheral device)
- 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper)
cause a QEMU crash when trying to use HMP device_del auto-completion.
It can be easily reproduced by:
<qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet
(qemu) device_del
/home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device
Aborted (core dumped)
The root cause is qdev_build_hotpluggable_device_list going recursively over
all peripherals and their children assuming all are devices. It doesn't work
since PCI devices have at least on child which is a memory region (bus master).
Solved by observing that all devices appear as direct children of
/machine/peripheral container. No need of going recursively
over all the children.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reported-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
c/s 9b23cfb76b
or
c/s b154537ad0
moved the testing of xen_enabled() from pc_init1() to
pc_machine_initfn().
xen_enabled() does not return the correct value in
pc_machine_initfn().
Changed vmport from a bool to an enum. Added the value "auto" to do
the old way. Move check of xen_enabled() back to pc_init1().
Acked-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
acpi build modifies internal FW CFG RAM on first access
but we forgot to mark it dirty.
If this RAM has been migrated already, it won't be
migrated again, returning corrupted tables to guest.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Performance wise it's better to align GVA by the backend's
page size.
Also do not allow to create DIMM device with suboptimal
size (i.e. not aligned to backends page size) to aviod
memory loss.
Do above only for 2.2 and newer machine types to avoid
breaking working configs with 2.1 machine type.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
introduce memory_region_get_alignment() that returns
underlying memory block alignment or 0 if it's not
relevant/implemented for backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running in KVM mode, kvm_set_phys_mem() will silently
fail if registered MemoryRegion address/size is not page
aligned. Causing memory hotplug failure in guest.
Mapping non aligned MemoryRegion in TCG mode 'works', but
sane guest OS still expects page aligned memory module
and fails to initialize it if it's not aligned.
So do not allow non aligned (i.e. valid) address/size
values for DIMM to avoid either KVM failure or guest
issues caused by it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When more memory devices are used than available
KVM memory slots, QEMU crashes with:
kvm_alloc_slot: no free slot available
Aborted (core dumped)
Fix this by checking that KVM has a free slot before
attempting to map memory in guest address space.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code in invalidate_and_set_dirty() needs to handle addr/length
combinations which cross guest physical page boundaries. This can happen,
for example, when disk I/O reads large blocks into guest RAM which previously
held code that we have cached translations for. Unfortunately we were only
checking the clean/dirty status of the first page in the range, and then
were calling a tb_invalidate function which only handles ranges that don't
cross page boundaries. Fix the function to deal with multipage ranges.
The symptoms of this bug were that guest code would misbehave (eg segfault),
in particular after a guest reboot but potentially any time the guest
reused a page of its physical RAM for new code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416167061-13203-1-git-send-email-peter.maydell@linaro.org
patches, pending confirmation from the submitter that they really
fix QNX.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUZMqiAAoJEL/70l94x66DQEEH/3kWZSwiC6yh5icRmLd1PX9Q
P8a5qIGQUldN54orlr4bDs4Slb6w4CVwwupT6AIFvNbZDFQVlJTMd+3ssZ03H++D
eJ9WvY3yVmrC1ofFk1WNIposk01gvM0U74Kns4ttEuJ7UyB75mhPEegQd3B8WbPa
/eJILlXu9ayxj60yEqmoR8IfqrkuuTHx7P4QmpJigGeLkBhQOq0TXjb1xi+4JPnv
BHjVjA6YNtzuMO2wP0y6KE/9HZpow0luAb+vB0NkY0NoEezVucoDWLMMUkpSiZI/
yYFEqp4lzRo2ygnJXlGvLFND6F2qacGIIU5lj5t8a2BmswqD83JEt/idQGYeIzM=
=ExeA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
x86 and SCSI fixes. I left out the APIC device model
patches, pending confirmation from the submitter that they really
fix QNX.
# gpg: Signature made Thu 13 Nov 2014 15:13:38 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
acpi: accurate overflow check
smbios: change 'ram_addr_t' variables to 'uint64_t'
kvmclock: Add comment explaining why we need cpu_clean_all_dirty()
target-i386: fix Coverity complaints about overflows
apic_common: migrate missing fields
target-i386: eliminate dead code and hoist common code out of "if"
virtio-scsi: Fix comment for VirtIOSCSIReq
virtio-scsi: dataplane: suppress guest notification
esp: Do not overwrite ESP_TCHI after reset
virtio-scsi: dataplane: fix allocation for 'cmd_vrings'
esp: fix coding standards
virtio-scsi: work around bug in old BIOSes
esp-pci: fixup deadlock with linux
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cdb is not zeroed by virtio_scsi_init_req, so fix the misleading
comment.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After a reset ESP_TCHI should contain the unique ID
of the chip. This value will be overwritten with the
current tranfer count if the transfer count has
previously been set.
So we should always return the chip id if ESP_TCHI
has never been written to.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
=klsW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It returns more information than binary, fix the comment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When do memory hotplug, if there is numa node, we should add
the memory size to the corresponding node memory size.
It affects the result of hmp command "info numa".
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need to support spawning of sysbus devices dynamically via the command line.
The easiest way to represent these dynamically spawned devices in the guest's
memory and IRQ layout is by preallocating some space for dynamic sysbus devices.
This is what the "platform bus" device does. It is a sysbus device that exports
a configurably sized MMIO region and a configurable number of IRQ lines. When
this device encounters sysbus devices that have been dynamically created and not
manually wired up, it dynamically connects them to its own pool of resources.
The machine model can then loop through all of these devices and create a guest
configuration (device tree) to make them visible to the guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices have a range of MMIO regions they expose. The exact number
of regions is device specific and internal information to the device model.
Expose whether a region exists via a public interface. That way our platform
bus enumeration code can dynamically determine how many regions exist.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can get their IRQ lines connected to other devices. It is
possible to figure out which IRQ line a connection is on and whether a sysbus
device even provides an IRQ connector at a specific offset.
This patch exposes helpers to make this information publicly accessible. We
will need it for the platform bus dynamic sysbus enumeration.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly map sysbus devices that haven't been connected to
something forcefully by C code, we can allow the -device command line option
to spawn them.
For machines that don't implement dynamic sysbus assignment in their board
files we add a new bool "has_dynamic_sysbus" to the machine class.
