A device cannot be a SR-IOV PF and a VF at the same time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-3-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_config_get_bar_addr() had a division by vf_stride. vf_stride needs
to be non-zero when there are multiple VFs, but the specification does
not prohibit to make it zero when there is only one VF.
Do not perform the division for the first VF to avoid division by zero.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-2-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost
devices.
The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these
devices ensures that the backend is capable of offering and providing
support for this feature, and that it can be disabled if the backend
does not support it.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_flush operation.
The goal of the virtqueue_ordered_flush operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to write elements to
the used/descriptor ring in-order and then update used_idx.
The function iterates through the VirtQueueElement used_elems array
in-order starting at vq->used_idx. If the element is valid (filled), the
element is written to the used/descriptor ring. This process continues
until we find an invalid (not filled) element.
For packed VQs, the first entry (at vq->used_idx) is written to the
descriptor ring last so the guest doesn't see any invalid descriptors.
If any elements were written, the used_idx is updated.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_fill operation.
The goal of the virtqueue_ordered_fill operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to search for this
now-used element, set its length, and mark the element as filled in
the VirtQueue's used_elems array.
By marking the element as filled, it will indicate that this element has
been processed and is ready to be flushed, so long as the element is
in-order.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support in virtqueue_split_pop and
virtqueue_packed_pop.
VirtQueueElements popped from the available/descritpor ring are added to
the VirtQueue's used_elems array in-order and in the same fashion as
they would be added the used and descriptor rings, respectively.
This will allow us to keep track of the current order, what elements
have been written, as well as an element's essential data after being
processed.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'level' field in vtd_iotlb_key is an unsigned integer.
We don't need to store level as an int in vtd_lookup_iotlb.
This is not an issue by itself, but using unsigned here seems cleaner.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-5-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per the below code, it can overflow as am can be larger than 8 according
to the CH 6.5.2.3 IOTLB Invalidate. Use uint64_t to avoid overflows.
Fixes: b5a280c008 ("intel-iommu: add IOTLB using hash table")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These 2 macros are for high 64-bit of the FRCD registers.
Declarations have to be moved accordingly.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When setting the parameters of a PCM stream, we compute the bit flag
with the format and rate values as shift operand to check if they are
set in supported_formats and supported_rates.
If the guest provides a format/rate value which when shifting 1 results
in a value bigger than the number of bits in
supported_formats/supported_rates, we must report an error.
Previously, this ended up triggering the not reached assertions later
when converting to internal QEMU values.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2416
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2416-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When reading input audio in the virtio-snd input callback,
virtio_snd_pcm_in_cb(), we do not check whether the iov can actually fit
the data buffer. This is because we use the buffer->size field as a
total-so-far accumulator instead of byte-size-left like in TX buffers.
This triggers an out of bounds write if the size of the virtio queue
element is equal to virtio_snd_pcm_status, which makes the available
space for audio data zero. This commit adds a check for reaching the
maximum buffer size before attempting any writes.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2427
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2427-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64 ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar protection to that provided for -numa memdev=x
to make sure that memory used to back a type3 device is not also mapped
as normal RAM, or for multiple type3 devices.
This is an easy footgun to remove and seems multiple people have
run into it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, if the function fails during the key_len check, the op_code
does not have a proper value, causing virtio_crypto_free_create_session_req
not to free the memory correctly, leading to a memory leak.
By setting the op_code before performing any checks, we ensure that
virtio_crypto_free_create_session_req has the correct context to
perform cleanup operations properly, thus preventing memory leaks.
ASAN log:
==3055068==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x5586a75e6ddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7fb6b63b6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x5586a864bbde in virtio_crypto_handle_ctrl hw/virtio/virtio-crypto.c:407:19
#3 0x5586a94fc84c in virtio_queue_notify_vq hw/virtio/virtio.c:2277:9
#4 0x5586a94fc0a2 in virtio_queue_host_notifier_read hw/virtio/virtio.c:3641:9
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-Id: <20240702211835.3064505-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
-----BEGIN PGP SIGNATURE-----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=/aEm
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
# DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
# Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
# zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
# JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
# n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
# lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
# nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
# qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
# oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
# dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
# IOAc7Tn3TIm5MpAxXOXgJA==
# =/aEm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 11:19:17 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
hvf: arm: Do not advance PC when raising an exception
tests/arm-cpu-features: Do not assume PMU availability
tests/tcg/aarch64: Add test cases for SME FMOPA (widening)
target/arm: Use FPST_F16 for SME FMOPA (widening)
target/arm: Use float_status copy in sme_fmopa_s
hw/arm/smmu: Refactor SMMU OAS
hw/arm/smmuv3: Support and advertise nesting
hw/arm/smmuv3: Handle translation faults according to SMMUPTWEventInfo
hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
hw/arm/smmu: Support nesting in the rest of commands
hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmid
hw/arm/smmu: Support nesting in smmuv3_range_inval()
hw/arm/smmu-common: Support nested translation
hw/arm/smmu-common: Add support for nested TLB
hw/arm/smmu-common: Rework TLB lookup for nesting
hw/arm/smmuv3: Translate CD and TT using stage-2 table
hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDR
hw/arm/smmu: Consolidate ASID and VMID types
hw/arm/smmu: Split smmuv3_translate()
hw/arm/smmu: Use enum for SMMU stage
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
SMMUv3 OAS is currently hardcoded in the code to 44 bits, for nested
configurations that can be a problem, as stage-2 might be shared with
the CPU which might have different PARANGE, and according to SMMU manual
ARM IHI 0070F.b:
