the new field will be used by boards to get access to main
RAM memory region and will help to save boiler plate in
boards which often introduce a field or variable just for
this purpose.
Memory region will be equivalent to what currently used
memory_region_allocate_system_memory() is returning apart
from that it will come from hostmem backend.
Followup patches will incrementally switch boards to using
RAM from MachineState::ram.
Patch takes care of non-NUMA case and follow up patch will
initialize MachineState::ram for NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-5-imammedo@redhat.com>
Allow machine to opt in for hostmem backend based initial RAM
even if user uses old -mem-path/prealloc options by providing
MachineClass::default_ram_id
Follow up patches will incrementally convert machines to new API,
by dropping memory_region_allocate_system_memory() and setting
default_ram_id that board used to use before conversion to keep
migration stream the same.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-4-imammedo@redhat.com>
Property will contain link to memory backend that will be
used for backing initial RAM.
Follow up commit will alias -mem-path and -mem-prealloc
CLI options into memory backend options to make memory
handling consistent (using only hostmem backend family
for guest RAM allocation).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-3-imammedo@redhat.com>
it has been deprecated since 4.0 by commit
cb79224b7 (deprecate -mem-path fallback to anonymous RAM)
Deprecation period ran out and it's time to remove it
so it won't get in a way of switching to using hostmem
backend for RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-2-imammedo@redhat.com>
Supporting a build platform beyond its end of life makes no sense.
Spell that out just to be clear.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213084335.15100-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
monitor/misc.c contains code that works only in the system emulator, so
it can't be linked to tools like a storage daemon. In order to make
schema introspection available for tools, move the function to
monitor/qmp-cmds-control.c, which can be linked into the storage daemon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-5-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move all of the QMP commands handlers to implement the 'control' module
(qapi/control.json) that can be shared between the system emulator and
tools such as a storage daemon to a new file monitor/qmp-cmds-control.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-4-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Both the system emulators and tools with QMP support (specifically, the
planned storage daemon) will need to parse monitor options, so move that
code to monitor/monitor.c, which can be linked into binaries that aren't
a system emulator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-2-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently, there is no usage of TARGET_NR_syscall_count for target
xtensa, and there is no obvious indication if there is some planned
usage in future.
CC: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-10-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update microblaze syscall numbers based on Linux kernel v5.5.
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-5-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update arm syscall numbers based on Linux kernel v5.5.
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----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=UwrK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-02-15' into staging
QAPI patches for 2020-02-15
# gpg: Signature made Sat 15 Feb 2020 10:44:28 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-02-15:
qapi: Delete all the "foo: dropped in n.n" notes
qapi/migration.json: Replace _this_ with *this*
qapi: Add blank lines before bulleted lists
qapi: Use explicit bulleted lists
qapi/ui.json: Avoid `...' Texinfo style quoting
qapi/ui.json: Put input-send-event body text in the right place
qapi: Remove hardcoded tabs
qapi: Fix indent level on doc comments in json files
qapi: Fix incorrect "Not documented" claims in QMP documentation
qapi/block-core.json: Use literal block for ascii art
qga/qapi-schema.json: minor format fixups for rST
qga/qapi-schema.json: Fix indent level on doc comments
qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
Makefile: Fix typo in dependency list for interop manpages
configure: Check that sphinx-build is using Python 3
configure: Pick sphinx-build-3 when available
configure: Allow user to specify sphinx-build binary
qapi: Expand documentation for LostTickPolicy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A handful of QAPI doc comments include lines like
"ppcemb: dropped in 3.1". The doc comment parser will just
put these into whatever the preceding section was; sometimes
that's "Notes", and sometimes it's some random other section,
as with "NetClientDriver" where the "'dump': dropped in 2.12"
line ends up in the "Since:" section.
This tends to render wrongly, more so in the upcoming rST
generator, but sometimes even in the Texinfo, as in the case
of QKeyCode:
ac_bookmarks
since 2.10 altgr, altgr_r: dropped in 2.10
Since commit 3264ffced3 (v4.2.0), we have a better place to tell
users about deprecated and deleted functionality --
qemu-deprecated.texi. These "dropped in" remarks all predate it, and
other feature drops of that vintage are not documented anywhere, so
moving these to qemu-deprecated.texi makes little sense. Drop them
instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-19-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The MigrationInfo::setup-time documentation is the only place where we
use _this_ inline markup for emphasis, commonly rendered in italics.
We would like to switch the doc comments to rST format, but rST
doesn't recognize that markup and emits literal underscores.
Switch to *this* instead. Changes markup to strong emphasis with
Texinfo, commonly rendered as bold. With rST, it will go right back
to emphasis / italics.
rST also uses **this** for strong (commonly rendered bold) where
Texinfo uses *this*. We have one place in the doc comments
which uses strong/bold markup, in qapi/introspect.json:
Note: the QAPI schema is also used to help define *internal*
When we switch to rST that will be rendered as emphasis / italics.
