Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1446203414-4013-3-git-send-email-kraxel@redhat.com
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API for boards to inject their own preboot software (or
firmware) sequence.
The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).
The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).
Rewrite the comment for the primary boot blob.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This converts vga code to curses code in console_write_bh().
With this changes, we can see line graphics (for example, dialog uses)
correctly.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWMmDMAAoJEJykq7OBq3PIHkIIAKyL9iY4EipKrtdMoWZu/Kfm
I9g4NVVqPF4QmTfYpZVxWglvBy0g0+2p1h4DQ5KheUNr7DV2uchSSsN38MWnEgH/
XTRpY858jcWx4sSAvYpz+kUVRBEtJJL8a/1aTBvYRxcbNE1X1lm72m7mm4KXGGud
PZ0fdj/UODHeoTOnMHddbs8Rs0kdHhlckl2Mfkz2dUgYAuZMK7xR7OIE7kOqWBcR
p5/I1Jq3wgmp267ZPVNS17u8Cff2PIElv0Z3Ouubixhhf+k5kvLBtgTbTJ81h7/4
NfmIRwsmAPhtnDSDXqFJ8KgwUYpGYYtPrK8DIXIWYwPdSjkIIdl1gNtc2CGyV3w=
=nA50
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Thu 29 Oct 2015 18:09:16 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
block: Consider all child nodes in bdrv_requests_pending()
target-arm: xlnx-zynqmp: Add sdhci support.
sdhci: Split sdhci.h for public and internal device usage
sd.h: Move sd.h to include/hw/sd/
virtio: sync the dataplane vring state to the virtqueue before virtio_save
gdb command: qemu handlers
virtio-blk: switch off scsi-passthrough by default
ppc/spapr: add 2.4 compat props
s390x: include HW_COMPAT_* props
qemu-gdb: add $qemu_coroutine_sp and $qemu_coroutine_pc
qemu-gdb: extract parts of "qemu coroutine" implementation
qemu-gdb: allow using glibc_pointer_guard() on core dumps
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add two SYSBUS_SDHCI devices for xlnx-zynqmp
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and
internal version (i.e hw/sd/sdhci-interna.h) based on register
declarations and object declaration.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Create a sd directory under include/hw/ and move sd.h to
include/hw/sd/
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Devices that are compliant with virtio-1 do not support scsi
passthrough any more (and it has not been a recommended setup
anyway for quite some time). To avoid having to switch it off
explicitly in newer qemus that turn on virtio-1 by default, let's
switch the default to scsi=false for 2.5.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1444991154-79217-4-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QObject_HEAD is a macro expanding into the common part of structs that
are sub-types of QObject. It's always been just QObject base, and
unlikely to change. Drop the macro, because the code is clearer with
out it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444918537-18107-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will get the notification to scan the slot.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit aa8580cddf.
As described in
http://article.gmane.org/gmane.comp.emulators.qemu/371432
that commit causes linux guests to crash on memory hot-unplug.
The original problem it's trying to solve has now
been addressed within virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_map_sg currently fails if one of the entries it's mapping is
contigious in GPA but not HVA address space. Introduce virtio_map which
handles this by splitting sg entries.
This new API generally turns out to be a good idea since it's harder to
misuse: at least in one case the existing one was used incorrectly.
This will still fail if there's no space left in the sg, but luckily max
queue size in use is currently 256, while max sg size is 1024, so we
should be OK even is all entries happen to cross a single DIMM boundary.
Won't work well with very small DIMM sizes, unfortunately:
e.g. this will fail with 4K DIMMs where a single
request might span a large number of DIMMs.
Let's hope these are uncommon - at least we are not breaking things.
Note: virtio-scsi calls virtio_map_sg on data loaded from network, and
validates input, asserting on failure. Copy the validating code here -
it will be dropped from virtio-scsi in a follow-up patch.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Currently, if the kernel does not have live migration API, the migration
will still be attempted, but vGIC save/restore functions will just not do
anything. This will result in a broken machine state.
