Commit Graph

22288 Commits

Author SHA1 Message Date
Richard Henderson
c6f7e4fb9a tcg-sparc: Support GUEST_BASE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:18 +02:00
Richard Henderson
a0ce341aac tcg-sparc: Fix qemu_ld/st to handle 32-bit host.
At the same time, split out the tlb load logic to a new function.
Fixes the cases of two data registers and two address registers.
Fixes the signature of, and adds missing, qemu_ld/st opcodes.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:17 +02:00
Richard Henderson
9b9c37c364 tcg-sparc: Assume v9 cpu always, i.e. force v8plus in 32-bit mode.
Current code doesn't actually work in 32-bit mode at all.  Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:16 +02:00
Richard Henderson
d5dd696fe3 tcg-sparc: Don't MAP_FIXED on top of the program
The address we pick in sparc64.ld is also 0x60000000, so doing a fixed map
on top of that is guaranteed to blow up.  Choosing 0x40000000 is exactly
right for the max of code_gen_buffer_size set below.

No need to ever use MAP_FIXED.  While getting our desired address helps
optimize the generated code, we won't fail if we don't get it.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:16 +02:00
Richard Henderson
a221ae3fcc tcg-sparc: Fix ADDX opcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:15 +02:00
Richard Henderson
3ee60ad44a tcg-sparc: Hack in qemu_ld/st64 for 32-bit.
Not actually implemented, but at least we avoid the tcg assert at startup.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2012-09-21 22:02:15 +02:00
Richard Henderson
62724cc5eb linux-user: Use memcpy in get_user/put_user.
When host and target have differing alignment rules, using a cast
and direct memory operation can result in SIGBUS.  Use memcpy instead,
which the compiler will happily optimize when alignment is satisfied.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-09-21 22:02:15 +02:00
Aurelien Jarno
cfb75cb980 Merge branch 'usb.65' of git://git.kraxel.org/qemu
* 'usb.65' of git://git.kraxel.org/qemu:
  uhci: Don't queue up packets after one with the SPD flag set
  usb-redir: Revert usb-redir part of commit 93bfef4c
  usb-redir: Add chardev open / close debug logging
  usb-redir: Add support for migration
  usb-redir: Store max_packet_size in endp_data
  usb-redir: Add an already_in_flight packet-id queue
  usb-redir: Change cancelled packet code into a generic packet-id queue
  ehci: Walk async schedule before and after migration
  ehci: Don't set seen to 0 when removing unseen queue-heads
  configure: usbredir fixes
  ehci: Don't process too much frames in 1 timer tick (v2)
  ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
  ehci: switch to new-style memory ops
  usb-host: allow emulated (non-async) control requests without USBPacket
2012-09-21 19:53:26 +02:00
Richard Henderson
e55f523d79 tcg-hppa: Fix broken load/store helpers
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers
was not respecting the ABI requirement for 64-bit values
being aligned in registers.

Mirror the ARM port in use of helper functions to marshal
arguments into the correct registers.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:18 +02:00
Richard Henderson
c08d9ee38d tcg-hppa: Fix brcond2 and setcond2
Neither of these functions were performing double-word
compares properly.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Richard Henderson
fe7e1d3ec4 tcg: Fix !USE_DIRECT_JUMP
Commit 6375e09e changed the type of TranslationBlock.tb_next,
but failed to change the type of TCGContext.tb_next.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Aurelien Jarno
eca5c30333 gdbstub/sh4: fix build with USE_SOFTFLOAT_STRUCT_TYPES
We have to use different type to access float values when
USE_SOFTFLOAT_STRUCT_TYPES is defined.

Rework SH4 version of cpu_gdb_{read,write}_register() using
a single case, and fixing the coding style. Use ldll_p() and
stfl_p() to access float values.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Richard Henderson
5d8f536300 tcg: Optimize two-address commutative operations
While swapping constants to the second operand, swap
sources matching destinations to the first operand.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Richard Henderson
fa01a2084e tcg: Optimize movcond for constant comparisons
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Richard Henderson
d0a16297c9 tcg-i386: Implement movcond
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Richard Henderson
57e289de73 target-alpha: Use movcond
For proper cmov insns, as well as the non-goto-tb case
of conditional branch.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:17 +02:00
Richard Henderson
ffc5ea09af tcg: Introduce movcond
Implemented with setcond if the target does not provide
the optional opcode.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
080df491db target-sh4: remove useless code
Almost dead code.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
7a64244fda target-sh4: cleanup DisasContext
We should avoid accessing env at translation stage, except of course for
static values like the supported features.