Markus (who wrote that) thinks that using emphasis / italics
there is an improvement, so we leave that markup alone.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to switch the doc comments to rST format. rST
insists on a blank line before and after a bulleted list, but our
Texinfo doc generator did not. Add some extra blank lines in the doc
comments so they're acceptable rST input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org>
[Three commits squashed into one]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid Texinfo style quoting with `...', because we would like to
switch the doc comments to rST format, and rST treats it as a syntax
error. Use '...' instead, as we do in other doc comments. This looks
OK in Texinfo, and rST formats it as paired-quotation-marks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-13-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In the doc comment for input-send-event, there is a multi-line
chunk of text ("The @device...take precedence") which is intended
to be the main body text describing the event. However it has
been placed after the arguments and Returns: section, which
means that the parser actually thinks that this text is
part of the "Returns" section text.
Move the body text up to the top so that the parser correctly
classifies it as body.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-12-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are some stray hardcoded tabs in some of our json files;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-11-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.
Make the doc comments more strongly consistent about indentation
for multiline constructs like:
@arg: description line 1
description line 2
Returns: line one
line 2
so that there is always exactly one space after the colon, and
subsequent lines align with the first.
This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace). This does mean that we end up with some
over-length lines.
Note that when the documentation for an argument fits on a single
line like this:
@arg: one line only
then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some qapi doc comments have forgotten the ':' after the
@argument, like this:
# @filename Filename for the new image file
# @size Size of the virtual disk in bytes
The result is that these are parsed as part of the body
text and appear as a run-on line:
filename Filename for the new image file size Size of the virtual disk in bytes"
followed by
filename: string
Not documented
size: int
Not documented
in the 'Members' section.
Correct the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-9-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The ascii-art graph in the BlockLatencyHistogramInfo documentation
doesn't render correctly, because the whitespace is collapsed.
Use the '|' format that emits a literal 'example' block so the graph
is displayed correctly.
Strictly the Texinfo generated is still wrong because each line
goes into its own @example environment, but it renders better
than what we had before.
Fixing this rendering is a necessary prerequisite for the upcoming rST
generator, which otherwise complains about the inconsistent
indentation in the ascii-art graph.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-8-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to switch the doc comments to rST format, and rST
requires a blank line before the start of a bulleted or enumerated
list. Two places in qapi-schema.json were missing this blank line.
Some places were using an indented line as a sort of single-item
bulleted list, which in the Texinfo output comes out all run
onto a single line; use a real bulleted list instead.
Some places unnecessarily indented lists, which confuses rST.
guest-fstrim:minimum's documentation was indented the
right amount to share a line with @minimum, but wasn't
actually doing so.
The indent on the bulleted list in the guest-set-vcpus
Returns section meant rST misindented it.
Changes to the generated Texinfo are very minor (the new
bulleted lists, and a few extra blank lines).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-7-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current doc generation doesn't care much about indentation levels,
but we would like to switch to an rST format, and rST does care about
indentation.
Make the doc comments more strongly consistent about indentation
for multiline constructs like:
@arg: description line 1
description line 2
Returns: line one
line 2
so that there is always exactly one space after the colon, and
subsequent lines align with the first.
This commit is a purely whitespace change, and it does not alter the
generated .texi files (because the texi generation code strips away
all the extra whitespace). This does mean that we end up with some
over-length lines.
Note that when the documentation for an argument fits on a single
line like this:
@arg: one line only
then stray extra spaces after the ':' don't affect the rST output, so
I have not attempted to methodically fix them, though the preference
is a single space here too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-6-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The doc comment for GuestDiskBusType doesn't match up with the
enumeration because of a missing hyphen in 'file-backed-virtual'.
This means the docs are rendered wrongly:
"virtual"
Win virtual bus type "file-backed" virtual: Win file-backed bus type
"file-backed-virtual"
Not documented
Add the missing hyphen.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-5-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix a typo in the dependency list for the manpages built from the
'interop' manual, which meant we were accidentally not including
the .hx file in the dependency list.
Fixes: e13c59fa44
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-4-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently configure's has_sphinx_build() check simply runs a dummy
sphinx-build and either passes or fails. This means that "no
sphinx-build at all" and "sphinx-build exists but is too old" are
both reported the same way.
Further, we want to assume that all the Python we write is running
with at least Python 3.5; configure checks that for our scripts, but
Sphinx extensions run with whatever Python version sphinx-build
itself is using.
Add a check to our conf.py which makes sphinx-build fail if it would
be running our extensions with an old Python, and handle this
in configure so we can report failure helpfully to the user.
