While container-based cross compilers are not supported, this already
makes it possible to build vof on any machine that has an installation
of GCC and binutils for 32- or 64-bit PowerPC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-27-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build x86 optionroms on any machine that has an installation
of GCC and binutils for 32- or 64-bit x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-26-alex.bennee@linaro.org>
While container-based cross compilers are not supported, this already makes
it possible to build s390-ccw on any machine that has s390x GCC and binutils
installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220527153603.887929-25-alex.bennee@linaro.org>
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>
Just hardcode $(CC) -E, it should be enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-13-alex.bennee@linaro.org>
Staring with SEABIOS_HPPA_VERSION 6 the serial ports are now emulated as
on physical hardware, with LASI UART being serial port #0 and DINO UART
as serial port #1. On older versions those ports were swapped.
This SeaBIOS-hppa fix is needed to allow fixing the qemu serial
pass-through from host to guest.
Signed-off-by: Helge Deller <deller@gmx.de>
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
=ZrTm
-----END PGP SIGNATURE-----
Merge tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console
This series updates the SeaBIOS-hppa firmware to version 5, in which additional
HP fonts were added to the firmware and the firmware boot console was fixed to
accept input from the emulated PS/2 keyboard when running in graphical mode
(serial console was working before already). To test use the "-boot menu=on"
qemu option.
The artist graphics card driver got various fixes when running the X11-Windows
on HP-UX:
- fixes the horizontal and vertical postioning of the X11 cursor with HP-UX
- allows X11 to blank the screen (e.g. screensaver)
- allows the X11 driver to turn the X11 cursor on/off
Signed-off-by: Helge Deller <deller@gmx.de>
--
Changes compared to version 2 of this series:
- Fixed style issues in the X-cursor positioning patch (noticed by Mark Cave-Ayland)
Changes compared to version 1 of this series:
- Added some Acked-by's from Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- SeaBIOS-hppa v5 instead of v4 (PS/2 keyboard now works in boot console)
- integrated artist X11 X-cusor positioning fix (which was sent serperately before)
--
This series should apply cleanly on git head and can be pulled for testing
from: https://github.com/hdeller/qemu-hppa.git artist-cursor-fix-final
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYoUcLwAKCRD3ErUQojoP
# X/joAQCmuV5MD+BTWf91fRTfzXSfOYSp1XahTaItUldKG2ZBWQD+Lflhsoyg4xLd
# 2daeDRN1tH2HWldjnCPyMyZ5Ag97PwY=
# =ZrTm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 May 2022 09:17:51 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'artist-cursor-fix-final-pull-request' of https://github.com/hdeller/qemu-hppa:
artist: Fix X cursor position calculation in X11
artist: Emulate screen blanking
artist: Allow to turn cursor on or off
artist: Fix vertical X11 cursor position in HP-UX
artist: Use human-readable variable names instead of reg_xxx
artist: Introduce constant for max cursor size
seabios-hppa: Update SeaBIOS-hppa to VERSION 5
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
New features and fixes in SeaBIOS for hppa/parisc:
* STI firmware now contains additional fonts built-in, which
can be selected with qemu command-line options:
-fw_cfg opt/font,string=1 - a HP 8x16 font
-fw_cfg opt/font,string=2 - a HP 6x13 font
-fw_cfg opt/font,string=3 - a HP 10x20 font
-fw_cfg opt/font,string=4 - a Linux 16x32 font
* Fixed PS/2 keyboard emulation when running in graphical mode.
This allows to type boot commands in the firmware boot menu if
qemu was started with "-boot menu=on" (and no linux kernel was
given on the qemu command line).
* Fix firmware rendenzvous code to clear all pending external intrrupts
before entering the waiting loop.
Signed-off-by: Helge Deller <deller@gmx.de>
Do not rely on the detection that was done in the configure script,
since in the future we may want to cross-compile this file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and
binutils 2.38.
