Unfold parts of qemu_ram_mmap() for the sake of understanding, moving
declarations to the top, and keeping architecture-specifics in the
ifdef-else blocks. No changes in the function behaviour.
Give ptr and ptr1 meaningful names:
ptr -> guardptr : pointer to the PROT_NONE guard region
ptr1 -> ptr : pointer to the mapped memory returned to caller
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to
be byte-swapped. This means it can't be used when the UUID
to be swapped is in a packed member of a struct. It's also
out of line with the general bswap*() functions we provide
in bswap.h, which take the value to be swapped and return it.
Make qemu_uuid_bswap() take a QemuUUID and return the swapped version.
This fixes some clang warnings about taking the address of
a packed struct member in block/vdi.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some files claim that the code is licensed under the GPL, but then
suddenly suggest that the user should have a look at the LGPL.
That's of course non-sense, replace it with the correct GPL wording
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548255083-8190-1-git-send-email-thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When qemu_signal_init() fails in qemu_init_main_loop(), we return
without setting an error. Its callers crash then when they try to
report the error with error_report_err().
To avoid such segmentation fault, add a new Error parameter to make
the call trace to propagate the err to the final caller.
Fixes: 2f78e491d7
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190113140849.38339-2-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcQTW/AAoJECgfDbjSjVRpY34H/0wniUqht3CVVihAfC9qnL7N
jgAJ41OGgrrCmXLrwa5P5iWxIKRjp2Odo7DQ2dl+9sqYshe6WoBBXmqEa8bDeldE
69EJ3xSnZjkpScqXKoSaDO3dtibUGpdvlTKpjuh7q2FFBOvNvf3hQubhyt/vINsO
qoDMqycjXJkHSaZLfdNb3P/LAkAuHI4veNk8KEbog3XTijSUbZlb2GYc8vT/agka
0SldiEVi9CTIh7co0L2BkcLVeTMVrF3OZuWDek3tVHXPxPaNbQM3GMvHZaxqZusU
SZinnNhcnI++kgLZVHuurxo7e1S9d8Oy0QuHGX8CZ1sfeqy3vzxer0Hbb7BdLIY=
=GhIM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (49 commits)
migration: Use strnlen() for fixed-size string
migration: Fix stringop-truncation warning
hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays
block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays
qemu/compiler: Define QEMU_NONSTRING
acpi: update expected files
hw: acpi: Fix memory hotplug AML generation error
tpm: clear RAM when "memory overwrite" requested
acpi: add ACPI memory clear interface
acpi: build TPM Physical Presence interface
acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
tpm: allocate/map buffer for TPM Physical Presence interface
tpm: add a "ppi" boolean property
hw/misc/edu: add msi_uninit() for pci_edu_uninit()
virtio: Make disable-legacy/disable-modern compat properties optional
globals: Allow global properties to be optional
virtio: virtio 9p really requires CONFIG_VIRTFS to work
virtio: split virtio crypto bits from virtio-pci.h
virtio: split virtio gpu bits from virtio-pci.h
virtio: split virtio serial bits from virtio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit a33fbb4f8b.
The functionality is unused.
Note: in addition to automatic revert, drop second parameter in
hbitmap_iter_next() call from hbitmap_next_dirty_area() too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The function alters bdrv_dirty_iter_next_area(), which is wrong and
less efficient (see further commit
"block/mirror: fix and improve do_sync_target_write" for description).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Assert that the return value is not an error. This is like commit
7e6478e7d4 for qemu_set_cloexec.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is possible for an io_poll callback to be concurrently executed along
with an aio_set_fd_handlers. This can cause all sorts of problems, like
a NULL callback or a bad opaque pointer.
This changes set_fd_handlers so that it no longer modify existing handlers
entries and instead, always insert those after having proper initialisation.
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Remy Noel <remy.noel@blade-group.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20181220152030.28035-3-remy.noel@blade-group.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cleaning the events will cause aio_epoll_update to unregister the fd.
Otherwise, the fd is kept registered until it is destroyed.
