Commit Graph

2498 Commits

Author SHA1 Message Date
Juan Quintela
7b24d32634 migration: skipped field is really obsolete.
Has return zero for more than 10 years.

Specifically we introduced the field in 1.5.0

commit f1c72795af
Author: Peter Lieven <pl@kamp.de>
Date:   Tue Mar 26 10:58:37 2013 +0100

    migration: do not sent zero pages in bulk stage

    during bulk stage of ram migration if a page is a
    zero page do not send it at all.
    the memory at the destination reads as zero anyway.

    even if there is an madvise with QEMU_MADV_DONTNEED
    at the target upon receipt of a zero page I have observed
    that the target starts swapping if the memory is overcommitted.
    it seems that the pages are dropped asynchronously.

    this patch also updates QMP to return the number of
    skipped pages in MigrationStats.

but removed its usage in 1.5.3

commit 9ef051e553
Author: Peter Lieven <pl@kamp.de>
Date:   Mon Jun 10 12:14:19 2013 +0200

    Revert "migration: do not sent zero pages in bulk stage"

    Not sending zero pages breaks migration if a page is zero
    at the source but not at the destination. This can e.g. happen
    if different BIOS versions are used at source and destination.
    It has also been reported that migration on pseries is completely
    broken with this patch.

    This effectively reverts commit f1c72795af.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230612193344.3796-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-07-26 10:55:56 +02:00
Peter Maydell
76e6a2ca9e Fourth RISC-V PR for 8.1
* Fix LMUL check to use VLEN
 * Fix typo field in NUMA error_report
 * check priv_ver before auto-enable zca/zcd/zcf
 * Fix disas output of upper immediates
 * tidy CPU firmware section
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmS3akMACgkQr3yVEwxT
 gBPQ/BAArrieEkrRco3tIQJFZqTLfII28M0cYdwN+gjMAkL6RlauCh5yKkc+gsGy
 bhhpr0AE+EzrjKfJgdyMQe2ZH08WEpoAfJHAmLTSm2ktgIlnDAjyJtVksZ3FSwfG
 MRK3v0CChyOav3EfDZzK9jcaXeaSSfjCIG8JW3enoZxf2TnpoXlsCIQdRTnMw7Um
 C73BWoOGOfixFehywHBnkkAPo/nkQPofELrRKNTlefAIsH1RcgYw+s3IgCIuYxJN
 zCjM1y6ye1aiaQhKcNJiLoiP4Eq2R6vUuL8RKWkXqTP3QBZUqKMPnRVgI+W0qRAj
 9DS+l37zMdxytovQ4gmIqnENT8ty9bholOtWM8nI54subJBplQhkRednG3RBFYjH
 hqbsakcHfE1lyyNI7WoBpO8UMtnOad6eBNmMOM48VduSdNuBZN3ksoRVomnJTlCY
 nq1ZdteywHEZ3uBqk3k/4yzKH+jLj0McPz5FswxsMIGScVjd6H8rMYmM95r1He4k
 YTJ8GwnOTBs1tFxOz5DaM3BVfq5hrzB0SbpDHMOdQHNXnqkyfvSd/QWeXfnY09Ux
 kbNvSpzjn7wWRSP7s4KMcTmas4oGtPS2dheREB/gmoC1ubrfuhbzduDNXJt+omuC
 GDcn9cpouyE/Vp/358PuEe1gW9GFMH0CbYBJ66P0hI/76iPfwLY=
 =MOsI
 -----END PGP SIGNATURE-----

Merge tag 'pull-riscv-to-apply-20230719-1' of https://github.com/alistair23/qemu into staging

Fourth RISC-V PR for 8.1

* Fix LMUL check to use VLEN
* Fix typo field in NUMA error_report
* check priv_ver before auto-enable zca/zcd/zcf
* Fix disas output of upper immediates
* tidy CPU firmware section

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmS3akMACgkQr3yVEwxT
# gBPQ/BAArrieEkrRco3tIQJFZqTLfII28M0cYdwN+gjMAkL6RlauCh5yKkc+gsGy
# bhhpr0AE+EzrjKfJgdyMQe2ZH08WEpoAfJHAmLTSm2ktgIlnDAjyJtVksZ3FSwfG
# MRK3v0CChyOav3EfDZzK9jcaXeaSSfjCIG8JW3enoZxf2TnpoXlsCIQdRTnMw7Um
# C73BWoOGOfixFehywHBnkkAPo/nkQPofELrRKNTlefAIsH1RcgYw+s3IgCIuYxJN
# zCjM1y6ye1aiaQhKcNJiLoiP4Eq2R6vUuL8RKWkXqTP3QBZUqKMPnRVgI+W0qRAj
# 9DS+l37zMdxytovQ4gmIqnENT8ty9bholOtWM8nI54subJBplQhkRednG3RBFYjH
# hqbsakcHfE1lyyNI7WoBpO8UMtnOad6eBNmMOM48VduSdNuBZN3ksoRVomnJTlCY
# nq1ZdteywHEZ3uBqk3k/4yzKH+jLj0McPz5FswxsMIGScVjd6H8rMYmM95r1He4k
# YTJ8GwnOTBs1tFxOz5DaM3BVfq5hrzB0SbpDHMOdQHNXnqkyfvSd/QWeXfnY09Ux
# kbNvSpzjn7wWRSP7s4KMcTmas4oGtPS2dheREB/gmoC1ubrfuhbzduDNXJt+omuC
# GDcn9cpouyE/Vp/358PuEe1gW9GFMH0CbYBJ66P0hI/76iPfwLY=
# =MOsI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jul 2023 05:44:51 BST
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230719-1' of https://github.com/alistair23/qemu:
  target/riscv: Fix LMUL check to use VLEN
  hw/riscv: Fix typo field in error_report
  target/riscv/cpu.c: check priv_ver before auto-enable zca/zcd/zcf
  riscv/disas: Fix disas output of upper immediates
  docs/system/target-riscv.rst: tidy CPU firmware section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-19 13:42:17 +01:00
Daniel Henrique Barboza
542c8776ca docs/system/target-riscv.rst: tidy CPU firmware section
This is how the content of the "RISC-V CPU firmware" section is
displayed after the html is generated:

"When using the sifive_u or virt machine there are three different
firmware boot options: 1. -bios default - This is the default behaviour
if no -bios option is included. (...) 3. -bios <file> - Tells QEMU to
load the specified file as the firmware."

It's all in the same paragraph, in a numbered list, and no special
formatting for the options.

