KVM only supports MSIX table size up to 256 vectors,
but some assigned devices support more vectors,
at the moment attempts to assign them fail with EINVAL.
Tweak the MSIX capability exposed to guest to limit table size
to a supported value.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When mmapping memory for the MSI-X table failsthe dev->msix_table is
not set to NULL and assigned_dev_unregister_msix_mmio() will cause
a segfault when trying to munmap it.
Signed-off-by: Gonglei Arei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Among the callers, only assigned_initfn() should set the monitor's stored
error. Other callers may run in contexts where the monitor's stored error
makes no sense. For example:
assigned_dev_pci_write_config()
assigned_dev_update_msix()
assign_intx()
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also, change the return type to "void"; the function is static (with a
sole caller) and the negative errno values are not distinguished from each
other.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The return type is also changed from "int" to "void", because it was used
in a success vs. failure sense only (the caller didn't distinguish error
codes from each other, and even assigned_dev_register_msix_mmio() masked
mmap()'s errno values with a common -EFAULT).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Propagate any errors while adding PCI capabilities to
assigned_device_pci_cap_init(). We'll continue the propagation upwards
when assigned_device_pci_cap_init() becomes a leaf itself (when none of
its callees will report errors internally any longer when detecting and
returning them).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Rename check_irqchip_in_kernel() to verify_irqchip_in_kernel(), so that
the name reflects our expectation better. Rather than returning a bool,
make it do nothing or set an Error.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
get_real_id() has two thin wrappers (and no other callers),
get_real_vendor_id() and get_real_device_id(); it's easiest to convert
them in one fell swoop.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This allows us to report the entire error with one error_report() call,
easing future error propagation.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Propagate any errors in monitor fd handling up to get_real_device(), and
report them there. We'll continue the propagation upwards when
get_real_device() becomes a leaf itself (when none of its callees will
report errors internally any longer when detecting and returning an
error).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
eviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* remotes/sstabellini/xen-140507-2:
xen_disk: add discard support
pass an inclusive address range to xc_domain_pin_memory_cacheattr
xen: factor out common functions
xen: move Xen HVM files under hw/i386/xen
xen: move Xen PV machine files to hw/xenpv
qemu-xen: free all the pirqs for msi/msix when driver unload
exec: Limit translation limiting in address_space_translate to xen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the "boilerplate" necessary for subsequent patches to
simply drop in compat_props for pc machines 2.0 and older.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi build tried to add offset of hpet table to rsdt even when hpet was
disabled. If no tables follow hpet, this could lead to a malformed
rsdt.
Fix it up.
To avoid such errors in the future, rearrange code slightly to make it
clear that acpi_add_table stores the offset of the following table - not
of the previous one.
Reported-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Object returned by object_property_get_qobject needs its reference counter to
be decremented when it is not needed by caller anymore.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Build an aggregate set of smbios tables and an entry point structure.
Insert tables and entry point into fw_cfg respectively under
"etc/smbios/smbios-tables" and "etc/smbios/smbios-anchor".
Machine types <= 2.0 will for now continue using field-by-field
overrides to SeaBIOS defaults, but for machine types 2.1 and up we
expect the BIOS to look for and use the aggregate tables generated
by this patch.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
[ kraxel: fix 32bit build ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace existing smbios_check_collision() functionality with
a pair of bitmaps: have_binfile_bitmap and have_fields_bitmap.
Bits corresponding to each smbios type are set by smbios_entry_add(),
which also uses the bitmaps to ensure that binary blobs and field
values are never accepted for the same type.
These bitmaps will also be used in the future to decide whether
or not to build a full table for a given smbios type.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function smbios_set_defaults() uses a repeating code pattern
for each field. This patch replaces that pattern with a macro.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename the following symbols:
- smbios_set_type1_defaults() to the more general smbios_set_defaults();
- bool smbios_type1_defaults to the more general smbios_defaults;
- smbios_get_table() to smbios_get_table_legacy();
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the following two functions:
- e820_get_num_entries() - query the size of the e820 table
- e820_get_entry() - grab an entry matching a given set of criteria
This interface is currently necessary for creating type 19
(memory array mapped address) structures in smbios.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At the moment, 2.1 and 2.0 machines are identical.
As several people are working on incompatible changes
to the PC machine, collaboration will be made easier
by merging this place-holder.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These functions don't need type casts (as does cpu_physical_memory_rw)
and also make the code better readable.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix typo in build_append_int() which causes integer
truncation when it's in range 0x{F-1}FFFF by packing it
as WordConst instead of required DWordConst.
In partucular this fixes a regression: hotplug in slots 16,17,18 and 19
didn't work, since SSDT had code like this:
If (And (Arg0, 0x0000))
{
Notify (S80, Arg1)
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
commit f2ccc311df
dsdt: tweak ACPI ID for hotplug resource device
changes the DSDT, update hex files to match
Otherwise the fix is only effective if QEMU is built
with iasl.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI0004 seems too new:
Windows XP complains about an unrecognized device.
This is a regression since 1.7.
Use PNP0A06 instead - Generic Container Device.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTNWRMAAoJECgfDbjSjVRp6CoH/A3iLi+jkV4EhQQzU8U6vOmi
PIV71600rZd29u4hk6w5pyev6yyXSBwatmWk+vzHvINUIcc22KUue+773nXPW/fH
3oIgTwjKndE98V5vTSeOgOdD7iFuWlcgHQHLXXMsgpY1hVMS/1kidZdb+36o8euI
kdE+AxYGXS8Z3oBRFfROpT4v0UZ17qIaL4tqA4JJWMh/A3Qp3HY+ffU3ODAvKSQw
KWVWmKvbh82I25HOvALoMwtu26x48jhzu586pHBuEsHgTJKKBrAUdWph+2f1eSC+
xTgduKWEgK6Z9dCYDQwDaM8CqNzjqVzfgRu0RCSHtgTxCWaIN3dQbxEFi7WQ2Yo=
=dfqJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8dcf525abc
acpi-build: append description for non-hotplug
appended description for all occupied non hotpluggable PCI slots.
However the bridge devices are already added to SSDT,
adding them again will create an incorrect SSDT table.
Fixed by skipping the pci bridge devices, marking them as 'system'.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add U suffix to avoid undefined behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ACPI specification says:
The ASL compiler can emit two different AML opcodes for a Package
declaration, either PackageOp or VarPackageOp. For small, fixed-length
packages, the PackageOp is used and this opcode is compatible with ACPI
1.0. A VarPackageOp will be emitted if any of the following conditions
are true:
. The NumElements argument is a TermArg that can only be resolved at
runtime.
. At compile time, NumElements resolves to a constant that is larger than
255.
. The PackageList contains more than 255 initializer elements.
Note: The ability to create variable-sized packages was first introduced
in ACPI 2.0. ACPI 1.0 only allowed fixed-size packages with up to 255 elements.
So the spec seems to say a fixed value up to 255 must always
be used with PackageOp and not VarPackageOp, and some guests
(windows up to win2k8) seem to interpret it like this.
Let's do just this, choosing the encoding depending on
the number of elements.
Fixes 9bcc80cd71
(i386/acpi-build: allow more than 255 elements in CPON).
https://bugs.launchpad.net/bugs/1297651
Reported-by: Robert Hu <robert.hu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
More small fixes all over the place.
Notably fixes for big-endian hosts by Marcel.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTMAvDAAoJECgfDbjSjVRptUEIAMYNC76eQSPNoVv9vP/XaTT1
c9TE67jo6HfxO7JaHSishyaf0bNrGIske+ua3J4NbiEAHnX22SDjn0o/CmX+tbjb
n70hpjF+KNgt0SR/Wxsl8nOa+nwsrbrlv/ReN7UehGicH+Af2OR65PZFwKwC3pjF
nupmucOmCBQzcmWDzx+DgSXulh02bfmpRHJo/EMhg7RXnkdNPnlwh5klycotJVgW
ggnY9IRuPr1m4Aq4V7wN/I8kIpkcAJxF5RlxdyopsdQtklLItSRi4xiMJlkhIPjA
lLdkOiFnVFKSggiVy9LFTdQWtGog1H4sVypM6J6Z2zOIKQsJFvHMpCrbcE8+7CY=
=C8sW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,test bug fixes
More small fixes all over the place.