When that property is false (default), we bail out when we see dynamically
spawned sysbus devices, like we did before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Sysbus devices can be spawned by C code or dynamically via the command line.
In the latter case, we need to be able to find the dynamically created devices
to do things with them.
This patch adds a search helper that makes it easy to look for dynamically
spawned sysbus devices.
Signed-off-by: Alexander Graf <agraf@suse.de>
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV65JAAoJECgfDbjSjVRpqzgIAJJDaU95xdtl/snSJVbSGsgR
2YW8mC8pjkZnV8fbu7F1vOTJSpAhj0eeXaDTqtbBhgAqBlqQ5tWAT9xDnUIlBlHN
GVTWzWaifVOGMj087Ovvy9+4NyfsuvTlf3aOjvLfqlaDqI5dbZQAyIdHNFyV7Qy9
txgAcERp+caZ4rN8XgAv82KV1JGj8PXermTgLJ+DcqYxhwWm66eEviQ+f+F5YImJ
CJQ6HFPXjclxHCuyKBL334SIwq8IfYyUUkIsGgKCNuHPUud7r2rqsIlRfeZBwLf9
igUgf4iPQL5TNVq9qwQmnTK6ddHTqHZmGyu902WxHK/N0EDq4dLw8diqFhZxo9Y=
=f7Rb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows machine classes to specify which display device they want
as default. If unspecified the current behavior (try cirrus, failing
that try stdvga, failing that use no display) will be used.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUVhuDAAoJEL7lnXSkw9fbOKMIAIE3XZMhar4Vmokb/K0DFbnh
gy2z7iCe7vumLKiRSJX1LGmkFO3dwykw82JZQ1SVo0RdgguJ5dx1Abx1qDM1rojL
jJT0pJ9zWPl4fTv38wCEfaysQHPdgwoH4826ga+MXnVS9XHRHHxuQ4vI01AK3oyQ
4t6/wto9H8kF3n6ny7tz5WNZClsq7qbiIqw5nNCILQfSh/VBPwxQNBiWf/nYVMuY
Ubk5noztZwH+hbiAQL5lAPz/HolcRwg1tzbR0dfmt8/aqO28rJhasG58JgtziI2y
JSg4BwldqUQEgiHonArLfQDixjLtEEyL+fQSzZm02ixwcBpc/ADSyGDy2R1zpH8=
=j1ga
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-02' into staging
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
megasas 2108 emulation, and other small patches here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUU8RCAAoJEL/70l94x66Dvh0H/3CMdRSk9UugaHxn+VeSqGdz
Z5KQpvUqZts03hISrFATOG9XZGTnsxuVtzGuR+kpW4luQXd4x4dv/pFIiS43FWNr
hGKckxLsSYLM57eh5pUbRfoIAYwa+txe/PnCa1GGSyrEbBe6isF39LrZnkCEJWNc
yEF4nIwTJqAAkvqgXv6SWzINr9vKUYHlGG2a6I2pSM3pofL3Pe8dr5Lg2rXCU3QS
Petn3Xj45oKhQGX9mBrfFQR9xeJ/Uq1chF5GpIYWPqpeSFmHd7A6gW+cpGMN+RlT
OG8JnOwWBxQ26ZOjS6Ek52RiDCr4fsEWmbrwYRYz1D5hi9jSnpOYxipj1kSOG5k=
=479x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
The last round of patches for soft freeze. Includes ivshmem bugfixes,
megasas 2108 emulation, and other small patches here and there.
# gpg: Signature made Fri 31 Oct 2014 17:17:54 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (35 commits)
virtio-scsi: fix dataplane
ivshmem: use error_report
ivshmem: Fix fd leak on error
ivshmem: Fix potential OOB r/w access
ivshmem: validate incoming_posn value from server
ivshmem: Check ivshmem_read() size argument
i386: fix breakpoints handling in icount mode
kvm_stat: Add powerpc support
kvm_stat: Abstract ioctl numbers
kvm_stat: Rework platform detection
kvm_stat: Fix the non-x86 exit reasons
kvm_stat: Only consider online cpus
virtio-scsi: Fix num_queue input validation
scsi: devirtualize unrealize of SCSI devices
virtio-scsi: Fix memory leak when realize failed
iscsi: Refuse to open as writable if the LUN is write protected
kvmvapic: patch_instruction fix
vl.c: Fix Coverity complaining for vmstate_dump_file
Add skip_dump flag to ignore memory region during dump
-machine vmport=off: Allow disabling of VMWare ioport emulation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New MIPS features depend on the access type and enum is more convenient than
using the numbers directly.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Now that op blockers are in use, we can ensure that no other sources are
generating I/O on a BlockDriverState. Therefore it is possible to drain
requests for a single BDS.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-7-git-send-email-stefanha@redhat.com
Block jobs will run in the BlockDriverState's AioContext, which may not
always be the QEMU main loop.
There are some block layer APIs that are either not thread-safe or risk
lock ordering problems. This includes bdrv_unref(), bdrv_close(), and
anything that calls bdrv_drain_all().
The block_job_defer_to_main_loop() API allows a block job to schedule a
function to run in the main loop with the BlockDriverState AioContext
held.
This function will be used to perform cleanup and backing chain
manipulations in block jobs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-6-git-send-email-stefanha@redhat.com
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a block job signals readiness, this is currently reported only
through QMP. If qemu wants to use block jobs for internal tasks, there
needs to be another way to correctly detect when a block job may be
completed.
For this reason, introduce a bool "ready" which is set when the block
job may be completed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement block_job_complete_sync() by doing the exact same thing as
block_job_cancel_sync() does, only with calling block_job_complete()
instead of block_job_cancel().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
at least in block layer we have the case of limits being defined for a
BlockDriverState. However, in this context often zero (0) has the special
meanining of undefined which means no limit. If two of those limits are
combined and the minimum is needed the minimum function should only return
zero if both parameters are zero.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Differently from older versions, SMBIOS version 2.6 is explicit about
the encoding of UUID fields:
> Although RFC 4122 recommends network byte order for all fields, the PC
> industry (including the ACPI, UEFI, and Microsoft specifications) has
> consistently used little-endian byte encoding for the first three fields:
> time_low, time_mid, time_hi_and_version. The same encoding, also known as
> wire format, should also be used for the SMBIOS representation of the UUID.
