When doing a "make -j10" in the vanilla QEMU source tree (without
running "configure" first), the Makefile currently generates two
files already, qemu-version.h and qemu-options.def. This should not
happen, so let's only build the generated files if config-host.mak
is available (i.e. "configure" has been run already).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1496926799-13040-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently all trace.o are linked into qemu-system, qemu-img,
qemu-nbd, qemu-io etc., even the corresponding components
are not included.
Put all trace.o into libqemuutil.a that the linker would only pull in .o
files containing symbols that are actually referenced by the
program.
Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qapi2texi.py changes, we regenerate everything QAPI. Screwed up
in commit 56e8bdd.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490015515-25851-2-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Change Makefile.objs to use CONFIG_XEN instead of CONFIG_XEN_BACKEND, so
that the Xen backends are only built for targets that support Xen.
Set CONFIG_XEN in the toplevel Makefile to ensure that files that are
built only once pick up Xen support properly.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: pbonzini@redhat.com
CC: peter.maydell@linaro.org
CC: rth@twiddle.net
CC: stefanha@redhat.com
Message-Id: <1489694518-16978-1-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its
user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches
qemu-ga-ref.texi.
Build the intermediate .texi next to the sources and the final output
in docs/ instead of dumping them into the build root.
Fix version.texi dependencies so that only the targets that actually
need it depend on it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
The build rules for trace files have a dependancy on $(tracetool-y).
This variable populated in the trace/Makefile.objs file and thus its
definition gets pulled into the top level makefile. This happens too
late in the process though, so by the time $(tracetool-y) is defined,
make has already evaluated $(tracetool-y) in the dependancies and
found it to be empty. The result is that when the tracetool source
is changed, the generated files are not rebuilt. The solution is to
define the variable in the top level makefile too
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20170315123421.28815-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Files should not be created in the build dir during the
'make install' phase. List 'trace-events-all' as a
generated file so that it gets created upfront during
build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170228122901.24520-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The only functional difference between the GENERATED_HEADERS
and GENERATED_SOURCES variables is that 'Makefile' has a
dependancy on GENERATED_HEADERS, causing generated header files
to be created immediatey at the start of the build process.
There is no reason why this early creation should be restricted
to the .h files, and not include .c files too. Merge both of
the variables into a single GENERATED_FILES variable to make
it clear it is for any type of generated file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170228122901.24520-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unfortunately some older versions of makeinfo don't correctly
handle the -D command line option and fail to set the variable.
This then causes them to complain
docs/qemu-ga-ref.texi:41: warning: undefined flag: VERSION
Work around this by doing as the autotools do, and writing
the information into a version.texi file which we then
include from the .texi files that need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487357968-31000-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By commit 67a1de0d, When we perform 'git pull && make && sudo make install',
In 'make' stage a qemu-version.h.tmp will be generated. If the content of
qemu-version.h.tmp and qemu-version.h aren't consistent, The qemu-version.h.tmp
will be renamed to qemu-version.h. Because of the target FORCE, The same action
will be do again in 'make install' stage.
In 'make install' stage, If there is no qemu-version.h.tmp exists and we run
'make install' with sudo, The owner and group of new qemu-version.h.tmp will be
privileged user/group. When we run 'make' next time, qemu-version.h.tmp can't
be overwritten because of permission issue.
This patch removed qemu-version.h.tmp after build to fix this issue.
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20170215024030.23895-1-lma@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We install this file to data dir but since 0ab8ed18 it's no longer
required by any objects during "make". List it explicitly as a depended
target of install and fix the broken "make install" command.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170204143245.15974-1-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will help to split char.c in several units without having to
reference them all everywhere. This is useful in particular for tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move makeinfo flags from MAKEINFO to MAKEINFOFLAGS. Fix the call of
quiet-command for target qemu-ga-qapi.texi. Both messed up in commit
56e8bdd.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1484816804-12598-1-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When qemu-doc.txt was added as a new output format in
commit f8bab10b4c, it was not added to either the
list of files to remove in distclean or to the dependency
line that forces qemu-options.texi to be built before
attempting to build qemu-doc.*.