Signed-off-by: Remy Noel <remy.noel@blade-group.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20181220152030.28035-2-remy.noel@blade-group.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both qemu & qga build with Vista API by default already, by defining
_WIN32_WINNT 0x0600. Set it globally in osdep.h instead.
This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem
to be really useful these days.
(see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If any of these signals happen on macOS, they are not delivered to other
threads and signalfd_compat receives nothing. Indeed, POSIX reference
and sigprocmask(2) note that an attempt to block the signals results in
undefined behaviour. SEGV and FPE can't also be received by signalfd(2)
on Linux.
An ability to retrieve SIGBUS via signalfd(2) is used by QEMU for
memory preallocation therefore we can't unblock it without consequences.
But it's important to leave a remark that the signal is lost on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
macOS provides pthread_setname_np that doesn't have thread id argument.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181204172535.2799-1-armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before moving them all to include/qemu/xxhash.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_strtosz() & friends reject NaNs, but happily accept infinities.
They shouldn't. Fix that.
The fix makes use of qemu_strtod_finite(). To avoid ugly casts,
change the @end parameter of qemu_strtosz() & friends from char **
to const char **.
Also, add two test cases, testing that "inf" and "NaN" are properly
rejected. While at it, also fixup the function documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-3-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's provide a wrapper for strtod().
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-2-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
POSIX states that the value of endptr is unspecified if strtol()
fails with EINVAL due to an invalid base argument. Since none of
the callers to check_strtox_error() initialized endptr, we could
end up propagating uninitialized data back to a caller on error.
However, passing an out-of-range base is already a sign of poor
programming, so let's just assert that base is in range, at which
point check_strtox_error() can be tightened to assert that it is
receiving an initialized ep that points somewhere within the
caller's original string, regardless of whether strto*() succeeded
or failed with ERANGE.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181206151856.77503-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu_vfio_open_common() initializes s->lock only after passing s to
qemu_vfio_dma_map() via qemu_vfio_init_ramblock().
qemu_vfio_dma_map() tries to lock the uninitialized lock and crashes.
Fix by initializing s->lock first.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1645840
Fixes: 418026ca43
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20181127084143.1113-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our current implementation of qemu_thread_atexit* is broken on OSX.
This is because it works by cerating a piece of thread-specific
data with pthread_key_create() and using the destructor function
for that data to run the notifier function passed to it by
the caller of qemu_thread_atexit_add(). The expected use case
is that the caller uses a __thread variable as the notifier,
and uses the callback to clean up information that it is
keeping per-thread in __thread variables.
Unfortunately, on OSX this does not work, because on OSX
a __thread variable may be destroyed (freed) before the
pthread_key_create() destructor runs. (POSIX imposes no
ordering constraint here; the OSX implementation happens
to implement __thread variables in terms of pthread_key_create((),
whereas Linux uses different mechanisms that mean the __thread
variables will still be present when the pthread_key_create()
destructor is run.)
Fix this by switching to a scheme similar to the one qemu-thread-win32
uses for qemu_thread_atexit: keep the thread's notifiers on a
__thread variable, and run the notifiers on calls to
qemu_thread_exit() and on return from the start routine passed
to qemu_thread_start(). We do this with the pthread_cleanup_push()
API.
We take advantage of the qemu_thread_atexit_add() API
permission not to run thread notifiers on process exit to
avoid having to special case the main thread.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181105135538.28025-3-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use MAP_STACK in qemu_alloc_stack() on OpenBSD.
Added to our 6.4 release.
MAP_STACK Indicate that the mapping is used as a stack. This
flag must be used in combination with MAP_ANON and
MAP_PRIVATE.
Implement MAP_STACK option for mmap(). Synchronous faults (pagefault and
syscall) confirm the stack register points at MAP_STACK memory, otherwise
SIGSEGV is delivered. sigaltstack() and pthread_attr_setstack() are modified
to create a MAP_STACK sub-region which satisfies alignment requirements.
