This commit adds validation checks for the MCOPRE and MCOSEL values in
the rcc_update_cfgr_register function. If the MCOPRE value exceeds
0b100 or the MCOSEL value exceeds 0b111, an error is logged and the
corresponding clock mux is disabled. This helps in identifying and
handling invalid configurations in the RCC registers.
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine b-l475e-iot01a -qtest \
stdio
writeq 0x40021008 0xffffffff
EOF
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2356
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In bcm2835_property_mbox_push(), some variables are defined at function scope
but used only in a smaller scope of the function:
* tag, bufsize, resplen are used only in the body of the while() loop
* tmp is used only for RPI_FWREQ_SET_POWER_STATE (and is badly named)
Declare these variables in the scope where they're needed, so the code
is easier to read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-5-peter.maydell@linaro.org
In the long function bcm2835_property_mbox_push(), the variables
start_num, number and otp_row are used only in the four cases which
access OTP data, and their uses don't overlap with each other.
Make these variables have scope restricted to the cases where they're
used, so it's easier to read each individual case without having to
cross-refer up to the variable declaration at the top of the function
and check whether the variable is also used later in the loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-4-peter.maydell@linaro.org
Coverity points out that in our handling of the property
RPI_FWREQ_SET_CUSTOMER_OTP we have a potential overflow. This
happens because we read start_num and number from the guest as
unsigned 32 bit integers, but then the variable 'n' we use as a loop
counter as we iterate from start_num to start_num + number is only an
"int". That means that if the guest passes us a very large start_num
we will interpret it as negative. This will result in an assertion
failure inside bcm2835_otp_set_row(), which checks that we didn't
pass it an invalid row number.
A similar issue applies to all the properties for accessing OTP rows
where we are iterating through with a start and length read from the
guest.
Use uint32_t for the loop counter to avoid this problem. Because in
all cases 'n' is only used as a loop counter, we can do this as
part of the for(), restricting its scope to exactly where we need it.
Resolves: Coverity CID 1549401
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-3-peter.maydell@linaro.org
The documentation of the "Set palette" mailbox property at
https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface#set-palette
says it has the form:
Length: 24..1032
Value:
u32: offset: first palette index to set (0-255)
u32: length: number of palette entries to set (1-256)
u32...: RGBA palette values (offset to offset+length-1)
We get this wrong in a couple of ways:
* we aren't checking the offset and length are in range, so the guest
can make us spin for a long time by providing a large length
* the bounds check on our loop is wrong: we should iterate through
'length' palette entries, not 'length - offset' entries
Fix the loop to implement the bounds checks and get the loop
condition right. In the process, make the variables local to
this switch case, rather than function-global, so it's clearer
what type they are when reading the code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240723131029.1159908-2-peter.maydell@linaro.org
The previous implementation for EXTI interrupts only handled
"configurable" interrupts, like those originating from STM32L4x5 SYSCFG
(the only device currently connected to the EXTI up until now).
In order to connect STM32L4x5 USART to the EXTI, this commit adds
handling for direct interrupts (interrupts without configurable edge).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240707085927.122867-3-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current implementation of bcm2835_thermal_ops sets
impl.max_access_size and valid.min_access_size to 4, but leaves
impl.min_access_size and valid.max_access_size unset, defaulting to 1.
This causes issues when the memory system is presented with an access
of size 2 at an offset of 3, leading to an attempt to synthesize it as
a pair of byte accesses at offsets 3 and 4, which trips an assert.
Additionally, the lack of valid.max_access_size setting causes another
issue: the memory system tries to synthesize a read using a 4-byte
access at offset 3 even though the device doesn't allow unaligned
accesses.
This patch addresses these issues by explicitly setting both
impl.min_access_size and valid.max_access_size to 4, ensuring proper
handling of access sizes.