Changes since the previous version:
Christophe Lombard (15):
npu2: move opal api
pau: introduce support
rainier: detect pau devices
pau: assign bars
pau: create phb
pau: enabling opencapi
pau: translation layer configuration
pau: enable interrupt on error
pau: complete phb ops
pau: hmi scom dump
pau: phy init
pau: link training
pau: update current opal call functions
pau: mmio invalidates
pau: Add support for OpenCAPI Persistent Memory devices.
Cédric Le Goater (4):
xive/p10: Fix xive_special_cache_check when DEBUG=1
xive/p10: Fix mismatch errors when DEBUG=1
interrupts: Do not advertise XICS support on P10
skiboot v6.6.6 release notes
Frederic Barrat (6):
phb4/5: Escalate page-level TCE kills
npu3: Remove GPU support on Swift
phb5: Remove obsolete capp-related properties
xive/p10:: Declare xive2 DT node as an interrupt-controller
skiboot v6.0.24 release notes
opal-api: Drop diagnostics data type symbol for PHB5
Michael Ellerman (3):
external/mambo: Print more info when the kernel is too big
doc: Make it clear all existing platforms use Power9N
docs: Add Swift, Mowgli & Rainier
Nicholas Piggin (12):
external/mambo: Updates for POWER10 configuration for DD2.0
external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC
external/mambo: Add POWER10 small-core mode
HBRT: fix clobbered r16 when host services handlers are called
interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo
cpu: cpu_idle_job SMT priority fix
cpu: add debug check in cpu_relax
asm/head: Fix P10 HILE for little endian build
phb4: annotate tbl_pest with endian types
Remove support for POWER8 DD1
phb3: make endian-clean
flash: AST BMC endian fixes
Nick Child (1):
secvar: Free md context on hash error
Ryan Grimm (1):
AWAN simulator support for P10
Vasant Hegde (5):
ci: Bump qemu version
hello_world: Add p10 mambo tests
skiboot v6.7.3 release notes
skiboot v6.8.1 release notes
skiboot v7.0 release notes
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some of the roms build with -march=i486 -m16 which is incompatible
with -fcf-protection. That in turn is can be set by default, for
example in Ubuntu [1].
That causes:
cc1: error: ‘-fcf-protection’ is not compatible with this target
This won't work on -march=i486 -m16 and no matter if set or not we can
override it to "none" if the option is known to the compiler to be
able to build reliably.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/889
[1]: https://wiki.ubuntu.com/ToolChain/CompilerFlags#A-fcf-protection
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220323090713.1002588-1-christian.ehrhardt@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This installs VOF-related binaries (the firmware and the preformatted
NVRAM) as those were left out when the VOF was submitted initially.
Fixes: fc8c745d50 ("spapr: Implement Open Firmware client interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220208103751.1587902-1-aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New firmware features and fixes:
* Allow up to 16 CPUs
* Add TOC button support:
To trigger a TOC, execute "nmi" in the qemu monitor (Ctrl-A C)
* New opt/hostid fw_cfg option to change hostid:
-fw_cfg opt/hostid,string=334455
* Add opt/console fw_cfg option to select default console:
-fw_cfg opt/console,string=serial
-fw_cfg opt/console,string=graphics
* Add Linux TER16x32 font to STI firmware:
-fw_cfg opt/font,string=2
* Leave IRQs disabled after rendevouz
Signed-off-by: Helge Deller <deller@gmx.de>
Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* KVM_GET/SET_SREGS2 support for x86
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHe0v8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPPgQf/Usiph4SA/MjpqwmLP8ZL64ghWzUm
ZjZRRDC12cApBE/P7/TdzHGwx6IiRu2hWt3wVLFWWEpN7xNwoelrhgLZcr8Dl80P
1b2Pe/BHe1xXI+xC/BgK4qt8sxhSvb9hdFwgz2J4mPSgN64d0sXszm/r56rJ/PXq
T2/M/o6wyFexPhYMQcN/ssQIeQzL8uXTifd7GqpcfRM4iivW1KAFVv9zr+SWqE+7
QavIoRTpBiAb7r0EtuxLrPdgiqkx0OKXE93mwrjM0Anci33hdVHLqe8Zs4gmRzyM
sLqArJwG/kdy2fL8Pc3ncPOxKsBgXDIqfucAJ8Tong1hwLJXiyZnJTxMSg==
=Q2aI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson cleanups
* KVM_GET/SET_SREGS2 support for x86
# gpg: Signature made Wed 12 Jan 2022 13:09:19 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
meson: reenable filemonitor-inotify compilation
meson: build all modules by default
configure: do not create roms/seabios/config.mak if SeaBIOS not present
tests/tcg: Fix target-specific Makefile variables path for user-mode
KVM: x86: ignore interrupt_bitmap field of KVM_GET/SET_SREGS
KVM: use KVM_{GET|SET}_SREGS2 when supported.