Tidy it a bit by adding line breaks between items and its description.
Remove the numbered list. And apply formatting for the options cited in
the middle of the text.

Cc: qemu-trivial@nongnu.org
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230712143728.383528-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-19 14:30:04 +10:00
Thomas Huth
a5754847e0 tests/avocado: Disable the test_sbsaref_edk2_firmware by default
The test fails occasionally, see e.g.:

 https://gitlab.com/thuth/qemu/-/jobs/4196177756#L489
 https://gitlab.com/thuth/qemu/-/jobs/4623296271#L290

It also fails on my laptop in ca. 50% of all runs. Thus disable it by
default by using the QEMU_TEST_FLAKY_TESTS environment variable to fence
it (which we also already use in flaky qtests). While we're at it, also
document this variable in docs/devel/testing.rst.

Message-Id: <20230710170155.7192-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-18 11:22:51 +02:00
Richard Henderson
2bb9d628a7 pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
 vhost-user-scmi device
 vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
 
 cleanups, fixes all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
 qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
 D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
 n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
 cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
 UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
 =RsOh
 -----END PGP SIGNATURE-----

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,pci,virtio: cleanups, fixes, features

vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq

cleanups, fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
  vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
  vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
  vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
  vdpa: Avoid forwarding large CVQ command failures
  vdpa: Accessing CVQ header through its structure
  vhost: Fix false positive out-of-bounds
  vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
  vdpa: Restore MAC address filtering state
  vdpa: Use iovec for vhost_vdpa_net_load_cmd()
  pcie: Specify 0 for ARI next function numbers
  pcie: Use common ARI next function number
  include/hw/virtio: document some more usage of notifiers
  include/hw/virtio: add kerneldoc for virtio_init
  include/hw/virtio: document virtio_notify_config
  hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
  include/hw: document the device_class_set_parent_* fns
  include: attempt to document device_class_set_props
  vdpa: Fix possible use-after-free for VirtQueueElement
  pcie: Add hotplug detect state register to cmask
  virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-11 09:33:12 +01:00
Akihiko Odaki
445416e301 pcie: Use common ARI next function number
Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10 18:59:32 -04:00
Richard Henderson
adc97c4b80 qga-pull-2023-07-10
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmSsBN8ACgkQ711egWG6
 hOfGzw/9HJl1sQQQWO/Nv3HOtiC7Nnk3d06Wx8nC3d3L4fyDDsyCm1gBQK2YX6x5
 jlDCwgf28DoSDgvznyRvoUrDaQ4QBwcd2Xc5ukQRxZ4K2zEfWjp/NI7AWzUxQ2ID
 G1dAWrnY94qm8vkkjAV6ABpDZNMWQlahwcABG8S5rFWaIqv+TSsFD9qRbrcA/LsJ
 hKbcGSuWEzQSYcFD4ctGbQP4JgQQOO5Yk/3S7PO0+j/04vaYoers/9ZhRc8WhxGs
 WAqxMdmUMcuYU0VkDLRVaGfJ5TrlHqm/iHz9UnTNbWekGjeNiEMyGN3shWCKN2AE
 mMXU2zd74dBdMhwIzSlz7MW0XuX3TLrI3DZ9W7lY+8FfafQi8Dd2FPfPdKNDhEp0
 NQ8N/W6LAXPkVWci3uSvw50K+Q0svWee6mZV3qI6DbD1a8dRKvlFvvL7FCvHt8eF
 7YIHanJEzHbday31dhaRBBDn0EehBsFiJVImyfKBrMxGPfhTva+rH4KWKIW2pGfU
 3Sqk3KJ+c0Byh1Rkv6LTeYQSUV4x/fwve/EnvBhau1CyuoFSR0/Eoyqzi3aX3koL
 Ord9BUGgmEc3TzDj0LhonEWnlWmNcUm/ck9dZTkYcDWyLLaArJ5pW9iUU9eh9Vx/
 56r3/Jyz4QM6CjFmWWGEsEFMrM0wMGxl9JQKRcc39Eo2GpgWtuI=
 =zeI3
 -----END PGP SIGNATURE-----

Merge tag 'qga-pull-2023-07-10' of https://github.com/kostyanf14/qemu into staging

qga-pull-2023-07-10

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmSsBN8ACgkQ711egWG6
# hOfGzw/9HJl1sQQQWO/Nv3HOtiC7Nnk3d06Wx8nC3d3L4fyDDsyCm1gBQK2YX6x5
# jlDCwgf28DoSDgvznyRvoUrDaQ4QBwcd2Xc5ukQRxZ4K2zEfWjp/NI7AWzUxQ2ID
# G1dAWrnY94qm8vkkjAV6ABpDZNMWQlahwcABG8S5rFWaIqv+TSsFD9qRbrcA/LsJ
# hKbcGSuWEzQSYcFD4ctGbQP4JgQQOO5Yk/3S7PO0+j/04vaYoers/9ZhRc8WhxGs
# WAqxMdmUMcuYU0VkDLRVaGfJ5TrlHqm/iHz9UnTNbWekGjeNiEMyGN3shWCKN2AE
# mMXU2zd74dBdMhwIzSlz7MW0XuX3TLrI3DZ9W7lY+8FfafQi8Dd2FPfPdKNDhEp0
# NQ8N/W6LAXPkVWci3uSvw50K+Q0svWee6mZV3qI6DbD1a8dRKvlFvvL7FCvHt8eF
# 7YIHanJEzHbday31dhaRBBDn0EehBsFiJVImyfKBrMxGPfhTva+rH4KWKIW2pGfU
# 3Sqk3KJ+c0Byh1Rkv6LTeYQSUV4x/fwve/EnvBhau1CyuoFSR0/Eoyqzi3aX3koL
# Ord9BUGgmEc3TzDj0LhonEWnlWmNcUm/ck9dZTkYcDWyLLaArJ5pW9iUU9eh9Vx/
# 56r3/Jyz4QM6CjFmWWGEsEFMrM0wMGxl9JQKRcc39Eo2GpgWtuI=
# =zeI3
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 02:17:19 PM BST
# gpg:                using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423  EB84 EF5D 5E81 61BA 84E7

* tag 'qga-pull-2023-07-10' of https://github.com/kostyanf14/qemu:
  QGA VSS: Add log in functions begin/end
  QGA VSS: Print error in err_set
  QGA VSS: Replace 'fprintf(stderr' with qga_debug
  QGA VSS: Add wrapper to send log to debugger and stderr
  qga: Add tests for --allow-rpcs option
  qga: Add new option --allow-rpcs
  qga: Rename ga_disable_not_allowed -> ga_disable_not_allowed_freeze