Error log:
ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Bail out! ERROR:hw/misc/bcm2835_thermal.c:55:bcm2835_thermal_read: code should not be reached
Aborted
Reproducer:
cat << EOF | qemu-system-aarch64 -display \
none -machine accel=qtest, -m 512M -machine raspi3b -m 1G -qtest stdio
readw 0x3f212003
EOF
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240702154042.3018932-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
-----BEGIN PGP SIGNATURE-----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=LxwO
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into staging
aspeed queue:
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7
# 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6
# ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN
# ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN
# F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK
# B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y
# O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz
# 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA
# Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG
# OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd
# XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr
# DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao=
# =LxwO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu:
hw/net:ftgmac100: fix coding style
aspeed/sdmc: Remove extra R_MAIN_STATUS case
aspeed/soc: Fix possible divide by zero
aspeed/sdmc: Check RAM size value at realize time
aspeed: Deprecate the tacoma-bmc machine
hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----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=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Coverity reports that the newly added 'case R_MAIN_STATUS' is DEADCODE
because it can not be reached. This is because R_MAIN_STATUS is handled
before in the "Unprotected registers" switch statement. Remove it.
Fixes: Coverity CID 1547112
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The RAM size of the SDMC device is validated for the SoC and set when
the Aspeed machines are initialized and then later used by several
SoC implementations. However, the SDMC model never checks that the RAM
size has been actually set before being used. Do that at realize.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Jamin_lin < jamin_lin@aspeedtech.com>
hw/hw.h only contains the prototype of hw_error() nowadays, so
files that don't use this function don't need to include this
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240701132649.58345-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-5-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The different components of pvpanic duplicate the list of supported
events. Move it to the shared header file to minimize changes when new
events are added.
MST: tweak: keep header included in pvpanic.c to avoid header
dependency, rebase.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-3-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
boot-mode property sets user values into BOOT_MODE register, on hardware
these are derived from board switches.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Exynos4210 RNG module requires 32-bit (4-byte) accesses to its registers.
According to the User Manual Section 25.3[1], the registers for RNG operations
are 32-bit. This change ensures that the memory region operations for the
RNG module enforce the correct access sizes, preventing invalid memory accesses.
[1] http://www.mediafire.com/view/8ly2fqls3c9c31c/Exynos_4412_SCP_Users_Manual_Ver.0.10.00_Preliminary0.pdf
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine smdkc210 -qtest stdio
readb 0x10830454
EOF
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240618163701.3204975-1-zheyuma97@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AST2700 have two SCU controllers which are SCU and SCUIO.
Both SCU and SCUIO registers are not compatible previous SOCs
, introduces new registers and adds ast2700 scu, sucio class init handler.
The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and
the pclk divider selection of SCU is defined in SCU280[25:23].
Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function
and trace-event for AST2700 SCU and SCUIO.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[clg: Fixed spelling : Unhandeled -> Unhandled ]
The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Fix coding style issues from checkpatch.pl
Test command:
scripts/checkpatch.pl --no-tree -f hw/misc/aspeed_sdmc.c
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
These macros are no longer used for ASPEED SOCs, so removes them.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linux has <misc/pvpanic.h>, not <linux/pvpanic.h>. Use the same
directory for QEMU's include/standard-headers/ copy.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Directly calling exit() prevents any kind of management or handling.
Instead use the corresponding runstate API.
The default behavior of the runstate API is the same as exit().
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240523-debugexit-v1-1-d52fcaf7bf8b@t-8ch.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Log a guest error instead of a hardware error when
the guest tries to DMA to / from an invalid address.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-3-cfriedt@meta.com>
[thuth: Add missing #include statement, fix error reported by checkpatch.pl]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This serves to make the local variables a bit less ambiguous.
The latter two arguments are named to match DMA_START, and
DMA_SIZE.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Message-ID: <20221018122551.94567-2-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the case that size1 was zero, because of the explicit
'end1 > addr' check, the range check would fail and the error
message would read as shown below. The correct comparison
is 'end1 >= addr'.
