Host kernel within [4.18, 5.3] report an erroneous KVM_MAX_VCPUS=512
for ARM. The actual capability to instantiate more than 256 vcpus
was fixed in 5.4 with the upgrade of the KVM_IRQ_LINE ABI to support
vcpu id encoded on 12 bits instead of 8 and a redistributor consuming
a single KVM IO device instead of 2.
So let's check this capability when attempting to use more than 256
vcpus within any ARM kvm accelerated machine.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-id: 20191003154640.22451-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Host kernels that expose the KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 capability
allow injection of interrupts along with vcpu ids larger than 255.
Let's encode the vpcu id on 12 bits according to the upgraded KVM_IRQ_LINE
ABI when needed.
Given that we have two callsites that need to assemble
the value for kvm_set_irq(), a new helper routine, kvm_arm_set_irq
is introduced.
Without that patch qemu exits with "kvm_set_irq: Invalid argument"
message.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-id: 20191003154640.22451-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MVCL is interruptible and we should check for interrupts and process
them after writing back the variables to the registers. Let's check
for any exit requests and exit to the main loop. Introduce a new helper
function for that: cpu_loop_exit_requested().
When booting Fedora 30, I can see a handful of these exits and it seems
to work reliable. Also, Richard explained why this works correctly even
when MVCL is called via EXECUTE:
(1) TB with EXECUTE runs, at address Ae
- env->psw_addr stored with Ae.
- helper_ex() runs, memory address Am computed
from D2a(X2a,B2a) or from psw.addr+RI2.
- env->ex_value stored with memory value modified by R1a
(2) TB of executee runs,
- env->ex_value stored with 0.
- helper_mvcl() runs, using and updating R1b, R1b+1, R2b, R2b+1.
(3a) helper_mvcl() completes,
- TB of executee continues, psw.addr += ilen.
- Next instruction is the one following EXECUTE.
(3b) helper_mvcl() exits to main loop,
- cpu_loop_exit_restore() unwinds psw.addr = Ae.
- Next instruction is the EXECUTE itself...
- goto 1.
As the PoP mentiones that an interruptible instruction called via EXECUTE
should avoid modifying storage/registers that are used by EXECUTE itself,
it is fine to retrigger EXECUTE.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This setting is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-19-richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
All but one caller passes ILEN_UNWIND, which is not stored.
For the one use case in s390_cpu_tlb_fill, set int_pgm_ilen
directly, simply to avoid the assert within do_program_interrupt.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-18-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The single caller passes ILEN_UNWIND; pass that along to
trigger_pgm_exception directly.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-17-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This setting is no longer used.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-16-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
For TCG, we will always call s390_cpu_virt_mem_handle_exc,
which will go through the unwinder to set ILEN. For KVM,
we do not go through do_program_interrupt, so this argument
is unused.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-15-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We currently set ilen to AUTO, then overwrite that during
unwinding, then overwrite that for the code access case.
This can be simplified to setting ilen to our arbitrary
value for the (undefined) code access case, then rely on
unwinding to overwrite that with the correct value for
the data access case.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-14-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We currently call trigger_pgm_exception to set cs->exception_index
and env->int_pgm_code and then read the values back and then
reset cs->exception_index so that the exception is not delivered.
Instead, use the exception type that we already have directly
without ever triggering an exception that must be suppressed.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-13-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Now that excp always contains a real exception number, we can
use that instead of a separate fail variable. This allows a
redundant test to be removed.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-12-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Do not raise the exception directly within translate_pages,
but pass it back so that caller may do so.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-11-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Do not raise the exception directly within mmu_translate,
but pass it back so that caller may do so.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-10-richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Now that mmu_translate_asce returns the exception instead of
raising it, the argument is unused.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-9-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Do not raise the exception directly within mmu_translate_real,
but pass it back so that caller may do so.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-8-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As a step toward moving all excption handling out of mmu_translate,
copy handling of the LowCore tec value from trigger_access_exception
into s390_cpu_tlb_fill. So far this new plumbing isn't used.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-7-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Delay triggering an exception until the end, after we have
determined ultimate success or failure, and also taken into
account whether this is a non-faulting probe.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-6-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace all uses of s390_program_interrupt within files
that are marked CONFIG_TCG. These are necessarily tcg-only.