>
> The UUID {00112233-4455-6677-8899-AABBCCDDEEFF} would thus be represented
> as 33 22 11 00 55 44 77 66 88 99 AA BB CC DD EE FF.
The dmidecode tool implements this and decodes the above "wire format"
when SMBIOS version >= 2.6. We moved from SMBIOS version 2.4 to 2.8 when
we started building the SMBIOS entry point inside QEMU, on commit
c97294ec1b.
Change smbios_build_type_1_table() to encode the UUID as specified.
To make sure we won't change the guest-visible UUID when upgrading to a
newer QEMU version, keep the old behavior on pc-*-2.1 and older.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Rename:
AcpiCpuHotplug_init --> acpi_cpu_hotplug_init
AcpiCpuHotplug_ops --> acpi_cpu_hotplug_ops
for better readability, just cleanup.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Remove the unused CPU hot-plug notifier.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Update rtc_cmos in pc_cpu_plug() directly, instead of the notifier.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Convert notifier based hotplug to hotplug_handler API,
and remove the unused AcpiCpuHotplug_add().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Convert notifier based hotplug to hotplug_handler API.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add cpu hotplug callback function (acpi_cpu_plug_cb) to match hotplug_handler API.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
(((sid) >> 8) && 0xff) makes no sense
(((sid) >> 8) & 0xff) seems to be what was meant.
https://bugs.launchpad.net/qemu/+bug/1382477
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current support for bus master (clearing OK bit) together with the need to
support guests which do not enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust in case of cross-version
migration for the case when guests use the device before setting DRIVER_OK.
Rip out this code, and replace it:
- Modern QEMU doesn't need VIRTIO_PCI_FLAG_BUS_MASTER_BUG
so just drop it for latest machine type.
- For compat machine types, set PCI_COMMAND if DRIVER_OK
is set.
As this is needed for 2.1 for both pc and ppc, move PC_COMPAT macros from pc.h
to a new common header.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Commit 261747f1 ("vl: Use MachineClass instead of global QEMUMachine
list") broke the ordering of the machine types in the user-visible output
of
qemu-system-XXXX -M \?
This occurred because registration was rebased from a manually maintained
linked list to GLib hash tables:
qemu_register_machine()
type_register()
type_register_internal()
type_table_add()
g_hash_table_insert()
and because the listing was rebased accordingly, from the traversal of the
list to the traversal of the hash table (rendered as an ad-hoc list):
machine_parse()
object_class_get_list(TYPE_MACHINE)
object_class_foreach()
g_hash_table_foreach()
The current order is a "random" one, for practical purposes, which is
annoying for users.
Introduce new members QEMUMachine.family and MachineClass.family, allowing
machine types to be "clustered". Introduce a comparator function that
establishes a total ordering between machine types, ordering machine types
in the same family next to each other. In machine_parse(), list the
supported machine types sorted with the comparator function.
The comparator function:
- sorts whole families before standalone machine types,
- sorts whole families between each other in alphabetically increasing
order,
- sorts machine types inside the same family in alphabetically decreasing
order,
- sorts standalone machine types between each other in alphabetically
increasing order.
After this patch, all machine types are considered standalone, and
accordingly, the output is alphabetically ascending. This will be refined
in the following patches.
Effects on the x86_64 output:
Before:
> Supported machines are:
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> isapc ISA-only PC
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> none empty machine
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
After:
> Supported machines are:
> isapc ISA-only PC
> none empty machine
> pc-0.10 Standard PC (i440FX + PIIX, 1996)
> pc-0.11 Standard PC (i440FX + PIIX, 1996)
> pc-0.12 Standard PC (i440FX + PIIX, 1996)
> pc-0.13 Standard PC (i440FX + PIIX, 1996)
> pc-0.14 Standard PC (i440FX + PIIX, 1996)
> pc-0.15 Standard PC (i440FX + PIIX, 1996)
> pc-1.0 Standard PC (i440FX + PIIX, 1996)
> pc-1.1 Standard PC (i440FX + PIIX, 1996)
> pc-1.2 Standard PC (i440FX + PIIX, 1996)
> pc-1.3 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.4 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.5 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.6 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-1.7 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.0 Standard PC (i440FX + PIIX, 1996)
> pc-i440fx-2.1 Standard PC (i440FX + PIIX, 1996)
> pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.2)
> pc-i440fx-2.2 Standard PC (i440FX + PIIX, 1996) (default)
> pc-q35-1.4 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.5 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.6 Standard PC (Q35 + ICH9, 2009)
> pc-q35-1.7 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.0 Standard PC (Q35 + ICH9, 2009)
> pc-q35-2.1 Standard PC (Q35 + ICH9, 2009)
> q35 Standard PC (Q35 + ICH9, 2009) (alias of pc-q35-2.2)
> pc-q35-2.2 Standard PC (Q35 + ICH9, 2009)
Effects on the aarch64 output:
Before:
> Supported machines are:
> lm3s811evb Stellaris LM3S811EVB
> canon-a1100 Canon PowerShot A1100 IS
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> connex Gumstix Connex (PXA255)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> lm3s6965evb Stellaris LM3S6965EVB