In particular, the missing dependency meant that on
some platforms (notably OSX hosts) we would try to
build qemu-doc.txt before qemu-options.texi had been
fully written out, and then makeinfo would complain
about missing cross-reference targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1485266538-10119-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Generate and install the man, txt and html versions of QAPI
documentation (generate and install qemu-doc.txt too).
Add it also to optional pdf/info targets.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Build plain text documentation, and install it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-21-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The recipe for making a man page from .texi is duplicated several
times over. Capture it in suitable pattern rules instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-20-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no clear reason to have rules to generate dvi format
documentation, pdf is generally better supported nowadays.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-19-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Splitting the info files doesn't bring much benefits these days.
This fixes also untracked generated info files from git ignore.
Let's use MAKEINFOFLAGS for common flags, --number-sections is already
the default anyway, so adding it doesn't change the info output.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-18-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Moving the remaining bits of documentation to the json
file (text improvements is not the objective of this patch)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYVFkHAAoJECgfDbjSjVRpdc0H/1JMgQn0/J6vjKfeRY7720y8
/Bihf4gjKN2bPtu6pTGY1KQBvK76ShyvZZBFCa5bf8a4V9HP4BgSQ8mQ7ZUURzJJ
OslYbSzK1R2LiWJ40e9xdFOoKWKB3lK1lBF/Xb8QPZPoJ0D50Fo2xpymt4hZFdkF
oSnXxHmYoKMsMmmqJZd3aaqyffFLYGmcm1dbJOxninwu/nBzOBY2SQmmaaacSoGn
3D5988i6OcD1qbavfk4rNCQV4avJA+H7c/FmXH3WarPE8M9/jgnAaUDdknFicUA8
hGwMsLrO/7sMnMYtSQIxWg743LhrAm93HCr2u/TgLzhYbPydmLCpup5eAWj+jvo=
=nN2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: avoid using guest_notifier_mask in vhost-user mode
pci: fix error message for express slots
i386: amd_iommu: fix MMIO register count and access
tests/vhost-user-bridge: use contrib/libvhost-user
contrib: add libvhost-user
tests/vhost-user-bridge: do not accept more than one connection
tests/vhost-user-bridge: indicate peer disconnected
tests/vhost-user-bridge: remove unnecessary dispatcher_remove
tests/vhost-user-bridge: remove false comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was removed in commit e999ee4434, there is a few
left-over.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161108070513.30274-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a library to help implementing vhost-user backend (or slave).
Dealing with vhost-user as an application developer isn't so easy: you
have all the trouble with any protocol: validation, unix ancillary data,
shared memory, eventfd, logging, and on top of that you need to deal
with virtio queues, if possible efficiently.
qemu test has a nice vhost-user testing application vhost-user-bridge,
which implements most of vhost-user, and virtio.c which implements
virtqueues manipulation. Based on these two, I tried to make a simple
library, reusable for tests or development of new vhost-user scenarios.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Felipe: set used_idx copy on SET_VRING_ADDR and update shadow avail idx
on SET_VRING_BASE]
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The NSIS based installer currently does not install qemu-ga.
It installs the executables and other files for the QEMU system emulation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is the initial image of skiboot 5.3.7 (commit 762d0082) for
the PowerPC PowerNV (Non-Virtualized) platform. Built from
submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the generated-events.[ch] files contain the
event dstates, constants and TraceEvent structs, while the
generated-tracers.[ch] files contain the actual trace
probe logic. With the removal of usage of the event enums
from the API there is no longer any compelling reason for
the separation between these files. The generated-events.h
content is only ever needed from the generated-tracers.[ch]
files.
The enums/constants/structs from generated-events.[ch] are
thus moved into the generated-tracers.[ch], so that there
is one less file to be generated.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Merge what is left of qemu-tech into the main manual as an appendix.
Ultimately we should have a new internals manual built from docs/, and
then the "Translator Internals" parts of qemu-tech could move to docs/
as well. The bits on limitation and features of CPU emulation should
remain in qemu-doc.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
Extend the current module interface to allow for block drivers to be
loaded dynamically on request. The only block drivers that can be
converted into modules are the drivers that don't perform any init
operation except for registering themselves.
In addition, only the protocol drivers are being modularized, as they
are the only ones which see significant performance benefits. The format
drivers do not generally link to external libraries, so modularizing
them is of no benefit from a performance perspective.