Notably fixes for big-endian hosts by Marcel.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 24 Mar 2014 10:41:07 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi-test: do not fail if iasl is broken
vl.c: Use MAX_CPUMASK_BITS macro instead of hardcoded constant
sysemu.h: Document what MAX_CPUMASK_BITS really limits
acpi: fix endian-ness for table ids
acpi-test: signature endian-ness fixes
i386/acpi-build: support hotplug of VCPU with APIC ID 0xFF
acpi-test: rebuild SSDT
i386/acpi-build: allow more than 255 elements in CPON
pc: Refuse max_cpus if it results in too large APIC ID
acpi: Don't use MAX_CPUMASK_BITS for APIC ID bitmap
acpi: Assert sts array limit on AcpiCpuHotplug_add()
pc: Refuse CPU hotplug if the resulting APIC ID is too large
acpi: Add ACPI_CPU_HOTPLUG_ID_LIMIT macro
acpi-test: update expected SSDT files
acpi-build: fix misaligned access
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
when using signature for table ID, we forgot to byte-swap it.
signatures are really ASCII strings, let's treat them as such.
While at it, get rid of most of _SIGNATURE macros.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Building on the previous patch, raise the maximal count of processor
objects / NTFY branches / CPON elements from 255 to 256. This allows the
VCPU with APIC ID 0xFF to be hotplugged.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The build_ssdt() function builds a number of AML objects that are related
to CPU hotplug, and whose IDs form a contiguous sequence of APIC IDs.
(APIC IDs are in fact discontiguous, but this is the traditional
interface: build a contiguous sequence from zero up that covers all
possible APIC IDs.) These objects are:
- a Processor() object for each VCPU,
- a NTFY method, with one branch for each VCPU,
- a CPON package with one element (hotplug status byte) for each VCPU.
The build_ssdt() function currently limits the *count* of processor
objects, and NTFY branches, and CPON elements, in 0xFF (see the assignment
to "acpi_cpus"). This allows for an inclusive APIC ID range of [0..254].
This is incorrect, because the highest APIC ID that we otherwise allow a
VCPU to take is 255.
In order to extend the maximum count to 256, and the traversed APIC ID
range correspondingly to [0..255]:
- the Processor() objects need no change,
- the NTFY method also needs no change,
- the CPON package must be updated, because it is defined with a
DefPackage, and the number of elements in such a package can be at most
255. We pick a DefVarPackage instead.
We replace the Op byte, and the encoding of the number of elements.
Compare:
DefPackage := PackageOp PkgLength NumElements PackageElementList
DefVarPackage := VarPackageOp PkgLength VarNumElements PackageElementList
PackageOp := 0x12
VarPackageOp := 0x13
NumElements := ByteData
VarNumElements := TermArg => Integer
The build_append_int() function implements precisely the following TermArg
encodings (a subset of what the ACPI spec describes):
TermArg := DataObject
DataObject := ComputationalData
ComputationalData := ConstObj | ByteConst | WordConst | DWordConst
directly encoded in the function, with build_append_byte():
ConstObj := ZeroOp | OneOp
ZeroOp := 0x00
OneOp := 0x01
call to build_append_value(..., 1):
ByteConst := BytePrefix ByteData
BytePrefix := 0x0A
ByteData := 0x00 - 0xFF
call to build_append_value(..., 2):
WordConst := WordPrefix WordData
WordPrefix := 0x0B
WordData := ByteData[0:7] ByteData[8:15]
call to build_append_value(..., 4):
DWordConst := DWordPrefix DWordData
DWordPrefix := 0x0C
DWordData := WordData[0:15] WordData[16:31]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This changes the PC initialization code to reject max_cpus if it results
in an APIC ID that's too large, instead of aborting or erroring out when
it is already too late.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MAX_CPUMASK_BITS is a limit for max_cpus and CPU indexes, not for APIC
IDs.
ACPI_CPU_HOTPLUG_ID_LIMIT is the right macro for the limit on APIC IDs
on the ACPI and CPU hotplug code.
There are no functional changes introduced by this patch, as
MAX_CPUMASK_BITS + 1 == 255 + 1 == 256 == ACPI_CPU_HOTPLUG_ID_LIMIT.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI CPU hotplug code requires APIC IDs to be smaller than
ACPI_CPU_HOTPLUG_ID_LIMIT, so enforce the limit before trying to hotplug
a new vCPU, returning an error instead of crashing.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When on KVM mode, enable x2apic by default on all CPU models.
Normally we try to keep the CPU model definitions as close as the real
CPUs as possible, but x2apic can be emulated by KVM without host CPU
support for x2apic, and it improves performance by reducing APIC access
overhead. x2apic emulation is available on KVM since 2009 (Linux
2.6.32-rc1), there's no reason for not enabling x2apic by default when
running KVM.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of the feature-specific disable_kvm_pv_eoi() function, create a
more general function that can be used to disable other feature bits in
machine-type compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
casting an unaligned address to e.g.
uint32_t can trigger undefined behaviour in C.
Replace cast + assignment with memcpy.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since
commit 04920fc0fa
loader: store FW CFG ROM files in RAM
RAM MRs including ROM files in FW CFGs are created
and named using the file basename.
This becomes problematic if these names are
supplied by user, since the basename might not
be unique.
There are two cases we care about:
- option-rom flag.
- option ROM for devices. This triggers e.g. when
using rombar=0.
At the moment we get an assert. E.g
qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom
/usr/share/ipxe.efi/8086100e.rom
RAMBlock "/rom@genroms/8086100e.rom" already registered, abort!
This is a regression from 1.6.
For now let's keep it simple and just avoid creating the
MRs in case of option ROMs.
when using 1.7 machine types, enable
option ROMs in RAM to match that version.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
we put copy of ROMs in MR for migration.
but the name rom_in_ram makes one think we
load it in guest RAM.
Rename has_mr to make intent clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.
I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:
Hardware -> PCI Cards:
Card Type Driver Installed Slot
*ethernet Ethernet Controller Yes PCI Slot 2
pci8086,2934 USB UHC Yes PCI Slot 29
ethernet:
Type: Ethernet Controller
Driver Installed: Yes
MSI: No
Bus: PCI
Slot PCI Slot 2
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
Hardware -> Ethernet Cards
ethernet:
Type: Ethernet Controller
Bus: PCI
Slot PCI Slot 2
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
BSD name: en0
Kext name: AppleIntel8254XEthernet.kext
Location: /System/Library/Extensions/...
Version: 3.1.1b1
After commit 99fd437dee, users get:
Hardware -> PCI Cards:
This computer doesn't contain any PCI cards. If you installed PCI
cards, make sure they're properly installed.
Hardware -> Ethernet Cards
ethernet:
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x8086
Device ID: 0x100e
Subsystem Vendor ID: 0x1af4
Subsystem ID: 0x1100
Revision ID: 0x0003
BSD name: en0
Kext name: AppleIntel8254XEthernet.kext
Location: /System/Library/Extensions/...
Version: 3.1.1b1
Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.
To fix, append description for all occupied non hotpluggable PCI slots.
One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.
Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also update generated dsdt and pcihp hex dump files.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we have 2 separate qdev devices that both create a qbus of the
same type without specifying a bus name or device name, we end up
with two buses of the same name, such as ide.0 on the Mac machines:
dev: macio-ide, id ""
bus: ide.0
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
If we now spawn a device that connects to a ide.0 the last created
bus gets the device, with the first created bus inaccessible to the
command line.
After some discussion on IRC we concluded that the best quick fix way
forward for this is to make automated bus-class type based allocation
count a global counter. That's what this patch implements. With this
we instead get
dev: macio-ide, id ""
bus: ide.1
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
on the example mentioned above.
This also means that if you did -device ...,bus=ide.0 you got a device
on the first bus (the last created one) before this patch and get that
device on the second one (the first created one) now. Breaks
migration unless you change bus=ide.0 to bus=ide.1 on the destination.
This is intended and makes the bus enumeration work as expected.
