Coverity doesn't like the code in load_symbols() which assumes
it can use 'int' for a variable that might hold an offset into
the guest ELF file, because in a 64-bit guest that could
overflow. Guest binaries with 2GB sections aren't very likely
and this isn't a security issue because we fully trust the
guest linux-user binary anyway, but we might as well use the
right types, which will placate Coverity. Use uint64_t to
hold section sizes, and bail out if the symbol table is too
large rather than just overflowing an int.
(Coverity issue CID1005776)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1486249533-5260-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A segfault is noticed when an emulated program uses any of ucontext
regs fields. Risu detected this issue in the following operation when
handling a signal:
ucontext_t *uc = (ucontext_t*)uc;
uc->uc_mcontext.regs->nip += 4;
but this works fine:
uc->uc_mcontext.gp_regs[PT_NIP] += 4;
This patch set regs to a valid location as well as other sigcontext
fields.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1485900317-3256-1-git-send-email-joserz@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
tests/tcg/mmap test fails with values other than default target page
size. When creating a map beyond EOF, extra anonymous pages are added up
to the target page boundary. Currently, this operation is performed only
when qemu_real_host_page_size < TARGET_PAGE_SIZE, but it should be
performed if the configured page size (qemu -p) is larger than
qemu_real_host_page_size too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[pranith: dropped checkpatch changes]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170119151533.29328-2-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Version: GnuPG v1
iQEcBAABAgAGBQJYo88zAAoJEO8Ells5jWIRal0H/3iRDDvo6lj+mjQySNBOdMZJ
BGqqG6SqqX6kJaoBldAyIyVpRWOrVPZGkX4HfUQkAcdWtv5QRMselyhOlhxJRYD8
jUixpxX2oXD/gokkbsMJOH5KMPea5E7J/IBWC9c+Rgh6VV91r0/pML68piA8sDqU
GZpNVhCWwUBEx4ZWy1wdKpreEsNy7fb3MuWmqFDNGSLEN2/JCqx+mrY+WvagmGAM
HpmcS4Sflm5OUi7dcedB7gcYCbeIAIjaxKpjWtHaHlyFmdFlwDXFFEXlEHjrpjqw
SrYacth/Xj/lcbRFQ65dMe7lxtKvt8a9PW4RVD/Iiw3bHj9bEmdGd+Ki815DcQg=
=O8NL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Wed 15 Feb 2017 03:46:59 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: e1000e: fix an infinite loop issue
net: imx: limit buffer descriptor count
colo-compare: sort TCP packet queue by sequence number
net: e1000e: fix dead code in e1000e_write_packet_to_guest
net: Mark 'vlan' parameter as deprecated
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This issue is like the issue in e1000 network card addressed in
this commit:
e1000: eliminate infinite loops on out-of-bounds transfer start.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
i.MX Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set an upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Improve efficiency of TCP packet comparison.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because is_first is declared inside a loop, it is always true. The store
is dead, and so is the "else" branch of "if (is_first)". is_last is
okay though.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'vlan' parameter is a continuous source of confusion for the users,
many people mix it up with the more common term VLAN (the link layer
packet encapsulation), and even if they realize that the QEMU 'vlan' is
rather some kind of network hub emulation, there is still a high risk
that they configure their QEMU networking in a wrong way with this
parameter (e.g. by hooking NICs together, so they get a 'loopback'
between one and the other NIC).
Thus at one point in time, we should finally get rid of the 'vlan'
feature in QEMU. Let's do a first step in this direction by declaring
the 'vlan' parameter as deprecated and informing the users to use the
'netdev' parameter instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add QEMU_IFLA_GSO_MAX_SEGS and QEMU_IFLA_GSO_MAX_SIZE
in host_to_target_data_link_rtattr().
These two messages are sent by the host kernel when
we use "sudo".
Found with qemu-m68k and Debian etch-m68k (sudo 1.6.8p12-4) and
host kernel 4.7.6-200.fc24.x86_64
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1477530049-15676-1-git-send-email-laurent@vivier.eu>
If fourth argument is NULL it should be passed without
using lock_user function which would, in that case, return
EFAULT, and system call supports passing NULL as fourth argument.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Calculation of 64-bit offset was not correct for all cases.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit adds necessary conversion of argument passed to inotify_init1.
inotify_init1 flags can be IN_NONBLOCK and IN_CLOEXEC which rely on O_NONBLOCK
and O_CLOEXEC and those can have different values on different platforms.
Signed-off-by: Lena Djokic <Lena.Djokic@rt-rk.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The LT instruction was added in the extended immediate facility
introduced with the z9-109 processor.
Cc: Riku Voipio <riku.voipio@iki.fi>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: c9bc3437a9
Suggested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The HW does not special-case r0, but the ABI specifies that r0 should
contain 0. If we expose this fact to the optimizer, we can simplify
a lot of the generated code. We must of course verify that r0==0, but
that is trivial to do with a TB flag.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The NPC SPR is really only supposed to be used for FPGA debugging.