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10 21:43:14 +01:00
Richard Henderson
94d68c1136 Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
 * Factor out extension tests to cpu_cfg.h
 * disas/riscv: Add vendor extension support
 * disas/riscv: Add support for XVentanaCondOps
 * disas/riscv: Add support for XThead* instructions
 * Fix mstatus related problems
 * Fix veyron-v1 CPU properties
 * Fix the xlen for data address when MPRV=1
 * opensbi: Upgrade from v1.2 to v1.3
 * Enable 32-bit Spike OpenSBI boot testing
 * Support the watchdog timer of HiFive 1 rev b
 * Only build qemu-system-riscv$$ on rv$$ host
 * Add RVV registers to log
 * Restrict ACLINT to TCG
 * Add syscall riscv_hwprobe
 * Add support for BF16 extensions
 * KVM_RISCV_SET_TIMER macro is not configured correctly
 * Generate devicetree only after machine initialization is complete
 * virt: Convert fdt_load_addr to uint64_t
 * KVM: fixes and enhancements
 * Add support for the Zfa extension
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
 gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
 +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
 vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
 KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
 bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
 nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
 ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
 ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
 TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
 XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
 ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
 =3XFD
 -----END PGP SIGNATURE-----

Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 8.1

* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
  riscv: Add support for the Zfa extension
  target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
  target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
  target/riscv: update multi-letter extension KVM properties
  target/riscv/cpu.c: create KVM mock properties
  target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
  target/riscv/cpu.c: add satp_mode properties earlier
  target/riscv/kvm.c: add multi-letter extension KVM properties
  target/riscv/kvm.c: update KVM MISA bits
  target/riscv: add KVM specific MISA properties
  target/riscv/cpu: add misa_ext_info_arr[]
  target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
  target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
  target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
  target/riscv: use KVM scratch CPUs to init KVM properties
  target/riscv/cpu.c: restrict 'marchid' value
  target/riscv/cpu.c: restrict 'mimpid' value
  target/riscv/cpu.c: restrict 'mvendorid' value
  hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
  target/riscv: skip features setup for KVM CPUs
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10 21:42:50 +01:00
Erico Nunes
50cbd5b4b3 docs: vhost-user-gpu: add protocol changes for EDID
VHOST_USER_GPU_GET_EDID is defined as a message from the backend to the
frontend to retrieve the EDID data for a given scanout.

The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is defined as a way
to check whether this new message is supported or not.

Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-3-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10 16:17:07 -04:00
Thomas Huth
7233bd1223 docs/devel: Fix coding style in style.rst
As defined earlier in this file, the opening curly brace of
functions should be placed on a separate line. So we should
do it in the examples here, too.

Fixes: 821f296756 ("docs: document use of automatic cleanup functions in glib")
Reported-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20230710092638.161625-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:57 +02:00
Thomas Huth
9ffcbe2a60 os-posix: Allow 'chroot' via '-run-with' and deprecate the old '-chroot' option
We recently introduced "-run-with" for options that influence the
runtime behavior of QEMU. This option has the big advantage that it
can group related options (so that it is easier for the users to spot
them) and that the options become introspectable via QMP this way.
So let's start moving more switches into this option group, starting
with "-chroot" now.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20230703074447.17044-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:57 +02:00
Konstantin Kostiuk
133789e1bf qga: Add new option --allow-rpcs
The allow-rpcs option accepts a comma-separated list of RPCs to
enable. This option is opposite to --block-rpcs. Using --block-rpcs
and --allow-rpcs at the same time is not allowed.

resolves: https://gitlab.com/qemu-project/qemu/-/issues/1505

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
2023-07-10 15:54:40 +03:00
Philippe Mathieu-Daudé
c0716c81b2 hw/riscv/virt: Restrict ACLINT to TCG
The Advanced Core Local Interruptor (ACLINT) device can
only be used with TCG. Check for TCG enabled instead of
KVM being not. Only add the property when TCG is used.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629121103.87733-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10 22:29:15 +10:00
Nicholas Piggin
934676c7b7 ppc/pnv: SMT support for powernv
Set the TIR default value with the SMT thread index, and place some
standard limits on SMT configurations. Now powernv is able to boot
skiboot and Linux with a SMT topology, including booting a KVM guest.

There are several SPRs and other features (e.g., broadcast msgsnd)
that are not implemented, but not used by OPAL or Linux and can be
added incrementally.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07 04:47:49 -03:00
Richard Henderson
97c81ef4b8 Administrative changes only:
* Deprecate 9p 'proxy' backend.
 
 * Raise status of 9p to 'Maintained'.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmSmkAsXHHFlbXVfb3Nz
 QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5We1xAAol+HbhQ2zNCJUbZ2/WY3Jf0H
 K86DRQIs6w6UkL9msFz+id+tR5i50HoJ3+RnOKvy/fPqO8Rv6mb0d9r+bIG1JJCc
 ubHP91x/nyDbP0XbLMtmtCz/T4g67E11Qqriq7lH1bPF7ccU3iXHZNup9HARjOoE
 SQo9x4e7IDi1WdmM2vjvRXCh4ZLIlBv7c+2vAeP4V7FhJhDkL+1y+w6aCFw0xpd8
 lto3Egnhz6pk7+SJfQwCl3rfozHhCxlNmcNa+7vqckVFpdJrvtKOQB4cn9yVDPr/
 WjmYoB2J3MwYuZz+qAkdRJ6dUTLJb87YqJJe6lcKq0lqjiFBk7TccvIN9WgyJQd/
 eLUPCCyo98g9RCaPzjLc4MgbpCPCmqJkg8A1vJzykvq51BqJZcdkwfJ7LFmsvTSo
 IfR1Seq4OUUzTZ2gWh8wJBNcPpAbilHzQnumxBEupe0Dg/pwoQWCywTYJN6Yf/6+
 PzcK39bVFKrEyc4Z1Y/yXvAzD7nX8X78kSHvxYYEQfzruLIVQjUUQ7Mp3TiJvljk
 mLdcYqavjawgC2zmZU4L2Lx4Su7iVIkhNWj57WkfooSzLrAjueYQIJEltAt8Qmn6
 x3+u3xI/myNKujMpaqgTAU5Gk2J2UApshq5Zwe8HpnVwWoxS3QetXdA/f4AXwZOk
 TpnKPYQa7edPLSSAbAs=
 =GzjR
 -----END PGP SIGNATURE-----

Merge tag 'pull-9p-20230706' of https://github.com/cschoenebeck/qemu into staging

Administrative changes only:

* Deprecate 9p 'proxy' backend.