> versatileab ARM Versatile/AB (ARM926EJ-S)
> borzoi Borzoi PDA (PXA270)
> tosa Tosa PDA (PXA255)
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> midway Calxeda Midway (ECX-2000)
> mainstone Mainstone II (PXA27x)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> terrier Terrier PDA (PXA270)
> highbank Calxeda Highbank (ECX-1000)
> cubieboard cubietech cubieboard
> sx1-v1 Siemens SX1 (OMAP310) V1
> sx1 Siemens SX1 (OMAP310) V2
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> akita Akita PDA (PXA270)
> z2 Zipit Z2 (PXA27x)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> spitz Spitz PDA (PXA270)
> none empty machine
> virt ARM Virtual Machine
> collie Collie PDA (SA-1110)
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> verdex Gumstix Verdex (PXA270)
> nuri Samsung NURI board (Exynos4210)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
After:
> Supported machines are:
> akita Akita PDA (PXA270)
> borzoi Borzoi PDA (PXA270)
> canon-a1100 Canon PowerShot A1100 IS
> cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310)
> collie Collie PDA (SA-1110)
> connex Gumstix Connex (PXA255)
> cubieboard cubietech cubieboard
> highbank Calxeda Highbank (ECX-1000)
> integratorcp ARM Integrator/CP (ARM926EJ-S)
> kzm ARM KZM Emulation Baseboard (ARM1136)
> lm3s6965evb Stellaris LM3S6965EVB
> lm3s811evb Stellaris LM3S811EVB
> mainstone Mainstone II (PXA27x)
> midway Calxeda Midway (ECX-2000)
> musicpal Marvell 88w8618 / MusicPal (ARM926EJ-S)
> n800 Nokia N800 tablet aka. RX-34 (OMAP2420)
> n810 Nokia N810 tablet aka. RX-44 (OMAP2420)
> none empty machine
> nuri Samsung NURI board (Exynos4210)
> realview-eb ARM RealView Emulation Baseboard (ARM926EJ-S)
> realview-eb-mpcore ARM RealView Emulation Baseboard (ARM11MPCore)
> realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
> realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
> smdkc210 Samsung SMDKC210 board (Exynos4210)
> spitz Spitz PDA (PXA270)
> sx1 Siemens SX1 (OMAP310) V2
> sx1-v1 Siemens SX1 (OMAP310) V1
> terrier Terrier PDA (PXA270)
> tosa Tosa PDA (PXA255)
> verdex Gumstix Verdex (PXA270)
> versatileab ARM Versatile/AB (ARM926EJ-S)
> versatilepb ARM Versatile/PB (ARM926EJ-S)
> vexpress-a15 ARM Versatile Express for Cortex-A15
> vexpress-a9 ARM Versatile Express for Cortex-A9
> virt ARM Virtual Machine
> xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
> z2 Zipit Z2 (PXA27x)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1145042
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
In case of -daemonize, we write non-zero to the daemon
pipe only if pidfile creation failed, so the parent will
report error about pidfile problem. There's no need to
make special case for this, since all other errors are
reported by the child just fine. Let the parent report
error and simplify logic in os_daemonize().
This way, we don't need os_pidfile_error() function, since
it only prints error now, so put the error reporting printf
into the only place where qemu_create_pidfile() is called,
in vl.c.
While at it, fix wrong indentation in os_daemonize().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This will avoid unexpected circular header dependencies in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The PCI MMIO might be disabled or the device in the reset state.
Make sure we do not dump these memory regions.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The EFI firmware doesn't handle unit attentions properly,
so we need to clear the Power On/Reset unit attention upon
initial reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 2108 chip supports MSI and MSI-X, so update the emulation
to support both chips.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Make VMStateDescription const. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_cdb_length() does not return the length of the cdb, but
the transfersize encoded in the cdb. So rename it to scsi_cdb_xfer()
and also rename all other related functions to end with _xfer.
We can then add a new scsi_cdb_length() which actually does return the
length of the cdb. With that DEBUG_SCSI can now display the correct
CDB buffer.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/sstabellini/xen-2014-10-30:
fix off-by-one error in pci_piix3_xen_ide_unplug
xen-hvm.c: Add support for Xen access to vmport
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds synchronisation of the 6 vcpu registers (only 32bits of
them) that vmport.c needs between Xen and QEMU.
This is to avoid a 2nd and 3rd exchange between QEMU and Xen to
fetch and put these 6 vcpu registers used by the code in vmport.c
and vmmouse.c
The registers are passed in the new shared page provided by
HVM_PARAM_VMPORT_REGS_PFN.
Add new array to XenIOState that allows selection of current_cpu by
vcpu id.
Now pass XenIOState to handle_ioreq().
Add new routines regs_to_cpu(), regs_from_cpu(), and
handle_vmport_ioreq().
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
MAINTAINERS updates, and AVX512 support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUTmDNAAoJEL/70l94x66DPb0IAKKhf8IRfQZPEQgOWD2YeANd
vwAZ4JcqAl2/dbeOTrs5TXOWdoNVXUFDmeHh4zsgUB7poxsOqZ/M7N844UGR5duC
f4fKYXAkjyqocKH7dbpf/S+YuJtU40qowI02HQeEmGpZaJUjmfMAFwrguqerdMaB
pGA79948XeoAjP8jNgf1EqCqLi31GBEfiU2q05xLKxd+M0xSFIM7IM2hGZfFv7Hq
bbE2CGuCyj4NST/GH2C/22QBz9MyqFaL2prtDqoMugAHTKE7vO/rpFti9oTDRCXa
x8U/JcBf/puBNI+Kq+cdxTJicwIuqrcBkNmjP9sLv/nJ37QwEG06VDCd4Xj9mEs=
=zXqD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
virtio-scsi fixes, the first part of dynamic sysbus devices,
MAINTAINERS updates, and AVX512 support.