Observe that MAP_STACK can only be set/cleared by mmap(), which zeroes the
contents of the region -- there is no mprotect() equivalent operation, so
there is no MAP_STACK-adding gadget.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181019125239.GA13884@humpty.home.comstyle.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need an accurate count of the number of bits set in a bitmap
after a merge. In particular, since the merge operation short-circuits
a merge from an empty source, if you have bitmaps A, B, and C where
B started empty, then merge C into B, and B into A, an inaccurate
count meant that A did not get the contents of C.
In the worst case, we may falsely regard the bitmap as empty when
it has had new writes merged into it.
Fixes: be58721db
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002233314.30159-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.
This is needed to implement bitmap merge transaction action in further
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 97f40301f1 "error: Functions to report warnings and
informational messages" copied the "use error_setg() instead"
admonition from the error reporting functions to new functions even
though it doesn't actually apply there. Drop it. Also drop it from
vreport(), where it doesn't apply anymore.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181019123923.26649-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
Adds EXTERNAL attribute definition to qemu timers subsystem and assigns
it to virtual clock timers, used in slirp (ICMP IPv6) and ui (key queue).
Virtual clock processing in rr mode can use this attribute instead of a
separate clock type.
Fixes: 87f4fe7653
Fixes: 775a412bf8
Fixes: 9888091404
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <e771f96ab94e86b54b9a783c974f2af3009fe5d1.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attributes are simple flags, associated with individual timers for their
whole lifetime. They intended to be used to mark individual timers for
special handling when they fire.
New/init functions family in timer interface updated and refactored (new
'attribute' argument added, timer_list replaced with timer_list_group+type
combinations, comments improved to avoid info duplication). Also existing
aio interface extended with attribute-enabled variants of functions,
which create/initialize timers.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <f47b81dbce734e9806f9516eba8ca588e6321c2f.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That patch series introduced new virtual clock type for use in external
subsystems. It breaks desired behavior in non-record/replay usage
scenarios due to a small change to existing behavior. Processing of
virtual timers belonging to new clock type is kicked off to the main
loop, which makes these timers asynchronous with vCPU thread and,
in icount mode, with whole guest execution. This breaks expected
determinism in non-record/replay icount mode of emulation where these
"external subsystems" are isolated from the host (i.e. they are
external only to guest core, not to the entire emulation environment).
Example for slirp ("user" backend for network device):
User runs qemu in icount mode with rtc clock=vm without any external
communication interfaces but with "-netdev user,restrict=on". It expects
deterministic execution, because network services are emulated inside
qemu and isolated from host. There are no reasons to get reply from DHCP
server with different delay or something like that.
The next patches revert reimplements the same changes in a better way.
This reverts commit 87f4fe7653.
This reverts commit 775a412bf8.
This reverts commit 9888091404.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <18b1e7c8f155fe26976f91be06bde98eef6f8751.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify qemu_opts_print_help():
- to print expected argument type
- skip description if not available
- sort lines
- prefix with the list name (like qdev, to avoid confusion)
- drop 16-chars alignment, use a '-' as seperator for option name and
description
For ex, "-spice help" output is changed from:
port No description available
tls-port No description available
addr No description available
[...]
gl No description available
rendernode No description available
to:
spice.addr=str
spice.agent-mouse=bool (on/off)
spice.disable-agent-file-xfer=bool (on/off)
[...]
spice.x509-key-password=str
spice.zlib-glz-wan-compression=str
"qemu-img create -f qcow2 -o help", changed from:
size Virtual disk size
compat Compatibility level (0.10 or 1.1)
backing_file File name of a base image
[...]
lazy_refcounts Postpone refcount updates
refcount_bits Width of a reference count entry in bits
to:
backing_file=str - File name of a base image
backing_fmt=str - Image format of the base image
cluster_size=size - qcow2 cluster size
[...]
refcount_bits=num - Width of a reference count entry in bits
size=size - Virtual disk size
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QDev options accept 'help' (or '?', but that's problematic with shell
globbing) in the list of parameters, which is handy to list the
available options.
Unfortunately, this isn't built in QemuOpts. qemu_opts_parse_noisily()
seems to be the common path for command line options, so place a
fallback to print help, listing the available options.
This is quite handy, for example with qemu "-spice help".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Slirp and VNC modules use virtual clock for processing some events that
are related to the guest execution speed.