* Raise status of 9p to 'Maintained'.

# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmSmkAsXHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5We1xAAol+HbhQ2zNCJUbZ2/WY3Jf0H
# K86DRQIs6w6UkL9msFz+id+tR5i50HoJ3+RnOKvy/fPqO8Rv6mb0d9r+bIG1JJCc
# ubHP91x/nyDbP0XbLMtmtCz/T4g67E11Qqriq7lH1bPF7ccU3iXHZNup9HARjOoE
# SQo9x4e7IDi1WdmM2vjvRXCh4ZLIlBv7c+2vAeP4V7FhJhDkL+1y+w6aCFw0xpd8
# lto3Egnhz6pk7+SJfQwCl3rfozHhCxlNmcNa+7vqckVFpdJrvtKOQB4cn9yVDPr/
# WjmYoB2J3MwYuZz+qAkdRJ6dUTLJb87YqJJe6lcKq0lqjiFBk7TccvIN9WgyJQd/
# eLUPCCyo98g9RCaPzjLc4MgbpCPCmqJkg8A1vJzykvq51BqJZcdkwfJ7LFmsvTSo
# IfR1Seq4OUUzTZ2gWh8wJBNcPpAbilHzQnumxBEupe0Dg/pwoQWCywTYJN6Yf/6+
# PzcK39bVFKrEyc4Z1Y/yXvAzD7nX8X78kSHvxYYEQfzruLIVQjUUQ7Mp3TiJvljk
# mLdcYqavjawgC2zmZU4L2Lx4Su7iVIkhNWj57WkfooSzLrAjueYQIJEltAt8Qmn6
# x3+u3xI/myNKujMpaqgTAU5Gk2J2UApshq5Zwe8HpnVwWoxS3QetXdA/f4AXwZOk
# TpnKPYQa7edPLSSAbAs=
# =GzjR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Jul 2023 10:57:31 AM BST
# gpg:                using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg:                issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38  4926 30DB 47C3 A012 D5F4
#      Subkey fingerprint: 96D8 D110 CF7A F808 4F88  5901 34C2 B587 65A4 7395

* tag 'pull-9p-20230706' of https://github.com/cschoenebeck/qemu:
  MAINTAINERS: raise status of 9p to 'Maintained'
  9pfs: deprecate 'proxy' backend

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-06 18:19:42 +01:00
Peter Maydell
c74138c6c0 target/arm: Define neoverse-v1
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-06 13:30:10 +01:00
Christian Schoenebeck
71d72ececa 9pfs: deprecate 'proxy' backend
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p
'proxy' fs driver is in bad shape. Using the 'proxy' backend was already
discouraged for safety reasons before and we recommended to use the
'local' backend (preferably in conjunction with its 'mapped' security
model) instead, but now it is time to officially deprecate the 'proxy'
backend.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
2023-07-06 11:42:08 +02:00
Yuquan Wang
62c2b8760b hw/arm/sbsa-ref: use XHCI to replace EHCI
The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.

We bump the platform version to 0.3 with this change.  Although the
hardware at the USB controller address changes, the firmware and
Linux can both cope with this -- on an older non-XHCI-aware
firmware/kernel setup the probe routine simply fails and the guest
proceeds without any USB.  (This isn't a loss of functionality,
because the old USB controller never worked in the first place.) So
we can call this a backwards-compatible change and only bump the
minor version.

Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn
[PMM: tweaked commit message; add line to docs about what
 changes in platform version 0.3]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-04 14:08:47 +01:00
Ilya Leoshkevich
abf7ba310b docs: Document security implications of debugging
Now that the GDB stub explicitly implements reading host files (note
that it was already possible by changing the emulated code to open and
read those files), concerns may arise that it undermines security.

Document the status quo, which is that the users are already
responsible for securing the GDB connection themselves.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621203627.1808446-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-38-alex.bennee@linaro.org>
2023-07-03 12:52:34 +01:00
Alex Bennée
43398409ce docs/devel: introduce some key concepts for QOM development
Using QOM correctly is increasingly important to maintaining a modern
code base. However the current documentation skips some important
concepts before launching into a simple example. Lets:

  - at least mention properties
  - mention TYPE_OBJECT and TYPE_DEVICE
  - talk about why we have realize/unrealize
  - mention the QOM tree
  - lightly re-arrange the order we mention things

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-28-alex.bennee@linaro.org>
2023-07-03 12:52:26 +01:00
Alex Bennée
da966a8a7c docs/devel: split qom-api reference into new file
Lets try and keep the overview of the sub-system digestible by
splitting the core API stuff into a separate file. As QOM and QDEV
work together we should also try and enumerate the qdev_ functions.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-27-alex.bennee@linaro.org>
2023-07-03 12:52:22 +01:00
Philippe Mathieu-Daudé
307c0a4ac9 docs/devel/qom.rst: Correct code style
Per commit 067109a11c ("docs/devel: mention the spacing requirement
for QOM"):

  For a storage structure the first declaration should always be
  called “parent_obj” and for a class structure the first member
  should always be called “parent_class”

Adapt the QOM rST document accordingly.

Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230622101717.70468-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-26-alex.bennee@linaro.org>
2023-07-03 12:52:20 +01:00
Alex Bennée
8b4528c829 docs/devel: add some front matter to the devel index
Give an overview of the most useful bits of the devel documentation to
read depending on what the developer wants to do.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-23-alex.bennee@linaro.org>
2023-07-03 12:52:08 +01:00
Ani Sinha
d2ab529ec5 docs/devel: remind developers to run CI container pipeline when updating images
When new dependencies and packages are added to containers, its important to
run CI container generation pipelines on gitlab to make sure that there are no
obvious conflicts between packages that are being added and those that are
already present. Running CI container pipelines will make sure that there are
no such breakages before we commit the change updating the containers. Add a
line in the documentation reminding developers to run the pipeline before
submitting the change. It will also ease the life of the maintainers.

Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230506072012.10350-1-anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-5-alex.bennee@linaro.org>
2023-07-03 12:51:18 +01:00
Avihai Horon
745c42912a vfio/migration: Add support for switchover ack capability
Loading of a VFIO device's data can take a substantial amount of time as
the device may need to allocate resources, prepare internal data
structures, etc. This can increase migration downtime, especially for
VFIO devices with a lot of resources.