All the necessary module information is located in a new structure found
in module_block.h
This spoils the purpose of 5505e8b76f (block/dmg: make it modular).
Before this patch, if module build is enabled, block-dmg.so is linked to
libbz2, whereas the main binary is not. In downstream, theoretically, it
means only the qemu-block-extra package depends on libbz2, while the
main QEMU package needn't to. With this patch, we (temporarily) change
the case so that the main QEMU depends on libbz2 again.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-4-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Do a signed comparison against the length of
block_driver_modules[], so it will not cause a compile error when
empty]
Signed-off-by: Max Reitz <mreitz@redhat.com>
To simplify the addition of new block modules, add a script that generates
module_block.h automatically from the modules' source code.
This script assumes that the QEMU coding style rules are followed.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-3-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Since bd6092e Replace qmp-commands.hx by docs/qmp-commands.txt
make install fails if building out of source-tree.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1474362094-2293-1-git-send-email-riku.voipio@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only remaining function of qmp-commands.hx is to let us generate
qmp-commands.txt from it. Replace qmp-commands.hx by qmp-commands.txt.
We intend to move the documentation into the QAPI schema and generate
qapi-commands.txt from it, but not right now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
from generated qapi commands registry. Update and fix the documentation
too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When calling make with a CFLAGS=.. argument, the -g/-O filter is not
applied, which may result with build failure with ASAN for example. It
could be solved with an 'override' directive on CFLAGS, but that would
actually prevent setting different CFLAGS manually.
Instead, filter the CFLAGS argument from the top-level Makefile (so
you could still call make with a different CFLAGS argument on a
rom/Makefile manually)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160805082421.21994-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This optionrom is based on linuxboot.S.
Signed-off-by: Marc Marí <markmb@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com>
[Add -fno-toplevel-reorder, support clang without -m16. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The --quiet argument is not available on all operating systems. Use -s
instead to match the rest of the Makefile uses. This fixes a non-fatal
error seen on FreeBSD.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Sean Bruno <sbruno@freebsd.org>
Message-Id: <20160614180734.8782-1-sbruno@freebsd.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit adds a fast variant of SeaBIOS called 'bios-fast.bin'.
It's designed to be the fastest (also the smallest, but that's not the
main aim) SeaBIOS that is just enough to boot a Linux kernel using the
-kernel option on i686 and x86_64.
This commit does not modify the -kernel option to use this. You have
to specify it by doing something like this:
-kernel vmlinuz -bios bios-fast.bin
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
... so configure re-runs on pc-bios updates such as new pxe roms.
Needed because configure symlinks the prebuilt roms from src
into build tree.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The command will work this way:
qemu-img --trace "qcow2*" create -f qcow2 1.img 64G
[Quote "qcow2*" to protect against shell globbing as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-8-git-send-email-den@openvz.org
Suggested by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Please note, trace_init_backends() must be called in the final process,
i.e. after daemonization. This is necessary to keep tracing thread in
the proper process.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-6-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This text will be included to qemu-nbd/qemu-img mans in the next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-3-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
"ctags" produces a file named "tags", not "ctags". It doesn't look
reasonable to use phony target name as a file name to remove. Just use
exact file names to remove in "ctags" and "TAGS" target receipts.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1465495115-24665-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, if not specified in "./configure", QEMU_PKGVERSION will be
empty. Write a rule in Makefile to generate a value from "git describe"
combined with a possible git tree cleanness suffix, and write into a new
header.
$ cat qemu-version.h
#define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty"
Include the header in .c files where the macro is referenced. It's not
necessary to include it in all files, otherwise each time the content of
the file changes, all sources have to be recompiled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that the various documentation and C code files are rebuilt
whenever there is a change in the script that splits them out of
.hx files.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that config-devices.mak is rebuilt whenever
there is a change in the scripts that generates it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file is only included from the top Makefile. Rename it to reflect
this more obviously.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464747811-26917-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds a group of make targets to run docker tests, all are available
in source tree without running ./configure.
The usage is shown with "make docker".
Besides the fixed ones, dynamic targets for building each image and
running each test in each image are generated automatically by make,
scanning $(SRC_PATH)/tests/docker/ files with specific patterns.