As per review request follows a list of otherwise affected boards and
the reasoning for the conclusion that they are ok:
target machine bus id times
------ ------- ------ -----
aarch64 n800 i2c-bus.0 2
aarch64 n810 i2c-bus.0 2
arm n800 i2c-bus.0 2
arm n810 i2c-bus.0 2
-> Devices are only created explicitly on one of the two buses, using
s->mpu->i2c[0], so no change to the guest.
aarch64 vexpress-a15 virtio-mmio-bus.0 4
aarch64 vexpress-a9 virtio-mmio-bus.0 4
aarch64 virt virtio-mmio-bus.0 32
arm vexpress-a15 virtio-mmio-bus.0 4
arm vexpress-a9 virtio-mmio-bus.0 4
arm virt virtio-mmio-bus.0 32
-> Makes -device bus= work for all virtio-mmio buses. Breaks
migration. Workaround for migration from old to new: specify
virtio-mmio-bus.4 or .32 respectively rather than .0 on the
destination.
aarch64 xilinx-zynq-a9 usb-bus.0 2
arm xilinx-zynq-a9 usb-bus.0 2
mips64el fulong2e usb-bus.0 2
-> Normal USB operation not affected. Migration driver needs command
line to use the other bus.
i386 isapc ide.0 2
x86_64 isapc ide.0 2
mips mips ide.0 2
mips64 mips ide.0 2
mips64el mips ide.0 2
mipsel mips ide.0 2
ppc g3beige ide.0 2
ppc mac99 ide.0 2
ppc prep ide.0 2
ppc64 g3beige ide.0 2
ppc64 mac99 ide.0 2
ppc64 prep ide.0 2
-> Makes -device bus= work for all IDE buses. Breaks migration.
Workaround for migration from old to new: specify ide.1 rather than
ide.0 on the destination.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
readlink() doesn't write a terminating null byte.
assign_failed_examine() passes the unterminated string to strrchr().
Oops. Terminate it.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS+Jg2AAoJECgfDbjSjVRp2hIH/3PezOqYAJlp1LzHPYgTII5R
ZWdlHWJODB5QKGuDnJ0rKTZn+9n4f27Q7ynwqrodrLNtzglfmPUwtjTb52vbd1yh
qJ7BtvGIewUEjTPVs2feipb75jFZFhvIU46F1jPJAiaNKG0nl6zwVHn5XfFqesv2
4TlHAoqYvpUUuFcG7Qu+hREUrjb/tdxwP8EYM4qDPOSxguS2R2+3/17BVlPDQGia
bKl6j5EmnmmbQ0h8Sepy3YKh9d1rZnKFsolMFrL8ITjzEzzyKjpE284GNe/5eY25
HR25dY5eYTb0d3QPeH2O5sOrZgOFpTZc8WOo9Kxi0OTjWxFoZstZ1AOM3A2DAoY=
=EtLZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,pci fixes and enhancements
Most changes here are hotplug related:
This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
ACPI: Remove commented-out code from HPET._CRS
hw/pci: switch to a generic hotplug handling for PCIDevice
pci/pcie: convert PCIE hotplug to use hotplug-handler API
pci/shpc: convert SHPC hotplug to use hotplug-handler API
acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
hw/acpi: move typeinfo to the file end
qdev: add "hotpluggable" property to Device
qdev: add to BusState "hotplug-handler" link
define hotplug interface
loader: document that errno is set
pc.c: better error message on initrd sizing failure
pc_piix: enable legacy hotplug for Xen
qtest: don't report signals if qtest driver enabled
hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
pcihp: remove unused AcpiPciHpPciStatus.device_present field
pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR
pcihp: replace enable|disable_device() with oneliners
pcihp: reduce number of device check events
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET
to conflict with the system timer and/or the RTC. It only occurs
on Apple hardware, and even there it is exposed fully only when
OS X is detected (via _OSI). Recent OS X versions work on QEMU
without this statement, so at this time there is no need to find
a better way to conditionally include the statement. This patch
removes the commented out (and wrong, should have been {0, 8})
statement from HPET._CRS.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
xenfv has no fwcfg and so does not load acpi from QEMU.
as such new acpi features don't work.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of packing BiosLinkerLoaderEntry, an unused global variable called
QEMU_PACKED was created (detected by smatch static code analysis).
Including qemu-common.h gets the right definition and also includes some
standard include files which now can be removed here.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Map 2G (q35) of memory below 4G, so the RAM pieces
are nicely aligned to gigabyte borders.
Keep old memory layout for (a) old machine types and (b) in case all
memory fits below 4G and thus we don't have to split RAM into pieces
in the first place. The later makes sure this change doesn't take
away memory from 32bit guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The original SeaBIOS code used the RamSize variable, that was used by
SeaBIOS for the size of RAM below 4GB, not for all RAM. When copied to
QEMU, the code was changed to use the full RAM size, and this broke the
build_srat() code that handles the PCI hole.
Change build_srat() to use ram_size_below_4g instead of ram_size, to
restore the original behavior from SeaBIOS.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ram_below_4g value will be useful in other places, such as the ACPI
table code, and other code that currently requires passing
below_4g_mem_size around in function arguments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use C headers defines as source of IO base/len for respective
values in ASL code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. so OSPM could notice resource conflict if there is any.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... for range defined at hw/acpi/ich9.c:ICH9_PROC_BASE
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. so that they might not be used by PCI devices.
Note:
Resort to concatenating templates with preprocessor help,
because 1.0b spec isn't supporting ConcatenateResTemplate,
as result Windows XP fails to execute PCI0._CRS method if
ConcatenateResTemplate() is used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This enables support for device hotplug behind
pci bridges. Bridge devices themselves need
to be pre-configured on qemu command line.
Design:
- at machine init time, assign "bsel" property to bridges with
hotplug support
- dynamically (At ACPI table read) generate ACPI code to handle
hotplug events for each bridge with "bsel" property
Note: ACPI doesn't support adding or removing bridges by hotplug.
We detect and prevent removal of bridges by hotplug,
unless they were added by hotplug previously
(and so, are not described by ACPI).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
some *.dsl files include another *.dsl files but there weren't
any dependicies and when included file changed target table wasn't
rebuild. Fix this by using the same auto dependency generation
as for C files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Minimize the storage used for AppleSMC's _STA (8bit), relying on ASL
to implicitly convert it to the officially specified 32bit value.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AppleSMC (-device isa-applesmc) is required to boot OS X guests.
OS X expects a SMC node to be present in the ACPI DSDT. This patch
adds a SMC node to the DSDT, and dynamically patches the return value
of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00,
before booting the guest.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for special usb descriptors used by microsoft
windows. They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.
As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSuF+2AAoJECgfDbjSjVRpTz0IAJhNCC8L2GVt+pm1RAt6lbqZ
u9bCrqfThDORN2mUTEuLu4ZpZC0DYc7d0Jjr5NPesC5G/Afzi5/to6+l7nNZneU3
OdBPglXCCfU/cRaLu7JG2akpha0GVU0tsSCoWIYa6mwlWA4/DXVMgeKg/bh/EgfM
B1w4fE2RgRM9bEqWmX4+tZw8dgk7uVJhu95HCDnb5eikaKlFzwuOlvexrDV3KbPc
bkJe35zbGrKOws93tiSeoqcDx2dcYSzecPoJ0jiCY0KXJ17PBWAvuLTtYqkwwe9J
2FEnTslQJ3Rc8jTFiOPWx2pGaejG4y7Tnk6uuzW6fbbSLOQDPJy3KgmutJFMt1A=
=ShCj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Convert 'init' function to QOM's 'realize' for ioapic and kvm-ioapic.
Change variable 'ioapic_no' from static to global. Then we can drop
the 'instance_no' function argument.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some cleanups:
* ioapic_common.c: Rename 'register_types' to 'ioapic_common_register_types'
* Replace inline 'DEVICE(s)' with local 'DeviceState *dev' variable
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Convert 'init' function to QOM's 'realize' for apic, kvm/apic and
xen/xen_apic.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Do some cleanup, including:
1. Remove DO_UPCAST() for APICCommonState
2. Change DeviceState pointers from 'd' to 'dev', better to understand
3. Rename 'register_types' to specifically 'apic_common_register_types'
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make the 32bit pci hole start at end of ram, so all possible address
space is covered.
We used to try and make addresses aligned so they are easier to cover
with MTRRs, but since they are cosmetic on KVM, this is probably not
worth worrying about.
Of course the firmware can use less than that. Leaving space unused is
no problem, mapping pci bars outside the hole causes problems though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix bogus CPU hotplug GPE handler.