To solve this, VFIO migration uAPI defines "initial bytes" as part of
its precopy data stream. Initial bytes can be used in various ways to
improve VFIO migration performance. For example, it can be used to
transfer device metadata to pre-allocate resources in the destination.
However, for this to work we need to make sure that all initial bytes
are sent and loaded in the destination before the source VM is stopped.

Use migration switchover ack capability to make sure a VFIO device's
initial bytes are sent and loaded in the destination before the source
stops the VM and attempts to complete the migration.
This can significantly reduce migration downtime for some devices.

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-06-30 06:02:51 +02:00
Avihai Horon
eda7362af9 vfio/migration: Add VFIO migration pre-copy support
Pre-copy support allows the VFIO device data to be transferred while the
VM is running. This helps to accommodate VFIO devices that have a large
amount of data that needs to be transferred, and it can reduce migration
downtime.

Pre-copy support is optional in VFIO migration protocol v2.
Implement pre-copy of VFIO migration protocol v2 and use it for devices
that support it. Full description of it can be found in the following
Linux commit: 4db52602a607 ("vfio: Extend the device migration protocol
with PRE_COPY").

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-06-30 06:02:51 +02:00
Richard Henderson
017b2e7363 Accelerators patches
- MAINTAINERS: Update Roman Bolshakov email address
 - HAX: Fix a memory leak
 - HAX/NVMM/WHPX/HVF: Rename per-accel state as AccelCPUState
 - KVM: Restrict specific fields from ArchCPU
 - WHPX: Re-enable cross-build gitlab-ci job on case sensitive filesystems
 - WHPX: Fix error message when setting ProcessorCount fails
 - exec/memory: Add definitions for memory listener priorities
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmScVtkACgkQ4+MsLN6t
 wN7p8A//RXuX9gLFT35zx+5axocU3/XBbCsQWSvzzkYoXxmC/TLxvivO66NPGMc0
 C76b1FJUoLS/u9SyJUeIeYkL0rjkzARUKcRpiJXM21WM6ou8Nkz0kuI4ouowt+4K
 i/4chTjxlN5/4PKlHHcX9ZUJ9acVj01zO1BCuj/bVsxO6WMT1kjL+kplVxxFR3aW
 tlbYtUT3v4xmp94FfE2Q9lR25z4usrGnmz2rchaadlVc43kmsNcQRx+EoUdi148n
 lkViRR90sacYPX586s2yxhPpUdtrXjJmEdX0X00urdPqljkRxekHtyTqG4CRZi+K
 hG5NztK7p37GNNXZroL0gpHyr9IX6hZ3o8rmN3IiCOGU6BgQBRUhvvG2sblwcJ1A
 SSiBK4RWtgyIGWt4U6PgVj8IAu55JuqT5xR2r34fH/zccxXlp/B13vadGs7TUK15
 oHDUT4GnKL2R29lVFTl95BzsxwaMtbB9w01CLJk8va2T/97eqtFgvJyuVC9vZb0N
 41u2RkinaQZ+hbq9TP1G21zpG0eyucEMIQ6loUd7+G3KJFjFfB4JzE2VDm0Y/OVy
 77cEEQ67wts29fMNSqqPIQCMttDrNj7JqMMknGBQS2iHPgF+B3KjwIjnRaMBt73I
 CKPITOJPmb+kvIUsK3KlONdicEG57cBxFBTZW5+P9pJXF5izrAY=
 =b9hj
 -----END PGP SIGNATURE-----

Merge tag 'accel-20230628' of https://github.com/philmd/qemu into staging

Accelerators patches

- MAINTAINERS: Update Roman Bolshakov email address
- HAX: Fix a memory leak
- HAX/NVMM/WHPX/HVF: Rename per-accel state as AccelCPUState
- KVM: Restrict specific fields from ArchCPU
- WHPX: Re-enable cross-build gitlab-ci job on case sensitive filesystems
- WHPX: Fix error message when setting ProcessorCount fails
- exec/memory: Add definitions for memory listener priorities

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmScVtkACgkQ4+MsLN6t
# wN7p8A//RXuX9gLFT35zx+5axocU3/XBbCsQWSvzzkYoXxmC/TLxvivO66NPGMc0
# C76b1FJUoLS/u9SyJUeIeYkL0rjkzARUKcRpiJXM21WM6ou8Nkz0kuI4ouowt+4K
# i/4chTjxlN5/4PKlHHcX9ZUJ9acVj01zO1BCuj/bVsxO6WMT1kjL+kplVxxFR3aW
# tlbYtUT3v4xmp94FfE2Q9lR25z4usrGnmz2rchaadlVc43kmsNcQRx+EoUdi148n
# lkViRR90sacYPX586s2yxhPpUdtrXjJmEdX0X00urdPqljkRxekHtyTqG4CRZi+K
# hG5NztK7p37GNNXZroL0gpHyr9IX6hZ3o8rmN3IiCOGU6BgQBRUhvvG2sblwcJ1A
# SSiBK4RWtgyIGWt4U6PgVj8IAu55JuqT5xR2r34fH/zccxXlp/B13vadGs7TUK15
# oHDUT4GnKL2R29lVFTl95BzsxwaMtbB9w01CLJk8va2T/97eqtFgvJyuVC9vZb0N
# 41u2RkinaQZ+hbq9TP1G21zpG0eyucEMIQ6loUd7+G3KJFjFfB4JzE2VDm0Y/OVy
# 77cEEQ67wts29fMNSqqPIQCMttDrNj7JqMMknGBQS2iHPgF+B3KjwIjnRaMBt73I
# CKPITOJPmb+kvIUsK3KlONdicEG57cBxFBTZW5+P9pJXF5izrAY=
# =b9hj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Jun 2023 05:50:49 PM CEST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]