# gpg: Signature made Mon 27 Oct 2014 15:12:13 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (28 commits)
aio / timers: De-document -clock
hw/scsi/virtio-scsi.c: fix the "type" use error in virtio_scsi_handle_ctrl
virtio-scsi: sense in virtio_scsi_command_complete
target-i386: add Intel AVX-512 support
get_maintainer.pl: restrict cases where it falls back to --git
get_maintainer.pl: move git loop under "if ($email) {"
qtest: fix qtest log fd should be initialized before qtest chardev
MAINTAINERS: avoid M entries that point to mailing lists
MAINTAINERS: add some tests directories
MAINTAINERS: Add more TCG files
MAINTAINERS: add myself for X86
MAINTAINERS: add Samuel Thibault as usb-serial.c and baum.c maintainer
MAINTAINERS: grab more files from Anthony's pile
target-i386: warns users when CPU threads>1 for non-Intel CPUs
sysbus: Use TYPE_DEVICE GPIO functionality
qdev: gpio: Define qdev_pass_gpios()
qdev: gpio: Remove qdev_init_gpio_out x1 restriction
qdev: gpio: delete NamedGPIOList::out
irq: Remove qemu_irq_intercept_out
qtest/irq: Rework IRQ interception
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remove pointless 'info pcmcia' and a lot of now-dead code
* register ARM cpu reset handlers even if not using -kernel
* update to libvixl 1.6
* various minor code cleanups
* support PSCI under TCG ('virt' machine can now be shut down,
SMP configurations work)
* correct the sense of the AArch64 DCZID DZP bit
* report a valid L1Ip field in CTR_EL0 for CPU type "any"
* correctly UNDEF writes to FPINST/FPINST2 from EL0
* more preparatory code refactoring for EL2/EL3 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uBin
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141024' into staging
target-arm queue:
* remove pointless 'info pcmcia' and a lot of now-dead code
* register ARM cpu reset handlers even if not using -kernel
* update to libvixl 1.6
* various minor code cleanups
* support PSCI under TCG ('virt' machine can now be shut down,
SMP configurations work)
* correct the sense of the AArch64 DCZID DZP bit
* report a valid L1Ip field in CTR_EL0 for CPU type "any"
* correctly UNDEF writes to FPINST/FPINST2 from EL0
* more preparatory code refactoring for EL2/EL3 support
# gpg: Signature made Fri 24 Oct 2014 12:35:52 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141024: (23 commits)
target-arm: A32: Emulate the SMC instruction
target-arm: make arm_current_el() return EL3
target-arm: rename arm_current_pl to arm_current_el
target-arm: reject switching to monitor mode
target-arm: add arm_is_secure() function
target-arm: increase arrays of registers R13 & R14
target-arm: correctly UNDEF writes to FPINST/FPINST2 from EL0
target-arm: Report a valid L1Ip field in CTR_EL0 for CPU type "any"
target-arm: Correct sense of the DCZID DZP bit
arm/virt: enable PSCI emulation support for system emulation
target-arm: add emulation of PSCI calls for system emulation
target-arm: Add support for A32 and T32 HVC and SMC insns
target-arm: Handle SMC/HVC undef-if-no-ELx in pre_* helpers
target-arm: add missing PSCI constants needed for PSCI emulation
target-arm: do not set do_interrupt handlers for ARM and AArch64 user modes
target-arm: add powered off cpu state
omap_gpmc.c: Remove duplicate assignment
disas/libvixl/a64/instructions-a64.h: Remove unused constants
arm_gic: remove unused parameter.
disas/libvixl: Update to libvixl 1.6
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This command lists PCMCIA sockets and cards. Only a few ARM boards
have sockets (akita, borzoi, connex, mainstone, spitz, terrier, tosa,
verdex, z2), the only card is the DSCM-1xxxx Hitachi Microdrive (qdev
"microdrive"), and it is only inserted during machine init, if ever.
So this command doesn't really tell anybody anything new so far.
Moreover, pcmcia_socket_unregister() has a use-after-free bug, flagged
by Coverity. Has never been used, because there has never been code
to eject a PCMCIA card.
Not worth fixing & converting to QMP. Remove it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1411144812-22958-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=TMKO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Thu 23 Oct 2014 18:56:05 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (32 commits)
qemu-img: Print error if check failed
block: char devices on FreeBSD are not behind a pager
iotests: Add test for qcow2 L1 table update
qcow2: Do not overflow when writing an L1 sector
iotests: Add test for map commands
qemu-io: Respect early image end for map
block: Respect underlying file's EOF
docs/qcow2: Limit refcount_order to [0, 6]
docs/qcow2: Correct refcount_block_entries
qcow2: Drop REFCOUNT_SHIFT
iotests: Add test for potentially damaging repairs
iotests: Fix test outputs
qcow2: Clean up after refcount rebuild
qcow2: Rebuild refcount structure during check
qcow2: Do not perform potentially damaging repairs
qcow2: Fix refcount blocks beyond image end
qcow2: Reuse refcount table in calculate_refcounts()
qcow2: Let inc_refcounts() resize the reftable
qcow2: Let inc_refcounts() return -errno
qcow2: Split fail code in L1 and L2 checks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Re-implement the Sysbus GPIOs to use the existing TYPE_DEVICE
GPIO named framework. A constant string name is chosen to avoid
conflicts with existing unnamed GPIOs.
This unifies GPIOs are IRQs for sysbus devices and allows removal
of all Sysbus state for GPIOs.
Any existing and future-added functionality for GPIOs is now
also available for sysbus IRQs.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allows a container to take ownership of GPIOs in a contained
device and automatically connect them as GPIOs to the container.
This prepares for deprecation of the SYSBUS IRQ functionality, which
has this feature. We push it up to the device level instead of sysbus
level. There's nothing sysbus specific about passing GPIOs to
containers so its a legitimate device-level generic feature.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All users of GPIO outputs are fully QOMified, using QOM properties to
access the GPIO data. Delete.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No more users left and obsoleted by qdev_intercept_gpio_out.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To replace the old qemu_irq intercept API (which had users reaching
into qdev private state for GPIOs).
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no use to constantly trying to enable dataplane if we failed
to set up guest or host notifiers, so fence it off in that case.
We'll try again if the device is reinitialized.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need this to protect dataplane thread from race conditions with block
jobs until the latter is made dataplane-safe.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions call their non-0-counterparts and then fill the
allocated buffer with 0 (if the allocation has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For peripheral device del completion, add a function to build a list for
hotpluggable devices.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=8BaC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Mon 20 Oct 2014 13:04:09 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make device model's references to BlockBackend strong
block: Lift device model API into BlockBackend
blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackend
block/qapi: Convert qmp_query_block() to BlockBackend
blockdev: Fix blockdev-add not to create DriveInfo
blockdev: Drop superfluous DriveInfo member id
pc87312: Drop unused members of PC87312State
ide: Complete conversion from BlockDriverState to BlockBackend
hw: Convert from BlockDriverState to BlockBackend, mostly
virtio-blk: Rename VirtIOBlkConf variables to conf
virtio-blk: Drop redundant VirtIOBlock member conf
block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
block: Rename BlockDriverAIOCB* to BlockAIOCB*
block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
block: Merge BlockBackend and BlockDriverState name spaces
block: Eliminate BlockDriverState member device_name[]
block: Eliminate bdrv_iterate(), use bdrv_next()
blockdev: Eliminate drive_del()
block: Make BlockBackend own its BlockDriverState
block: Code motion to get rid of stubs/blockdev.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move device model attachment / detachment and the BlockDevOps device
model callbacks and their wrappers from BlockDriverState to
BlockBackend.