This patch fixes the problem by adding migration blocker if kernel API is
not supported.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VOcb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/ivshmem-pull-request' into staging
ivshmem series
# gpg: Signature made Mon 26 Oct 2015 09:27:46 GMT using RSA key ID 75969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/ivshmem-pull-request: (51 commits)
doc: document ivshmem & hugepages
ivshmem: use little-endian int64_t for the protocol
ivshmem: use kvm irqfd for msi notifications
ivshmem: rename MSI eventfd_table
ivshmem: remove EventfdEntry.vector
ivshmem: add hostmem backend
ivshmem: use qemu_strtosz()
ivshmem: do not keep shm_fd open
tests: add ivshmem qtest
qtest: add qtest_add_abrt_handler()
msix: implement pba write (but read-only)
contrib: remove unnecessary strdup()
ivshmem: add check on protocol version in QEMU
docs: update ivshmem device spec
ivshmem-server: fix hugetlbfs support
ivshmem-server: use a uint16 for client ID
ivshmem-client: check the number of vectors
contrib: add ivshmem client and server
util: const event_notifier_get_fd() argument
ivshmem: reset mask on device reset
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version. Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
ivshmem is going to use MSIX state conditionally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
If a chardev is allowed to be created outside of QMP, then it must be
also possible to free it. This is useful for ivshmem that creates
chardev anonymously and must be able to free them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=xcrS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 23 Oct 2015 17:59:56 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (37 commits)
tests: Add test case for aio_disable_external
block: Add "drained begin/end" for internal snapshot
block: Add "drained begin/end" for transactional blockdev-backup
block: Add "drained begin/end" for transactional backup
block: Add "drained begin/end" for transactional external snapshot
block: Introduce "drained begin/end" API
aio: introduce aio_{disable,enable}_external
dataplane: Mark host notifiers' client type as "external"
nbd: Mark fd handlers client type as "external"
aio: Add "is_external" flag for event handlers
throttle: Remove throttle_group_lock/unlock()
blockdev: Allow more options for BB-less BDS tree
blockdev: Pull out blockdev option extraction
blockdev: Do not create BDS for empty drive
block: Prepare for NULL BDS
block: Add blk_insert_bs()
block: Prepare remaining BB functions for NULL BDS
block: Fail requests to empty BlockBackend
block: Make some BB functions fall back to BBRS
block: Add BlockBackendRootState
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The semantics is that after bdrv_drained_begin(bs), bs will not get new external
requests until the matching bdrv_drained_end(bs).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers pass in false, and the real external ones will switch to
true in coming patches.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The group throttling code was always meant to handle its locking
internally. However, bdrv_swap() was touching the ThrottleGroup
structure directly and therefore needed an API for that.
Now that bdrv_swap() no longer exists there's no need for the
throttle_group_lock() API anymore.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function associates the given BlockDriverState with the given
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This structure will store some of the state of the root BDS if the BDS
tree is removed, so that state can be restored once a new BDS tree is
inserted.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Throttle groups are not necessarily referenced by BDSs alone; a later
patch will essentially allow BBs to reference them, too. Make the
ref/unref functions public so that reference can be properly accounted
for.
Their interface is slightly adjusted in that they return and take a
ThrottleState pointer, respectively, instead of a ThrottleGroup pointer.
Functionally, they are equivalent, but since ThrottleGroup is not meant
to be used outside of block/throttle-groups.c, ThrottleState is easier
to handle.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options are only relevant for the user of a whole BDS tree (like a
guest device or a block job) and should thus be moved into the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the comment above bdrv_get_stats() says, BlockAcctStats is something
which belongs to the device instead of each BlockDriverState. This patch
therefore moves it into the BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockAcctStats contains statistics about the data transferred from and
to the device; wr_highest_sector does not fit in with the rest.
Furthermore, those statistics are supposed to be specific for a certain
device and not necessarily for a BDS (see the comment above
bdrv_get_stats()); on the other hand, wr_highest_sector may be a rather
important information to know for each BDS. When BlockAcctStats is
finally removed from the BDS, we will want to keep wr_highest_sector in
the BDS.