Make Q35 CPU hotplug GPE handler match PIIX4 one, since
CPU hotplug event is triggered by GPE0.2 register.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch allows the user to usefully specify
-drive file=img_1,if=pflash,format=raw,readonly \
-drive file=img_2,if=pflash,format=raw
on the command line. The flash images will be mapped under 4G in their
reverse unit order -- that is, with their base addresses progressing
downwards, in increasing unit order.
(The unit number increases with command line order if not explicitly
specified.)
This accommodates the following use case: suppose that OVMF is split in
two parts, a writeable host file for non-volatile variable storage, and a
read-only part for bootstrap and decompressible executable code.
The binary code part would be read-only, centrally managed on the host
system, and passed in as unit 0. The variable store would be writeable,
VM-specific, and passed in as unit 1.
00000000ffe00000-00000000ffe1ffff (prio 0, R-): system.flash1
00000000ffe20000-00000000ffffffff (prio 0, R-): system.flash0
(If the guest tries to write to the flash range that is backed by the
read-only drive, pflash_update() is never called; various flash
programming/erase errors are returned to the guest instead. See the
callers of pflash_update(), and the initialization of "pfl->ro", in
"hw/block/pflash_cfi01.c".)
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Map 3G (i440fx) of memory below 4G, so the RAM pieces
are nicely aligned to gigabyte borders.
Keep old memory layout for (a) old machine types and (b) in case all
memory fits below 4G and thus we don't have to split RAM into pieces
in the first place. The later makes sure this change doesn't take
away memory from 32bit guests.
So, with i440fx and up to 3.5 GB of memory, all of it will be mapped
below 4G. With more than 3.5 GB of memory 3 GB will be mapped below
4G and the remaining amount will be mapped above 4G.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop it when there's no obvious reason why device_add could not work.
Else keep and document why.
* isa-fdc: drop
* i8042: drop, even though its I/O base is hardcoded (because you
could conceivably still add one to a board that has none), and even
though PC board code wires up the A20 line (because that wiring is
optional)
* port92: keep because it needs additional wiring by port92_init()
* mc146818rtc: keep because it needs to be wired up by rtc_init()
* m48t59_isa: keep because needs to be wired up by m48t59_init_isa()
* isa-pit, kvm-pit: keep (in their abstract base pic-common) because
the PIT needs additional wiring by board code, depending on HPET
presence
* pcspk: keep because of pointer property pit, and because realize
sets global pcspk_state
* vmmouse: keep because of pointer property ps2_mouse
* vmport: keep because realize sets global port_state
* isa-i8259, kvm-i8259: keep (in their abstract base pic-common),
because the PICs' IRQ input lines are set up by board code, and the
wiring of the slave to the master is hard-coded in device model code
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
device_add plugs devices into suitable bus. For "real" buses, that
actually connects the device. For sysbus, the connections need to be
made separately, and device_add can't do that. The device would be
left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Owning to some different hardware design, piix and q35 need
different compat. So making them diverge.
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23
can be assigned to hpet as guest chooses. So we introduce intcap
property to do that.
Consider the compat and piix/q35, we finally have the following
value for intcap: For piix, hpet's intcap is hard coded as IRQ2.
For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise
IRQ2, IRQ8, and IRQ16~23 are allowed.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Forward-port the following commit from seabios:
commit 995bbeef78b338370f426bf8d0399038c3fa259c
Author: Paul Menzel <paulepanter@users.sourceforge.net>
Date: Thu Oct 3 11:30:52 2013 +0200
The ASL Optimizing Compiler version 20130823-32 [Sep 11 2013] issues the
following warning.
$ make
[…]
Compiling IASL out/src/fw/acpi-dsdt.hex
out/src/fw/acpi-dsdt.dsl.i 360: Method(IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
[…]
ASL Input: out/src/fw/acpi-dsdt.dsl.i - 475 lines, 19181 bytes, 316 keywords
AML Output: out/src/fw/acpi-dsdt.aml - 4407 bytes, 159 named objects, 157 executable opcodes
Listing File: out/src/fw/acpi-dsdt.lst - 143715 bytes
Hex Dump: out/src/fw/acpi-dsdt.hex - 41661 bytes
Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 246 Optimizations
[…]
After changing the parameter from `NotSerialized` to `Serialized`, the
remark is indeed gone and there is no size change.
The remark was added in ACPICA version 20130517 [1] and gives the
following explanation.
If a thread blocks within the method for any reason, and another thread
enters the method, the method will fail because an attempt will be
made to create the same (named) object twice.
In this case, issue a remark that the method should be marked
serialized. ACPICA BZ 909.
[1] ba84d0fc18
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reported-by: Marcel Apfelbaum <marcel.a@redhat.com>
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IASL stores it's revision in each table header it generates.
That's not nice since guests will see a change each time they move
between hypervisors. We generally fill our own info for tables, but we
(and seabios) forgot to do this for the built-in DSDT.
Modifications in DSDT table:
OEM ID: "BXPC" -> "BOCHS "
OEM Table ID: "BXDSDT" -> "BXPCDSDT"
Compiler ID: "INTL" -> "BXPC"
Compiler Version: 0x20130823 -> 0x00000001
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs,
no version. Best SeaBIOS can do, but we can provide better defaults:
manufacturer QEMU, product & version taken from QEMUMachine desc and
name.
Take care to do this only for new machine types, of course.
Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member
product stable in the future. Use copies instead, and in a way that
makes it obvious that they're guest ABI.
Note that we can be trusted to keep values of member name, because
that has always been ABI.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It doesn't make sense for a region to be INT64_MAX in size:
memory core uses UINT64_MAX as a special value meaning
"all 64 bit" this is what was meant here.
While this should never affect the PC system which at the moment always
has < 63 bit size, this makes us hit all kind of corner case bugs with
sub-pages, so users are probably better off if we just use UINT64_MAX
instead.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With a help of negative memory region priority PCI address space
is mapped underneath RAM regions effectively catching every access
to addresses not mapped by any other region.
It simplifies PCI address space mapping into system address space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Update vgabios, switch from lgplvgabios to seavgabios.
Update build process to build both 128k and 256k bios versions.
Use 256k bios for pc-*-2.0+ machine types.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=nfH6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kraxel/tags/pull-seabios-31b8b4e-1' into staging
Update seabios to master snapshot (pre-1.7.4).
Update vgabios, switch from lgplvgabios to seavgabios.
Update build process to build both 128k and 256k bios versions.
Use 256k bios for pc-*-2.0+ machine types.
# gpg: Signature made Fri 06 Dec 2013 12:01:24 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/tags/pull-seabios-31b8b4e-1:
pc: switch 2.0 machine types to large seabios binary
roms: update vgabios binaries
roms: update seabios binaries
roms: enable seabios cross builds
roms: build two seabios binaries
roms: update seabios submodule to 31b8b4eea9d9ad58a73b22a6060d3ac1c419c26d
add firmware to machine options
add pc-{i440fx,q35}-2.0 machine types
Message-id: 1386322527-23148-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC m68k-softmmu/hw/m68k/mcf5206.o
hw/i386/acpi-build.c: In function ‘build_append_nameseg’:
hw/i386/acpi-build.c:294:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
g_string_vprintf(s, format, args);
^
When this warning is fixed, there is a new compiler warning:
CC i386-softmmu/hw/i386/acpi-build.o
hw/i386/acpi-build.c: In function ‘build_append_notify’:
hw/i386/acpi-build.c:632:5: error:
format not a string literal and no format arguments [-Werror=format-security]
build_append_nameseg(method, name);
^
This is fixed here, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
glib < 2.22 does not have g_array_get_element_size,
limit it's use (to check all elements are 1 byte
in size) to newer glib.
This fixes build on RHEL 5.3.
Reported-by: Richard Henderson <rth@redhat.com>
Reported-by: Erik Rull <erik.rull@rdsoftware.de>
Tested-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131125220039.GA16386@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=c4Hz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-anthony' into staging
Here are a bunch of 1.7-tagged patches that I was afraid
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
# gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
# By Peter Maydell (3) and others
# Via Paolo Bonzini
* bonzini/tags/for-anthony:
qga: Fix compiler warnings (missing format attribute, wrong format strings)
mips jazz: do not raise data bus exception when accessing invalid addresses
target-i386: yield to another VCPU on PAUSE
rng-egd: offset the point when repeatedly read from the buffer
rng-egd: remove redundant free
target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
vfio-pci: Fix multifunction=on
atomic.h: Fix build with clang
pc: get rid of builtin pvpanic for "-M pc-1.5"
configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
sun4m: Add FCode ROM for TCX framebuffer
Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":
(1) a fw_cfg file is removed with this patch. This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.