6.3.6 SMMU_IDR5, OAS must match the system physical address size.
This patch doesn't change the SMMU OAS, but refactors the code to
make it easier to do that:
- Rely everywhere on IDR5 for reading OAS instead of using the
SMMU_IDR5_OAS macro, so, it is easier just to change IDR5 and
it propagages correctly.
- Add additional checks when OAS is greater than 48bits.
- Remove unused functions/macros: pa_range/MAX_PA.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-19-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is in place, consolidate parsing of STE cfg and setting
translation stage.
Advertise nesting if stage requested is "nested".
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-18-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, to check if faults are enabled, it was sufficient to check
the current stage of translation and check the corresponding
record_faults flag.
However, with nesting, it is possible for stage-1 (nested) translation
to trigger a stage-2 fault, so we check SMMUPTWEventInfo as it would
have the correct stage set from the page table walk.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-17-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IOMMUTLBEvent only understands IOVA, for stage-1 or stage-2
SMMU instances we consider the input address as the IOVA, but when
nesting is used, we can't mix stage-1 and stage-2 addresses, so for
nesting only stage-1 is considered the IOVA and would be notified.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-16-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some commands need rework for nesting, as they used to assume S1
and S2 are mutually exclusive:
- CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported
- CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise
invalidate everything, this required a new vmid invalidation
function for stage-1 only (ASID >= 0)
Also, rework trace events to reflect the new implementation.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-15-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, Instead of doing TLB invalidation by ASID only, VMID will be
also required.
Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID.
However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID
which is a stage-1 command, so passing VMID = -1 keeps the original
behaviour.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-14-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With nesting, we would need to invalidate IPAs without
over-invalidating stage-1 IOVAs. This can be done by
distinguishing IPAs in the TLBs by having ASID=-1.
To achieve that, rework the invalidation for IPAs to have a
separate function, while for IOVA invalidation ASID=-1 means
invalidate for all ASIDs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-13-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When nested translation is requested, do the following:
- Translate stage-1 table address IPA into PA through stage-2.
- Translate stage-1 table walk output (IPA) through stage-2.
- Create a single TLB entry from stage-1 and stage-2 translations
using logic introduced before.
smmu_ptw() has a new argument SMMUState which include the TLB as
stage-1 table address can be cached in there.
Also in smmu_ptw(), a separate path used for nesting to simplify the
code, although some logic can be combined.
With nested translation class of translation fault can be different,
from the class of the translation, as faults from translating stage-1
tables are considered as CLASS_TT and not CLASS_IN, a new member
"is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults
from walking stage 1 translation table and faults from translating
an IPA for a transaction.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-12-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for nested (combined) TLB entries.
The main function combine_tlb() is not used here but in the next
patches, but to simplify the patches it is introduced first.
Main changes:
1) New field added in the SMMUTLBEntry struct: parent_perm, for
nested TLB, holds the stage-2 permission, this can be used to know
the origin of a permission fault from a cached entry as caching
the “and” of the permissions loses this information.
SMMUPTWEventInfo is used to hold information about PTW faults so
the event can be populated, the value of stage used to be set
based on the current stage for TLB permission faults, however
with the parent_perm, it is now set based on which perm has
the missing permission
When nesting is not enabled it has the same value as perm which
doesn't change the logic.
2) As combined TLB implementation is used, the combination logic
chooses:
- tg and level from the entry which has the smallest addr_mask.
- Based on that the iova that would be cached is recalculated.
- Translated_addr is chosen from stage-2.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next patch, combine_tlb() will be added which combines 2 TLB
entries into one for nested translations, which chooses the granule
and level from the smallest entry.
This means that with nested translation, an entry can be cached with
the granule of stage-2 and not stage-1.
However, currently, the lookup for an IOVA is done with input stage
granule, which is stage-1 for nested configuration, which will not
work with the above logic.
This patch reworks lookup in that case, so it falls back to stage-2
granule if no entry is found using stage-1 granule.