meson: add comments in the target-specific flags section
configure, meson: move config-poison.h to meson
meson: build contrib/ executables after generated headers
configure: move non-command-line variables away from command-line parsing section
configure: parse --enable/--disable-strip automatically, flip default
configure, makefile: remove traces of really old files
configure: do not set bsd_user/linux_user early
configure: simplify creation of plugin symbol list
block/file-posix: Simplify the XFS_IOC_DIOINFO handling
meson: cleanup common-user/ build
user: move common-user includes to a subdirectory of {bsd,linux}-user/
meson: reuse common_user_inc when building files specific to user-mode emulators
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always include the STRIP variable in config-host.mak (it's only used
by the s390-ccw firmware build, and it adds a default if configure
omitted it), and use meson-buildoptions.sh to turn
--enable/--disable-strip into -Dstrip.
The default is now not to strip the binaries like for almost every other
package that has a configure script.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has really just one fix from Stefan, the rest is housekeeping.
The full changelog is:
Alexey Kardashevskiy (3):
Revert "make: Define default rule for .c when V=1 or V=2"
js2x: Fix compile and cleanup
version: update to 20211112
Stefan Berger (1):
tcgbios: Disable platform hierarchy in case of failure
Thomas Huth (8):
Mention the CR vs. LF problem in the documentation
slof/fs/accept: Replace TABs with spaces
Fix the URL to the Linux kernel coding style
lib/libc/README.txt: Fix "cannel" typo
travis.yml: Fix keywords
travis.yml: Update to Focal Fossa
travis.yml: Compile-test the qemu build
Silence some trivial compiler warning in the js2x code
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Add a new option rom for the multiboot loader, using DMA transfers to copy
data instead of "rep insb".
This significantly lowers QEMU's startup latency by a factor of about 40,
for example, going from 30sec to 0.8sec when loading modules of 120MB
in size.
Signed-off-by: Marcus Hähnel <marcus.haehnel@kernkonzept.com>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
[Modified to keep the non-DMA code depending on #ifdef USE_FW_CFG_DMA;
do not write below stack. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables native builds on MSYS2 with symlinks disabled.
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Message-Id: <2b5ab039-8495-b55f-03f1-ecfd996907a9@zapateado.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update SeaBIOS to seabios-hppa-v2
Changes in seabios-hppa:
* Include all latest upstream SeaBIOS patches
* add support for the qemu "bootindex" parameter
* add support for the qemu "-boot order=g-m" parameter to choose
SCSI ID
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <YU4st/zcLcg6RKNn@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Skip the test if bzip2 is not available, and run it after they are
uncompressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The edk2 firmware blobs are needed to run bios-tables-test. Unpack
them if any UEFI-enabled target is selected, so that the test can run.
This is a bit more than is actually necessary, since bios-tables-test
does not run for all UEFI-enabled targets, but it is the easiest
way to write this logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It includes support for the POWER10 processor and the QEMU platform.
