The write_console_data() method in sclpconsole-lm.c checks
whether the return value of qemu_chr_fe_write() has the
value of -EAGAIN and if so then increments the buffer offset
by the value of EAGAIN. Fortunately qemu_chr_fe_write() will
never return EAGAIN directly, rather it returns -1 with
errno set to EAGAIN, so this broken code path was not
reachable. The behaviour on EAGAIN was stil bad though,
causing the write_console_data() to busy_wait repeatedly
calling qemu_chr_fe_write() with no sleep between iters.
Just remove all this loop logic and replace with a call
to qemu_chr_fe_write_all().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The continue_send() method in ipmi_bmc_extern.c directly
assigns the return value of qemu_chr_fe_write() to the
variable tracking the I/O buffer offset. This ignores the
possibility that the return value could be -1 and so will
cause I/O go backwards on EAGAIN. Fortunately 'outpos' is
unsigned, so can't go negative - it will become MAX_INT
which will cause the loop to stop, and avoid an accidental
out of bounds array access.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In PVSCSI paravirtual SCSI bus, pvscsi_convert_sglist can take a very
long time or go into an infinite loop due to two different bugs:
1) the request descriptor data length is defined to be 64 bit. While
building SG list from a request descriptor, it gets truncated to 32bit
in routine 'pvscsi_convert_sglist'. This could lead to an infinite loop
situation large 'dataLen' values when data_length is cast to uint32_t and
chunk_size becomes always zero. Fix this by removing the incorrect cast.
2) pvscsi_get_next_sg_elem can be called arbitrarily many times if the
element has a zero length. Get out of the loop early when this happens,
by introducing an upper limit on the number of SG list elements.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473108643-12983-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These issues cause respectively a QEMU crash and a leak of 2 bytes of
stack. They were discovered by VictorV of 360 Marvel Team.
Reported-by: Tom Victor <i-tangtianwen@360.cm>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When LSI SAS1068 Host Bus emulator builds configuration page
headers, mptsas_config_pack() should assert that the size
fits in a byte. However, the size is expressed in 32-bit
units, so up to 1020 bytes fit. The assertion was only
allowing replies up to 252 bytes, so fix it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472645167-30765-2-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the page count for these rings to
an arbitrary value, leading to infinite loop or OOB access.
Add check to avoid it.
Reported-by: Tom Victor <vv474172261@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472626169-12989-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Openstack Cinder assigns volume a 36 characters uuid as serial.
QEMU will shrinks the uuid to 20 characters, which does not match
the original uuid.
Note that there is no limit to the length of the serial number in
the SCSI spec. 20 was copy-pasted from virtio-blk which in turn was
copy-pasted from ATA; 36 is even more arbitrary. However, bumping it
up too much might cause issues (e.g. 252 seems to make sense because
then the maximum amount of returned data is 256; but who knows there's
no off-by-one somewhere for such a nicely rounded number).
Signed-off-by: Rony Weng <ronyweng@synology.com>
Message-Id: <1472457138-23386-1-git-send-email-ronyweng@synology.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can't hotplug display adapters in qemu, tag virtio-gpu-pci
accordingly (virtio-vga already has this).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1473319037-27645-1-git-send-email-kraxel@redhat.com
When processing svga command DEFINE_CURSOR in vmsvga_fifo_run,
the computed BITMAP and PIXMAP size are checked against the
'cursor.mask[]' and 'cursor.image[]' array sizes in bytes.
Correct these checks to avoid OOB memory access.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1473338754-15430-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
!legacy && !modern is shorter than !(legacy || modern).
I also perfer this (less ()s) as a matter of taste.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set vring call fd unconditionally even if guest driver does
not use MSIX for this vritqueue at all. This will cause lots of
unnecessary userspace access and other checks for drivers does not use
interrupt at all (e.g virtio-net pmd). So check and clean vring call
fd if guest does not use any vector for this virtqueue at
all.
Perf diffs (on rx) shows lots of cpus wasted on vhost_signal() were saved:
#
28.12% -27.82% [vhost] [k] vhost_signal
14.44% -1.69% [kernel.vmlinux] [k] copy_user_generic_string
7.05% +1.53% [kernel.vmlinux] [k] __free_page_frag
6.51% +5.53% [vhost] [k] vhost_get_vq_desc
...
Pktgen tests shows 15.8% improvement on rx pps and 6.5% on tx pps.
Before: RX 2.08Mpps TX 1.35Mpps
After: RX 2.41Mpps TX 1.44Mpps
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without presuming if we got there because of a user mistake or some
more subtle bug in the tooling, it really does not make sense to
implement a non-functional device.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statistics virtqueue is not migrated properly because virtio-balloon
does not include s->stats_vq_elem in the migration stream.