(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.
The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).
The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.
Thus keep the code simple, and pretend it was never broken.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_array_get_element_size was only added in glib 2.14.
Fortunately we don't use it for any arrays where
element size is > 1, so just add an assert.
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-2-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead. A bit uglier but name size is fixed at 4 bytes here so it's
easy.
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Kiszka (1) and others
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvm: Fix uninitialized cpuid_data
pci-assign: Remove dead code for direct I/O region access from userspace
KVM: x86: fix typo in KVM_GET_XCRS
Message-id: cover.1385040432.git.gleb@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSif5+AAoJECgfDbjSjVRpHNAH/RQO8v2FYOQ7opGhOqzMwXwR
lbsaeaNtHUVV1MHeFtww04Oslp8tdsvcKq4ORGu38sG60dKHSZjdLnrsJCOKeEO/
3Luqx5kAJabSKDPHhYc+sZqQPx2aZT0s16bXuDyWXe+IEPpwO6e39VI7J+ulJjyI
VdDWqumusGtyqFoXri4SS5pcPVowfgKQFhJIkzXfcmzNAT0rXP87CYe1gl9W19rc
aD5VxHXdMvB7wfJAdtGzpc/MuEDG/MgCiUqgiLvC5zM0JUTmdPwgBGl56Er01BZ9
Rudeg8LXi/nhL1rZuQaNK1AnL/jg4mjKByLw5nQjjxPN9Hj0J6Zh4Asu5eYlS3w=
=c2GL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc last minute fixes for 1.8
This has a patch that drops an unused FW CFG entry.
I think it's best to include it before 1.7 to avoid
the need to maintain it in compat machine types.
There's also a doc bugfix by Amos: I'm guessing
doc fixes are still fair game even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Amos Kong (1) and Igor Mammedov (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
doc: fix hardcoded helper path
pc: disable pci-info
Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
$(PYTHON) is a Make variable which is set by configure.
In all other places over the tree, .py files are run from
Makefiles using this variable, except of a single leftover
in hw/i386/Makefile.obj (and a nearby place in there uses
$(PYTHON) correctly). Fix this leftover too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by:: Stefan Weil <sw@weilnetz.de>
The BIOS that we ship in 1.7 does not use pci info
from host and so far isn't going to use it.
Taking in account problems it caused see 9604f70fdf and
to avoid future incompatibility issues, it's safest to
disable that interface by default for all machine types
including 1.7 as it was never exposed/used by guest.
And properly remove/cleanup it during 1.8 development cycle.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using multiple calls to error_report here means every line is
prefaced with the (potentially long) pci-assign command line
arguments.
Use a single error_printf to preserve the intended formatting.
Since this code path is always preceded by an error_report call,
we don't lose the command line reporting.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU will currently crash if started with -no-acpi flag
since acpi build code probes the PM device which isn't present
in this configuration.
To fix, don't expose ACPI tables to guest when acpi has been
disabled from command line.
Fixes LP# 1248854
https://bugs.launchpad.net/qemu/+bug/1248854
Reported-by: chao zhou <chao.zhou@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
This feature was already deprecated back then in qemu-kvm, ie. before
pci-assign went upstream. assigned_dev_ioport_rw will never be invoked
with resource_fd < 0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This fixes strange pvpanic behaviour: you had to
pause to let VM continue (and potentially reboot on panic
if enabled).
This also fixes two bugs reported by Andreas.
One is a long-standing bug exposed by recent pci changes,
the other affects old piix machine types and was caused
by recent acpi changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSd6RWAAoJECgfDbjSjVRpCH0H/1j25vllaM7S5cnW6Ilk81Uz
U/OA93R3p8A+UmZlcWaNPbAb0GvBLreUXz8QIdyTaGH3v714W5xctPR9cGRlSdlH
ZNd02LAvmui9zFYizWFyUjWqorpTHUBQeeAENZN0CmTUYprI0xEMQ8L/WG0zVal+
JjsQElg2+LSg70g9u8oekooGcjhmuMbD/HkaYmKQTni1GBc8ITmkPVuNn/aqWIIF
oERjE5BoTba22773/PHchU3gT7IKEL+gX/q1RJNghP9V3uQH3u1euLWxUgSGh1sz
BnY8Fu3oROssLZAQ82C+DgTOo/OWCtzKV6Ai60wfDNGrjM214rWG8FZjGKwUWxc=
=/YQA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, pvpanic bug fixes
This fixes strange pvpanic behaviour: you had to
pause to let VM continue (and potentially reboot on panic
if enabled).
This also fixes two bugs reported by Andreas.
One is a long-standing bug exposed by recent pci changes,
the other affects old piix machine types and was caused
by recent acpi changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 04 Nov 2013 05:42:46 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and Paolo Bonzini (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vl: allow "cont" from panicked state
exec: limit system memory size
pc: disable acpi info for isapc and old pc machine
Message-id: 1383572851-28326-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Disable acpi build for isapc and no_kvmclock machine
types (used by xen), since acpi build currently expects pci.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike the existing FW_CFG_E820_TABLE entry which carries reservations
only the new etc/e820 file also has entries for RAM.
Format is simliar to the FW_CFG_E820_TABLE, it is a simple list of
e820_entry structs. Unlike FW_CFG_E820_TABLE it has no count though
as the number of entries can be figured from the file size.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
We have a fw_cfg entry to pass e820 entries from qemu to the firmware.
Today it's used to pass reservations only. This patch makes qemu pass
entries for RAM too.
This allows to pass RAM sizes larger than 1TB to the firmware and it
will also allow to pass non-contignous memory ramges should we decide
to implement that some day, say for our virtual numa nodes.
Obviously this needs some extra care to not break existing firware.
SeaBIOS loads the entries and happily adds them without looking at the
type. Which is problematic for memory below 4g as this will overwrite
reservations added for bios memory etc. For memory above 4g it works
just fine, seabios will merge the entry derived from cmos with the one
loaded from fw_cfg.
OVMF doesn't look at the fw_cfg e820 table.
coreboot doesn't look at the fw_cfg e820 table.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
We don't really support CPU throttling, so supply 0 PBLK length.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds C code for generating ACPI tables at runtime,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Although ACPI tables come from a system BIOS on real hw,
it makes sense that the ACPI tables are coupled with the
virtual machine, since they have to abstract the x86 machine to
the OS's.
This is widely desired as a way to avoid the churn
and proliferation of QEMU-specific interfaces
associated with ACPI tables in bios code.
Notes:
As BIOS can reprogram devices prior to loading
ACPI tables, we pre-format ACPI tables but defer loading
hardware configuration there until tables are loaded.
The code structure was intentionally kept as close
to the seabios original as possible, to simplify
comparison and making sure we didn't lose anything
in translation.
Minor code duplication results, to help ensure there are no functional
regressions, I think it's better to merge it like this and do more code
changes in follow-up patches.
Cross-version compatibility concerns have been addressed:
ACPI tables are exposed to guest as FW_CFG entries.
When running with -M 1.5 and older, this patch disables ACPI
table generation, and doesn't expose ACPI
tables to guest.
As table content is likely to change over time,
the following measures are taken to simplify
cross-version migration:
- All tables besides the RSDP are packed in a single FW CFG entry.
This entry size is currently 23K. We round it up to 64K
to avoid too much churn there.
- Tables are placed in special ROM blob (not mapped into guest memory)
which is automatically migrated together with the guest, same
as BIOS code.
- Offsets where hardware configuration is loaded in ACPI tables
are also migrated, this is in case future ACPI changes make us
rearrange the tables in memory.
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Dave Frodin <dave.frodin@se-eng.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Magnus Christensson <magnus.christensson@intel.com>
Acked-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This defines a structure that will be used to fill in acpi tables
where relevant properties are not yet available using QOM.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a dynamic bios linker/loader.
This will be used by acpi table generation
code to:
- load each table in the appropriate memory segment
- link tables to each other
- fix up checksums after said linking
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
update generated file, not sure what changed
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add pre-compiled ASL files. Useful for systems that
do not have IASL.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.
Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds ASL code as well as scripts for processing it,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Will be used for runtime acpi table generation.
Note:
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Dave Frodin <dave.frodin@se-eng.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Magnus Christensson <magnus.christensson@intel.com>
Acked-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rom_state_paddr is guest provided (caller address of outw(VAPIC_PORT) +
writen 16-bit value) and can be influenced to point beyond the end of
the host memory backing the guest's RAM. Make sure we do not use this
pointer to actually read beyond the limits.
Reading arbitrary guest bytes is harmless, the guest kernel has to
manage access to this I/O port anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSR83kAAoJECgfDbjSjVRpX08H/jKgYBNJaChev1TROIVHEGbu
IzvkjfocvKO+6wmhOf5x+xwFmzrijUMa1CPvOkCp8c2A3Iek7rmnedknlhXYh7dM
z5mXcvFGjnu7ST38ydF/Emk9+Z6rRg5Y/hkmlDyr+9lNcoiCDLXXcUrKjeIHNoWl
e8w3yiPCJ528QyrLwQ890XetJphv67pMlsjMgLQ2betMk++Ac/ctUf1D2p1X4NeQ
Q2drbo5Z4yDk0i6QMA3iLq1Bh/AhE10bCDq9rCzfZGIKVyncL6ne2pSi/xDvpLrF
dmxoiJ5QrK6xLnagCcn5T6SB9DkwbEPdL7qCqlxZ8USr7cVyPdzYtHtGSBWdeXY=
=xF01
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
smbios: Factor out smbios_maybe_add_str()
smbios: Make multiple -smbios type= accumulate sanely
smbios: Improve diagnostics for conflicting entries
smbios: Convert to QemuOpts
smbios: Normalize smbios_entry_add()'s error handling to exit(1)
virtio-net: fix up HMP NIC info string on reset
pci: remove explicit check to 64K ioport size
piix4: disable io on reset
piix: use 64 bit window programmed by guest
q35: use 64 bit window programmed by guest
pci: add helper to retrieve the 64-bit range
range: add min/max operations on ranges
range: add Range to typedefs
q35: make pci window address/size match guest cfg
Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME. If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).
Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME). The others are ignored.
"First one wins, subsequent ones get ignored silently" isn't nice. We
commonly let the last option win. Useful, because it lets you
-readconfig first, then selectively override with command line
options.
Clean up -smbios to work the common way. Accumulate the settings,
with later ones overwriting earlier ones. Put the result into fw_cfg
(no more useless duplicates).
Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We allow either tables or fields for the same type. Makes sense,
because SeaBIOS uses fields only when no tables are present.
We do this by searching the SMBIOS blob for a previously added table
or field. Error messages look like this:
qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field
User needs to know that "table" is defined by -smbios file=..., and
"field" by -smbios type=...
Instead of searching the blob, record additions of interest, and check
that. Simpler, and makes better error messages possible:
qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type
qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So that it can be set in config file for -readconfig.
This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...
MST: drop one chunk to fix build errors
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It exits on all error conditions but one, where it returns -1.
Normalize, and return void.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
Report from clang analyzer:
clock.c:42:15: warning:
Value stored to 'cpu' during its initialization is never read
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To avoid misinterpreting INACTIVE after migration as old qemu-kvm's
STANDBY, also clear rom_state_paddr when going back to this state.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ROM layout may change after reset of devices are hotplugged, so we have
to pick up the physical address again when the ROM is initialized. This
is best achieved by resetting the state to INACTIVE.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If not caught early, a zero-length ROM will cause a NULL-pointer access
later on in patch_hypercalls when allocating a zero-length ROM copy and
trying to read from it.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Anthony PERARD
# Via Stefano Stabellini
* sstabellini/xen-2013-09-09:
pc_q35: Initialize Xen.
pc: Initializing ram_memory under Xen.
Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: qemu-stable@nongnu.org
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).
RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.
The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.
qemu-system-x86_64 -device e1000,mitigation=on,... ...
For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=/bSY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Use #defines instead of magic numbers for CPUID cache info
cpu: Replace qemu_for_each_cpu()
cpu: Use QTAILQ for CPU list
a15mpcore: Use qemu_get_cpu() for generic timers
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
We have a lot of code duplication between machine types,
this increases with each new machine type
and each new field.
This has already introduced a minor bug: description
for pc-1.3 says "Standard PC" while description for
pc-1.4 is "Standard PC (i440FX + PIIX, 1996)"
which makes you think 1.3 is somehow more standard,
or newer, while in fact it's a revision of the same PC.
This patch addresses this issue by using macros, along
the lines used by PC_COMPAT_X_X - only for
non-property options.
The approach can extend to non-PC machine types.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSGvbsAAoJECgfDbjSjVRp0qsH/2N/b/5bNhL6gx5Kjigzv7Lt
bmCUsSsUm/Rnhke2SpDPVdIOU9W5WIX2zte8qiXuBJi3j/RS9procbgUZrCetpUI
GHQOn+n8e2TX/P9CIcHaN/bA1b+Kx+bvaVbDL/6P2PJvodbDGwDLp/9y+Tisv5Ye
kLow8Y4ZJcaTlmPf/Mh1AnhNa3gel231A3qwugVUNDSyITM6pG/0M07xk8YBj+JJ
6DYrlK0bKMNDxPu5St+YP94D1ODv2zM1aio/TdMUaNfqTZM1iqGTj3zKkBS2PjT0
RhuU2x4N91lY/uCdudtWSj5dYtfRT/xw7qwNAz9IHNz6RlGeX0n++ClMC8z9Y8A=
=Pc09
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into stable-1.5
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 26 Aug 2013 01:34:20 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Markus Armbruster (5) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table
pc_piix: Kill pc_init1() memory region args
pc: pc_compat_1_4() now can call pc_compat_1_5()
pc: Create pc_compat_*() functions
pc: Kill pc_init_pci_1_0()
pc: Don't explode QEMUMachineInitArgs into local variables needlessly
pc: Don't prematurely explode QEMUMachineInitArgs
ppc: Don't duplicate QEMUMachineInitArgs in PPCE500Params
ppc: Don't explode QEMUMachineInitArgs into local variables needlessly
sun4: Don't prematurely explode QEMUMachineInitArgs
q35: Add PCIe switch to example q35 configuration
loader: store FW CFG ROM files in RAM
arch_init: align MR size to target page size
pc: cleanup 1.4 compat support
Message-id: 1377535318-30491-1-git-send-email-mst@redhat.com
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
get_real_device() has 5 parameters with the last 4 is contained in the first
structure.
This patch removes the last 4 parameters and directly use them from the first
parameter.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers always use the same values (get_system_memory(),
get_system_io()), so the parameters are pointless.
If one day we decide to eliminate get_system_memory() and
get_system_io(), we will be able to do that more easily by adding the
values to struct QEMUMachineInitArgs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It just needs to set has_pvpanic=false after calling it. This way, it
won't be a special case anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Making the older compat functions call the newer compat functions at the
beginning allows the older functions undo what's done by newer compat
functions. e.g.: pc_compat_1_4() will be able to call pc_compat_1_5()
and then set has_pvpanic=false.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pc_init_pci_1_2()/pc_init_pci_1_0() split was made on commit
6fd028f64f, in preparation for commit
9953f8822c. The latter was reverted, so there's
no reason to keep two separate functions that do exactly the same, anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode when the variable is used just a few times, and never
changed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode QEMUMachineInitArgs before passing it to pc_init1().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but
they are not backed by RAM so they don't get migrated.
Each time we change two bytes in such a ROM this breaks cross-version
migration: since we can migrate after BIOS has read the first byte but
before it has read the second one, getting an inconsistent state.
Future-proof this by creating, for each such ROM,
an MR serving as the backing store.
This MR is never mapped into guest memory, but it's registered
as RAM so it's migrated with the guest.
Naturally, this only helps for -M 1.7 and up, older machine types
will still have the cross-version migration bug.
Luckily the race window for the problem to trigger is very small,
which is also likely why we didn't notice the cross-version
migration bug in testing yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make 1.4 compat code call the 1.6 one, reducing
code duplication. Add comment explaining why we can't
make 1.4 call 1.5 as usual.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Context matching caused the 'has_pvpanic = true' to be applied to
the 1.6 machine type instead of the 1.5 machine type.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is based on Hu Tao's:
http://lists.nongnu.org/archive/html/qemu-devel/2013-08/msg00124.html
No need to hard-code pvpanic as part of the machine.
