Rename qemu_getrampagesize() to qemu_minrampagesize(). While at it,
properly rename find_max_supported_pagesize() to
find_min_backend_pagesize().
s390x is actually interested into the maximum ram pagesize, so
introduce and use qemu_maxrampagesize().
Add a TODO, indicating that looking at any mapped memory backends is not
100% correct in some cases.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-3-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Right now we configure the pagesize quite early, when initializing KVM.
This is long before system memory is actually allocated via
memory_region_allocate_system_memory(), and therefore memory backends
marked as mapped.
Instead, let's configure the maximum page size after initializing
memory in s390_memory_init(). cap_hpage_1m is still properly
configured before creating any CPUs, and therefore before configuring
the CPU model and eventually enabling CMMA.
This is not a fix but rather a preparation for the future, when initial
memory might reside on memory backends (not the case for s390x right now)
We will replace qemu_getrampagesize() soon by a function that will always
return the maximum page size (not the minimum page size, which only
works by pure luck so far, as there are no memory backends).
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There is no point in coding for a 2GB offset when the max TB size
is already limited to 64k. If we further restrict to 32k then we
can eliminate the extra ADDIS instruction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the TB generates too much code, such that backend relocations
overflow, try again with a smaller TB. In support of this, move
relocation processing from a random place within tcg_out_op, in
the handling of branch opcodes, to a new function at the end of
tcg_gen_code.
This is not a complete solution, as there are additional relocs
generated for out-of-line ldst handling and constant pools.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a TB generates too much code, try again with fewer insns.
Fixes: https://bugs.launchpad.net/bugs/1824853
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will let backends implement the double-word shift operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Will be helpful for s390x. Input 128 bit and output 64 bit only,
which is sufficient for now.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225154204.26751-1-david@redhat.com>
[rth: Add matching tcg_gen_extract2_i32.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=k5c2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lersek/tags/edk2-pull-2019-04-22' into staging
Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").
# gpg: Signature made Mon 22 Apr 2019 19:20:08 BST
# gpg: using RSA key D39DA71E0D496CFA
# gpg: Good signature from "Laszlo Ersek <lersek@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F5D9 660F 1BA5 F310 A95A C5E0 466A EAE0 6125 3988
# Subkey fingerprint: B3A5 5D3F 88A8 90ED 2E63 3E8D D39D A71E 0D49 6CFA
* remotes/lersek/tags/edk2-pull-2019-04-22:
MAINTAINERS: add the "EDK2 Firmware" subsystem
Makefile: install the edk2 firmware images and their descriptors
tests: add missing dependency to build QTEST_QEMU_BINARY, round 2
pc-bios: document the edk2 firmware images; add firmware descriptors
pc-bios: add edk2 firmware binaries and variable store templates
roms: build edk2 firmware binaries and variable store templates
roms/Makefile: replace the $(EDK2_EFIROM) target with "edk2-basetools"
roms/edk2-funcs.sh: add the qemu_edk2_get_thread_count() function
roms/edk2: advance to tag edk2-stable201903
tests/uefi-test-tools/build.sh: work around TianoCore#1607
roms/edk2-funcs.sh: require gcc-4.8+ for building i386 and x86_64
roms: lift "edk2-funcs.sh" from "tests/uefi-test-tools/build.sh"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=kfAU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-monitor-2019-04-18' into staging
Error reporting & monitor patches for 2019-04-18
# gpg: Signature made Thu 18 Apr 2019 21:40:41 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-monitor-2019-04-18: (36 commits)
include: Move fprintf_function to disas/
disas: Rename include/disas/bfd.h back to include/disas/dis-asm.h
monitor: Clean up how monitor_disas() funnels output to monitor
qom/cpu: Simplify how CPUClass:cpu_dump_state() prints
qemu-print: New qemu_fprintf(), qemu_vfprintf()
qom/cpu: Simplify how CPUClass::dump_statistics() prints
target/i386: Simplify how x86_cpu_dump_local_apic_state() prints
target: Clean up how the dump_mmu() print
target: Simplify how the TARGET_cpu_list() print
memory: Clean up how mtree_info() prints
block/qapi: Clean up how we print to monitor or stdout
qsp: Simplify how qsp_report() prints
tcg: Simplify how dump_drift_info() prints
tcg: Simplify how dump_exec_info() prints
tcg: Simplify how dump_opcount_info() prints
trace: Simplify how st_print_trace_file_status() prints
include: Include fprintf-fn.h only where needed
monitor: Simplify how -device/device_add print help
char-pty: Print "char device redirected" message to stdout
char: Make -chardev help print to stdout
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous commits have eliminated fprintf_function outside
disassemblers, simplifying code and cleaning up the ugly type-punning
fprintf_function seems to attract. Move fprintf_function to
include/disas/dis-asm.h to reduce the temptation to abuse it.