After migration the statistics virtqueue hangs because the host never
completes the last element (s->stats_vq_elem is NULL on the destination
QEMU). Therefore the guest never submits new elements and the virtqueue
is hung.
Instead of changing the migration stream format in an incompatible way,
detect the migration case and rewind the virtqueue so the last element
can be completed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The one pending element is being freed but not discarded on device
reset, which causes svq->inuse to creep up, eventually hitting the
"Virtqueue size exceeded" error.
Properly discarding the element on device reset makes sure that its
buffers are unmapped and the inuse counter stays balanced.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will used by the next patch.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
event_notifier_init() can fail in real life, for example when there
are not enough open file handles available (EMFILE) when using a lot
of devices. So instead of leaving the average user with a cryptic
error number only, print out a proper error message with strerror()
instead, so that the user has a better way to figure out what is
going on and that using "ulimit -n" might help here for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplify a bit the code by using g_strdup_printf() and store it in a
non-const value so casting is no longer needed, and ownership is
clearer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Free the timer allocated in instance_init.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Further cleanup would need to call qemu_free_irq() at the appropriate
time, but for now this silences ASAN about direct leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The free_ranges array is used as a temporary pointer array, the segment
should still be freed, however, it shouldn't free the elements themself.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
qemu_irq is already a pointer, no need to have an extra pointer level.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
-----BEGIN PGP SIGNATURE-----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=T1rz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160907' into staging
ppc patch queue for 2016-Sep-7
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
# gpg: Signature made Wed 07 Sep 2016 07:09:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160907: (64 commits)
tests: Check serial output of firmware boot of some machines
tests: Resort check-qtest entries in Makefile.include
spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_call
ppc: Improve a few more helper flags
ppc: Improve the exception helpers flags
ppc: Improve flags for helpers loading/writing the time facilities
ppc: Don't generate dead code on unconditional branches
ppc: Stop dumping state on all exceptions in linux-user
ppc: Fix catching some segfaults in user mode
ppc: Fix macio ESCC legacy mapping
hw/ppc: add a ppc_create_page_sizes_prop() helper routine
hw/ppc: use error_report instead of fprintf
ppc: Rename #include'd .c files to .inc.c
target-ppc: add extswsli[.] instruction
target-ppc: add vsrv instruction
target-ppc: add vslv instruction
target-ppc: add vcmpnez[b,h,w][.] instructions
target-ppc: add vabsdu[b,h,w] instructions
target-ppc: add dtstsfi[q] instructions
target-ppc: implement branch-less divd[o][.]
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kernel v4.0, linux uses H_CHANGE_LOGICAL_LAN_MAC to change lively
the MAC address of an ibmveth interface.
As QEMU doesn't implement this h_call, we can't change anymore the
MAC address of an spapr-vlan interface.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current mapping, while correct for the base ports (which is all the
driver uses these days), is wrong for the extended registers.
I suspect the bugs come from incorrect tables in the CHRP IO Ref document,
I have verified the new values here match Apple's MacTech.pdf.
Note: Nothing that I know of actually uses these registers so it's not a
huge deal, but this patch has the added advantage of adding comments to
document what the registers are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We abort a few lines above if kernel_xics_fd == -1.
This is only code cleanup.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Correct bad name of the vmstate structure. Since this breaks
compatibility also update vmstate version back to 0 and make
all fields independent of the VMState version.
Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1473146346-27337-1-git-send-email-marcin.krzeminski@nokia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current QEMU will stall guest VM booting under ACPI mode when vcpu count
is >= 12. Analyzing the booting log, it turns out that DSDT table can't
be loaded correctly due to "Invalid character(s) in name (0x62303043),
repaired: [C00*]". This is because existing QEMU uses a lower case AML
ID for CPU devices (e.g. C000, C001, ..., C00a, C00b). The ACPI code
inside guest VM detects this lower case character as an invalid character
(see acpi_ut_valid_acpi_char() in drivers/acpi/acpica/utstring.c file)
and converts it to "*". This causes duplicated IDs (i.e. "C00a" ==>"C00*"
and "C00b" ==> "C00*"). So ACPI refuses to load the table.
This patch fixes the problem by changing the format with a upper case
character. It matches the CPU ID formats used in other parts of QEMU
code.
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1472852809-23042-1-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The uboot in the previous release of the SDK was using a hardcoded
value for memory size. This is not true anymore, the value is now
retrieved from the memory controller.