It can be added with "-device pvpanic" from command line (The next patch).
Anyway, for backport compatibility it is still part of 1.5
machine.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Message-id: 1376233843-19410-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 41cb383f42 made a guest-visible
change by adding the PCLMULQDQ bit to Westmere without adding
compatibility code to keep the ABI for older machine-types.
Fix it by adding the missing compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com
Rebased.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the new semantics of pc_sysfw (no -pflash implies "old-style" ROM setup,
-pflash implies "new-style" ROM setup), there is no need anymore for a compat
property. Old machines simply will never use -pflash, and thus will always
use old-style setup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1376069702-22330-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The BIOS that we ship in 1.6 does not use pci info
from host (yet). Several issues turned up
(e.g. around winXP boot crashes). So it's safest to disable that
interface for 1.6 machine types for now, leave it on for 1.7
as we have enough time to fix issues if any.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Error **errp argument is not for emitting warnings, it means an error
has occurred and the caller should not make any assumptions about the
state of other return values (unless otherwise documented).
Therefore cpu_x86_create() must unref the new X86CPU itself, and
pc_new_cpu() must check for an Error rather than NULL return value.
While at it, clean up a superfluous NULL check.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.
Examples:
-global i440FX-pcihost.pci-hole64-size=4G
-global q35-pcihost.pci-hole64-size=4G
Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-5-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-2-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and avoid FROM_SYSBUS().
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
And remove variables if possible.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Converted remaining access and renamed to parent_obj]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
=P+pr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit f8c457b88d
"pc: pass PCI hole ranges to Guests"
broke Xen as it has no fw_cfg.
Check for this configuration and boil out.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root. As we add support for
multiple PCI roots, that may no longer be the case. This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters. NICs created new-style, with
-device can of course be put anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_root_bus() takes a domain parameter. Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus. Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Paolo Bonzini (50) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony: (66 commits)
exec: change some APIs to take AddressSpaceDispatch
exec: remove cur_map
exec: put memory map in AddressSpaceDispatch
exec: separate current radix tree from the one being built
exec: move listener from AddressSpaceDispatch to AddressSpace
memory: move MemoryListener declaration earlier
exec: separate current memory map from the one being built
exec: change well-known physical sections to macros
qom: Use atomics for object refcounting
memory: add reference counting to FlatView
memory: use a new FlatView pointer on every topology update
memory: access FlatView from a local variable
add a header file for atomic operations
hw/[u-x]*: pass owner to memory_region_init* functions
hw/t*: pass owner to memory_region_init* functions
hw/s*: pass owner to memory_region_init* functions
hw/p*: pass owner to memory_region_init* functions
hw/n*: pass owner to memory_region_init* functions
hw/m*: pass owner to memory_region_init* functions
hw/i*: pass owner to memory_region_init* functions
...
Message-id: 1372950842-32422-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure 1.4 calls 1.5, 1.3 calls 1.4 etc.
This way it's enough to add enough new compat hook
in a single place in piix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest currently has to jump through lots of hoops to guess the PCI hole
ranges. It's fragile, and makes us change BIOS each time we add a new
chipset. Let's report the window in a ROM file, to make BIOS do exactly
what QEMU intends.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
kvmclock should not count while vm is paused, because:
1) if the vm is paused for long periods, timekeeping
math can overflow while converting the (large) clocksource
delta to nanoseconds.
2) Users rely on CLOCK_MONOTONIC to count run time, that is,
time which OS has been in a runnable state (see CLOCK_BOOTTIME).
Change kvmclock driver so as to save clock value when vm transitions
from runnable to stopped state, and to restore clock value from stopped
to runnable transition.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While DEBUG() already includes the function name.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current logic updates KVM's view of our interrupt map every time we
change it. While this is nice and bullet proof, it slows things down
badly for me. QEMU spends about 3 seconds on every start telling KVM what
news it has on its routing maps.
Instead, let's just synchronize the whole irq routing map as a whole when
we're done constructing it. For things that change during runtime, we can
still update the routing table on demand.
Signed-off-by: Alexander Graf <agraf@suse.de>
The upper_mem field of the Multiboot information struct doesn't really
contain the RAM size - 1 MB like we used to calculate it, but only the
memory from 1 MB up to the first (upper) memory hole.
In order to correctly retrieve this information, the multiboot ROM now
looks at the mmap it creates anyway and tries to find the size of
contiguous usable memory from 1 MB.
Drop the multiboot.c definition of lower_mem and upper_mem because both
are queried at runtime now.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1372018066-21822-3-git-send-email-mail@kevin-wolf.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Creation of the xen-platform device is currently hardcoded into machine
type pc's initialization code, guarded by a test for the whether the xen
accelerator is enabled. This patch moves the creation of xen-platform into
the initialization code of the xenfv machine type. This maintains backwards
compatibility for that machine type but allows more flexibility if another
machine type is used with Xen HVM domains.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Xen HVM domains normally spawn QEMU with a dedicated xenfv machine type. The
initialization code for this machine type can easily be pulled into the
generic pc initialization code and guarded with a test for whether the xen
accelerator options is specified, which is more consistent with the way
other accelerators are used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit 9f24a8030a.
The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
# By Andreas Färber (3) and others
# Via Gerd Hoffmann
* kraxel/usb.84:
usb: fix serial number for hid devices
usb: add serial bus property
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
usb/host-libusb: Fix building with libusb git master code
usb/hcd-ehci: Add Faraday FUSBH200 support
usb/hcd-ehci: Replace PORTSC macros with variables
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
usb/hcd-ehci: Split off instance_init from realize
usb/hcd-ehci-sysbus: Convert to QOM realize
commit 7b074a22da changed the serial
number of hid devices. Add compat properties to keep the old serial
number for qemu 0.12 and older.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Option -no-fd-bootchk asks the BIOS to attempt booting from a floppy
even when the boot sector signature isn't there, by setting a bit in
RTC CMOS. It was added back in 2006 (commit 52ca8d6a).
Two years later, commit 0ecdffbb added monitor command boot_set.
Implemented by new function pc_boot_set(). It unconditionally clears
the floppy signature bit in CMOS.
Commit e0f084bf added -boot option once to automatically change the
boot order on first reset. Reuses pc_boot_set(), thus also clears the
floppy signature bit. Commit d9346e81 took care to preserve this
behavior.
Thus, -no-fd-bootchk applies to any number of boots. Except it
applies just to the first boot with -boot once, and never after
boot_set. Weird. Make it stick instead: set the bit according to
-no-fd-bootchk in pc_boot_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
Classic endianness bug due to careless dirty coding: assuming reading
a byte from an int variable gets the least significant byte.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Having size precede the associated pointer is odd. Swap them, and fix
up the types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improves diagnistics from ad hoc messages like
Invalid SMBIOS UUID string
to
qemu-system-x86_64: -smbios type=1,uuid=gaga: Invalid UUID
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo "ever the optimist" Ersek <lersek@redhat.com>
Message-id: 1370610036-10577-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The CPUID model values on Conroe, Penryn, and Nehalem are too
conservative and don't reflect the values found on real Conroe, Penryn,
and Nehalem CPUs.
This causes at least one known problems: Windows XP disables sysenter
when (family == 6 && model <= 2), but Skype tries to use the sysenter
instruction anyway because it is reported as available on CPUID, making
it crash.
This patch sets appropriate model values that correspond to real Conroe,
Penryn, and Nehalem CPUs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some CPU model fixes are going to be included and they will require
compatibility properties in the pc-*-1.5 machine-types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QMP command "{ 'execute': 'cpu-add', 'arguments': { 'id': -1 }}" may cause
QEMU SIGSEGV at:
piix4_cpu_hotplug_req ()
...
g->sts[cpu_id / 8] |= (1 << (cpu_id % 8));
...
Since for PC in current implementation id should be in range [0...maxcpus)
and maxcpus is already checked, add check for lower bound and error out
on incorrect value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of having the parent provide PICCommonClass::init,
let the children override DeviceClass::realize themselves.
This pushes the responsibility of saving and calling the parent's
realizefn to the children.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of having the parent provide PITCommonClass::init,
let the children override DeviceClass::realize themselves.