But virtual clock-related events are consideres to be deterministic and
are recorded/replayed by icount mechanism. But slirp and VNC lie outside
the recorded guest core (which includes CPU and peripherals).
Therefore slirp and VNC are external for the guest, but should work at
guest speed.
This patch introduces new virtual clock which can be used for external
subsystems for running timers that are synchronized with the guest.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912082002.3228.82417.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run some memfd-related checks before registering hostmem-memfd &
various properties. This will help libvirt to figure out what the host
is supposed to be capable of.
qemu_memfd_check() is changed to a less optimized version, since it is
used with various flags, it no longer caches the result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180906161415.8543-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the seqlock, we either have to use atomics to remain
within defined behaviour (and note that 64-bit atomics aren't
always guaranteed to compile, irrespective of __nocheck), or
drop the atomics and be in undefined behaviour territory.
Fix it by dropping the seqlock and using atomic64 accessors.
This will limit scalability when !CONFIG_ATOMIC64, but those
machines (1) don't have many users and (2) are unlikely to
have many cores.
- With CONFIG_ATOMIC64:
$ tests/atomic_add-bench -n 1 -m -p
Throughput: 13.00 Mops/s
- Forcing !CONFIG_ATOMIC64:
$ tests/atomic_add-bench -n 1 -m -p
Throughput: 10.89 Mops/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-5-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces read/set accessors for int64_t and uint64_t.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions do not modify their @ht or @bucket arguments.
Constify those arguments.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
seqlock_read_begin takes a const param since c04649eeea
("seqlock: constify seqlock_read_begin", 2018-08-23), so
we can constify the entire lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This currently has no users, but the use case is so common that I
think we must support it.
Note that without the appended we cannot safely remove a set of
elements; a 2-step approach (i.e. qht_iter first, keep track of
the to-be-deleted elements, and then a bunch of qht_remove calls)
would be racy, since between the iteration and the removals other
threads might insert additional elements.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 70232b5253 ("aio-posix: Don't count ctx->notifier as progress when
2018-08-15), by not reporting progress, causes aio_poll to execute the
system call when polling succeeds because of ctx->notifier. This introduces
latency before the call to aio_bh_poll() and negates the advantages of
polling, unfortunately.
The fix builds on the previous patch, separating the effect of polling on
the timeout from the progress reported to aio_poll(). ctx->notifier
does zero the timeout, causing the caller to skip the system call,
but it does not report progress, so that the bug fix of commit 70232b5253
still stands.
Fixes: 70232b5253
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-4-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is a preparation for the next patch, and also a very small
optimization. Compute the timeout only once, before invoking
try_poll_mode, and adjust it in run_poll_handlers. The adjustment
is the polling time when polling fails, or zero (non-blocking) if
polling succeeds.
Fixes: 70232b5253
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-3-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It is valid for an aio_set_fd_handler to happen concurrently with
aio_poll. In that case, poll_disable_cnt can change under the heels
of aio_poll, and the assertion on poll_disable_cnt can fail in
run_poll_handlers.
Therefore, this patch simply checks the counter on every polling
iteration. There are no particular needs for ordering, since the
polling loop is terminated anyway by aio_notify at the end of
aio_set_fd_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-2-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dXgp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-09-25' into staging
- Deprecate the usage of a network backend via "name" instead of "id"
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
# gpg: Signature made Tue 25 Sep 2018 16:58:42 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-09-25:
Revert "check: Move VMXNET3 test to common"
Revert "check: Move endianess test to common"
Revert "check: Move wdt_ib700 test to common"
tests/migration: Speed up the test on ppc64
hw/qdev-core: Fix description of instance_init
qdev: fix a typo in comment
docs: Fix some typos (most found by codespell)
trivial: Make bios files and source files non-executable
memfd: fix possible usage of the uninitialized file descriptor
hw/core/machine: Officially deprecate the enforce-config-section parameter
net/slirp: Deprecate the [hub_id name] parameter tuple
net: Deprecate the "name" parameter of -net
Makefile: Add missing dependency for qemu-deprecated.texi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qemu_memfd_alloc_check() routine allocates the fd variable on stack.