This will mean that configure --enable-docs will fail like this
if the sphinx-build provided is not suitable:
Warning: sphinx-build exists but it is either too old or uses too old a Python version
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx
(As usual, the default is to simply not build the docs, as we would
if sphinx-build wasn't present at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-3-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will require a sphinx-build that uses Python 3. On
some systems, sphinx-build is fine, on others you need to use
sphinx-build-3. To keep things working out of the box on both kinds
of systems, try sphinx-build-3, then sphinx-build.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <87a75lqe8e.fsf@dusky.pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
-----BEGIN PGP SIGNATURE-----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=D4dQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we insist on using 'sphinx-build' from the $PATH;
allow the user to specify the binary to use. This will be
more useful as we become pickier about the capabilities
we require (eg needing a Python 3 sphinx-build).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-2-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current documentation is fairly terse and not easy to decode
for someone who's not intimately familiar with the inner workings
of timer devices. Expand on it by providing a somewhat verbose
description of what behavior each policy will result in, as seen
from both the guest OS and host point of view.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20200211183744.210298-1-abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
-----BEGIN PGP SIGNATURE-----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=Mspo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200213' into staging
target-arm queue:
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
# gpg: Signature made Thu 13 Feb 2020 14:40:34 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200213: (46 commits)
target/arm: Implement ARMv8.1-VMID16 extension
hw/arm/raspi: Extract the cores count from the board revision
hw/arm/raspi: Use a unique raspi_machine_class_init() method
hw/arm/raspi: Extract the board model from the board revision
hw/arm/raspi: Set default RAM size to size encoded in board revision
hw/arm/raspi: Let class_init() directly call raspi_machine_init()
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
hw/arm/raspi: Make machines children of abstract RaspiMachineClass
hw/arm/raspi: Trivial code movement
hw/arm/raspi: Extract the processor type from the board revision
hw/arm/raspi: Extract the RAM size from the board revision
hw/arm/raspi: Extract the version from the board revision
hw/arm/raspi: Correct the board descriptions
hw/arm/raspi: Use BCM2708 machine type with pre Device Tree kernels
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
hw/arm: ast2600: Wire up EHCI controllers
hw/arm: ast2400/ast2500: Wire up EHCI controllers
target/arm: Enable ARMv8.2-UAO in -cpu max
target/arm: Implement UAO semantics
target/arm: Update MSR access to UAO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for tcg helpers with 7 arguments.
Add support for gvec helpers with 5 arguments.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl5Elo4dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+QHQgAiUHK3gZZZc6t4M7C
YRGYNHSN4A3LV1NrsYXWkcZgjiWJPclmf7oSQmsLGRKlolQvbRiEPK6VZ4LppwUo
XDK66T1NrfFexu0sS93PQZd22wOHZm/6m+mYEluHEmfVpFit1+yQh6kZLrg1zKF4
9nap7rcp1xzSaqnCccyGBndIUCozJ3mMuaGStkKD3Q69JSq1u4LzVR5Wuyepcz0T
zWPiR4p0Qv2V+zB4ATzLXVDmTEFOPkSgENjstVtFKgMiOerD6DHkpL8WMzIOLfwL
TIZB/N3zQzOXjAK3w1LECTA69gYB9/c3lxlK7iyAyjGpDMjAdqV4A+XhLwe8/ZPK
NmnLZg==
=HzfK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200212' into staging
Fix breakpoint invalidation.
Add support for tcg helpers with 7 arguments.
Add support for gvec helpers with 5 arguments.
# gpg: Signature made Thu 13 Feb 2020 00:21:34 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20200212:
tcg: Add tcg_gen_gvec_5_ptr
tcg: Add support for a helper with 7 arguments
exec: flush CPU TB cache in breakpoint_invalidate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv8.1-VMID16 extension extends the VMID from 8 bits to 16 bits:
* the ID_AA64MMFR1_EL1.VMIDBits field specifies whether the VMID is
8 or 16 bits
* the VMID field in VTTBR_EL2 is extended to 16 bits
* VTCR_EL2.VS lets the guest specify whether to use the full 16 bits,
or use the backwards-compatible 8 bits
For QEMU implementing this is trivial:
* we do not track VMIDs in TLB entries, so we never use the VMID field
* we treat any write to VTTBR_EL2, not just a change to the VMID field
bits, as a "possible VMID change" that causes us to throw away TLB
entries, so that code doesn't need changing
* we allow the guest to read/write the VTCR_EL2.VS bit already
So all that's missing is the ID register part: report that we support
VMID16 in our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200210120146.17631-1-peter.maydell@linaro.org
The count of ARM cores is encoded in the board revision. Add a
helper to extract the number of cores, and use it. This will be
helpful when we add the Raspi0/1 that have a single core.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-14-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message as suggested by Igor]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the exception of the ignore_memory_transaction_failures
flag set for the raspi2, both machine_class_init() methods
are now identical. Merge them to keep a unique method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-13-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the model type. Add a helper
to extract the model, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-12-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