Alternative to manually list particular targets (docker-TEST@IMAGE)
set, you can control which tests/images to run by filtering variables,
TESTS= and IMAGES=, which are expressed in Makefile pattern syntax,
"foo% %bar ...". For example:
$ make docker-test IMAGES="ubuntu fedora"
Unfortunately, it's impossible to propagate "-j $JOBS" into make in
containers, however since each combination is made a first class target
in the top Makefile, "make -j$N docker-test" still parallels the tests
coarsely.
Still, $J is made a magic variable to let all make invocations in
containers to use -j$J.
Instead of providing a live version of the source tree to the docker
container we snapshot it with git-archive. This ensures the tree is in a
pristine state for whatever operations the container is going to run on
them.
Uncommitted changes known to files known by the git index will be
included in the snapshot if there are any.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1464755128-32490-5-git-send-email-famz@redhat.com
When config-host.mak is not found it is safe to assume SRC_PATH is ".".
So, it is okay to move inclusion of ruls.mak out of the ifeq condition.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-4-git-send-email-famz@redhat.com
Our dependency mechanism works like this:
* on first build there is neither a .o nor a .d
* we create the .d as a side effect of creating the .o
* for rebuilds we know when we need to update the .o,
which also updates the .d
This system requires that you're never in a situation where there is
a .o file but no .d (because then we will never realise we need to
build the .d, and we will not have the dependency information about
when to rebuild the .o).
This is working fine for our object files, but we also try to use it
for $TARGET/config-devices.mak (where the dependency file is
in $TARGET-config-devices.mak.d). Unfortunately "make clean" doesn't
remove config-devices.mak, which means that it puts us in the
forbidden situation of "object file exists but not its .d file".
This in turn means that we will fail to notice when we need to rebuild:
mkdir build/depbug
(cd build/depbug && '../../configure')
make -C build/depbug -j8
make -C build/depbug clean
echo "CONFIG_CANARY = y" >> default-configs/arm-softmmu.mak
make -C build/depbug
grep CANARY build/depbug/aarch64-softmmu/config-devices.mak
The CANARY token should show up in config-devices.mak but does not.
Fix this bug by making "make clean" delete the config-devices.mak files.
config-all-devices.mak doesn't have the same problem since it has
no .d file, but delete it too, since it is created by "make" and
logically should be removed by "make clean".
(Note that it is important not to remove config-devices.mak until
after we have recursively run 'make clean' in the subdirectories.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1463484451-22979-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The file was used only by older machine-types, and it is not
needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This converts the NBD block driver client to use the QIOChannelSocket
class for initial connection setup. The NbdClientSession struct has
two pointers, one to the master QIOChannelSocket providing the raw
data channel, and one to a QIOChannel which is the current channel
used for I/O. Initially the two point to the same object, but when
TLS support is added, they will point to different objects.
The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to
ensure the QIOChannel object classes are registered. The qemu-nbd
tool already did this.
In this initial conversion though, all I/O is still actually done
using the raw POSIX sockets APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an s390 boot rom which was used in s390-virtio machine.
but since commit 3538fb6f89
"s390x: remove s390-virtio machine", this file isn't used.
The only place it is referenced in the code is an unused
define ZIPL_FILENAME. There's also comment in hw/s390/ipl.c
which I'm modifying too, to refer to s390-ccw.img instead.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
And rename v9fs_marshal to v9fs_iov_marshal, v9fs_unmarshal to
v9fs_iov_unmarshal.
The rationale behind this change is that, this marshalling interface is
used both by virtio and proxy helper. Renaming files and functions to
reflect the true nature of this interface.
Xen transport is going to have its own marshalling interface.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Break out some generic functions for marshaling 9p state. Pure code
motion plus minor fixes for build system.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The rebuild of qapi-types.c/h is not correctly triggered
when qapi/crypto.json is changed because it was missing
from the list of files in the qapi-modules variable.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Start the new generic I/O channel framework by defining a
QIOChannel abstract base class. This is designed to feel
similar to GLib's GIOChannel, but with the addition of
support for using iovecs, qemu error reporting, file
descriptor passing, coroutine integration and use of
the QOM framework for easier sub-classing.