This lets each of these users benefit from the QEMU_NORETURN
attribute on tcg_s390_program_interrupt.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-5-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This is no longer used, and many of the existing uses -- particularly
within hw/s390x -- seem questionable.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-4-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Since we begin the operation with an unwind, we have the proper
value of ilen immediately available.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-3-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Use ILEN_UNWIND to signal that we have in fact that cpu_restore_state
will have been called by the time we arrive in do_program_interrupt.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20191001171614.8405-2-richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We now implement a bunch of new facilities we can properly indicate.
ESOP-1/ESOP-2 handling is discussed in the PoP Chafter 3-15
("Suppression on Protection"). The "Basic suppression-on-protection (SOP)
facility" is a core part of z/Architecture without a facility
indication. ESOP-2 is indicated by ESOP-1 + Side-effect facility
("ESOP-2"). Besides ESOP-2, the side-effect facility is only relevant for
the guarded-storage facility (we don't implement).
S390_ESOP:
- We indicate DAT exeptions by setting bit 61 of the TEID (TEC) to 1 and
bit 60 to zero. We don't trigger ALCP exceptions yet. Also, we set
bit 0-51 and bit 62/63 to the right values.
S390_ACCESS_EXCEPTION_FS_INDICATION:
- The TEID (TEC) properly indicates in bit 52/53 on any access if it was
a fetch or a store
S390_SIDE_EFFECT_ACCESS_ESOP2:
- We have no side-effect accesses (esp., we don't implement the
guarded-storage faciliy), we correctly set bit 64 of the TEID (TEC) to
0 (no side-effect).
- ESOP2: We properly set bit 56, 60, 61 in the TEID (TEC) to indicate the
type of protection. We don't trigger KCP/ALCP exceptions yet.
S390_INSTRUCTION_EXEC_PROT:
- The MMU properly detects and indicates the exception on instruction fetches
- Protected TLB entries will never get PAGE_EXEC set.
There is no need to fake the abscence of any of the facilities - without
the facilities, some bits of the TEID (TEC) are simply unpredictable.
As IEP was added with z14 and we currently implement a z13, add it to
the MAX model instead.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Setup the 4.1 compatibility model so we can add new features to the
LATEST model.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
IEP support in the mmu is fairly easy. Set the right permissions for TLB
entries and properly report an exception.
Make sure to handle EDAT-2 by setting bit 56/60/61 of the TEID (TEC) to
the right values.
Let's keep s390_cpu_get_phys_page_debug() working even if IEP is
active. Switch MMU_DATA_LOAD - this has no other effects any more as the
ASC to be used is now fully selected outside of mmu_translate().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We already implement ESOP-1. For ESOP-2, we only have to indicate all
protection exceptions properly. Due to EDAT-1, we already indicate DAT
exceptions properly. We don't trigger KCP/ALCP/IEP exceptions yet.
So all we have to do is set the TEID (TEC) to the right values
(bit 56, 60, 61) in case of LAP.
We don't have any side-effects (e.g., no guarded-storage facility),
therefore, bit 64 of the TEID (TEC) is always 0.
We always have to indicate whether it is a fetch or a store for all access
exceptions. This is only missing for LAP exceptions.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
This only adds basic support to the DAT translation, but no EDAT2 support
for TCG. E.g., the gdbstub under kvm uses this function, too, to
translate virtual addresses.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
A non-recursive implementation allows to make better use of the
branch predictor, avoids function calls, and makes the implementation of
new features only for a subset of region table levels easier.