Built from submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210806180040.156999-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is all about TPM fixes and improvements.
The change log is:
Alexey Kardashevskiy (2):
tcgbios: Fix warnings
version: update to 20210711
Stefan Berger (9):
tcgbios: Fix details in log entries
tcgbios: Fix a typo in the sha256 algo description
tcgbios: Add implementations for sha1, sha384, and sha512
tpm: Add firmware API call 2HASH-EXT-LOG
tcgbios: Change format of S_CRTM_VERSION string to ucs-2
tcgbios: Use assembly for 32 bit rotr in sha256
tcgbios: Use The proper sha function for each PCR bank
tcgbios: Add test cases and test script to run them
Travis: Add script for running tests on Travis
Thomas Huth (1):
Fix bad header guard in version.h
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This addresses the comments from v22.
The functional changes are (the VOF ones need retesting with Pegasos2):
(VOF) setprop will start failing if the machine class callback
did not handle it;
(VOF) unit addresses are lowered in path_offset();
(SPAPR) /chosen/bootargs is initialized from kernel_cmdline if
the client did not change it.
Fixes: 5c991e5d4378 ("spapr: Implement Open Firmware client interface")
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210708065625.548396-1-aik@ozlabs.ru>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.
Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.
This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.
The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.
This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.
This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.
In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.
When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.
This adds basic instances support which are managed by a hash map
ihandle -> [phandle].
Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk
This OF CI does not implement "interpret".
Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.
With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735
The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.
This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.
This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit cc3d15a5ea ("docs: rstfy s390 dasd ipl documentation")
converted docs/devel/s390-dasd-ipl.txt to docs/devel/s390-dasd-ipl.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/s390-dasd-ipl.txt/s390-dasd-ipl.rst/ \
$(git grep -l docs/devel/s390-dasd-ipl.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210517151702.109066-6-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang versions before v11.0 insist on having the %rX or %cX register
names instead of just a number. Since our Travis-CI is currently
still using Clang v6.0, we have to fix this to avoid failing jobs.
Message-Id: <20210512171550.476130-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When building on Fedora 34 (gcc version 11.0.0 20210210) we get:
In file included from pc-bios/s390-ccw/main.c:11:
In function ‘memset’,
inlined from ‘boot_setup’ at pc-bios/s390-ccw/main.c:185:5,
inlined from ‘main’ at pc-bios/s390-ccw/main.c:288:5:
pc-bios/s390-ccw/libc.h:28:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
28 | p[i] = c;
| ~~~~~^~~
The offending code is:
memset((char *)S390EP, 0, 6);
where S390EP is a const address:
#define S390EP 0x10008
The compiler doesn't know how big that pointed area is, so it assume that
its length is zero. This has been reported as BZ#99578 to GCC:
"gcc-11 -Warray-bounds or -Wstringop-overread warning when accessing a
pointer from integer literal"
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
As this warning does us more harm than good in the BIOS code (where
lot of direct accesses to low memory are done), silence this warning
for all BIOS objects.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210422145911.2513980-1-philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210502174836.838816-4-thuth@redhat.com>
[thuth: Use the pre-existing cc-option macro instead of adding a new one]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cc-option macro is not doing what it should - compared with the
original from the rules.mak file that got removed with commit
660f793093 ("Makefile: inline the relevant parts of rules.mak"),
the arguments got changed and thus the macro is rather doubling
the QEMU_CFLAGS than adding the flag that should be tested.
Message-Id: <20210502174836.838816-3-thuth@redhat.com>
Fixes: 22fb2ab096 ("pc-bios/s390-ccw: do not use rules.mak")
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang, the compiler emits a warning:
pc-bios/s390-ccw/main.c:210:5: warning: variable 'found' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
pc-bios/s390-ccw/main.c:214:16: note: uninitialized use occurs here
IPL_assert(found, "Boot device not found\n");
^~~~~
It's a false positive, it only happens because Clang is not smart enough
to see that the panic() function in the "default:" case can never return.