The intention is that anywhere in QEMU that almost
anywhere that deals with sockets will use this new I/O
infrastructure, so that it becomes trivial to then layer
in support for TLS encryption. This will at least include
the VNC server, char device backend and migration code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
ab59e3e introduced a fix for `make install` on w32 that involved
filtering out qemu-ga from $TOOLS install recipe so that we could
append $(EXESUF) to it before attempting to install the binary
via install-prog function.
install-prog takes a list of binaries to install to a particular
directory. If the list is empty it breaks. We guard against this
by ensuring $TOOLS is not empty prior to calling.
However, ab59e3e introduces extra filtering after this check which
can still result on us attempting to call install-prog with an
empty list of binaries. In particular, this occurs if we
build with the --disable-tools configure option, which results
in qemu-ga being the only member of $TOOLS.
Fix this by doing a simple s/qemu-ga/qemu-ga$(EXESUF)/ pass through
$TOOLS instead of filtering out qemu-ga to handle it seperately.
Reported-by: Steve Ellcey <sellcey@imgtec.com>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
fafcaf1 added a 'qemu-ga' install target on w32, which can be used
in place of the existing qemu-ga.exe target to also handle dealing
with other components such as DLLs for VSS/fsfreeze and generating
an MSI package if appropriate configure options are present.
As part of that, qemu-ga$(EXESUF) was removed from $TOOLS in favor
of this new qemu-ga target.
The install rule however relies on a direct mapping of the $TOOLS
entry to the actual resulting binary. In the case of w32, qemu-ga
is not identical to qemu-ga$(EXESUF), and the install recipe fails
to find the 'qemu-ga' binary.
Fix this by essentially remapping 'qemu-ga' back to 'qemu-ga.exe'
in the install recipe.
This raises the question of whether or not qemu-ga should continue
to live in TOOLS as opposed to its own special target, but as a
late fix for a regression in 2.5 this commit should be safer, since
we rely on qemu-ga's presence in $TOOLS in several places throughout
Makefile.
Reported-by: Stefan Weil <sw@weilnetz.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When using ivshmem devices, notifications between guests can be sent as
interrupts using a ivshmem-server (typical use described in documentation).
The client is provided as a debug tool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[fix a valgrind warning, option and server_close() segvs, extra server
headers includes, getopt() return type, out-of-tree build, use qemu
event_notifier instead of eventfd, fix x86/osx warnings - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently POSIX builds rely on 'qemu-ga' target to do qga-only
distributable build. On w32, as with most standalone binary targets,
we rely on 'qemu-ga.exe' target.
Unlike with POSIX, qemu-ga for w32 has a number of related targets
such as VSS DLL and MSI package. We can do the full distributable
qga-only build on w32 with:
make qemu-ga.exe
or:
make msi
To make that work, we tie VSS dependencies onto qemu-ga.exe.
However, in reality the DLL isn't part of the binary, so we use a
filter to pull them out of the LINK recipe, which attempts to link
against prereqs for binary targets. Additionally, it could be argued
that VSS is a separate distributable, and shouldn't be implied by
qemu-ga.exe binary target.
To avoid this, we can tie the VSS dependencies only to the 'msi'
target, but that would make it impossible to do a qga-only build of
the w32 distributable without building the 'msi' package, which was
supported in the past.
An alternative approach is to add a new target to build the whole
distributable. w32 allows us to use the same build target we use
on POSIX, 'qemu-ga', since the current binary-only target on w32
is 'qemu-ga.exe'.
To further simplify the build, we also make 'qemu-ga' build the MSI
package if the appropriate ./configure options are set, making the
full qga-only build the same on both POSIX and w32: `make qemu-ga`
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Steve Ellcey / Leon Alrae reported that QEMU fails to build when
the VPATH directory is outside of the GIT tree, and the system
emulators & tools build is disabled. eg
cd ..
mkdir build
cd build
../qemu/configure --disable-system --disable-tools
make
(...)
make[1]: *** No rule to make target `../qom/object.o', needed by `qemu-aarch64'. Stop.
make: *** [subdir-aarch64-linux-user] Error 2
The problem is due to the fact that some sub directory deps
were listed against SOFTMMU_SUBDIR_RULES instead of SUBDIR_RULES,
so were only processed for system emulators, not user emalutors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442570495-22029-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The uninstall keys include an option key "DisplayVersion" which we set
now. By default the version value is read from file VERSION, but it is
also possible to pass VERSION=#.#.# to make.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.