We can now directly compare our implementation to the KVM gaccess
implementation in arch/s390/kvm/gaccess.c:guest_translate().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's use consistent names for the region/section/page table entries and
for the macros to extract relevant parts from virtual address. Make them
match the definitions in the PoP - e.g., how the relevant bits are actually
called.
Introduce defines for all bits declared in the PoP. This will come in
handy in follow-up patches.
Add a note where additional information about s390x and the used
definitions can be found.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
While ASCE_ORIGIN is not wrong, it is certainly confusing. We want a
page frame address.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's document how it works and inject PGM_ADDRESSING if reading of
table entries fails.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's return the PGM from the translation functions on error and inject
based on that.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We'll reuse the ilen and tec definitions in mmu_translate
soon also for all other DAT exceptions we inject. Move it to the caller,
where we can later pair it up with other protection checks, like IEP.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's get it out of the way to make some further refactorings easier.
Personally, I've never used these debug statements at all. And if I had
to debug issues, I used plain GDB instead (debug prints are just way too
much noise in the MMU). We might want to introduce tracing at some point
instead, so we can able selected events on demand.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
-----BEGIN PGP SIGNATURE-----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=PXXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191004' into staging
ppc patch queue 2019-10-04
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
# gpg: Signature made Fri 04 Oct 2019 10:35:57 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20191004: (53 commits)
ppc/pnv: Remove the XICSFabric Interface from the POWER9 machine
spapr: Eliminate SpaprIrq::init hook
spapr: Add return value to spapr_irq_check()
spapr: Use less cryptic representation of which irq backends are supported
xive: Improve irq claim/free path
spapr, xics, xive: Better use of assert()s on irq claim/free paths
spapr: Handle freeing of multiple irqs in frontend only
spapr: Remove unhelpful tracepoints from spapr_irq_free_xics()
spapr: Eliminate SpaprIrq:get_nodename method
spapr: Simplify spapr_qirq() handling
spapr: Fix indexing of XICS irqs
spapr: Eliminate nr_irqs parameter to SpaprIrq::init
spapr: Clarify and fix handling of nr_irqs
spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helper
spapr: Fold spapr_phb_lsi_qirq() into its single caller
xics: Create sPAPR specific ICS subtype
xics: Merge TYPE_ICS_BASE and TYPE_ICS_SIMPLE classes
xics: Eliminate reset hook
xics: Rename misleading ics_simple_*() functions
xics: Eliminate 'reject', 'resend' and 'eoi' class hooks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When I run QEMU with KVM under Valgrind, I currently get this warning:
Syscall param ioctl(generic) points to uninitialised byte(s)
at 0x95BA45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x429DC3: kvm_ioctl (kvm-all.c:2365)
by 0x51B249: kvm_arch_get_supported_msr_feature (kvm.c:469)
by 0x4C2A49: x86_cpu_get_supported_feature_word (cpu.c:3765)
by 0x4C4116: x86_cpu_expand_features (cpu.c:5065)
by 0x4C7F8D: x86_cpu_realizefn (cpu.c:5242)
by 0x5961F3: device_set_realized (qdev.c:835)
by 0x7038F6: property_set_bool (object.c:2080)
by 0x707EFE: object_property_set_qobject (qom-qobject.c:26)
by 0x705814: object_property_set_bool (object.c:1338)
by 0x498435: pc_new_cpu (pc.c:1549)
by 0x49C67D: pc_cpus_init (pc.c:1681)
Address 0x1ffeffee74 is on thread 1's stack
in frame #2, created by kvm_arch_get_supported_msr_feature (kvm.c:445)
It's harmless, but a little bit annoying, so silence it by properly
initializing the whole structure with zeroes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some secondary controls are automatically enabled/disabled based on the CPUID
values that are set for the guest. However, they are still available at a
global level and therefore should be present when KVM_GET_MSRS is sent to
/dev/kvm.