I considered renaming it to fprintf_ftype (reverting that part of
commit 6e2d864edf, v0.14.0) to get us closer to binutils, but I
figure the fork is too distant to make this worthwhile.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-18-armbru@redhat.com>
Commit dc99065b5f (v0.1.0) added dis-asm.h from binutils.
Commit 43d4145a98 (v0.1.5) inlined bfd.h into dis-asm.h to remove the
dependency on binutils.
Commit 76cad71136 (v1.4.0) moved dis-asm.h to include/disas/bfd.h.
The new name is confusing when you try to match against (pre GPLv3+)
binutils. Rename it back. Keep it in the same directory, of course.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
INIT_DISASSEMBLE_INFO() takes an fprintf()-like callback and a FILE *
to pass to it. monitor_disas() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Pass qemu_fprintf() and NULL instead.
monitor_fprintf() is now unused; delete it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-16-armbru@redhat.com>
[Commit message typo corrected]
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
Code that doesn't want to know about current monitor vs. stdout
vs. stderr takes an fprintf_function callback and a FILE * argument to
pass to it. Actual arguments are either fprintf() and stdout or
stderr, or monitor_fprintf() and the current monitor cast to FILE *.
monitor_fprintf() casts it right back, and is otherwise identical to
monitor_printf(). The type-punning is ugly.
New qemu_fprintf() and qemu_vprintf() address this need without type
punning: they are like fprintf() and vfprintf(), except they print to
the current monitor when passed a null FILE *. The next commits will
put them to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-14-armbru@redhat.com>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it.
Its only caller hmp_info_cpustats() (via cpu_dump_statistics()) passes
monitor_fprintf() and the current monitor cast to FILE *.
monitor_fprintf() casts it right back, and is otherwise identical to
monitor_printf(). The type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-13-armbru@redhat.com>
x86_cpu_dump_local_apic_state() takes an fprintf()-like callback and a
FILE * to pass to it, and so do its helper functions.
Its only caller hmp_info_local_apic() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-12-armbru@redhat.com>
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions. Passing around callback
and argument is rather tiresome.
Most dump_mmu() are called only by the target's hmp_info_tlb(). These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU. These calls pass fprintf() and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
mtree_info() takes an fprintf()-like callback and a FILE * to pass to
it, and so do its helper functions. Passing around callback and
argument is rather tiresome.
Its only caller hmp_info_mtree() passes monitor_printf() cast to
fprintf_function and the current monitor cast to FILE *.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-9-armbru@redhat.com>
bdrv_snapshot_dump(), bdrv_image_info_specific_dump(),
bdrv_image_info_dump() and their helpers take an fprintf()-like
callback and a FILE * to pass to it.
hmp.c passes monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
qemu-img.c and qemu-io-cmds.c pass fprintf and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-8-armbru@redhat.com>
qsp_report() takes an fprintf()-like callback and a FILE * to pass to
it.
Its only caller hmp_sync_profile() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-7-armbru@redhat.com>
dump_drift_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and a Monitor
* cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf(). The type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-6-armbru@redhat.com>
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.
Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
st_print_trace_file_status() takes an fprintf()-like callback and a
FILE * to pass to it.