Below is a model for this device, only supporting unlock and
configuration. Without it, we endup running a guest with 64MB, which
is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to
build a default value. Some bits should be linked to SCU strapping
registers but it seems a bit complex to add for the current need.
The model is ready for the AST2500 SOC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJXzpyJAAoJEH8JsnLIjy/WwToQAJ29bQ8dbVxybQtApZn0l3DH
aBcguj822Vqa+KaxOLAfzkxmG5MurIvWzRQD1BvjxaprRykB+hDh4oAJCmVjfedP
B28h24TUF+w8WIbpxf9weQFNpsT2Ire8ZySc0JZhpYMqxXCqy6NzDs98sjedDC0O
jNbfic1L+yEpZumVE0Fzr4/YgPumt7wP0X42nb6G8R+VlChm3nweNCFF7hNQvTuB
GNNbd9ckUS0BTcQazm04yRR/WzXW6uFqa00QeWsNGGd1mmZ0kUxiqxVgx/fuBMrL
yC4LxFit7eNRoeVqu/nu8GsG+2Ol5zsalfJKFcoWmpg8pygOayc5SXecRUZRw7tg
3oB7ZijbrBUFlr4y6cNVCGPtRluQshpLGHlgo68ulEIlHprqECwgPIdoOPr0bs+v
Gb8ho2Y+lrISPIsjYWK5UFSmZf0SIBGILZUSD3lzQ+oOHXGKbdPAaFvSUqXENHSN
xjtMYjr5t+NjrNNd2Q+VUJPlimHGw5jAowjsQSTk3ndcvJYeIVs+AwLqNTKc3dY4
Oxx1IZ2RngDC63PmZUgh2Bs8pwFg7HaZJejmtq5jY8eHJZM/QMkCJX9TSRCZsMRB
n0GxfCYabX526h3Yo94d74s5xRnHaC+Lem8PU/VEGR3/dMn21jf/PI9e+/0BnBTC
iET2gkU70c4lunWkFHMd
=LZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 06 Sep 2016 11:38:01 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (36 commits)
block: Allow node name for 'qemu-io' HMP command
qemu-iotests: Log QMP traffic in debug mode
block jobs: Improve error message for missing job ID
coroutine: Assert that no locks are held on termination
coroutine: Let CoMutex remember who holds it
qcow2: fix iovec size at qcow2_co_pwritev_compressed
test-coroutine: Fix coroutine pool corruption
qemu-iotests: add vmdk for test backup compression in 055
qemu-iotests: test backup compression in 055
blockdev-backup: added support for data compression
drive-backup: added support for data compression
block: simplify blockdev-backup
block: simplify drive-backup
block/io: turn on dirty_bitmaps for the compressed writes
block: remove BlockDriver.bdrv_write_compressed
qcow: cleanup qcow_co_pwritev_compressed to avoid the recursion
qcow: add qcow_co_pwritev_compressed
vmdk: add vmdk_co_pwritev_compressed
qcow2: cleanup qcow2_co_pwritev_compressed to avoid the recursion
qcow2: add qcow2_co_pwritev_compressed
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- cpumodel support for s390x
- various fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hiH2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160906-v2' into staging
First (big) chunk of s390x updates:
- cpumodel support for s390x
- various fixes and improvements
# gpg: Signature made Tue 06 Sep 2016 16:09:53 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20160906-v2: (38 commits)
s390x/cpumodel: implement QMP interface "query-cpu-model-baseline"
s390x/cpumodel: implement QMP interface "query-cpu-model-comparison"
s390x/cpumodel: implement QMP interface "query-cpu-model-expansion"
qmp: add QMP interface "query-cpu-model-baseline"
qmp: add QMP interface "query-cpu-model-comparison"
qmp: add QMP interface "query-cpu-model-expansion"
s390x/kvm: don't enable key wrapping if msa3 is disabled
s390x/kvm: let the CPU model control CMM(A)
s390x/kvm: disable host model for problematic compat machines
s390x/kvm: implement CPU model support
s390x/kvm: allow runtime-instrumentation for "none" machine
s390x/sclp: propagate hmfai
s390x/sclp: propagate the mha via sclp
s390x/sclp: propagate the ibc val (lowest and unblocked ibc)
s390x/sclp: indicate sclp features
s390x/sclp: introduce sclp feature blocks
s390x/sclp: factor out preparation of cpu entries
s390x/cpumodel: check and apply the CPU model
s390x/cpumodel: let the CPU model handle feature checks
s390x/cpumodel: expose features and feature groups as properties
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To be able to query the correct host model for the "none" machine,
let's allow runtime-instrumentation for that machine.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-21-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