Anyway, let's explicitely mark panic() with "noreturn" to shut up the
warning.
Message-Id: <20210502174836.838816-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are using the compiler to do the linking of the bios files. GCC still
accepts the "-Ttext=..." linker flag directly and is smart enough to
pass it to the linker, but in case we are compiling with Clang, we have
to use the official way with the "-Wl," prefix instead.
Message-Id: <20210423153646.593153-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with clang, it emits a warning like this:
pc-bios/s390-ccw/jump2ipl.c:86:9: warning: indirection of non-volatile null
pointer will be deleted, not trap [-Wnull-dereference]
if (*((uint64_t *)0) & RESET_PSW_MASK) {
^~~~~~~~~~~~~~~~
pc-bios/s390-ccw/jump2ipl.c:86:9: note: consider using __builtin_trap() or
qualifying pointer with 'volatile'
We could add a "volatile" here to shut it up, but on the other hand,
we also have a pointer variable called "reset_psw" in this file already
that points to the PSW at address 0, so we can simply use that pointer
variable instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210423142440.582188-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang, the compiler complains:
pc-bios/s390-ccw/bootmap.c:302:9: warning: logical not is only applied
to the left hand side of this comparison [-Wlogical-not-parentheses]
if (!mbr->dev_type == DEV_TYPE_ECKD) {
^ ~~
The code works (more or less by accident), since dev_type can only be
0 or 1, but it's better of course to use the intended != operator here
instead.
Fixes: 5dc739f343 ("Allow booting in case the first virtio-blk disk is bad")
Message-Id: <20210421163331.358178-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't read the block if a null block number is reached, because this means that
the end of chunk is reached.
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20210416074736.17409-1-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When QEMU originally supported the ppce500 machine back in Jan 2014,
it was created with a 1:1 mapping of PCI bus address. Things seemed
to change rapidly that in Nov 2014 with the following QEMU commits:
commit e6b4e5f479 ("PPC: e500: Move CCSR and MMIO space to upper end of address space")
and
commit cb3778a045 ("PPC: e500 pci host: Add support for ATMUs")
the PCI memory and IO physical address were moved to beyond 4 GiB,
but PCI bus address remained below 4 GiB, hence a non-identity
mapping was created. Unfortunately corresponding U-Boot updates
were missed along with the QEMU changes and the U-Boot QEMU ppce500
PCI support has been broken since then, until this issue was fixed
recently in U-Boot mainline v2021.04 release, specifically by the
following U-Boot series:
http://patchwork.ozlabs.org/project/uboot/list/?series=230985&state=*
The cross-compilation toolchain used to build the U-Boot image is:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/10.1.0/x86_64-gcc-10.1.0-nolibc-powerpc-linux.tar.xz
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is mostly compiler warnings fixed but while doing this,
a bug in MIN() in tcgbios was found.
Alexey Kardashevskiy (14):
helpers: Define MIN()
libc: Compile with -Wextra
elf: Compile with -Wextra
usb: Compile with -Wextra
veth: Compile with -Wextra
virtio: Compile with -Wextra
e1000: Compile with -Wextra
libnet: Compile with -Wextra
libhv: Compile with -Wextra
libnvram: Compile with -Wextra
libtpm: Compile with -Wextra
slof/prim: Compile with -Wextra
Makefile: Actually compile with -Wextra
version: update to 20210217
Thomas Huth (1):
virtio-serial: Remove superfluous serial-* words
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before the change /usr/share/qemu/firmware/50-edk2-x86_64-secure.json
contained the relative path:
"filename": "share/qemu/edk2-x86_64-secure-code.fd",
"filename": "share/qemu/edk2-i386-vars.fd",
After then change the paths are absolute:
"filename": "/usr/share/qemu/edk2-x86_64-secure-code.fd",
"filename": "/usr/share/qemu/edk2-i386-vars.fd",
The regression appeared in qemu-5.2.0 (seems to be related
to meson port).