Finally, wr_highest_sector is renamed to wr_highest_offset and given the
appropriate meaning. Externally, it is represented as an offset so there
is no point in doing something different internally. Its definition is
changed to match that in qapi/block-core.json which is "the offset after
the greatest byte written to". Doing so should not cause any harm since
if external programs tried to calculate the volume usage by
(wr_highest_offset + 512) / volume_size, after this patch they will just
assume the volume to be full slightly earlier than before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
guest_block_size is a guest device property so it should be moved into
the interface between block layer and guest devices, which is the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_is_available() returns true iff the BDS is inserted (which means
blk_bs() is not NULL and bdrv_is_inserted() returns true) and if the
tray of the guest device is closed.
blk_is_inserted() is changed to return true only if blk_bs() is not
NULL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_is_inserted(), blk_is_inserted(), and the callback
BlockDriver.bdrv_is_inserted() return a bool.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The host cache information may not make sense for the guest if the VM
CPU topology doesn't match the host CPU topology. To make sure we won't
expose broken cache information to the guest, disable cache info
passthrough by default, and add a new "host-cache-info" property that
can be used to enable the old behavior for users that really need it.
Cc: Benoît Canet <benoit@irqsave.net>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices. Currently,
this is decided at creation time.
To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can. This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.
Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed. That's an optimization for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name. What it really means is whether we need the
TCE table created to be able to support VFIO devices.
VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.
Rename the parameter to "need_vfio" throughout. This is a cosmetic change,
with no impact on the logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.
For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.
Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
=+G1+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc, virtio features, fixes, cleanups
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (37 commits)
hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
i386: keep cpu_model field in MachineState uptodate
vhost: set the correct queue index in case of migration with multiqueue
piix: fix resource leak reported by Coverity
seccomp: add memfd_create to whitelist
vhost-user-test: check ownership during migration
vhost-user-test: add live-migration test
vhost-user-test: learn to tweak various qemu arguments
vhost-user-test: wrap server in TestServer struct
vhost-user-test: remove useless static check
vhost-user-test: move wait_for_fds() out
vhost: add migration block if memfd failed
vhost-user: use an enum helper for features mask
vhost user: add rarp sending after live migration for legacy guest
vhost user: add support of live migration
net: add trace_vhost_user_event
vhost-user: document migration log
vhost: use a function for each call
vhost-user: add a migration blocker
vhost-user: send log shm fd along with log_base
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update cpu_model in MachineState for i386, so that the field can be used
for cpu hotplug, instead of using a static variable.
This patch is rebased on the latest master.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
A new vhost user message is added to allow QEMU to ask to vhost user backend to
broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE
capability.
This new message is sent only if the backend supports the new
VHOST_USER_PROTOCOL_F_RARP protocol feature.
The payload of this new message is the MAC address of the guest (not known by
the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid
to create a new payload message type.
This new message has no equivalent ioctl so a new callback is added in the
userOps structure to send the request.
Upon reception of this new message the vhost user backend must generate and
broadcast a fake RARP request to notify the migration is terminated.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
[Rebased and fixed checkpatch errors - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Replace the generic vhost_call() by specific functions for each
function call to help with type safety and changing arguments.
While doing this, I found that "unsigned long long" and "uint64_t" were
used interchangeably and causing compilation warnings, using uint64_t
instead, as the vhost & protocol specifies.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Fix enum usage and MQ - Thibaut Collet]
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Send the shm for the dirty pages logging if the backend supports
VHOST_USER_PROTOCOL_F_LOG_SHMFD. Wait for a reply to make sure
the old log is no longer used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
If the backend is requires it, allocate shareable memory.
vhost_log_get() now uses 2 globals "vhost_log" and "vhost_log_shm", that
way there is a common non-shareable log and a common shareable one.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Check if the backend has VHOST_USER_PROTOCOL_F_LOG_SHMFD feature and
require a shared log.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
Split VHOST_SET_LOG_BASE call in a seperate function callback, so that
type safety works and more arguments can be added in the next patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