* tag 'accel-20230628' of https://github.com/philmd/qemu: (30 commits)
  exec/memory: Add symbol for the min value of memory listener priority
  exec/memory: Add symbol for memory listener priority for device backend
  exec/memory: Add symbolic value for memory listener priority for accel
  target/i386/WHPX: Fix error message when fail to set ProcessorCount
  target/riscv: Restrict KVM-specific fields from ArchCPU
  target/ppc: Restrict KVM-specific fields from ArchCPU
  target/arm: Restrict KVM-specific fields from ArchCPU
  hw/arm/sbsa-ref: Include missing 'sysemu/kvm.h' header
  hw/intc/arm_gic: Rename 'first_cpu' argument
  hw/intc/arm_gic: Un-inline GIC*/ITS class_name() helpers
  accel/kvm: Declare kvm_direct_msi_allowed in stubs
  accel/kvm: Re-include "exec/memattrs.h" header
  accel: Rename HVF 'struct hvf_vcpu_state' -> AccelCPUState
  accel: Rename 'cpu_state' -> 'cs'
  accel: Inline WHPX get_whpx_vcpu()
  accel: Rename WHPX 'struct whpx_vcpu' -> AccelCPUState
  accel: Remove WHPX unreachable error path
  accel: Inline NVMM get_qemu_vcpu()
  accel: Rename NVMM 'struct qemu_vcpu' -> AccelCPUState
  accel: Remove NVMM unreachable error path
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-29 08:12:48 +02:00
Richard Henderson
47d183b7a8 qemu-sparc queue
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmScHBkeHG1hcmsuY2F2
 ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfuZ8H/3KjLLCaGcO3jnus
 P/ky3wGYx9aah/iNfRDgaaGRkPX18Eabq0BidUt/DN28yQmKgnOcbCwHlIt4QdCt
 PeO9hRNLpCop63LwyQQTrSZEdVZP75CX6dRcN+6h5TsY66/ESZjBsivuJGVHIU6O
 L8zJv2KKg0SKtJHsPGkUppmfyM4btmGTerqSJHv1SJfy4DJdzRMF83/WOZtE5srm
 YvpgZsiztBpHbG/+jLn2mX7iaQiZQCCs+weU0ynszr5WENAnuJderjO+mo0DZkqD
 j+R6LMcHHj6I4uP68eJowdTezOpoZNROh/gdUozCweA1AC/8RotkJa9UcBeEplY/
 +wV8mts=
 =ga0/
 -----END PGP SIGNATURE-----

Merge tag 'qemu-sparc-20230628' of https://github.com/mcayland/qemu into staging

qemu-sparc queue

# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmScHBkeHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfuZ8H/3KjLLCaGcO3jnus
# P/ky3wGYx9aah/iNfRDgaaGRkPX18Eabq0BidUt/DN28yQmKgnOcbCwHlIt4QdCt
# PeO9hRNLpCop63LwyQQTrSZEdVZP75CX6dRcN+6h5TsY66/ESZjBsivuJGVHIU6O
# L8zJv2KKg0SKtJHsPGkUppmfyM4btmGTerqSJHv1SJfy4DJdzRMF83/WOZtE5srm
# YvpgZsiztBpHbG/+jLn2mX7iaQiZQCCs+weU0ynszr5WENAnuJderjO+mo0DZkqD
# j+R6LMcHHj6I4uP68eJowdTezOpoZNROh/gdUozCweA1AC/8RotkJa9UcBeEplY/
# +wV8mts=
# =ga0/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Jun 2023 01:40:09 PM CEST
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* tag 'qemu-sparc-20230628' of https://github.com/mcayland/qemu:
  escc: emulate dip switch language layout settings on SUN keyboard
  target/sparc: Use tcg_gen_lookup_and_goto_ptr for v9 WRASI
  target/sparc: Use DYNAMIC_PC_LOOKUP for v9 RETURN
  target/sparc: Use DYNAMIC_PC_LOOKUP for JMPL
  target/sparc: Use DYNAMIC_PC_LOOKUP for conditional branches
  target/sparc: Introduce DYNAMIC_PC_LOOKUP
  target/sparc: Drop inline markers from translate.c
  target/sparc: Fix npc comparison in sparc_tr_insn_start
  target/sparc: Use tcg_gen_lookup_and_goto_ptr in gen_goto_tb
  Revert "hw/sparc64/niagara: Use blk_name() instead of open-coding it"

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-28 15:55:54 +02:00
Philippe Mathieu-Daudé
098bfc01df docs/devel/testing: Update the 'Docker Debugging' section
Since commit 93cc0506f6 ("tests/docker: Use Fedora containers
for MinGW cross-builds in the gitlab-CI") the MinGW toolchain
is packaged inside the fedora-win[32/64]-cross images.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230624142211.8888-2-philmd@linaro.org>
2023-06-28 13:55:35 +02:00
Henrik Carlqvist
6b90a4cdc0 escc: emulate dip switch language layout settings on SUN keyboard
SUN Type 4, 5 and 5c keyboards have dip switches to choose the language layout
of the keyboard. Solaris makes an ioctl to query the value of the dipswitches
and uses that value to select keyboard layout.  Also the SUN bios like the one
in the file ss5.bin uses this value to support at least some keyboard layouts.
However, the OpenBIOS provided with qemu is hardcoded to always use an US
keyboard layout.

Before this patch, qemu allways gave dip switch value 0x21 (US keyboard),
this patch uses a command line switch like
"-global escc.chnA-sunkbd-layout=de" to select dip switch value. A table is
used to lookup values from arguments like:

-global escc.chnA-sunkbd-layout=fr
-global escc.chnA-sunkbd-layout=es

But the patch also accepts numeric dip switch values directly:

-global escc.chnA-sunkbd-layout=0x2b
-global escc.chnA-sunkbd-layout=43

Both values above are the same and select swedish keyboard as explained in
table 3-15 at
https://docs.oracle.com/cd/E19683-01/806-6642/new-43/index.html

Unless you want to do a full Solaris installation but happen to have
access to a Sun bios file, the easiest way to test that the patch works
is to:

qemu-system-sparc -global escc.chnA-sunkbd-layout=sv -bios /path/to/ss5.bin

If you already happen to have a Solaris installation in a qemu disk image
file you can easily try different keyboard layouts after this patch is
applied.

Signed-off-by: Henrik Carlqvist <hc1245@poolhem.se>
Message-Id: <20230623203007.56d3d182.hc981@poolhem.se>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[MCA edit: update unsigned char to uint8_t, fix spacing issues]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-06-28 10:54:25 +01:00
Klaus Jensen
e409c9057b docs: update hw/nvme documentation for TP4146
Update documentation for TP4146 ("Flexible Data Placement") emulation.

Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2023-06-28 11:22:49 +02:00
Richard Henderson
390e8fc6b0 virtio,pc,pci: fixes, features, cleanups
asymmetric crypto support for cryptodev-vhost-user
 rom migration when rom size changes
 poison get, inject, clear; mock cxl events and irq support for cxl
 shadow virtqueue offload support for vhost-vdpa
 vdpa now maps shadow vrings with MAP_SHARED
 max_cpus went up to 1024 and we default to smbios 3.0 for pc
 
 Fixes, cleanups all over the place. In particular
     hw/acpi: Fix PM control register access
 works around a very long standing bug in memory core.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
 +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
 N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
 iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
 x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
 =Do8p
 -----END PGP SIGNATURE-----

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes, features, cleanups

asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc

Fixes, cleanups all over the place. In particular
    hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
# +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
# N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
# iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
# 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
# x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
# =Do8p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 03:50:09 PM CEST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
  vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present
  vhost_net: add an assertion for TAP client backends
  intel_iommu: Fix address space unmap
  intel_iommu: Fix flag check in replay
  intel_iommu: Fix a potential issue in VFIO dirty page sync
  vhost-user: fully use new backend/frontend naming
  virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()
  hw/i386/pc: Clean up pc_machine_initfn
  vdpa: fix not using CVQ buffer in case of error
  vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devices
  vhost: fix vhost_dev_enable_notifiers() error case
  vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQ
  vdpa: Add vhost_vdpa_net_load_offloads()
  virtio-net: expose virtio_net_supported_guest_offloads()
  hw/net/virtio-net: make some VirtIONet const
  vdpa: reuse virtio_vdev_has_feature()
  include/hw/virtio: make some VirtIODevice const
  vdpa: map shadow vrings with MAP_SHARED
  vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len function
  vdpa: do not block migration if device has cvq and x-svq=on
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26 16:05:45 +02:00
Daniel P. Berrangé
1ddd2ff9cd gitlab: allow overriding name of the upstream repository
The CI rules have special logic for what happens in upstream. To enable
contributors who modify CI rules to test this logic, however, they need
to be able to override which repo is considered upstream. This
introduces the 'QEMU_CI_UPSTREAM' variable

  git push gitlab <branch> -o ci.variable=QEMU_CI_UPSTREAM=berrange

to make it look as if my namespace is the actual upstream. Namespace in
this context refers to the path fragment in gitlab URLs that is above
the repository. Typically this will be the contributor's gitlab login
name.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-26 08:58:02 +02:00
Daniel P. Berrangé
d4c7a56539 gitlab: centralize the container tag name
We use a fixed container tag of 'latest' so that contributors' forks
don't end up with an ever growing number of containers as they work
on throwaway feature branches.

This fixed tag causes problems running CI upstream in stable staging
branches, however, because the stable staging branch will publish old
container content that clashes with that needed by primary staging
branch. This makes it impossible to reliably run CI pipelines in
parallel in upstream for different staging branches.

This introduces $QEMU_CI_CONTAINER_TAG global variable as a way to
change which tag container publishing uses. Initially it can be set
by contributors as a git push option if they want to override the
default use of 'latest' eg

  git push gitlab <branch> -o ci.variable=QEMU_CONTAINER_TAG=fish

this is useful if contributors need to run pipelines for different
branches concurrently in their forks.

Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-26 08:58:02 +02:00
Shashi Mallela
9fe2b4a289 hw/arm/sbsa-ref: add ITS support in SBSA GIC
Create ITS as part of SBSA platform GIC initialization.

GIC ITS information is in DeviceTree so TF-A can pass it to EDK2.

Bumping platform version to 0.2 as this is important hardware change.

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org
Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23 11:29:38 +01:00
Richard Henderson
57223a4c24 docs/system/arm: Document FEAT_RME
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230622143046.1578160-1-richard.henderson@linaro.org
[PMM: fixed typo; note experimental status in emulation.rst too]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-23 11:21:43 +01:00
Ira Weiny
14180d6221 bswap: Add the ability to store to an unaligned 24 bit field
CXL has 24 bit unaligned fields which need to be stored to.  CXL is
specified as little endian.

Define st24_le_p() and the supporting functions to store such a field
from a 32 bit host native value.

The use of b, w, l, q as the size specifier is limiting.  So "24" was
used for the size part of the function name.

Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230526170010.574-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22 18:55:14 -04:00
Philippe Mathieu-Daudé
de6cd7599b meson: Replace softmmu_ss -> system_ss
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.

Mechanical change doing:

  $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20 10:01:30 +02:00
Marcin Juszkiewicz
ff49fb950d docs: sbsa: document board to firmware interface
We plan to add more hardware information into DeviceTree to limit amount
of hardcoded values in firmware.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230531171834.236569-1-marcin.juszkiewicz@linaro.org
[PMM: fix format nits, add text about platform version fields from
 a comment in the C source file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19 14:41:57 +01:00
Richard Henderson
0d7c8da0cc xenpvh5
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh
 rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM
 zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/
 SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/
 FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd
 Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv
 T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o
 e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k
 Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG
 pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR
 ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK
 g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w=
 =543t
 -----END PGP SIGNATURE-----

Merge tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu into staging

xenpvh5

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh
# rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM
# zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/
# SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/
# FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd
# Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv
# T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o
# e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k
# Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG
# pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR
# ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK
# g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w=
# =543t
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 01:48:20 AM CEST
# gpg:                using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [unknown]
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu:
  test/qtest: add xepvh to skip list for qtest
  meson.build: enable xenpv machine build for ARM
  hw/arm: introduce xenpvh machine
  meson.build: do not set have_xen_pci_passthrough for aarch64 targets
  hw/xen/xen-hvm-common: Use g_new and error_report
  hw/xen/xen-hvm-common: skip ioreq creation on ioreq registration failure
  include/hw/xen/xen_common: return error from xen_create_ioreq_server
  xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common
  hw/i386/xen/xen-hvm: move x86-specific fields out of XenIOState
  hw/i386/xen: rearrange xen_hvm_init_pc
  hw/i386/xen/: move xen-mapcache.c to hw/xen/

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-16 12:29:48 +02:00
Vikram Garhwal
733766cd37 hw/arm: introduce xenpvh machine
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.

Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.

Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
    -chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
    -tpmdev emulator,id=tpm0,chardev=chrtpm \
    -machine tpm-base-addr=0x0c000000 \

swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
    mkdir /tmp/vtpm2
    swtpm socket --tpmstate dir=/tmp/vtpm2 \
    --ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &

Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-15 16:46:47 -07:00
Cédric Le Goater
f65f6ad5a7 aspeed: Introduce a "bmc-console" machine option
Most of the Aspeed machines use the UART5 device for the boot console,
and QEMU connects the first serial Chardev to this SoC device for this
purpose. See routine connect_serial_hds_to_uarts().

