cURL 7.16.0 was released in October 2006. Just remove code that is
in all likelihood not being used anywhere, and require the oldest version
found in currently supported distros, which is 7.29.0 from CentOS 7.
pkg-config is enough for QEMU, since it does not need extra information
such as the path for certicate authorities. All supported platforms
today will all have pkg-config for curl, so we can drop curl-config.
Suggested-by: Daniel Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
version.rc can just use existing preprocessor symbols.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson understands -Dslirp=enabled, so there is no reason not to
accept the configure option as well.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The condition can be tested also from $targetos, clean up.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson.build is already doing the same check, so remove it from
configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build the array of command line arguments coming from config_host
once for all targets. Add all accelerators to accel/Kconfig so
that the command line arguments for accelerators can be computed
easily in the existing "foreach sym: accelerators" loop.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows converting the dependencies to meson options one by one.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has been a tcg-specific function, but is also in use
by hardware accelerators via physmem.c. This can cause
link errors when tcg is disabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable removing tcg/$tcg_arch from the include path when TCG is disabled.
Move translate-all.h to include/exec, since stubs exist for the functions
defined therein.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix linking vhost-user binaries with with ./configure -static, by
overriding glib-2.0 dependency with configure results.
Fixes: 0df750e9d3 ("libvhost-user: make it a meson subproject")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201215080319.136228-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document how to compile with CFI and how to maintain CFI-safe code
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-6-dbuono@linux.vnet.ibm.com>
[Make build system section in index.rst and add the new file. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a flag to enable/disable control flow integrity checks
on indirect function calls.
This feature only allows indirect function calls at runtime to functions
with compatible signatures.
This feature is only provided by LLVM/Clang, and depends on link-time
optimization which is currently supported only with LLVM/Clang >= 6.0
We also add an option to enable a debugging version of cfi, with verbose
output in case of a CFI violation.
CFI on indirect function calls does not support calls to functions in
shared libraries (since they were not known at compile time), and such
calls are forbidden. QEMU relies on dlopen/dlsym when using modules,
so we make modules incompatible with CFI.
All the checks are performed in meson.build. configure is only used to
forward the flags to meson
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-5-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cfi-icall is a form of Control-Flow Integrity for indirect function
calls implemented by llvm. It is enabled with a -fsanitize flag.
iotests are currently disabled when -fsanitize options is used, with the
exception of SafeStack.
This patch implements a generic filtering mechanism to allow iotests
with a set of known-to-be-safe -fsanitize option. Then marks SafeStack
and the new options used for cfi-icall safe for iotests
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-4-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LLVM/Clang, supports runtime checks for forward-edge Control-Flow
Integrity (CFI).
CFI on indirect function calls (cfi-icall) ensures that, in indirect
function calls, the function called is of the right signature for the
pointer type defined at compile time.
For this check to work, the code must always respect the function
signature when using function pointer, the function must be defined
at compile time, and be compiled with link-time optimization.
This rules out, for example, shared libraries that are dynamically loaded
(given that functions are not known at compile time), and code that is
dynamically generated at run-time.
This patch:
1) Introduces the CONFIG_CFI flag to support cfi in QEMU
2) Introduces a decorator to allow the definition of "sensitive"
functions, where a non-instrumented function may be called at runtime
through a pointer. The decorator will take care of disabling cfi-icall
checks on such functions, when cfi is enabled.
3) Marks functions currently in QEMU that exhibit such behavior,
in particular:
- The function in TCG that calls pre-compiled TBs
- The function in TCI that interprets instructions
- Functions in the plugin infrastructures that jump to callbacks
- Functions in util that directly call a signal handler
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org
Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows to compile QEMU with link-time optimization (LTO).
Compilation with LTO is handled directly by meson. This patch only
adds the option in configure and forwards the request to meson
Tested with all major versions of clang from 6 to 12
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-2-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the 'int N' instruction is executed in protected mode, the
pseudocode in the architecture manual specifies that we need to check:
* vector number within IDT limits
* selected IDT descriptor is a valid type (interrupt, trap or task gate)
* if this was a software interrupt then gate DPL < CPL
The way we had structured the code meant that the privilege check for
software interrupts ended up not in the code path taken for task gate
handling, because all of the task gate handling code was in the 'case 5'
of the switch which was checking "is this descriptor a valid type".
Move the task gate handling code out of that switch (so that it is now
purely doing the "valid type?" check) and below the software interrupt
privilege check.