Its only caller hmp_trace_file() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-2-armbru@redhat.com>
Commit a95db58f21 added monitor_vfprintf() as an error_printf()
generalized from stderr to arbitrary streams, then used it wrapped in
helper out_printf() to print -device/device_add help to stdout. Use
qemu_printf() instead, and delete monitor_vfprintf() and out_printf().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-16-armbru@redhat.com>
char_pty_open() prints a "char device redirected to PTY_NAME (label
LABEL)" message to the current monitor or else to stderr. This is not
an error, so it shouldn't go to stderr. Print it to stdout instead.
Why is it even printed? No other ChardevClass::open() prints anything
on success. It's because you need to know PTY_NAME to actually use
this char device, e.g. like e.g. "socat STDIO,cfmakeraw FILE:PTY_NAME"
to use the monitor's readline interface. You can get PTY_NAME with
"info chardev" (a.k.a. query-chardev for QMP), but only if you already
have a monitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command line help explicitly requested by the user should be printed
to stdout, not stderr. We do elsewhere. Adjust -chardev to match:
use qemu_printf() instead of error_printf(). Plain printf() would be
wrong because we need to print to the current monitor for "chardev-add
help".
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-14-armbru@redhat.com>
Command line help explicitly requested by the user should be printed
to stdout, not stderr. We do elsewhere. Adjust -drive to match: use
qemu_printf() instead of error_printf(). Plain printf() would be
wrong because we need to print to the current monitor for "drive_add
... format=help".
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-13-armbru@redhat.com>
We commonly want to print to the current monitor if we have one, else
to stdout/stderr. For stderr, have error_printf(). For stdout, all
we have is monitor_vfprintf(), which is rather unwieldy. We often
print to stderr just because error_printf() is easier.
New qemu_printf() and qemu_vprintf() do exactly what's needed. The
next commits will put them to use.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-12-armbru@redhat.com>
printf() & friends return the number of characters written on success,
negative value on error.
monitor_printf(), monitor_vfprintf(), monitor_vprintf(),
error_printf(), error_printf_unless_qmp(), error_vprintf(), and
error_vprintf_unless_qmp() return void. Some of them carry a TODO
comment asking for int instead.
Improve them to return int like printf() does.
This makes our use of monitor_printf() as fprintf_function slightly
less dirty: the function cast no longer adds a return value that isn't
there. It still changes a parameter's pointer type. That will be
addressed in a future commit.
monitor_vfprintf() always returns zero. Improve it to return the
proper value.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-11-armbru@redhat.com>
Command line help help explicitly requested by the user should be
printed to stdout, not stderr. We do elsewhere. Adjust -machine
$TYPE,help and -accel help to match: use printf() instead of
error_printf().
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190417190641.26814-10-armbru@redhat.com>
kvm_s390_mem_op() can fail in two ways: when !cap_mem_op, it returns
-ENOSYS, and when kvm_vcpu_ioctl() fails, it returns -errno set by
ioctl(). Its caller s390_cpu_virt_mem_rw() recovers from both
failures.
kvm_s390_mem_op() prints "KVM_S390_MEM_OP failed" with error_printf()
in the latter failure mode. Since this is obviously a warning, use
warn_report().
Perhaps the reporting should be left to the caller. It could warn on
failure other than -ENOSYS.
Cc: Thomas Huth <thuth@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190417190641.26814-9-armbru@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-8-armbru@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-7-armbru@redhat.com>
Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-5-armbru@redhat.com>
load_fit() reports errors with error_printf() instead of
error_report(). Worse, it even reports errors it actually recovers
from, in fit_cfg_compatible() and fit_load_fdt(). Messed up in
initial commit 51b58561c1.
Convert the helper functions for load_fit() to Error. Make sure each
failure path sets an error.
Fix fit_cfg_compatible() and fit_load_fdt() not to report errors they
actually recover from.
Convert load_fit() to error_report().
Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-4-armbru@redhat.com>
Callbacks ssh_co_readv(), ssh_co_writev(), ssh_co_flush() report
errors to the user with error_printf(). They shouldn't, it's their
caller's job. Replace by a suitable trace point. While there, drop
the unreachable !s->sftp case.
Perhaps we should convert this part of the block driver interface to
Error, so block drivers can pass more detail to their callers. Not
today.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-3-armbru@redhat.com>