Also, drop aligning the iova to avoid over-aligning in case the iova
is cached with a smaller granule, the TLB lookup will align the iova
anyway for each granule and level, and the page table walker doesn't
consider the page offset bits.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-10-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ARM SMMU architecture specification (ARM IHI 0070 F.b),
In "5.2 Stream Table Entry":
[51:6] S1ContextPtr
If Config[1] == 1 (stage 2 enabled), this pointer is an IPA translated by
stage 2 and the programmed value must be within the range of the IAS.
In "5.4.1 CD notes":
The translation table walks performed from TTB0 or TTB1 are always performed
in IPA space if stage 2 translations are enabled.
This patch implements translation of the S1 context descriptor pointer and
TTBx base addresses through the S2 stage (IPA -> PA)
smmuv3_do_translate() is updated to have one arg which is translation
class, this is useful to:
- Decide wether a translation is stage-2 only or use the STE config.
- Populate the class in case of faults, WALK_EABT is left unchanged
for stage-1 as it is always IN, while stage-2 would match the
used class (TT, IN, CD), this will change slightly when the ptw
supports nested translation as it can also issue TT event with
class IN.
In case for stage-2 only translation, used in the context of nested
translation, the stage and asid are saved and restored before and
after calling smmu_translate().
Translating CD or TTBx can fail for the following reasons:
1) Large address size: This is described in
(3.4.3 Address sizes of SMMU-originated accesses)
- For CD ptr larger than IAS, for SMMUv3.1, it can trigger either
C_BAD_STE or Translation fault, we implement the latter as it
requires no extra code.
- For TTBx, if larger than the effective stage 1 output address size, it
triggers C_BAD_CD.
2) Faults from PTWs (7.3 Event records)
- F_ADDR_SIZE: large address size after first level causes stage 2 Address
Size fault (Also in 3.4.3 Address sizes of SMMU-originated accesses)
- F_PERMISSION: Same as an address translation. However, when
CLASS == CD, the access is implicitly Data and a read.
- F_ACCESS: Same as an address translation.
- F_TRANSLATION: Same as an address translation.
- F_WALK_EABT: Same as an address translation.
These are already implemented in the PTW logic, so no extra handling
required.
As in CD and TTBx translation context, the iova is not known, setting
the InputAddr was removed from "smmuv3_do_translate" and set after
from "smmuv3_translate" with the new function "smmuv3_fixup_event"
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-9-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, smmuv3_do_translate() will be used to translate the CD and the
TTBx, instead of re-writting the same logic to convert the returned
cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASID and VMID used to be uint16_t in the translation config, however,
in other contexts they can be int as -1 in case of TLB invalidation,
to represent all (don’t care).
When stage-2 was added asid was set to -1 in stage-2 and vmid to -1
in stage-1 configs. However, that meant they were set as (65536),
this was not an issue as nesting was not supported and no
commands/lookup uses both.
With nesting, it’s critical to get this right as translation must be
tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2.
Represent ASID/VMID everywhere as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
smmuv3_translate() does everything from STE/CD parsing to TLB lookup
and PTW.
Soon, when nesting is supported, stage-1 data (tt, CD) needs to be
translated using stage-2.
Split smmuv3_translate() to 3 functions:
- smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW,
TLB insertion, all the functions are already there, this just puts
them together.
This also simplifies the code as it consolidates event generation
in case of TLB lookup permission failure or in TT selection.
- smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does
the event population in case of errors.
- smmuv3_translate(), now calls smmuv3_do_translate() for
translation while the rest is the same.
Also, add stage in trace_smmuv3_translate_success()
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-6-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, translation stage is represented as an int, where 1 is stage-1 and
2 is stage-2, when nested is added, 3 would be confusing to represent nesting,
so we use an enum instead.
While keeping the same values, this is useful for:
- Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is
stage-2 and both is nested.
- Tracing, as stage is printed as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20240715084519.1189624-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMMUv3 spec (ARM IHI 0070 F.b - 7.3 Event records) defines the
class of events faults as:
CLASS: The class of the operation that caused the fault:
- 0b00: CD, CD fetch.
- 0b01: TTD, Stage 1 translation table fetch.
- 0b10: IN, Input address
However, this value was not set and left as 0 which means CD and not
IN (0b10).
Another problem was that stage-2 class is considered IN not TT for
EABT, according to the spec:
Translation of an IPA after successful stage 1 translation (or,
in stage 2-only configuration, an input IPA)
- S2 == 1 (stage 2), CLASS == IN (Input to stage)
This would change soon when nested translations are supported.
While at it, add an enum for class as it would be used for nesting.
However, at the moment stage-1 and stage-2 use the same class values,
except for EABT.