EDU: DMA range 0x40000-0x3ffff out of bounds (0x40000-0x40fff)!
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1254
Signed-off-by: Chris Friedt <cfriedt@meta.com>
[thuth: Adjust patch with regards to the "end1 <= end2" check]
Message-ID: <20221018122551.94567-1-cfriedt@meta.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1,
resulting in painful developer experience. Use snprintf() instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240411104340.6617-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Have applesmc_find_key() return a const pointer.
Since the returned buffers are not modified in
applesmc_io_data_write(), it is pointless to
delete and re-add the keys in the DeviceReset
handler. Add them once in DeviceRealize, and
discard them in the DeviceUnrealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240410180819.92332-1-philmd@linaro.org>
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
The npcm7xx_clk and npcm7xx_gcr device reset methods look at
the ResetType argument and only handle RESET_TYPE_COLD,
producing a warning if another reset type is passed. This
is different from how every other three-phase-reset method
we have works, and makes it difficult to add new reset types.
A better pattern is "assume that any reset type you don't know
about should be handled like RESET_TYPE_COLD"; switch these
devices to do that. Then adding a new reset type will only
need to touch those devices where its behaviour really needs
to be different from the standard cold reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-2-peter.maydell@linaro.org
AppleSMCData is allocated with g_new0() in applesmc_add_key():
release it with g_free().
Leaked since commit 1ddda5cd36 ("AppleSMC device emulation").
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2272
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240408095217.57239-3-philmd@linaro.org>
QDev core layer always call DeviceReset() after DeviceRealize(),
no need to do it manually. Remove the extra call.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240408095217.57239-2-philmd@linaro.org>
The "clock_set_mul_div" function doesn't propagate the clock period
to the children if it is changed (e.g. by enabling/disabling a clock
multiplexer).
This was overlooked during the implementation due to late changes.
This commit propagates the change if the multiplier or divider changes.
Fixes: ec7d83acbd ("hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object")
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-ID: <20240317103918.44375-2-arnaud.minier@telecom-paris.fr>
[PMD: Check clock_set_mul_div() return value]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-4-philmd@linaro.org>
Trivial inlining in preliminary patch to make the next
one easier to review.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-3-philmd@linaro.org>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in trng_prop_fault_event_set, @errp is dereferenced without
ERRP_GUARD():
visit_type_uint32(v, name, events, errp);
if (*errp) {
return;
}
Currently, since trng_prop_fault_event_set() doesn't get the NULL @errp
parameter as a "set" method of object property, it hasn't triggered the
bug that dereferencing the NULL @errp.
And since visit_type_uint32() returns bool, check the returned bool
directly instead of dereferencing @errp, then we needn't the add missing
ERRP_GUARD().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223085653.1255438-5-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The ivshmem_common_realize() passes @errp to error_prepend(), and as a
DeviceClass.realize method, there are too many possible callers to check
the impact of this defect; it may or may not be harmless. Thus it is
necessary to protect @errp with ERRP_GUARD().
To avoid the issue like [1] said, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Juan Quintela <quintela@trasno.org>
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Cc: Michael Galaxy <mgalaxy@akamai.com>
Cc: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-17-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add write protections for the fields in the CR register.
PLL configuration write protections (among others) have not
been handled yet. This is planned in a future patch set.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-7-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Update the RCC state and propagate frequency changes when writing to the
RCC registers. Currently, ICSCR, CIER, the reset registers and the stop
mode registers are not implemented.
Some fields have not been implemented due to uncertainty about
how to handle them (Like the clock security system or bypassing
mecanisms).
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-6-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the whole clock tree and using the Clock multiplexers and
the PLLs defined in the previous commits. This allows to statically
define the clock tree and easily follow the clock signal from one end to
another.
Also handle three-phase reset now that we have defined a known base
state for every object.
(Reset handling based on hw/misc/zynq_sclr.c)
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