Use the library if found during configure or if --enable-smartcard.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV+Y0VAAoJEL/70l94x66DppAH/393irRPGYJiZqClXDmPZymd
Ilv+mKQIA+QSGiMaVoq0POWqvSa6oPOIOAK8BexhHDWPnxDSeAU9JzjrkwQILjD3
A5kFsR1mhw/oV8aZCsE926SUoY90VH7QP2r0iGdur1VV9DG7CUE8q95umJuU1FCo
hvGI2HjlAPvxSrO+Y5vu4ZNOa5XBiUoLodT0j+jNZfoNMx3irAqkJLPqTUuPT8np
jBeu1MtMe3wNjDBm3WMVZwkNEZ3YtuhRkBeggXqDIl1Jm9lq4Eitk7rtETXm6yHz
Vjp9uAF4en/72gXbELRXp+aWvESEABcouLZrdPV/yjOmQD2oTFC7sZrm1c5rZPw=
=MkK8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Linux header update and cleanup
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
# gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
nbd: release exp->blk after all clients are closed
checkpatch: Escape left braces in regex
monitor: uninclude cpu_ldst
include/exec: Move cputlb exec.c defs out
cputlb: Change tlb_set_dirty() arg to cpu
cputlb: move CPU_LOOP() for tlb_reset() to exec.c
translate: move real_host_page setting to -common
tcg: Move tci_tb_ptr to -common
tcg: split tcg_op_defs to -common
translate-all: Move tcg_handle_interrupt() to -common
cpu-exec: Migrate some generic fns to cpu-exec-common
qemu-char: Use g_new() & friends where that makes obvious sense
monitor: added generation of documentation for hmp-commands-info.hx
hmp-commands.hx: fix end of table info
monitor: remove target-specific code from monitor.c
hmp-commands-info: move info_cmds content out of monitor.c
i386/kvm: Hyper-v crash msrs set/get'ers and migration
kvm: Add kvm system event crash handler
cpu: Add crash_occurred flag into CPUState
target-i386: move asm-x86/hyperv.h to standard-headers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.
From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qom objects are currently added to common-obj-y
which is only linked into the system emulators. The
later crypto patches will depend on QOM infrastructure
and will also be used from tools binaries. Thus the QOM
objects are moved into a new qom-obj-y variable which
can be referenced when linking tools, system emulators
and tests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Future patches will be adding more crypto related APIs which
rely on QOM infrastructure. This creates a problem, because
QOM relies on library constructors to register objects. When
you have a file in a static .a library though which is only
referenced by a constructor the linker is dumb and will drop
that file when linking to the final executable :-( The only
workaround for this is to link the .a library to the executable
using the -Wl,--whole-archive flag, but this creates its own
set of problems because QEMU is relying on lazy linking for
libqemuutil.a. Using --whole-archive majorly increases the
size of final executables as they now contain a bunch of
object code they don't actually use.
The least bad option is to thus not include the crypto objects
in libqemuutil.la, and instead define a crypto-obj-y variable
that is referenced directly by all the executables that need
this code (tools + softmmu, but not qemu-ga). We avoid pulling
entire of crypto-obj-y into the userspace emulators as that
would force them to link to gnutls too, which is not required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'msi' target reports error if we attempt to use it when QEMU hasn't
been ./configure'd to enable it. The parenthesis cause an interpreter
error if we don't enclose the error in quotes.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.
Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.
Now we can build qemu-ga MSI package with:
./configure ...
make qemu-ga.exe
make msi
or simply:
./configure ...
make msi
and no longer need to do a full build beforehand.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a simple man page for the qemu agent.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*squashed in review comments from Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously, if building out-of-tree, the MSI build would fail since
it wasn't able to find the needed files.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* fixed up commit msg formating
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We want to have uniform build messages, so fix some messages
which did not follow the standard pattern.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cscope and TAGS files work in source directory rather than the build
directory, also, don't ask users to run configure first, because they
may have an out of tree build.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
New options were added to enable Windows MSI installation package
creation:
Option --enable-guest-agent-msi, like the name suggests, enables building
Windows MSI package for QEMU guest agent; option --disable-guest-agent-msi
disables MSI package creation; by default, no MSI package is created
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-5-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The target-x86_64.conf sysconfig file has been empty and essentially ignored
now for several years. This change removes the unused file to enable moving
towards a stateless configuration.