Nevertheless, some machines use another boot console, such as the fuji,
and commit 5d63d0c76c ("hw/arm/aspeed: Allow machine to set UART
default") introduced a SoC class attribute 'uart_default' and property
to be able to change the boot console device. It was later changed by
commit d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines").

The "bmc-console" machine option goes a step further and lets the user define
the UART device from the QEMU command line without introducing a new
machine definition. For instance, to use device UART3 (mapped on
/dev/ttyS2 under Linux) instead of the default UART5, one would use :

  -M ast2500-evb,bmc-console=uart3

Cc: Abhishek Singh Dagur <abhishek@drut.io>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-06-15 18:35:58 +02:00
Sunil V L
e158a6520a docs/system: riscv: Add pflash usage details
pflash devices can be used in virt machine for different
purposes like for ROM code or S-mode FW payload. Add a
section in the documentation on how to use pflash devices
for different purposes.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230601045910.18646-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13 17:41:01 +10:00
Milan Zamazal
9c36407a44 docs: Fix trivial typos in vhost-user.rst
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-09 23:38:16 +03:00
Jagannathan Raman
7771e8b863
docs: fix multi-process QEMU documentation
Fix a typo in the system documentation for multi-process QEMU.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-06-07 10:21:53 -04:00
Richard Henderson
f5e6786de4 target-arm queue:
* Support gdbstub (guest debug) in HVF
  * xnlx-versal: Support CANFD controller
  * bpim2u: New board model: Banana Pi BPI-M2 Ultra
  * Emulate FEAT_LSE2
  * allow DC CVA[D]P in user mode emulation
  * trap DCC access in user mode emulation
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
 fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
 TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
 bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
 njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
 lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
 pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
 zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
 iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
 Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
 MzinCABXHcovJbGbxZ9j6w==
 =8SdN
 -----END PGP SIGNATURE-----

Merge tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Support gdbstub (guest debug) in HVF
 * xnlx-versal: Support CANFD controller
 * bpim2u: New board model: Banana Pi BPI-M2 Ultra
 * Emulate FEAT_LSE2
 * allow DC CVA[D]P in user mode emulation
 * trap DCC access in user mode emulation

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
# fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
# TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
# 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
# bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
# njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
# lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
# pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
# zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
# iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
# Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
# MzinCABXHcovJbGbxZ9j6w==
# =8SdN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Jun 2023 02:47:17 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits)
  target/arm: trap DCC access in user mode emulation
  tests/tcg/aarch64: add DC CVA[D]P tests
  target/arm: allow DC CVA[D]P in user mode emulation
  target/arm: Enable FEAT_LSE2 for -cpu max
  tests/tcg/multiarch: Adjust sigbus.c
  tests/tcg/aarch64: Use stz2g in mte-7.c
  target/arm: Move mte check for store-exclusive
  target/arm: Relax ordered/atomic alignment checks for LSE2
  target/arm: Add SCTLR.nAA to TBFLAG_A64
  target/arm: Check alignment in helper_mte_check
  target/arm: Pass single_memop to gen_mte_checkN
  target/arm: Pass memop to gen_mte_check1*
  target/arm: Hoist finalize_memop out of do_fp_{ld, st}
  target/arm: Hoist finalize_memop out of do_gpr_{ld, st}
  target/arm: Load/store integer pair with one tcg operation
  target/arm: Sink gen_mte_check1 into load/store_exclusive
  target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r
  target/arm: Use tcg_gen_qemu_st_i128 for STZG, STZ2G
  target/arm: Use tcg_gen_qemu_{st, ld}_i128 for do_fp_{st, ld}
  target/arm: Use tcg_gen_qemu_ld_i128 for LDXP
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-06 12:11:34 -07:00
Paolo Bonzini
e8e4298fea tests: Use separate virtual environment for avocado
This reverts commits eea2d14117 ("Makefile: remove $(TESTS_PYTHON)",
2023-05-26) and 9c6692db55 ("tests: Use configure-provided pyvenv for
tests", 2023-05-18).

Right now, there is a conflict between wanting a ">=" constraint when
using a distro-provided package and wanting a "==" constraint when
installing Avocado from PyPI; this would provide the best of both worlds
in terms of resiliency for both distros that have required packages and
distros that don't.

The conflict is visible also for meson, where we would like to install
the latest 0.63.x version but also accept a distro 1.1.x version.
But it is worse for avocado, for two reasons:

1) we cannot use an "==" constraint to install avocado if the venv
includes a system avocado.  The distro will package plugins that have
"==" constraints on the version that is included in the distro, and, using
"pip install avocado==88.1" on a venv that includes system packages will
result in this error:

   ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
   avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
   avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
   make[1]: Leaving directory '/home/berrange/src/virt/qemu/build'

2) we cannot use ">=" either if the venv does _not_ include a system
avocado, because that would result in the installation of v101.0 which
is the one we've just reverted.

So the idea is to encode the dependencies as an (acceptable, locked)
tuple, like this hypothetical TOML that would be committed inside
python/ and used by mkvenv.py:

  [meson]
  meson = { minimum = "0.63.0", install = "0.63.3", canary = "meson" }

  [docs]
  # 6.0 drops support for Python 3.7
  sphinx = { minimum = "1.6", install = "<6.0", canary = "sphinx-build" }
  sphinx_rtd_theme = { minimum = "0.5" }

  [avocado]
  avocado-framework = { minimum = "88.1", install = "88.1", canary = "avocado" }

Once this is implemented, it would also be possible to install avocado in
pyvenv/ using "mkvenv.py ensure", thus using the distro package on Fedora
and CentOS Stream (the only distros where it's available).  But until
this is implemented, keep avocado in a separate venv.  There is still the
benefit of using a single python for meson custom_targets and for sphinx.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-06 16:29:53 +02:00
Richard Henderson
59b6b42cd3 target/arm: Enable FEAT_LSE2 for -cpu max
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:39 +01:00
qianfan Zhao
8d7f954a7f docs: system: arm: Introduce bananapi_m2u
Add documents for Banana Pi M2U

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
[PMM: Minor format fixes to correct sphinx errors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:34 +01:00
Vikram Garhwal
042d6b0255 xlnx-versal: Connect Xilinx VERSAL CANFD controllers
Connect CANFD0 and CANFD1 on the Versal-virt machine and update xlnx-versal-virt
document with CANFD command line examples.

Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:30 +01:00