Fixes: 9bde7f0674 “hw/arm/smmuv3: Implement translate callback”
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20240715084519.1189624-4-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the following events (ARM IHI 0070 F.b - 7.3 Event records):
- F_TRANSLATION
- F_ACCESS
- F_PERMISSION
- F_ADDR_SIZE
If fault occurs at stage 2, S2 == 1 and:
- If translating an IPA for a transaction (whether by input to
stage 2-only configuration, or after successful stage 1 translation),
CLASS == IN, and IPA is provided.
At the moment only CLASS == IN is used which indicates input
translation.
However, this was not implemented correctly, as for stage 2, the code
only sets the S2 bit but not the IPA.
This field has the same bits as FetchAddr in F_WALK_EABT which is
populated correctly, so we don’t change that.
The setting of this field should be done from the walker as the IPA address
wouldn't be known in case of nesting.
For stage 1, the spec says:
If fault occurs at stage 1, S2 == 0 and:
CLASS == IN, IPA is UNKNOWN.
So, no need to set it to for stage 1, as ptw_info is initialised by zero in
smmuv3_translate().
Fixes: e703f7076a “hw/arm/smmuv3: Add page table walk for stage-2”
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-3-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the SMMU architecture specification (ARM IHI 0070 F.b),
in “3.4 Address sizes”
The address output from the translation causes a stage 1 Address Size
fault if it exceeds the range of the effective IPA size for the given CD.
However, this check was missing.
There is already a similar check for stage-2 against effective PA.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Message-id: 20240715084519.1189624-2-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is common practice when implementing double-buffering on VideoCore
to do so by multiplying the height of the virtual buffer by the
number of virtual screens desired (i.e., two - in the case of
double-bufferring).
At present, this won't work in QEMU because the logic in
fb_use_offsets require that both the virtual width and height exceed
their physical counterparts.
This appears to be unintentional/a typo and indeed the comment
states; "Experimentally, the hardware seems to do this only if the
viewport size is larger than the physical screen". The
viewport/virtual size would be larger than the physical size if
either virtual dimension were larger than their physical counterparts
and not necessarily both.
Signed-off-by: SamJakob <me@samjakob.com>
Message-id: 20240713160353.62410-1-me@samjakob.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
-----BEGIN PGP SIGNATURE-----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=pM6B
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.1
* Support the zimop, zcmop, zama16b and zabha extensions
* Validate the mode when setting vstvec CSR
* Add decode support for Zawrs extension
* Update the KVM regs to Linux 6.10-rc5
* Add smcntrpmf extension support
* Raise an exception when CSRRS/CSRRC writes a read-only CSR
* Re-insert and deprecate 'riscv,delegate' in virt machine device tree
* roms/opensbi: Update to v1.5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT
# gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm
# DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F
# uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2
# YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc
# Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo
# SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK
# W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA
# Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL
# lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn
# 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ
# NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI=
# =pM6B
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits)
roms/opensbi: Update to v1.5
hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'
target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR
target/riscv: Expose the Smcntrpmf config
target/riscv: Do not setup pmu timer if OF is disabled
target/riscv: More accurately model priv mode filtering.
target/riscv: Start counters from both mhpmcounter and mcountinhibit
target/riscv: Enforce WARL behavior for scounteren/hcounteren
target/riscv: Save counter values during countinhibit update
target/riscv: Implement privilege mode filtering for cycle/instret
target/riscv: Only set INH fields if priv mode is available
target/riscv: Add cycle & instret privilege mode filtering support
target/riscv: Add cycle & instret privilege mode filtering definitions
target/riscv: Add cycle & instret privilege mode filtering properties
target/riscv: Fix the predicate functions for mhpmeventhX CSRs
target/riscv: Combine set_mode and set_virt functions.
target/riscv/kvm: update KVM regs to Linux 6.10-rc5
disas/riscv: Add decode for Zawrs extension
target/riscv: Validate the mode in write_vstvec
disas/riscv: Support zabha disassemble
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since
it is the correct name as per dt-bindings, and the absence of the
correct name will result in validation fails when dumping the dtb and
using dt-validate.
But this change has a side-effect: every other firmware available that
is AIA capable is using 'riscv,delegate', and it will fault/misbehave if
this property isn't present. The property was added back in QEMU 7.0,
meaning we have 2 years of firmware development using the wrong
property.
Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows
older firmwares to keep booting with the 'virt' machine.
'riscv,delegate' is then marked for future deprecation with its use
being discouraged from now on.
Cc: Conor Dooley <conor@kernel.org>
Cc: Anup Patel <apatel@ventanamicro.com>
Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Cédric Le Goater" <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For qemu_open_old(), osdep.h said:
> Don't introduce new usage of this function, prefer the following
> qemu_open/qemu_create that take an "Error **errp".
So replace qemu_open_old() with qemu_open().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