Signed-off-by: Ikey Doherty <michael.i.doherty@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Mandatory option is silly, and the error handling is missing: the
programs crash when -i isn't supplied. Make it an argument, and check
it properly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
perl script to transform shader programs into c include files with
static string constands containing the shader programs, so we can
easily embed them into qemu. Also some Makefile logic for them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
On BSDs "make" is typically BSD make, while "gmake" is GNU make.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <1427911118-21905-1-git-send-email-emaste@freebsd.org>
[Fix $(INSTALLER) too as reported by Fam Zheng. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The .d file name must match exactly what is used in the SUBDIR_DEVICES_MAK_DEP
variable. Instead of making assumptions in the make_device_config.sh script,
just pass it in.
Similarly, the makefile target may not match the output file name, because
Makefile uses a temporary file. Instead of making assumptions on what the
Makefile does, emit the config-devices.mak file to stdout, and use the
passed-in destination as the makefile target
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
V=1 should show what's going on, it's not nice
to silence things unconditionally.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1424332114-13440-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables parallel building of QEMU in MSYS+MinGW environment.
Currently an attempt to build QEMU in parallel fails on generation of
version.lo (and version.o too).
The cause of the failure is that when listing prerequisites "Makefile"
references "config-host.h" by absolute path in some rules and by relative
path in others. Make cannot figure out that these references points to the
same file which leads to the race: the generation of "version.*" which
requires "$(BUILD_DIR)/config-host.h" is launched in parallel with the
generation of "config-host.h" needed by other "Makefile" targets.
This patch removes "$(BUILD_DIR)/" prefix from corresponding prerequisite
of "version.*". There is no other prerequisites "$(BUILD_DIR)/config-host.h"
found.
Also note that not every version of MSYS is able to build QEMU in parallel,
see: "http://sourceforge.net/p/mingw/bugs/1950/". The suggested version is
1.0.17.
Signed-off-by: Vasily Efimov <real@ispras.ru>
Message-Id: <1424264377-5992-1-git-send-email-real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
config.status and tests/qemu-iotests/common.env are generated files
that should be deleted during 'make distclean'.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Install the ./trace-events file into the data directory. This file
contains the list of trace events that were built into QEMU at
compile-time.
The file is a handy reference for the set of trace events that the QEMU
binary was built with. It is also needed by the simpletrace.py tool
that parses binary trace data either emitted from QEMU when built with
--enable-trace-backend=simple or by the SystemTap simpletrace script
that QEMU provides.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1411486175-3017-1-git-send-email-stefanha@redhat.com
Generate header "trace/generated-tcg-tracers.h" with the necessary routines for
tracing events in guest code:
* trace_${event}_tcg
Convenience wrapper that calls the translation-time tracer
'trace_${event}_trans', and calls 'gen_helper_trace_${event}_exec to
generate the TCG code to later trace the event at execution time.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates header "trace/generated-helpers-wrappers.h" with definitions for TCG
helper wrappers.
These wrappers ('gen_helper_trace_${event}_exec_wrapper') transform mixed native
and TCG argument types to TCG types and call the actual TCG helpers
('gen_helper_trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.c" with TCG helper definitions to trace
events in guest code at execution time.
The helpers ('helper_trace_${event}_exec_proxy') cast the TCG-compatible native
argument types to their original types (as defined in "trace-events") and call
the tracing routine ('trace_${event}_exec').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Generates file "trace/generated-helpers.h" with TCG helper declarations to trace
events in guest code at execution time ('trace_${event}_exec_proxy').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These three objects are repeated in multiple times in Makefiles. Let's
just add them to libqemuutil.a, and don't list explicitly elsewhere.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use common rule (macro) to install and strip binaries, and use
it in all places where we install binaries, instead of fixing
bugs like 1319493 in every place.