This variable is initialized inside the qemu_memfd_alloc() function.
There are several cases when *fd will be left unintialized which can
lead to the unexpected close() in the qemu_memfd_free() call.
Set file descriptor to -1 before calling the qemu_memfd_alloc routine.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.
Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().
This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.
Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_do_drained_begin/end() assume that they are called with the
AioContext lock of bs held. If we call drain functions from a coroutine
with the AioContext lock held, we yield and schedule a BH to move out of
coroutine context. This means that the lock for the home context of the
coroutine is released and must be re-acquired in the bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
AIO Coroutines shouldn't by managed by an AioContext different than the
one assigned when they are created. aio_co_enter avoids entering a
coroutine from a different AioContext, calling aio_co_schedule instead.
Scheduled coroutines are then entered by co_schedule_bh_cb using
qemu_coroutine_enter, which just calls qemu_aio_coroutine_enter with the
current AioContext obtained with qemu_get_current_aio_context.
Eventually, co->ctx will be set to the AioContext passed as an argument
to qemu_aio_coroutine_enter.
This means that, if an IO Thread's AioConext is being processed by the
Main Thread (due to aio_poll being called with a BDS AioContext, as it
happens in AIO_WAIT_WHILE among other places), the AioContext from some
coroutines may be wrongly replaced with the one from the Main Thread.
This is the root cause behind some crashes, mainly triggered by the
drain code at block/io.c. The most common are these abort and failed
assertion:
util/async.c:aio_co_schedule
456 if (scheduled) {
457 fprintf(stderr,
458 "%s: Co-routine was already scheduled in '%s'\n",
459 __func__, scheduled);
460 abort();
461 }
util/qemu-coroutine-lock.c:
286 assert(mutex->holder == self);
But it's also known to cause random errors at different locations, and
even SIGSEGV with broken coroutine backtraces.
By using qemu_aio_coroutine_enter directly in co_schedule_bh_cb, we can
pass the correct AioContext as an argument, making sure co->ctx is not
wrongly altered.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two functions to print an error/warning report once depending
on a passed-in condition variable and flip it if printed. This is
useful if you want to print a message not once-globally, but e.g.
once-per-device.
Inspired by warn_once() in hw/vfio/ccw.c, which has been replaced
with warn_report_once_cond().
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180830145902.27376-2-cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Function comments reworded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
vhost-user-gpu will share the same code to open a DRM node.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-20-marcandre.lureau@redhat.com>
[ kraxel: buildfix: util/drm.o must be CONFIG_OPENGL not CONFIG_LINUX ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We reject bytes that can't occur in valid UTF-8 (\xC0..\xC1,
\xF5..\xFF in the lexer. That's insufficient; there's plenty of
invalid UTF-8 not containing these bytes, as demonstrated by
check-qjson:
* Malformed sequences
- Unexpected continuation bytes
- Missing continuation bytes after start bytes other than
\xC0..\xC1, \xF5..\xFD.
* Overlong sequences with start bytes other than \xC0..\xC1,
\xF5..\xFD.
* Invalid code points
Fixing this in the lexer would be bothersome. Fixing it in the parser
is straightforward, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-23-armbru@redhat.com>
Let's set the alignment just like for the posix variant. This will
implicitly set the alignment of the underlying memory region and
therefore make memory_region_get_alignment(mr) return something > 0 for
all memory backends applicable to PCDIMM/NVDIMM.
The allocation granularity is ususally 64k, while the page size is 4k.
The documentation of VirtualAlloc is not really comprehensible in case
only MEM_COMMIT is specified without an address. We'll detect the actual
values and then go for the bigger one. The expection is, that it will
always be 64k aligned. (The assumption is that MEM_COMMIT does an
implicit MEM_RESERVE, so the address will always be aligned to the
allocation granularity. And the allocation granularity is always bigger
than the page size).
This will allow us to drop special handling in pc.c for
memory_region_get_alignment(mr) == 0, as we can then assume that it is
always set (and AFAICS >= getpagesize()).