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Marc-André Lureau" <marcandre.lureau@redhat.com>
CC: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Bug: https://bugs.gentoo.org/766743
Bug: https://bugs.launchpad.net/qemu/+bug/1913012
Signed-off-by: Jannik Glückert <jannik.glueckert@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Message-Id: <20210131143434.2513363-1-slyfox@gentoo.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The --enable-bzip2/--disable-bzip2 configure arguments are
somehow misleading, they check for the bzip2 library, not
the bzip2 program.
We need the bzip2 program to install the EDK2 firmware blobs
(see commit 623ef637a2 "configure: Check bzip2 is available").
Check if the bzip2 program in the global meson.build to avoid
the configuration to succeed, but a later when trying to install
the firmware blobs:
../pc-bios/meson.build:5:2: ERROR: Program 'bzip2' not found
Reported-by: John Snow <jsnow@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: c8d5450bba ("configure: move install_blobs from configure to meson")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Globally declare in the main meson.build:
- the list of EDK2 targets,
- whether the EDK2 blobs have to be installed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent binutils changes dropping unsupported options [1] caused a build
issue in regard to the optionroms.
ld -m elf_i386 -T /<<PKGBUILDDIR>>/pc-bios/optionrom//flat.lds -no-pie \
-s -o multiboot.img multiboot.o
ld.bfd: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
This isn't really a regression in ld.bfd, filing the bug upstream
revealed that this never worked as a ld flag [2] - in fact it seems we
were by accident setting --nmagic).
Since it never had the wanted effect this usage of LDFLAGS_NOPIE, should be
droppable without any effect. This also is the only use-case of LDFLAGS_NOPIE
in .mak, therefore we can also remove it from being added there.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=983d925d
[2]: https://sourceware.org/bugzilla/show_bug.cgi?id=27050#c5
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20201214150938.1297512-1-christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A Linux binary will have the string "S390EP" at address 0x10008,
which is important in getting the guest up off the ground. In the
case of a reboot (specifically chreipl going to a new device),
we should defer to the PSW at address zero for the new config,
which will re-write "S390EP" from the new image.
Let's clear it out at this point so that a reipl to, say, a DASD
passthrough device drives the IPL path from scratch without disrupting
disrupting the order of operations for other boots.
Rather than hardcoding the address of this magic (again), let's
define it somewhere so that the two users are visibly related.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20201120160117.59366-3-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If, for example, we boot off a virtio device and chreipl to a vfio-ccw
device, the space at lowcore will be non-zero. We build a Read IPL CCW
at address zero, but it will have leftover PSW data that will conflict
with the Format-0 CCW being generated:
0x0: 00080000 80010000
------ Ccw0.cda
-- Ccw0.chainData
-- Reserved bits
The data address will be overwritten with the correct value (0x0), but
the apparent data chain bit will cause subsequent memory to be used as
the target of the data store, which may not be where we expect (0x0).
Clear out this space when we boot from DASD, so that we know it exists
exactly as we expect.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201120160117.59366-2-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This also brings in two patches that Debian had to include,
qboot_stop_using_inttypes.patch and qboot_no_jump_tables.diff.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120152408.164346-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture states that the iplb location is only written to low
core for list directed ipl and not for traditional ccw ipl. If we don't
skip this then operating systems that load by reading into low core
memory may fail to start.
We should also not write the iplb pointer for network boot as it might
overwrite content that we got via network.
Fixes: 9bfc04f9ef ("pc-bios: s390x: Save iplb location in lowcore")
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201030122823.347140-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a blob provides a reset PSW then we should use it instead of
branching to the PSW address and using our own mask.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com>
[thuth: Use Elvis operator to shorten long line]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Break the loop if `cur_block_nr` is a null block number because this
means that the end of chunk is reached. In this case we will try to
boot the default entry.
