cryptsetup recently increased the default pbkdf2 time to 2 seconds
to partially mitigate improvements in hardware performance wrt
brute-forcing the pbkdf algorithm. This updates QEMU defaults to
match.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When calculating iterations for pbkdf of the key slot
data, we had a /= 2, which was copied from identical
code in cryptsetup. It was always unclear & undocumented
why cryptsetup had this division and it was recently
removed there, too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when timing the pbkdf algorithm a fixed key
size of 32 bytes is used. This results in inaccurate
timings for certain hashes depending on their digest
size. For example when using sha1 with aes-256, this
causes us to measure time for the master key digest
doing 2 sha1 operations per iteration, instead of 1.
Instead we should pass in the desired key size to the
timing routine that matches the key size that will be
used for real later.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'out' buffer will hold a key derived from master
password, so it is best practice to clear this buffer
when no longer required.
At this time, the code isn't worrying about locking
buffers into RAM to prevent swapping sensitive data
to disk.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qcrypto_pbkdf_count_iters method uses a 64 bit int
but then checks its value against INT32_MAX before
returning it. This bounds check is premature, because
the calling code may well scale the iteration count
by some value. It is thus better to return a 64-bit
integer and let the caller do range checking.
For consistency the qcrypto_pbkdf method is also changed
to accept a 64bit int, though this is somewhat academic
since nettle is limited to taking an 'int' while gcrypt
is limited to taking a 'long int'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- a fix for a regression introduced in 2.7
- basic functional testing for virtio-9p
- some code cleanups for 9pfs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlffsoEACgkQAvw66wEB28Lw8wCgojmICLgnE5foLIdW9dW5nodK
8B0AnAxj0jIYdc2WN5DrFcTrcaSea5KN
=Rhkz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
This pull request contains:
- a fix for a regression introduced in 2.7
- basic functional testing for virtio-9p
- some code cleanups for 9pfs
# gpg: Signature made Mon 19 Sep 2016 10:40:17 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: fix potential segfault during walk
tests: virtio-9p: add basic configuration test
tests: virtio-9p: introduce start/stop functions
9pfs: introduce v9fs_path_sprintf() helper
9pfs: drop useless v9fs_string_null() function
9pfs: drop duplicate line in proxy backend
9pfs: drop unused fmt strings in the proxy backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the call to fid_to_qid() returns an error, we will call v9fs_path_free()
on uninitialized paths.
It is a regression introduced by the following commit:
56f101ecce 9pfs: handle walk of ".." in the root directory
Let's fix this by initializing dpath and path before calling fid_to_qid().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[groug: updated the changelog to indicate this is regression and to provide
the offending commit SHA1]
Signed-off-by: Greg Kurz <groug@kaod.org>
Fixup some typos and whitespace damage introduced by the CPU model
patches for s390.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We have everything needed for virtio-ccw revision 2 wired up now.