For pc in pc_memory_plug(), under Windows TARGET_PAGE_SIZE == getpagesize(),
therefore alignment of DIMMs will not change, and therefore also not the
guest physical memory layout.
For spapr in spapr_memory_plug(), an alignment of 0 would have been used
until now. As QEMU_ALIGN_UP will crash with the alignment being 0, this
never worked, so we don't have to care about compatibility handling.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-3-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current paths for modules are CONFIG_QEMU_MODDIR and paths relative
to the executable. Qemu and its modules can be installed and executed in
paths that are different from these search paths. This change allows
a search path to be specified by environment variable.
An example usage for this is postmarketOS[1]. This is a build environment
for Alpine Linux. It sets up Alpine Linux in a chroot environment.
Alpine's Qemu packages are installed in the chroot. The Alpine Linux Qemu
package is used to test compiled Alpine Linux system images. This way there
isn't a reliance on the which ever version of Qemu the host system / distro
provides.
postmarketOS executes Qemu on host system outside of the chroot
The Qemu module search path needs to point to the location of the
chroot relative to the host system.
e.g.
The root of the Alpine Linux chroot is:
~/.local/var/pmbootstrap/chroot_native/
Alpine's Qemu is installed at
~/.local/var/pmbootstrap/chroot_native/usr/bin/
The Qemu module search path needs to be:
QEMU_MODULE_DIR=~/.local/var/pmbootstrap/chroot_native/usr/lib/qemu/
[1] https://postmarketos.org/
Signed-off-by: ryang <decatf@gmail.com>
Message-Id: <20180704181010.GA918@computer>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The BQL is acquired via qemu_mutex_lock_iothread(), which makes
the profiler assign the associated wait time (i.e. most of
BQL wait time) entirely to that function. This loses the original
call site information, which does not help diagnose BQL contention.
Fix it by tracking the callers explicitly.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I first implemented this by deleting all entries in the global
hash table. But doing that safely slows down profiling, since
we'd need to introduce rcu_read_lock/unlock in the fast path.
What's implemented here avoids messing with the thread-local
data in the global hash table. It achieves this by taking a snapshot
of the current state, so that subsequent reports present the delta
wrt to the snapshot.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The goal of this module is to profile synchronization primitives (i.e.
mutexes, recursive mutexes and condition variables) so that scalability
issues can be quickly diagnosed.
Sync primitives are profiled by QSP based on the vaddr of the object accessed
as well as the call site (file:line_nr). That means the same object called
from two different call sites will be tracked in separate entries, which
might be reported together or separately (see subsequent commit on
call site coalescing).
Some perf numbers:
Host: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
Command: taskset -c 0 tests/atomic_add-bench -d 5 -m
- Before: 54.80 Mops/s
- After: 54.75 Mops/s
That is, a negligible slowdown due to the now indirect call to
qemu_mutex_lock. Note that using a branch instead of an indirect
call introduces a more severe slowdown (53.65 Mops/s, i.e. 2% slowdown).
Enabling the profiler (with -p, added in this series) is more interesting:
- No profiling: 54.75 Mops/s
- W/ profiling: 12.53 Mops/s
That is, a 4.36X slowdown.
We can break down this slowdown by removing the get_clock calls or
the entry lookup:
- No profiling: 54.75 Mops/s
- W/o get_clock: 25.37 Mops/s
- W/o entry lookup: 19.30 Mops/s
- W/ profiling: 12.53 Mops/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The counter is for qemu_lockcnt_inc/dec sections (read side),
qemu_lockcnt_lock/unlock is for the write side.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180803063917.30292-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
An aio_notify() pairs with an aio_notify_accept(). The former should
happen in the main thread or a vCPU thread, and the latter should be
done in the IOThread.
There is one rare case that the main thread or vCPU thread may "steal"
the aio_notify() event just raised by itself, in bdrv_set_aio_context()
[1]. The sequence is like this:
main thread IO Thread
===============================================================
bdrv_drained_begin()
aio_disable_external(ctx)
aio_poll(ctx, true)
ctx->notify_me += 2
...
bdrv_drained_end()
...
aio_notify()
...
bdrv_set_aio_context()
aio_poll(ctx, false)
[1] aio_notify_accept(ctx)
ppoll() /* Hang! */
[1] is problematic. It will clear the ctx->notifier event so that
the blocked ppoll() will not return.
