It is incorrect to have the VIRTIO_NET_HDR_F_NEEDS_CSUM set when
checksum offloading is disabled so clear the bit.
TCP/UDP checksum is usually offloaded when the peer requires virtio
headers because they can instruct the peer to compute checksum. However,
igb disables TX checksum offloading when a VF is enabled whether the
peer requires virtio headers because a transmitted packet can be routed
to it and it expects the packet has a proper checksum. Therefore, it
is necessary to have a correct virtio header even when checksum
offloading is disabled.
A real TCP/UDP checksum will be computed and saved in the buffer when
checksum offloading is disabled. The virtio specification requires to
set the packet checksum stored in the buffer to the TCP/UDP pseudo
header when the VIRTIO_NET_HDR_F_NEEDS_CSUM bit is set so the bit must
be cleared in that case.
Fixes: ffbd2dbd8e ("e1000e: Perform software segmentation for loopback")
Buglink: https://issues.redhat.com/browse/RHEL-23067
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It is possible to have another VLAN tag even if the packet is already
tagged.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The old eth_setup_vlan_headers has no user so remove it and rename
eth_setup_vlan_headers_ex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows to use the network packet abstractions even if PCI is not
used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is intended to be followed by another change for the interface.
It also fixes the leak of memory mapping when the specified memory is
partially mapped.
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Align the l3_hdr member of NetTxPkt by defining it as a union of
ip_header, ip6_header, and an array of octets.
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1544
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No segmentation should be performed if gso type is
VIRTIO_NET_HDR_GSO_NONE even if ECN bit is set.
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1544
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb used to specify the PF as DMA requester when reading Tx packets.
This made Tx requests from VFs to be performed on the address space of
the PF, defeating the purpose of SR-IOV. Add some logic to change the
requester depending on the queue, which can be assigned to a VF.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Check the payload length if checksumming to ensure the payload contains
the space for the resulting value.
This bug was found by Alexander Bulekov with the fuzzer:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_6aeaa33e7211ecd603726c53e834df4c6d1e08bc
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There was no proper implementation of TCP segmentation before this
change, and net_tx_pkt relied solely on IPv4 fragmentation. Not only
this is not aligned with the specification, but it also resulted in
corrupted IPv6 packets.
This is particularly problematic for the igb, a new proposed device
implementation; igb provides loopback feature for VMDq and the feature
relies on software segmentation.
Implement proper TCP segmentation in net_tx_pkt to fix such a scenario.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e didn't perform software segmentation for loopback if virtio-net
header is enabled, which is wrong.
To fix the problem, introduce net_tx_pkt_send_custom(), which allows the
caller to specify whether offloading should be assumed or not.
net_tx_pkt_send_custom() also allows the caller to provide a custom
sending function. Packets with virtio-net headers and ones without
virtio-net headers will be provided at the same time so the function
can choose the preferred version. In case of e1000e loopback, it prefers
to have virtio-net headers as they allows to skip the checksum
verification if VIRTIO_NET_HDR_F_DATA_VALID is set.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The new function qemu_get_using_vnet_hdr() allows to automatically
determine if virtio-net header is used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_tx_pkt_build_vheader() inspects TCP header but had no check for
the header size, resulting in an undefined behavior. Check the header
size and drop the packet if the header is too small.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU currently crashes when it's started like this:
cat << EOF | ./qemu-system-i386 -device vmxnet3 -nodefaults -qtest stdio
outl 0xcf8 0x80001014
outl 0xcfc 0xe0001000
outl 0xcf8 0x80001018
outl 0xcf8 0x80001004
outw 0xcfc 0x7
outl 0xcf8 0x80001083
write 0x0 0x1 0xe1
write 0x1 0x1 0xfe
write 0x2 0x1 0xbe
write 0x3 0x1 0xba
writeq 0xe0001020 0xefefff5ecafe0000
writeq 0xe0001020 0xffff5e5ccafe0002
EOF
It hits this assertion:
qemu-system-i386: ../qemu/hw/net/net_tx_pkt.c:453: net_tx_pkt_reset:
Assertion `pkt->raw' failed.
This happens because net_tx_pkt_init() is called with max_frags == 0 and
thus the allocation
p->raw = g_new(struct iovec, max_frags);
results in a NULL pointer that causes the
assert(pkt->raw);
in net_tx_pkt_reset() to fail later. To fix this issue we can check
that max_raw_frags was not zero before asserting that pkt->raw is
a non-NULL pointer.
Buglink: https://bugs.launchpad.net/qemu/+bug/1890157
Message-Id: <20210715193219.1132571-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch switches to use qemu_receive_receive_iov() which can detect
reentrancy and return early.
This is intended to address CVE-2021-3416.
Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
An assertion failure issue was found in the code that processes network packets
while adding data fragments into the packet context. It could be abused by a
malicious guest to abort the QEMU process on the host. This patch replaces the
affected assert() with a conditional statement, returning false if the current
data fragment exceeds max_raw_frags.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1708065
With network backend with 'virtual header' - there was an issue
in 'plen' field. Overall, during TSO, 'plen' would be changed,
but with 'vheader' this field should be set to the size of the
payload itself instead of '0'.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Added fix for checksum offload for IPv6 if a backend doesn't
have a virtual header.
This patch is a part of IPv6 fragmentation.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The checksum algorithm used by IPv4, TCP and UDP allows a zero value
to be represented by either 0x0000 and 0xFFFF. But per RFC 768, a zero
UDP checksum must be transmitted as 0xFFFF because 0x0000 is a special
value meaning no checksum.
Substitute 0xFFFF whenever a checksum is computed as zero when
modifying a UDP datagram header. Doing this on IPv4 and TCP checksums
is unnecessary but legal. Add a wrapper for net_checksum_finish() that
makes the substitution.
(We can't just change net_checksum_finish(), as that function is also
used by receivers to verify checksums, and in that case the expected
value is always 0x0000.)
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Network transport abstraction layer supports packet fragmentation.
While fragmenting a packet, it checks for more fragments from
packet length and current fragment length. It is susceptible
to an infinite loop, if the current fragment length is zero.
Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
To make this device and network packets
abstractions ready for IOMMU.
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.
Changes are:
1. Support iovec lists for RX buffers
2. Deeper RX packets parsing
3. Loopback option for TX packets
4. Extended VLAN headers handling
5. RSS processing for RX packets
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch drops "vmx" prefix from packet abstractions names
to emphasize the fact they are generic and not tied to any
specific network device.
These abstractions will be reused by e1000e emulation implementation
introduced by following patches so their names need generalization.
This patch (except renamed files, adjusted comments and changes in MAINTAINTERS)
was produced by:
git grep -lz 'vmxnet_tx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_tx_pkt/net_tx_pkt/g"
git grep -lz 'vmxnet_rx_pkt' | xargs -0 perl -i'' -pE "s/vmxnet_rx_pkt/net_rx_pkt/g"
git grep -lz 'VmxnetTxPkt' | xargs -0 perl -i'' -pE "s/VmxnetTxPkt/NetTxPkt/g"
git grep -lz 'VMXNET_TX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_TX_PKT/NET_TX_PKT/g"
git grep -lz 'VmxnetRxPkt' | xargs -0 perl -i'' -pE "s/VmxnetRxPkt/NetRxPkt/g"
git grep -lz 'VMXNET_RX_PKT' | xargs -0 perl -i'' -pE "s/VMXNET_RX_PKT/NET_RX_PKT/g"
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_rx_pkt.c
sed -ie 's/VMXNET_/NET_/g' hw/net/vmxnet_tx_pkt.c
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