Fixes: ba831b2526 ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This error takes effect when the magic value "zIPL" is located at the
end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic
value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff.
Fixes: ba831b2526 ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-2-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Use "<= ... - 4" instead of "< ... - 3"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
enable_subchannel() is already done during is_dev_possibly_bootable()
(which is called from find_boot_device() -> find_subch()), so there
is no need to do this again in the main() function.
Message-Id: <20200806105349.632-9-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If you try to boot with two virtio-blk disks (without bootindex), and
only the second one is bootable, the s390-ccw bios currently stops at
the first disk and does not continue booting from the second one. This
is annoying - and all other major QEMU firmwares succeed to boot from
the second disk in this case, so we should do the same in the s390-ccw
bios, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If no boot device has been specified (via "bootindex=..."), the s390-ccw
bios scans through all devices to find a bootable device. But so far, it
stops at the very first block device (including virtio-scsi controllers
without attached devices) that it finds, no matter whether it is bootable
or not. That leads to some weird situatation where it is e.g. possible
to boot via:
qemu-system-s390x -hda /path/to/disk.qcow2
but not if there is e.g. a virtio-scsi controller specified before:
qemu-system-s390x -device virtio-scsi -hda /path/to/disk.qcow2
While using "bootindex=..." is clearly the preferred way of booting
on s390x, we still can make the life for the users at least a little
bit easier if we look at all available devices to find a bootable one.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1846975
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case the user did not specify a boot device, we want to continue
looking for other devices if there are no valid SCSI disks on a virtio-
scsi controller. As a first step, do not panic in this case and let
the control flow carry the error to the upper functions instead.
Message-Id: <20200806105349.632-6-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the code to a separate function to be able to re-use it from a
different spot later.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200806105349.632-5-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the "#ifndef E..." guards from the defines here - the header
guard S390_CCW_H at the top of the file should avoid double definition,
and if the error code is defined in a different file already, we're in
trouble anyway, then it's better to see the error at compile time instead
of hunting weird behavior during runtime later.
Also define ENODEV - we will use this in a later patch.
Message-Id: <20200806105349.632-4-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move this part of the code into a separate function to be able
to use it from multiple spots later.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20200806105349.632-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main QEMU code is compiled with -std=gnu99, -fwrapv and -fno-common.
We should use the same flags for the s390-ccw bios, too, to avoid that
we get different behavior with different compiler versions that changed
their default settings in the course of time (it happened at least with
-std=... and -fno-common in the past already).
While we're at it, also group the other flags here in a little bit nicer
fashion: Move the two "-m" flags out of the "-f" area and specify them on
a separate line.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20200806105349.632-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qboot isn't a bios and shouldnt be named that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com
This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refresh the "pc-bios/README" file with edk2 and OpenSSL release info,
matching the edk2-stable202008 firmware images added in the previous
patch.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <e967b4d5-bcc2-3846-0ad6-9e8f4d2f9115@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Rebuild the pc-bios/edk2-*.fd.bz2 binaries, based on the edk2-stable202008
release.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908072939.30178-10-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX1aFfQAKCRD3ErUQojoP
X9kAAP9UgEFiOVCQILI7TSHl2moEjQ7x31CA/Bmod6V+eVKM6QD9Gucjy0KC5DWe
PogywA+CdndMLmH71GN/AFrENVqNnws=
=bbqB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging
hppa power button support, graphics updates and firmware fixes
# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-pull-request:
hw/display/artist: Allow screen size up to 2048 lines
hw/display/artist: Refactor x/y coordination extraction
hw/display/artist: Verify artist screen resolution
target/hppa: Fix boot with old Linux installation CDs
hw/hppa: Add power button emulation
hw/hppa: Tell SeaBIOS port address of fw_cfg
hw/hppa: Change fw_cfg port address
hw/hppa: Store boot device in fw_cfg section
hw/hppa: Make number of TLB and BTLB entries configurable
seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