(For the curious, this bug was noticed when booting a number of VMs
simultaneously in RHV. One or two of the VMs will hit this race
condition, making the VIRTIO device unresponsive to I/O commands. When
it hangs, Seabios is busy waiting for a read request to complete (read
MBR), right after initializing the virtio-blk-pci device, using 100%
guest CPU. See also https://bugzilla.redhat.com/show_bug.cgi?id=1562750
for the original bug analysis.)
aio_notify() only injects an event when ctx->notify_me is set,
correspondingly aio_notify_accept() is only useful when ctx->notify_me
_was_ set. Move the call to it into the "blocking" branch. This will
effectively skip [1] and fix the hang.
Furthermore, blocking aio_poll is only allowed on home thread
(in_aio_context_home_thread), because otherwise two blocking
aio_poll()'s can steal each other's ctx->notifier event and cause
hanging just like described above.
Cc: qemu-stable@nongnu.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-3-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The same logic exists in fd polling. This change is especially important
to avoid busy loop once we limit aio_notify_accept() to blocking
aio_poll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180809132259.18402-2-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Ciro Santilli reported that commit a5ed352596
breaks the execution replay. It happens due to the probing the clock
for the new instances of iothread.
However, this probing was made in replay mode for the timer lists that
are empty.
This patch removes clock probing in replay mode.
It is an artifact of the old version with another thread model.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180725121526.12867.17866.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No callers of get_opt_value() pass in a NULL for the "value" parameter,
so the check is redundant.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-4-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The logic for parsing the multiboot initrd modules was messed up in
commit 950c4e6c94
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Apr 16 12:17:43 2018 +0100
opts: don't silently truncate long option values
Causing the length to be undercounter, and the number of modules over
counted. It also passes NULL to get_opt_value() which was not robust
at accepting a NULL value.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180514171913.17664-2-berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
soft-freeze, but I'd like these preparatory patches to be merged anyway.
-----BEGIN PGP SIGNATURE-----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=vVJr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
The Darwin host support still needs some more work. It won't make it for
soft-freeze, but I'd like these preparatory patches to be merged anyway.
# gpg: Signature made Fri 29 Jun 2018 11:39:04 BST
# gpg: using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/for-upstream:
9p: darwin: Explicitly cast comparisons of mode_t with -1
cutils: Provide strchrnul
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This updates the minimum required glib version to 2.40
-----BEGIN PGP SIGNATURE-----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=8tKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/min-glib-pull-request' into staging
glib: update the min required version
This updates the minimum required glib version to 2.40
# gpg: Signature made Fri 29 Jun 2018 12:24:58 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/min-glib-pull-request:
glib: enforce the minimum required version and warn about old APIs
glib: bump min required glib library version to 2.40
util: remove redundant include of glib.h and add osdep.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-7: 2.50.3
Debian (Stretch): 2.50.3
Debian (Jessie): 2.42.1
OpenBSD (Ports): 2.54.3
FreeBSD (Ports): 2.50.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.42 is a reasonable target.
The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.
Docker jobs that not longer satisfy this new min version are removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Code must only ever include glib.h indirectly via the glib-compat.h
header file, because we will need some macros set before glib.h is
pulled in. Adding extra includes of glib.h will (soon) cause compile
failures such as:
In file included from /home/berrange/src/virt/qemu/include/qemu/osdep.h:107,
from /home/berrange/src/virt/qemu/include/qemu/iova-tree.h:26,
from util/iova-tree.c:13:
/home/berrange/src/virt/qemu/include/glib-compat.h:22: error: "GLIB_VERSION_MIN_REQUIRED" redefined [-Werror]
#define GLIB_VERSION_MIN_REQUIRED GLIB_VERSION_2_40
In file included from /usr/include/glib-2.0/glib/gtypes.h:34,
from /usr/include/glib-2.0/glib/galloca.h:32,
from /usr/include/glib-2.0/glib.h:30,
from util/iova-tree.c:12:
/usr/include/glib-2.0/glib/gversionmacros.h:237: note: this is the location of the previous definition
# define GLIB_VERSION_MIN_REQUIRED (GLIB_VERSION_CUR_STABLE)
Furthermore, the osdep.h include should always be done directly from the
.c file rather than indirectly via any .h file.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
strchrnul is a GNU extension and thus unavailable on a number of targets.