(This fixes https://bugs.launchpad.net/bugs/1319493)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qapi-event.py will parse the schema and generate qapi-event.c, then
the API in qapi-event.c can be used to handle events in qemu code.
All API have prefix "qapi_event".
The script mainly includes two parts: generate API for each event
define, generate an enum type for all defined events.
Since in some cases the real emit behavior may change, for example,
qemu-img would not send a event, a callback layer is used to
control the behavior. As a result, the stubs at compile time
can be saved, the binding of block layer code and monitor code
will become looser.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qapi-schema.json has been split into three smaller JSON files in qapi/.
Add them as dependencies for the code generation in the Makefile, so
changes to them will result in a rebuilt of all QAPI-dependent code.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/bonzini/configure:
libcacard: remove libcacard-specific CFLAGS and LIBS from global vars
build: simplify and fix fix-obj-vars
build: convert some obj-specific CFLAGS to use new foo.o-cflags syntax
build: add support for per-object -cflags and -libs to all rules
Makefile: use $(INSTALL_LIB) for modules not $(INSTALL_PROG)
Makefile.target: use $(INSTALL_PROG) for installing, not $(INSTALL)
Makefile: strip tools and modules too
build: simplify Makefile.target around unnest-vars invocations
build: simplify Makefile.target a bit, use just one rule for softmmu
build: Fix per-object variables for Makefile.target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use an explicit input file on the command-line instead of reading from standard
input.
It also outputs the proper file name when there's an error.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have $(INSTALL_LIB) which is the same as $(INSTALL_PROG) but
uses correct permissions. Loadable objects (modules) are like
shared libraries, not like programs.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some
places (for example, Makefile.target), but not all of them.
There are a few places remain in main Makefile which still
uses $(STRIP_OPT). Replace these places with $(STRIP) too.
While at it, simplify variable pattern substitution of the
surrounding places, change $(patsubst pat,rep,$(var)) into
$(var:pat=rep) which is much easier to read (this is probably
a good idea to do everywhere).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The build rule for qga/vss-win32/qga-vss.dll is broken by commit
ba1183da9a, because it misses
qga-vss-dll-obj-y in the list of nested variables.
This fixes build of qga-vss.dll by adding qga-vss-dll-obj-y to the list.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When installing modules (when --enable-modules is specified for
./configure), Makefile uses the following construct to replace all
slashes with dashes in module name:
${s//\//-}
This is a bash-specific substitution mechanism. POSIX does not
have it, and some operating systems (for example Debian) does not
implement this construct in default shell (for example dash).
Use more traditional way to perform the substitution: use `tr' tool.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1396707946-21351-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a dangerous bug: "make clean" after "make distclean" will
delete every single file including those under .git, if you do in-tree
build!
Rationale: A first "make distclean" will unset $(DSOSUF), a following
"make distclean" or "make clean" will find all the files and delete it.
Fix it by explicitly typing the file extensions here, and combine
multiple find invocations into one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1395020122-4957-1-git-send-email-famz@redhat.com
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass all the relevant sub-directory make variables.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20140120112153.5685.30949.stgit@fimbulvetr.bsc.es
* remotes/mcayland/qemu-sparc:
sun4m: Add Sun CG3 framebuffer initialisation function
sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM
sun4m: fix slavio timer RUN/STOP bit
sun4m: Set HostID in NVRAM
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Comment from Makefile.objs:
The system emulation needs this dependency (which was missing in Makefile),
otherwise builds without tools (or massive parallel builds) fail.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
$(common-obj-m) will include $(block-obj-m), like $(common-obj-y) does
for $(block-obj-y).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add generation of new files for LTTng ust.
Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The default machine-type (pc-i440fx-2.0) now requires bios-256k.bin, but
"make install" isn't installing it, so qemu-system-x86_64 won't run out
of the box. Add it to BLOBS so it gets installed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: William Dauchy <william@gandi.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.
SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.
The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds Czech keyboard layout to available keymap files
and Makefile.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
This command will package the clean operations in tests. Now root Makefile
simply calls the command and do not care the details of it any more. Original
the built binaries for test will not be removed, now they will be deleted
in clean operation.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
This file should be generated in the BUILD_DIR, as all other docs.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