Remove variables copied from env in DisasContext and use the TB flags
instead.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
1012740098 target-sh4: rework exceptions handling
Since commit fd4bab102 PC is restored in case of exception through code
retranslation. While it is clearly the thing to do in case it is not
not known if an helper is going to trigger an exception or not
(e.g. for load/store, FPU, etc.), it just make things slower when the
exception is already known at translation time.

Partially revert this commit and save PC in the TCG code. Set bstate to
BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep
helper. Make all the exception helpers to call raise_exception and mark
it as noreturn.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
ed22e6f30e target-sh4: remove gen_clr_t() and gen_set_t()
gen_clr_t() and gen_set_t() have very few callers and can be remplaced
by a single line. Remove them.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
c53b36d210 target-sh4: optimize swap.w
It's possible swap the two 16-bit words of a 32-bit register using a
rotation. If the TCG target doesn't implement rotation, the replacement
code is similar to the previously implemented code.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
f16640f47b target-sh4: optimize xtrct
The register being 32 bit long, after a shift to the right by 16 bits,
the upper 16 bit are already cleared. There is no need to call ext16u
to clear them.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
ad8d25a11f target-sh4: implement addv and subv using TCG
addv and subv helpers implementation is directly copied from the SH4
manual and looks quite complex. It is however possible to explain it
without branches, and is therefore possible to implement it with TCG.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Aurelien Jarno
22b88fd77e target-sh4: implement addc and subc using TCG
Now that setcond is available, the addc and subc can easily be
implemented using TCG.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:15 +02:00
Aurelien Jarno
ff2086fed2 target-sh4: use float32_muladd() to implement fmac
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as
SH4 is always returning a default NaN.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:15 +02:00
Aurelien Jarno
f8e7343956 target-sh4: mark a few helpers const and pure
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:15 +02:00
Ronnie Sahlberg
1109c89405 SCSI: Standard INQUIRY data should report HiSup flag as set.
QEMU as far as I know only reports LUN numbers using the modes that
are described in SAM4.
As such, since all LUN numbers generated by the SCSI emulation in QEMU
follow SAM4, we should set the HiSup bit in the standard INQUIRY data
to indicate such.

From SAM4:
  4.6.3 LUNs overview
  All LUN formats described in this standard are hierarchical in
  structure even when only a single level in that hierarchy is used.
  The HISUP bit shall be set to one in the standard INQUIRY data
  (see SPC-4) when any LUN format described in this standard is used.
  Non-hierarchical formats are outside the scope of this standard.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
2012-09-21 16:17:49 +02:00
Paolo Bonzini
e93176d55f scsi-disk: use scsi_data_cdb_length
This simplifies and unifies the parsing of READ, WRITE and WRITE SAME
commands.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:17:49 +02:00
Paolo Bonzini
bb729f7581 scsi: introduce scsi_cdb_length and scsi_data_cdb_length
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:14:55 +02:00
Paolo Bonzini
12ca76fc48 scsi-disk: fix check for out-of-range LBA
This fix is needed to correctly handle 0-block read and writes.
Without it, a 0-block access at LBA 0 would underflow.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:12:34 +02:00
Paolo Bonzini
444bc90861 scsi-disk: introduce check_lba_range
Abstract the test for an out-of-range (starting block, block count)
pair.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:12:34 +02:00
Ronnie Sahlberg
40a13ca8d2 iSCSI: We dont need to explicitely call qemu_notify_event() any more
We no longer need to explicitely call qemu_notify_event() any more
since this is now done automatically any time the filehandles we listen
to change.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:12:33 +02:00
Ronnie Sahlberg
f1a12821d7 iSCSI: We need to support SG_IO also from iscsi_ioctl()
We need to support SG_IO from the synchronous iscsi_ioctl() since
scsi-block uses this to do an INQ to the device to discover its properties
This patch makes scsi-block work with iscsi.

Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-21 16:05:51 +02:00
Richard Henderson
2b85cf0efd target-alpha: Initialize env->cpu_model_str
Save the cpu_model_str so that we have a non-null value when
creating a new cpu during clone.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:59 +02:00
Andreas Färber
473955e5c3 target-i386: Drop unused setscalar() macro
It was only used by now removed setfeatures() function.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:59 +02:00
Eduardo Habkost
c04321b368 target-i386: Kill cpudef config section support
It's nice to have a flexible system to maintain CPU models as data, but
this is holding us from making improvements in the CPU code because it's
not using the common infra-structure, and because the machine-type data
is still inside C code.

Users who want to configure CPU features directly may simply use the
"-cpu" command-line option (and maybe an equivalent -device option in
the future) to set CPU features.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Eduardo Habkost
bc3e1291dd target-i386: x86_cpudef_setup() coding style change
Make source code lines shorter.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Eduardo Habkost
ba6212d8a8 Eliminate cpus-x86_64.conf file
This file is not needed anymore, as QEMU won't ship any config-based
cpudefs out of the box, relying only on the builtin CPU models.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Eduardo Habkost
3eca46420c target-i386: Move CPU models from cpus-x86_64.conf to C
Those models are maintained by QEMU and may require compatibility code
to be added when making some changes. Keeping the data in the C source
code should make it simpler to handle those details.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Eduardo Habkost
a75b081846 target-i386: Add missing CPUID_* constants
Those constants will be used by new CPU model definitions.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Peter Maydell
e916cbf803 Drop cpu_list_id macro
Since the only user of the extended cpu_list_id() format
was the x86 ?model/?dump/?cpuid output, we can drop it
completely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Peter Maydell
6cdf885420 target-i386: Fold -cpu ?cpuid, ?model output into -cpu help, drop ?dump
Commit c8057f95 (accidentally) disabled the ability to pass
option strings starting with '?' to the target-specific
cpu_list function, so the target-i386 specific "-cpu ?dump",
"-cpu ?cpuid" and "-cpu ?model" stopped working.

Since these options are undocumented and not used by libvirt,
simply drop them completely rather than reinstating them
with new style syntax. Instead, we fold the ?model and ?cpuid
output into the output of the plain "-cpu help" output. The
detailed output produced by ?dump is dropped.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:58 +02:00
Andreas Färber
f2ca052414 MAINTAINERS: Add entry for QOM CPU
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-09-21 15:12:57 +02:00
Max Filippov
c26032b2c9 target-xtensa: don't emit extra tcg_gen_goto_tb
Unconditional gen_check_loop_end at the end of disas_xtensa_insn
can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when
TB ends at LEND with a branch).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
2012-09-21 03:07:27 +04:00
Max Filippov
f9cb5045d1 target-xtensa: fix extui shift amount
extui opcode only uses lowermost op1 bit for sa4.

Reported-by: malc <av1474@comtv.ru>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
2012-09-21 03:07:27 +04:00
Aurelien Jarno
a255066039 tcg/optimize: fix end of basic block detection
Commit e31b0a7c05 fixed copy propagation on
32-bit host by restricting the copy between different types. This was the
wrong fix.

The real problem is that the all temps states should be reset at the end
of a basic block. This was done by adding such operations in the switch,
but brcond2 was forgotten (that's why the crash was only observed on 32-bit
hosts).

Fix that by looking at the TCG_OPF_BB_END instead. We need to keep the case
for op_set_label as temps might be modified through another path.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-19 21:53:46 +02:00
Richard Henderson
bd277fa196 target-mips: Implement Loongson Multimedia Instructions
Implements all of the COP2 instructions except for the S<cond>
family of comparisons.  The documentation is unclear for those.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-19 21:40:48 +02:00
Richard Henderson
fb7729e2d0 target-mips: Always evaluate debugging macro arguments
this will prevent some of the compilation errors with debugging
enabled from creeping back in.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-19 21:40:47 +02:00
Richard Henderson
9fa7748873 target-mips: Fix MIPS_DEBUG.
The macro uses the DisasContext.  Pass it around as needed.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-19 21:40:47 +02:00