This pushes the responsibility for saving and calling the parent's
realizefn to the children.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* sstabellini/xen_fixes_20130603:
xen: use pc_init_pci instead of pc_init_pci_no_kvmclock
xen: remove xen_vcpu_init
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
xen_machine_pv: do not create a dummy CPU in machine->init
main_loop: do not set nonblocking if xen_enabled()
xen: simplify xen_enabled
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Call kvmclock_create only if kvmclock_enabled.
Use pc_init_pci on Xen rather than pc_init_pci_no_kvmclock.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
No need for xen_vcpu_init anymore:
- the RTC emulator doesn't have any periodic timers continuously running
even in absence of guest interactions anymore;
- qemu_dummy_start_vcpu takes care of disabling TCG for us, so we don't
need to do it manually here.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END,
that is 0xf0000000.
Start the PCI hole at 0xe0000000 instead, that is the same value used by
pc_init1 and qemu-xen-traditional.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: qemu-stable@nongnu.org
This fixes a regression introduced by:
commit 62fc403f11
Author: Igor Mammedov <imammedo@redhat.com>
Date: Mon Apr 29 18:54:13 2013 +0200
target-i386: Attach ICC bus to CPU on its creation
X86CPU should have parent bus so it could provide bus for child APIC.
The commit makes it mandatory to pass a valid ICC bus to cpu_x86_create,
but cpu_x86_init just passes NULL to it.
xen_machine_pv uses cpu_x86_init, therefore it has been broken.
This patch fixes the problem by removing the dummy CPU creation
altogether from xen_init_pv, relying on the fact that QEMU can now cope
with a machine without an emulated CPU.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
CC: imammedo@redhat.com
CC: qemu-stable@nongnu.org
Currently some places use pointer-to-void even though they mean
pointer-to-FWCfgState. Clean them up.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support guest MSI affinity changes update the MSI message any time
the guest writes to the address or data fields.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130513201840.5430.86331.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Eduardo Habkost (6) and others
# Via Andreas Färber
* afaerber/qom-cpu:
target-i386: n270 can MOVBE
target-i386: Introduce generic CPUID feature compat function
target-i386: Change CPUID model of 486 to 8
target-i386: Emulate X86CPU subclasses for global properties
qdev: Introduce qdev_prop_set_globals_for_type()
qdev: Let qdev_prop_parse() pass through Error
target-i386: Add "filtered-features" property to X86CPU
target-i386: Introduce X86CPU::filtered_features field
target-i386: Add "feature-words" property to X86CPU
target-i386: Use FeatureWord loop on filter_features_for_kvm()
target-i386: Add ECX information to FeatureWordInfo
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is
needed when booting 3.8 and later linux kernels built with the MATOM
target because we require MOVBE in order to boot properly now.
Signed-off-by: Borislav Petkov <bp@suse.de>
[ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This replaces the feature-bit fields on both X86CPU and x86_def_t
structs with an array.
With this, we will be able to simplify code that simply does the same
operation on all feature words (e.g. kvm_check_features_against_host(),
filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit
property lookup/registration, and the proposed "feature-words" property)
The following field replacements were made on X86CPU and x86_def_t:
(cpuid_)features -> features[FEAT_1_EDX]
(cpuid_)ext_features -> features[FEAT_1_ECX]
(cpuid_)ext2_features -> features[FEAT_8000_0001_EDX]
(cpuid_)ext3_features -> features[FEAT_8000_0001_ECX]
(cpuid_)ext4_features -> features[FEAT_C000_0001_EDX]
(cpuid_)kvm_features -> features[FEAT_KVM]
(cpuid_)svm_features -> features[FEAT_SVM]
(cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It allows APIC to be hotplugged.
* map APIC's mmio at board level if it is present
* do not register mmio region for each APIC, since
only one is used/mapped
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
X86CPU should have parent bus so it could provide bus for child APIC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Provides a hotpluggable bus for APIC and CPU.
* icc-bridge will serve as a parent for icc-bus and provide
mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
and IOAPIC devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Allows kvmvapic to compile if sysbus.h is removed from apic_internal.h,
from which it is indirectly included.
sysbus.h will be removed from apic_internal.h after converting
APICs to ICCDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Put APIC_SPACE_SIZE in a public header so that it can be
reused elsewhere later.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The property is used from board level to set APIC ID for CPUs it
creates. Do so in a new pc_new_cpu() helper, to be reused for hot-plug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It provides updated currently available CPUs count to BIOS on reboot.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduced when applying commit f81222b (audio: look for the ISA and
PCI buses, 2013-04-18).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1367330432-14417-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-12-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eliminate DO_UPCAST() for PICCommonState. Prepares for ISA realizefn.
Also give the i8259_common type registration functions unique names
while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-6-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Reuse type constant for PC machine compatibility settings.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-4-git-send-email-afaerber@suse.de
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use of a flash memory device for the BIOS was added in series "[PATCH
v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1.
Flash vs. ROM is a guest-visible difference. Thus, flash use had to
be suppressed for machine types pc-1.0 and older. This was
accomplished by adding a dummy device "pc-sysfw" with property
"rom_only":
* Non-zero rom_only means "use ROM". Default for pc-1.0 and older.
* Zero rom_only means "maybe use flash". Default for newer machines.
Not only is the dummy device ugly, it was also retroactively added to
the older machine types! Fortunately, it's not guest-visible (thus no
immediate guest ABI breakage), and has no vmstate (thus no immediate
migration breakage). Breakage occurs only if the user unwisely
enables flash by setting rom_only to zero. Patch review FAIL #1.
Why "maybe use flash"? Flash didn't (and still doesn't) work with
KVM. Therefore, rom_only=0 really means "use flash, except when KVM
is enabled, use ROM". This is a Bad Idea, because it makes enabling/
disabling KVM guest-visible. Patch review FAIL #2.
Aside: it also precludes migrating between KVM on and off, but that's
not possible for other reasons anyway.
Fix as follows:
1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts,
or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything
for older machines (to remain bug-compatible).
2. Change the default value from 0 to 1 for these machines.
Necessary, because 0 doesn't work with KVM. Once it does, we can flip
the default back to 0.
3. Don't revert the retroactive addition of device "pc-sysfw" to older
machine types. Seems not worth the trouble.
4. Add a TODO comment asking for device "pc-sysfw" to be dropped once
flash works with KVM.
Net effect is that you get a BIOS ROM again even when KVM is disabled,
just like for machines predating the introduction of flash.
To get flash instead, use "--global pc-sysfw.rom_only=0".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the next commit easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the commit after next easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
... and define type name and type cast macro for kvmvapic according
to accepted convention.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Functions defined in acpi/ should be declared in
acpi.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A common dependency of the constant's current users:
- hw/apic_common.c
- hw/i386/kvmvapic.c
- target-i386/cpu.c
is "target-i386/cpu.h".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-9-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As one consequence, strtok() -- which modifies its argument -- is replaced
with g_strsplit().
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-6-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a test device which supports the kvmctl ioports,
so one can run the KVM unittest suite.
Intended Usage:
qemu-system-x86_64 -nographic \
-device pc-testdev \
-device isa-debug-exit,iobase=0xf4,iosize=0x04 \
-kernel /path/to/kvm/unittests/msr.flat
Where msr.flat is one of the KVM unittests, present on a
separate repo,
git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
[ kraxel: more memory api + qom fixes ]
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When present it makes qemu exit on any write.
Mapped to port 0x501 by default.
Without this patch Anthony doesn't allow me to
remove the bochs bios debug ports because his
test suite uses this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pc q35 based chipset emulator to support pci express natively. Based on
Anthony Liguori's suggestion, the machine name is 'q35-next', with an alias
of 'q35'. At this point, there are no compatibility guarantees. When the
chipset stabilizes more, we will begin to version the machine names.
Major features which still need to be added:
-Migration support (mostly around ahci)
-ACPI hotplug support (pcie hotplug support is working)
-Passthrough support
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for the ICH9 LPC chip.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A more complete history can be found here:
git://xenbits.xensource.com/qemu-xen-unstable.git
Signed-off-by: Jiang Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
A more complete history can be found here:
git://xenbits.xensource.com/qemu-xen-unstable.git
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: Guy Zana <guy@neocleus.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