Unfortunately KVM forgot to include those, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add code to convert the VMX feature words back into MSR values,
allowing the user to enable/disable VMX features as they wish. The same
infrastructure enables support for limiting VMX features in named
CPU models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These will be used to compile the list of VMX features for named
CPU models, and/or by the code that sets up the VMX MSRs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMX requires 64-bit feature words for the IA32_VMX_EPT_VPID_CAP
and IA32_VMX_BASIC MSRs. (The VMX control MSRs are 64-bit wide but
actually have only 32 bits of information).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes a CPU feature does not make sense unless another is
present. In the case of VMX features, KVM does not even allow
setting the VMX controls to some invalid combinations.
Therefore, this patch adds a generic mechanism that looks for bits
that the user explicitly cleared, and uses them to remove other bits
from the expanded CPU definition. If these dependent bits were also
explicitly *set* by the user, this will be a warning for "-cpu check"
and an error for "-cpu enforce". If not, then the dependent bits are
cleared silently, for convenience.
With VMX features, this will be used so that for example
"-cpu host,-rdrand" will also hide support for RDRAND exiting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patch will add a different reason for filtering features, unrelated
to host feature support. Extract a new function that takes care of disabling
the features and optionally reporting them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a problem, that you don't have access to the data using cpu_memory_rw_debug() function when in SMM. You can't remotely debug SMM mode program because of that for example.
Likely attrs version of get_phys_page_debug should be used to get correct asidx at the end to handle access properly.
Here the patch to fix it.
Signed-off-by: Dmitry Poletaev <poletaev@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUID bits CLZERO and XSAVEERPTR are availble on AMD's ZEN platform
and could be passed to the guest.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows us to remove more endian-specific defines from int_helper.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190926204453.31837-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Now that the parameters to both set_dfp64() and set_dfp128() are exactly the
same, there is no need for an explicit if() statement to determine which
function should be called based upon size. Instead we can simply use the
preprocessor to generate the call to set_dfp##size() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch over all accesses to the decimal numbers held in struct PPC_DFP from
using HI_IDX and LO_IDX to using the VsrD() macro instead. Not only does this
allow the compiler to ensure that the various dfp_* functions are being passed
a ppc_vsr_t rather than an arbitrary uint64_t pointer, but also allows the
host endian-specific HI_IDX and LO_IDX to be completely removed from
dfp_helper.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several places in dfp_helper.c that access the decimal number
representations in struct PPC_DFP via HI_IDX and LO_IDX defines which are set
at the top of dfp_helper.c according to the host endian.
However we can instead switch to using ppc_vsr_t for decimal numbers and then
make subsequent use of the existing VsrD() macros to access the correct
element regardless of host endian. Note that 64-bit decimals are stored in the
LSB of ppc_vsr_t (equivalent to VsrD(1)).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Most of the DFP helper functions call decimal{64,128}FromNumber() just before
returning in order to convert the decNumber stored in dfp.t64 back to a
Decimal{64,128} to write back to the FP registers.
Introduce new dfp_finalize_decimal{64,128}() helper functions which both enable
the parameter list to be reduced considerably, and also help minimise the
changes required in the next patch.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit ef96e3ae96 "target/ppc: move FP and VMX registers into aligned vsr
register array" FP registers are no longer stored consecutively in memory and so
the current method of combining FP register pairs into DFP numbers is incorrect.
Firstly update the definition of the dh_*_fprp defines in helper.h to reflect
that FP registers are now stored as part of an array of ppc_vsr_t elements
rather than plain uint64_t elements, and then introduce a new ppc_fprp_t type
which conceptually represents a DFP even-odd register pair to be consumed by the
DFP helper functions.
Finally update the new DFP {get,set}_dfp{64,128}() helper functions to convert
between DFP numbers and DFP even-odd register pairs correctly, making use of the
existing VsrD() macro to access the correct elements regardless of host endian.
Fixes: ef96e3ae96 "target/ppc: move FP and VMX registers into aligned vsr register array"
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190926185801.11176-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