Bump the maximum supported revision reported on a device basis to
the guest so they can make use of it.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds the response to the READ_STATUS CCW command.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Some files used by s390 KVM code were missing in MAINTAINERS. Add
them.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
cpu model was merged with 2.8, it is wrong to abuse ri_allowed which
was enabled with 2.7.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Except virtio-9p, all virtio-* tests are orphan. This patch tries to fix
it, according to the following logic:
- when the related subsystem has its own section in MAINTAINERS, the test
is added there
- otherwise it is added to the "parent" section (aka. SCSI, Network devices,
virtio)
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX3AxMAAoJEK0ScMxN0CebW1MIAMcmQ31/Za4/9H5PQdTs1rVh
GuK3HKK8jiTIvr8RGLMPZT3439rYm45axHIgoUx82UMcu2UkWuxFkt0KhMd6dnDY
Y5YeFeuYDhq0L84iXP54UVKsI3ePy6TwuoDNc+KRzT5vxyRWWmfm5s4V8b2dj+L0
FhS7w+qs0nio58ptX7C65KBJEuWSSQRoO3d8me/c77GVK2hgW6oOoul+E0BN1Xip
+02BThRZJNaaoeRgHK29UNHj0DWZErOxq/Ti82rSmLy3TjKGKav9GRPb5I8nIjEt
nNHgB+N+qlv45h/WELa+dxLXfbLwUX6hultTp0vA+nrCIqdeiGQcMeVgz2F9zmo=
=zDXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20160916' into staging
tcg queued patches
# gpg: Signature made Fri 16 Sep 2016 16:14:20 BST
# gpg: using RSA key 0xAD1270CC4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
# Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B
* remotes/rth/tags/pull-tcg-20160916:
tcg: Optimize fence instructions
target-i386: Generate fences for x86
target-aarch64: Generate fences for aarch64
target-arm: Generate fences in ARMv7 frontend
target-alpha: Generate fence op
tcg/tci: Add support for fence
tcg/sparc: Add support for fence
tcg/s390: Add support for fence
tcg/ppc: Add support for fence
tcg/mips: Add support for fence
tcg/ia64: Add support for fence
tcg/arm: Add support for fence
tcg/aarch64: Add support for fence
tcg/i386: Add support for fence
Introduce TCGOpcode for memory barrier
cpu-exec: Check -dfilter for -d cpu
tcg: Merge GETPC and GETRA
tcg: Support arbitrary size + alignment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit optimizes fence instructions. Two optimizations are
currently implemented: (1) unnecessary duplicate fence instructions,
and (2) merging weaker fences into a stronger fence.
[rth: Merge tcg_optimize_mb back into tcg_optimize, so that we only
loop over the opcode stream once. Merge "unrelated" weaker barriers
into one stronger barrier.]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160823134825.32578-1-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160714202026.9727-11-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Generate a 'lock orl $0,0(%esp)' instruction for ordering instead of
mfence which has similar ordering semantics.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160714202026.9727-3-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This commit introduces the TCGOpcode for memory barrier instruction.
This opcode takes an argument which is the type of memory barrier
which should be generated.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160714202026.9727-2-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The return address argument to the softmmu template helpers was
confused. In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL. However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.
Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.
This makes GETPC and GETRA identical. Remove GETRA as the lesser
used macro, replacing all uses with GETPC.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously we allowed fully unaligned operations, but not operations
that are aligned but with less alignment than the operation size.
In addition, arm32, ia64, mips, and sparc had been omitted from the
previous overalignment patch, which would have led to that alignment
being enforced.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This adds PCI init code and a basic test that checks the device config
matches what is passed on the command line.
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This helper is similar to v9fs_string_sprintf(), but it includes the
terminating NUL character in the size field.
This is to avoid doing v9fs_string_sprintf((V9fsString *) &path) and
then bumping the size.
Affected users are changed to use this new helper.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The v9fs_string_null() function just calls v9fs_string_free(). Also it
only has 4 users, whereas v9fs_string_free() has 87.
This patch converts users to call directly v9fs_string_free() and drops
the useless function.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This double free did not cause harm because v9fs_string_free() sets
str->data to NULL and g_free(NULL) is valid.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The v9fs_request() function doesn't use its fmt argument: it passes literal
format strings to proxy_marshal() for all commands.
This patch simply drops the unused fmt argument and updates all callers
accordingly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1373802
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Fixes: d1f6af6a17 ("kvm-irqchip: simplify kvm_irqchip_add_msi_route")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
VMState added by this patch preserves correct
loading of the PC speaker device state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090133.6440.65457.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes kvmvapic state change handler.
It clears vmsentry field to allow recreating it
at further vmstate loads.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090127.6440.48793.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new APIC macro to replace APIC_COMMON macro in
hw/intc/apic.c in order to capture access LAPIC in qemu
even if LAPIC is emulated in kvm.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473923759-13912-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