The effect of this missing check was that in a guest userspace binary
executing 'int 8' would cause a guest kernel panic rather than the
userspace binary being handed a SEGV.
This is essentially the same bug fixed in VirtualBox in 2012:
https://www.halfdog.net/Security/2012/VirtualBoxSoftwareInterrupt0x8GuestCrash/
Note that for QEMU this is not a security issue because it is only
present when using TCG.
Fixes: https://bugs.launchpad.net/qemu/+bug/1813201
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201121224445.16236-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
QOM reference counting bugs are often hard to detect, but there's
one kind of bug that's easier: if we are freeing an object but is
still attached to a parent, it means the reference count is wrong
(because the parent always hold a reference to their children).
Add an assertion to make sure we detect those cases.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201215224133.3545901-3-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 1e419ee68f ("chardev: generate an internal id when none
given") changed the reference ownership semantics of
qemu_chardev_new(NULL, ...): now all chardevs created using
qemu_chardev_new() are added to the /chardevs QOM container, and
the caller does not own a reference to the newly created object.
However, the code at char_file_test_internal() had not been
updated and was calling object_unref() on a chardev object it
didn't own. This makes the chardev be destroyed, but leaves a
dangling pointer in the /chardev container children list, and
seems to be the cause of the following char_serial_test() crash:
Unexpected error in object_property_try_add() at ../qom/object.c:1220: \
attempt to add duplicate property 'serial-id' to object (type 'container')
ERROR test-char - too few tests run (expected 38, got 9)
Update the code to use object_unparent() at the end of
char_file_test_internal(), to make sure the chardev will be
correctly removed from the QOM tree.
Fixes: 1e419ee68f ("chardev: generate an internal id when none given")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20201215224133.3545901-2-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to the renumbering of text consoles when graphical consoles are
created, init_displaystate must be called after all QemuConsoles are
created, i.e. after devices are created.
vl.c calls it from qemu_init_displays, while qmp_x_exit_preconfig is
where devices are created. If qemu_init_displays is called before it,
the VGA graphical console does not come up.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Debian 9 containers have been removed a while ago, so we can
delete the corresponding entries in the Makefile, too.
Fixes: e3755276d1 ("tests/docker: Remove old Debian 9 containers")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201215083318.92205-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
After adding some missing packages, it's possible to check 32-bit
builds and tests with the fedora-i386-cross container in the gitlab-CI,
too. Unfortunately, the code in subprojects/ ignores the --extra-cflags
(on purpose), so the vhost-user part has to be disabled for this.
While we're at it, update the container to Fedora 31. Unfortunately the
gcc from the later versions emits some very dubious format-truncation
warnings, so Fedora 32 and 33 are currently unsuitable for this job.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201215083451.92322-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Hopefully this will guard against sloppy code getting into our tests.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201210190417.31673-9-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210190417.31673-8-alex.bennee@linaro.org>
While attempting to debug some console weirdness I thought it would be
worth making it easier to see what it had inside.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201210190417.31673-6-alex.bennee@linaro.org>
By default QEMU enables a lot of features if it can probe and find the
support libraries. It also enables a bunch of features by default.
This patch adds the ability to build --without-default-features which
can be paired with a --without-default-devices for a barely functional
build.
The main use case for this is testing our build assumptions and for
minimising the amount of stuff you build if you just want to test a
particular feature on your relatively slow emulated test system. On
it's own I go from:
$ ls -lh qemu-system-aarch64
-rwxr-xr-x 1 alex alex 120M Dec 10 12:45 qemu-system-aarch64*
$ ldd qemu-system-aarch64 | wc -l
170
to:
$ ls -lh qemu-aarch64
-rwxr-xr-x 1 alex alex 43M Dec 10 12:41 qemu-aarch64*
$ ldd qemu-system-aarch64 | wc -l
57
which is still able to run my default Debian ARM64 machine with a lot
less fat involved.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201210190417.31673-5-alex.bennee@linaro.org>
This will allow meson to honour -Dauto_features=disabled later.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201210190417.31673-4-alex.bennee@linaro.org>
Otherwise we miss coverage of KVM support in the cross build. To
balance it out add arm-softmmu (no kvm, subset of aarch64),
cris-softmmu and ppc-softmmu to the exclude list which do get coverage
elsewhere.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201210190417.31673-3-alex.bennee@linaro.org>