Wrapper calls in block.c change from
bdrv_dev_FOO_cb(bs, ...)
to
if (bs->blk) {
bdrv_dev_FOO_cb(bs->blk, ...);
}
No change, because both bdrv_dev_change_media_cb() and
bdrv_dev_resize_cb() do nothing when no device model is attached, and
a device model can be attached only when bs->blk.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Much more command code needs conversion. I start with this one
because it's using bdrv_dev_* functions, which I'm about to lift into
BlockBackend.
While there, give bdrv_query_info() internal linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in. qmp_blockdev_add() leaves it blank. This results in a drive
with type = IF_IDE, bus = 0, unit = 0. Screwed up in commit ee13ed1c.
Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives. The QMP command has to execute really early to
be visible. Not sure how likely that is in practice.
Fix by creating DriveInfo in drive_new(). Block backends created by
blockdev-add don't get one.
Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false. Simply
test !dinfo instead.
Leaves DriveInfo member enable_auto_del unused. Drop it.
A few places assume a block backend always has a DriveInfo. Fix them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is consistent with how VirtIOFOOConf variables are named
elsewhere, and makes blk available for BlockBackend variables.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 12c5674 turned it into a pointer to member blk.conf.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockBackend's name space is separate only to keep the initial patches
simple. Time to merge the two.
Retain bdrv_find() and bdrv_get_device_name() for now, to keep this
series manageable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields(). The latter is used only to undo damage
done by bdrv_swap(). The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa. Furthermore,
blk_new_with_bs() keeps the two names equal.
Therefore, device_name[] is redundant. Eliminate it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_del() has become a trivial wrapper around blk_unref(). Get rid
of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make the BlockBackend own the DriveInfo. Change blockdev_init() to
return the BlockBackend instead of the DriveInfo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convenience function blk_new_with_bs() creates a BlockBackend with its
BlockDriverState. Callers have to unref both. The commit after next
will relieve them of the need to unref the BlockDriverState.
Complication: due to the silly way drive_del works, we need a way to
hide a BlockBackend, just like bdrv_make_anon(). To emphasize its
"special" status, give the function a suitably off-putting name:
blk_hide_on_behalf_of_do_drive_del(). Unfortunately, hiding turns the
BlockBackend's name into the empty string. Can't avoid that without
breaking the blk->bs->device_name equals blk->name invariant.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A block device consists of a frontend device model and a backend.
A block backend has a tree of block drivers doing the actual work.
The tree is managed by the block layer.
We currently use a single abstraction BlockDriverState both for tree
nodes and the backend as a whole. Drawbacks:
* Its API includes both stuff that makes sense only at the block
backend level (root of the tree) and stuff that's only for use
within the block layer. This makes the API bigger and more complex
than necessary. Moreover, it's not obvious which interfaces are
meant for device models, and which really aren't.
* Since device models keep a reference to their backend, the backend
object can't just be destroyed. But for media change, we need to
replace the tree. Our solution is to make the BlockDriverState
generic, with actual driver state in a separate object, pointed to
by member opaque. That lets us replace the tree by deinitializing
and reinitializing its root. This special need of the root makes
the data structure awkward everywhere in the tree.
The general plan is to separate the APIs into "block backend", for use
by device models, monitor and whatever other code dealing with block
backends, and "block driver", for use by the block layer and whatever
other code (if any) dealing with trees and tree nodes.
Code dealing with block backends, device models in particular, should
become completely oblivious of BlockDriverState. This should let us
clean up both APIs, and the tree data structures.
This commit is a first step. It creates a minimal "block backend"
API: type BlockBackend and functions to create, destroy and find them.
BlockBackend objects are created and destroyed exactly when root
BlockDriverState objects are created and destroyed. "Root" in the
sense of "in bdrv_states". They're not yet used for anything; that'll
come shortly.
A root BlockDriverState is created with bdrv_new_root(), so where to
create a BlockBackend is obvious. Where these roots get destroyed
isn't always as obvious.
It is obvious in qemu-img.c, qemu-io.c and qemu-nbd.c, and in error
paths of blockdev_init(), blk_connect(). That leaves destruction of
objects successfully created by blockdev_init() and blk_connect().
blockdev_init() is used only by drive_new() and qmp_blockdev_add().
Objects created by the latter are currently indestructible (see commit
48f364d "blockdev: Refuse to drive_del something added with
blockdev-add" and commit 2d246f0 "blockdev: Introduce
DriveInfo.enable_auto_del"). Objects created by the former get
destroyed by drive_del().
Objects created by blk_connect() get destroyed by blk_disconnect().
BlockBackend is reference-counted. Its reference count never exceeds
one so far, but that's going to change.
In drive_del(), the BB's reference count is surely one now. The BDS's
reference count is greater than one when something else is holding a
reference, such as a block job. In this case, the BB is destroyed
right away, but the BDS lives on until all extra references get
dropped.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an anonymous BDS can't fail. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes compilation errors when building against glib < 2.16.0
due to the missing g_strcmp0() function.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1413457177-10132-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
by making bootindex a writable qom property.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJUPjeVAAoJEEy22O7T6HE4j5QP/RtecYdC9yiOGsGcI4lrDMo8
5j61JzvY7bpPGJykXH7c8B9s3n2LQIW4rzD5mDVB/bKXPwh3SbqPBQmd1T6G7lrR
4lV+c/pvrTDE9V1k0Favbe0pbfOkaBAnMyYEYFkoK7hzVUTN6acbkz0LhXudb4ci
7V9wbSLnZZrTxB50NTJu17EIa7RCDKQR6urskrxAsJeqCAT7NQtXM5ls1dfGvHQs
Tc6u4+zRqv2Rzr9YxkFKPZe55rTBMUw3fcwg9F3657dCujYvcMq8+ZwFGiMXSjll
oUFxwgZn05aRQwxG1YfFDI576+f9ZCirkQBoDBwgp3ZSLTN8CLVDZ0X1FA7vjntH
fr5j7D0M2ftSsUDI2E3UOzaNtbtyQaCkggl+zc0fgw7dEfbitqpUZQQ4wGngBTKJ
BFkky+29MhBTLqBC38S9iUGqUbHbrqIHP/hSW8ixAGm4n8dul+ROgX4ynFZNOuxE
NEA1rRspDHNVanb+gcpK0wv58vvmwbECGrovkI7ffeCo+8+MDW3ebRbQ2fIxUa4C
KbPp6b5vICVcsG0+XRbjA2rNn76iJYCjc+PX1WQX6vgPYEPRah51G44KLyN/r8kj
fw7wOuYomtu+2nymH/8QXBEyACiuCJLTmOykHxsrYURR3VvVeg2Z0j4e7fNOg/Is
+d+cVKKkN8JLFRlXG8qu
=utUi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-bootindex-20141015-1' into staging
allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.
* remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits)
bootindex: change fprintf to error_report
bootindex: delete bootindex when device is removed
bootindex: move calling add_boot_device_patch to bootindex setter function
ide: add calling add_boot_device_patch in bootindex setter function
nvma: ide: add bootindex to qom property
usb-storage: add bootindex to qom property
virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390
block: remove bootindex property from qdev to qom
virtio-blk: add bootindex to qom property
ide: add bootindex to qom property
scsi: add bootindex to qom property
isa-fdc: remove bootindexA/B property from qdev to qom
redirect: remove bootindex property from qdev to qom
vfio: remove bootindex property from qdev to qom
pci-assign: remove bootindex property from qdev to qom
host-libusb: remove bootindex property from qdev to qom
virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390
net: remove bootindex property from qdev to qom
usb-net: add bootindex to qom property
vmxnet3: add bootindex to qom property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes compilation errors when building against glib <2.28.0
due to the missing g_get_monotonic_time() function.
The compilation error in tests/libqos/virtio.c was introduced in commit
70556264a8 ("libqos: use microseconds
instead of iterations for virtio timeout").
Add a simple g_get_monotonic_time() implementation to glib-compat.h
based on code from vhost-user-test.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Igor: add G_TIME_SPAN_SECOND, include glib-compat.h in libqtest.h]
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a qemu extented register range to the standard vga mmio bar.
Right nowe there are two registers: One readonly register returning the
size of the region (so we can easily add more registers there if needed)
and one endian control register, so guests (especially ppc) can flip
the framebuffer endianness as they need it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
when we remove bootindex form qdev.property to qom.property,
we can use those functions set/get bootindex property for all
correlative devices. Meanwhile set the initial value of
bootindex to -1.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We must assure that the changed bootindex can take effect
when guest is rebooted. So we introduce fw_cfg_machine_reset(),
which change the fw_cfg file's bootindex data using the new
global fw_boot_order list.
Signed-off-by: Chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce del_boot_device_path() to clean up fw_cfg content when
hot-unplugging a device that refers to a bootindex or update a
existent devcie's bootindex.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Chenliang <chenliang88@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Determine whether a given bootindex exists or not.
If exists, we report an error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The legacy_name is useless now, better help
information is provided by description field of property.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The descriptions can serve as documentation in the code,
and they can be used to provide better help.
Copy property descriptions when copying alias properties.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The descriptions can serve as documentation in the code,
and they can be used to provide better help.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It removes not needed anymore BusState::allow_hotplug field and
DeviceClass::unplug callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
SCSI subsytem was converted to hotplug handler API and
doesn't use SCSIBusInfo{hotplug, hot_unplug} fields and
related callbacks anymore.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used for conversion of SCSI and USB devices,
and would allow to make every HBA/USB host switch
to HotplugHandler API without touching each controller
explicitly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It will be used in shallow conversion from legacy hotplug
mechanism and eventually replace all the uses of old mechanism
DeviceClass::unplug = qdev_simple_unplug_cb()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is to be called for actual device removal and
will allow to separate request and removal handling
phases of x86-CPU devices and also it's a handler
to be called for synchronously removable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It would allow to transparently switch detection whether Bus
is hotpluggable from allow_hotplug field to hotplug_handler
link and to drop allow_hotplug field once all users are
converted to hotplug handler API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add abs argument to the existing softfloat minmax() function and define
new float{32,64}_{min,max}nummag functions.
minnummag(x,y) returns x if |x| < |y|,
returns y if |y| < |x|,
otherwise minnum(x,y)
maxnummag(x,y) returns x if |x| > |y|,
returns y if |y| > |x|,
otherwise maxnum(x,y)
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The QEMUFileStdio code will use qemu_file_is_writable() and will be
moved to a separate file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This extends use of VMS_ALLOC flag from arrays to VBUFFER as well.
This defines VMSTATE_VBUFFER_ALLOC_UINT32 which makes use of VMS_ALLOC
and uses uint32_t type for a size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is based on Stefan and Joel's patch that creates a QEMUFile that goes
to a memory buffer; from:
http://lists.gnu.org/archive/html/qemu-devel/2013-03/msg05036.html
Using the QEMUFile interface, this patch adds support functions for
operating on in-memory sized buffers that can be written to or read from.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
For fixes/tweeks I've done:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUNo9yAAoJEBRUblpOawnXQDkH/1M5DxmVwUv+SZtHEdpsT7Eq
UGjRzfYXsYP/WkEqxVzYJmN0HJn9z8uJZin/dqwDPQLjCy8gf/xuaNCfoZqMuxHw
iNaTgKpi9Uy0G0VWxjlZpRu8f5JjqHbJEP6aTT0hooBHaqQoBSm1fQh/pnCUvnpB
qDQeHcOjrzIMkQJ3Ji8z2s+CapHaiIa63hJqRJztS5vbonPjngjj87dA54eIqDtQ
RwXy58y+C8YMKqfpOG6lA+RxogESyyCfDBVUA1wwRDad1mOFKUMtEd4jAL39HUgR
qINSKybG12V2bx8E+vNbaKB+68+NLdxcyR39JR2aun+a8yw+yDcF5BBiMXlqV0U=
=4bqy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Four changes here. Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.
# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (28 commits)
qemu-char: Fix reconnect socket error reporting
qemu-sockets: Add error to non-blocking connect handler
qemu-error: Add error_vreport()
virtio-scsi: fix use-after-free of VirtIOSCSIReq
linuxboot: compute initrd loading address
kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
accel: Create accel object when initializing machine
accel: Pass MachineState object to accel init functions
accel: Rename 'init' method to 'init_machine'
accel: Move accel init/allowed code to separate function
accel: Remove tcg_available() function
accel: Move qtest accel registration to qtest.c
accel: Move Xen registration code to xen-common.c
accel: Move KVM accel registration to kvm-all.c
accel: Report unknown accelerator as "not found" instead of "does not exist"
accel: Make AccelClass.available() optional
accel: Use QOM classes for accel types
accel: Move accel name lookup to separate function
accel: Simplify configure_accelerator() using AccelType *acc variable
accel: Create AccelType typedef
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create an actual TYPE_ACCEL object when initializing a machine. This
will allow accelerator classes to implement some initialization on
instance_init, and to save state on the TYPE_ACCEL object.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initial base address is miscalculated in walk_memory_regions().
It has to be shifted TARGET_PAGE_BITS more. Holder variables are
extended to target_ulong size otherwise they don't fit for MIPS N32
(a 32-bit ABI with a 64-bit address space) and qemu won't compile.
The issue led to incorrect debug output of memory maps and a
mis-formed coredumped file.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
GDB assumes that watchpoint set via the gdbstub remote protocol will
behave in the same way as hardware watchpoints for the target. In
particular, whether the CPU stops with the PC before or after the insn
which triggers the watchpoint is target dependent. Allow guest CPU
code to specify which behaviour to use. This fixes a bug where with
guest CPUs which stop before the accessing insn GDB would manually
step forward over what it thought was the insn and end up one insn
further forward than it should be.
We set this flag for the CPU architectures which set
gdbarch_have_nonsteppable_watchpoint in gdb 7.7:
ARM, CRIS, LM32, MIPS and Xtensa.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Michael Walle <michael@walle.cc> (for lm32)
Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org
Today, all accelerator init functions affect some global state:
* tcg_init() calls tcg_exec_init() and affects globals such as tcg_tcx,
page size globals, and possibly others;
* kvm_init() changes the kvm_state global, cpu_interrupt_handler, and possibly
others;
* xen_init() changes the xen_xc global, and registers a change state handler.
With the new accelerator QOM classes, initialization may now be split in two
steps:
* instance_init() will do basic initialization that doesn't affect any global
state and don't need MachineState or MachineClass data. This will allow
probing code to safely create multiple accelerator objects on the fly just
for reporting host/accelerator capabilities, for example.
* accel_init_machine()/init_machine() will save the accelerator object in
MachineState, and do initialization steps which still affect global state,
machine state, or that need data from MachineClass or MachineState.
To clarify the difference between those two steps, rename init() to
init_machine().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the function always return 1, it is not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As qtest_availble() returns 1 only when CONFIG_POSIX is set, keep
setting AccelClass.available to keep current behavior (this is different
from what we did for KVM and Xen).
This also allows us to make qtest_init_accel() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that this has an user-visible side-effect: instead of reporting
"Xen is not supported for this target", QEMU binaries not supporting Xen
will report "xen accelerator does not exist".
As xen_available() always return 1 when CONFIG_XEN is enabled, we don't
need to set AccelClass.available anymore. xen_enabled() is not being
removed yet, but only because vl.c is still using it.
This also allows us to make xen_init() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that this has an user-visible side-effect: instead of reporting
"KVM is not supported for this target", QEMU binaries not supporting KVM
will report "kvm accelerator does not exist".
As kvm_availble() always return 1 when CONFIG_KVM is enabled, we don't
need to set AccelClass.available anymore. kvm_enabled() is not being
completely removed yet only because qmp_query_kvm() still uses it.
This also allows us to make kvm_init() static.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of having a static AccelType array, register a class for each
accelerator type, and use class name lookup to find accelerator
information.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IDs have long spread beyond QemuOpts: not everything with an ID
necessarily goes through QemuOpts. Commit 9aebf3b is about such a
case: block layer names are meant to be well-formed IDs, but some of
them don't go through QemuOpts, and thus weren't checked. The commit
fixed that the straightforward way: rename the internal QemuOpts
helper id_wellformed() to qemu_opts_id_wellformed() and give it
external linkage.
Instead of using it directly in block.c, the commit adds wrapper
bdrv_is_valid_name(), probably to hide the connection to QemuOpts.
Go one logical step further: emancipate IDs from QemuOpts. Rename the
function back to id_wellformed(), and put it in another file. While
there, clean up its value to bool. Peel off the bdrv_is_valid_name()
wrapper.
[Replaced stray return 0 with return false to match bool returns used
elsewhere in id_wellformed().
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the 'units_per_default_bus' property which
allows individual boards to declare their desired
index => (bus,unit) mapping for their default HBA, so that
boards such as Q35 can specify that its default if_ide HBA,
AHCI, only accepts one unit per bus.
This property only overrides the mapping for drives matching
the block_default_type interface.
This patch also adds this property to *all* past and present
Q35 machine types. This retroactive addition is justified
because the previous erroneous index=>(bus,unit) mappings
caused by lack of such a property were not utilized due to
lack of initialization code in the Q35 init routine.
Further, semantically, the Q35 board type has always had the
property that its default HBA, AHCI, only accepts one unit per
bus. The new code added to add devices to drives relies upon
the accuracy of this mapping. Thus, the property is applied
retroactively to reduce complexity of allowing IDE HBAs with
different units per bus.
Examples:
Prior to this patch, all IDE HBAs were assumed to use 2 units
per bus (Master, Slave). When using Q35 and AHCI, however, we
only allow one unit per bus.
-hdb foo.qcow2 would become index=1, or bus=0,unit=1.
-hdd foo.qcow2 would become index=3, or bus=1,unit=1.
-drive file=foo.qcow2,index=5 becomes bus=2,unit=1.
These are invalid for AHCI. They now become, under Q35 only:
-hdb foo.qcow2 --> index=1, bus=1, unit=0.
-hdd foo.qcow2 --> index=3, bus=3, unit=0.
-drive file=foo.qcow2,index=5 --> bus=5,unit=0.
The mapping is adjusted based on the fact that the default IF
for the Q35 machine type is IF_IDE, and units-per-default-bus
overrides the IDE mapping from its default of 2 units per bus
to just 1 unit per bus.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