It contains the same contents as PC, unless one plays games. Follow
the or1ksim implementation in flushing delayed branch state when it
is changed.
The PPC SPR need not be updated every instruction, merely when we
exit the TB or attempt to read its contents.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows the tcg optimizer to see, and fold, all of the
constants involved in a GOT base register load sequence.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Note that the specification for lf.madd.s is confused. It's
the only mention of supposed FPMADDHI/FPMADDLO special registers.
On the other hand, or1ksim implements a somewhat normal non-fused
multiply and add. Mirror that.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Significantly simplifies the implementation of the use of MAC.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Not documented as disabled for user mode.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This avoids having to keep merging and extracting the flag from SR.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Decoding the opcodes in the right order reduces by 100+ lines.
Also, it happens to put the opcodes in the same order as Chapter 17.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix incorrect overflow calculation. Move overflow exception check
to a helper function, to eliminate inline branches. Remove some
incorrect special casing of R0. Implement multiply inline.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The architecture manual is consistent in using "I" for signed
fields and "K" for unsigned fields. Mirror that.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoids warnings from unused variables etc.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
I am working on testing instruction emulation patches for the linux
kernel. During testing I found these 2 issues:
- sets DSX (delay slot exception) but never clears it
- EEAR for illegal insns should point to the bad exception (as per
openrisc spec) but its not
This patch fixes these two issues by clearing the DSX flag when not in a
delay slot and by setting EEAR to exception PC when handling illegal
instruction exceptions.
After this patch the openrisc kernel with latest patches boots great on
qemu and instruction emulation works.
Cc: qemu-trivial@nongnu.org
Cc: openrisc@lists.librecores.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Message-Id: <20170113220028.29687-1-shorne@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Threads work much better when you set the TLS register.
This was fixed in the upstream kernel for Linux 4.9.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We need to handle EXCP_DEBUG and EXCP_INTERRUPT.
We need to send signals to the guest using queue_signal.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Amit: migration: remove myself as maintainer
MAINTAINERS: update my email address
Ashijeet: migrate: Introduce zero RAM checks to skip RAM migration
Pavel: Postcopy release RAM
Halil: consolidate VMStateField.start
Hailiang: COLO: fix setting checkpoint-delay not working properly
COLO: Shutdown related socket fd while do failover
COLO: Don't process failover request while loading VM's state
Me:
migration: Add VMSTATE_UNUSED_VARRAY_UINT32
migration: Add VMSTATE_WITH_TMP
tests/migration: Add test for VMSTATE_WITH_TMP
virtio-net VMState conversion and new VMSTATE macros
-----BEGIN PGP SIGNATURE-----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=weIO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170213a' into staging
Migration
Amit: migration: remove myself as maintainer
MAINTAINERS: update my email address
Ashijeet: migrate: Introduce zero RAM checks to skip RAM migration
Pavel: Postcopy release RAM
Halil: consolidate VMStateField.start
Hailiang: COLO: fix setting checkpoint-delay not working properly
COLO: Shutdown related socket fd while do failover
COLO: Don't process failover request while loading VM's state
Me:
migration: Add VMSTATE_UNUSED_VARRAY_UINT32
migration: Add VMSTATE_WITH_TMP
tests/migration: Add test for VMSTATE_WITH_TMP
virtio-net VMState conversion and new VMSTATE macros
# gpg: Signature made Mon 13 Feb 2017 17:36:39 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170213a:
virtio/migration: Migrate virtio-net to VMState
tests/migration: Add test for VMSTATE_WITH_TMP
migration: Add VMSTATE_WITH_TMP
migration: Add VMSTATE_UNUSED_VARRAY_UINT32
COLO: Don't process failover request while loading VM's state
COLO: Shutdown related socket fd while do failover
COLO: fix setting checkpoint-delay not working properly
migration: consolidate VMStateField.start
migrate: Introduce zero RAM checks to skip RAM migration
migration: discard non-dirty ram pages after the start of postcopy
add 'release-ram' migrate capability
migration: add MigrationState arg for ram_save_/compressed_/page()
MAINTAINERS: update my email address
migration: remove myself as maintainer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170203160651.19917-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merge fix against Halil's removal of the '_start' field in
VMSTATE_VBUFFER_MULTIPLY
Add a test for VMSTATE_WITH_TMP to tests/test-vmstate.c
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170203160651.19917-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
VMSTATE_WITH_TMP is for handling structures where some calculation
or rearrangement of the data needs to be performed before the data
hits the wire.
For example, where the value on the wire is an offset from a
non-migrated base, but the data in the structure is the actual pointer.
To use it, a temporary type is created and a vmsd used on that type.
The first element of the type must be 'parent' a pointer back to the
type of the main structure. VMSTATE_WITH_TMP takes care of allocating
and freeing the temporary before running the child vmsd.
The post_load/pre_save on the child vmsd can copy things from the parent
to the temporary using the parent pointer and do any other calculations
needed; it can then use normal VMSD entries to do the actual data
storage without having to fiddle around with qemu_get_*/qemu_put_*
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170203160651.19917-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