In the review for a commit removing strchrnul from 9p, I was asked to
create a qemu_strchrnul helper to factor out this functionality.
Do so, and use it in a number of other places in the code base that inlined
the replacement pattern in a place where strchrnul could be used.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
We have had some tracing tools for mutex but it's not easy to use them
for e.g. dead locks. Let's provide "--enable-debug-mutex" parameter
when configure to allow QemuMutex to store the last owner that took
specific lock. It will be easy to use this tool to debug deadlocks
since we can directly know who took the lock then as long as we can have
a debugger attached to the process.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180425025459.5258-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce some hooks for the shared part of qemu thread between POSIX
and Windows implementations. Note that in qemu_mutex_unlock_impl() we
moved the call before unlock operation which should make more sense.
And we don't need qemu_mutex_post_unlock() hook.
Put all these shared hooks into the header files. It should be internal
to qemu-thread but not for qemu-thread users, hence put into util/
directory.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180425025459.5258-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
laio_init() can fail for a couple of reasons, which will lead to a NULL
pointer dereference in laio_attach_aio_context().
To solve this, add a aio_setup_linux_aio() function which is called
early in raw_open_common. If this fails, propagate the error up. The
signature of aio_get_linux_aio() was not modified, because it seems
preferable to return the actual errno from the possible failing
initialization calls.
Additionally, when the AioContext changes, we need to associate a
LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
callback and call the new aio_setup_linux_aio(), which will allocate a
new AioContext if needed, and return errors on failures. If it fails for
any reason, fallback to threaded AIO with an error message, as the
device is already in-use by the guest.
Add an assert that aio_get_linux_aio() cannot return NULL.
Signed-off-by: Nishanth Aravamudan <naravamudan@digitalocean.com>
Message-id: 20180622193700.6523-1-naravamudan@digitalocean.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This new parameter allows the caller to just query the next dirty
position without moving the iterator.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Introduce a new global big lock for mon_fdsets. Take it where needed.
The monitor_fdset_get_fd() handling is a bit tricky: now we need to call
qemu_mutex_unlock() which might pollute errno, so we need to make sure
the correct errno be passed up to the callers. To make things simpler,
we let monitor_fdset_get_fd() return the -errno directly when error
happens, then in qemu_open() we move it back into errno.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180608035511.7439-8-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The meaning of "existing" is now changed to "matches in hash and
ht->cmp result". This is saner than just checking the pointer value.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qht_lookup now uses the default cmp function. qht_lookup_custom is defined
to retain the old behaviour, that is a cmp function is explicitly provided.
qht_insert will gain use of the default cmp in the next patch.
Note that we move qht_lookup_custom's @func to be the last argument,
which makes the new qht_lookup as simple as possible.
Instead of this (i.e. keeping @func 2nd):
0000000000010750 <qht_lookup>:
10750: 89 d1 mov %edx,%ecx
10752: 48 89 f2 mov %rsi,%rdx
10755: 48 8b 77 08 mov 0x8(%rdi),%rsi
10759: e9 22 ff ff ff jmpq 10680 <qht_lookup_custom>
1075e: 66 90 xchg %ax,%ax
We get:
0000000000010740 <qht_lookup>:
10740: 48 8b 4f 08 mov 0x8(%rdi),%rcx
10744: e9 37 ff ff ff jmpq 10680 <qht_lookup_custom>
10749: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We banned use of certain g_assert_FOO() functions outside tests, and
made checkpatch.pl flag them (commit 6e9389563e). We neglected to
purge existing uses. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180608170231.27912-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
It really is up to the caller to decide what this list of options means.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
