These options are already documented on the man page but missing from
qemu --help.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
English language grammar does not allow usage
of the word "allows" directly followed by an
infinitive, declaring constructs like "something
allows to do somestuff" un-grammatical. Often
it is possible to just insert "one" between "allows"
and "to" to make the construct grammatical, but
usually it is better to re-phrase the statement.
This patch tries to fix 4 examples of "allows to"
usage in qemu doc, but does not address comments
in the code with similar constructs. It also adds
missing "the" in the same line.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A few minor tidy-ups, plus add reference to the new -vga tcx and cg3 options.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It is possible to pre-define a character device with the -chardev option
and reference its id as serial device. The man page does not mention this
feature.
Use case: Use stdio as serial, but do not terminate VM on Ctrl-C
-chardev stdio,id=mystdio,signal=off -serial chardev:mystdio
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The install directory of qemu-bridge-helper is configurable,
but we use a fixed path in the documentation.
DEFAULT_BRIDGE_HELPER macro isn't available in texi mode,
we should always use "/path/to/" prefix for dynamic paths
(e.g.: /path/to/image, /path/to/linux, etc).
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 6a85e60cb9.
Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver"
introduced a memory ring buffer character device driver named
"memory". Commit 3949e59 "qemu-char: Saner naming of memchar stuff &
doc fixes" changed the driver name to "ringbuf", along with a whole
bunch of other names, with the following rationale:
Naming is a mess. The code calls the device driver
CirMemCharDriver, the public API calls it "memory", "memchardev",
or "memchar", and the special commands are named like
"memchar-FOO". "memory" is a particularly unfortunate choice,
because there's another character device driver called
MemoryDriver. Moreover, the device's distinctive property is that
it's a ring buffer, not that's in memory.
This is what we released in 1.4.0.
Unfortunately, the rename missed a critical instance of "memory": the
actual driver name. Thus, the new device could be used only by an
entirely undocumented name. The documented name did not work.
Bummer.
Commit 6a85e60 fixes this by changing the documentation to match the
code. It also changes some, but not all related occurences of
"ringbuf" to "memory". Left alone are identifiers in C code, HMP and
QMP commands. The latter are external interface, so they can't be
changed.
The result is an inconsistent mess. Moreover, "memory" is a rotten
name. The device's distinctive property is that it's a ring buffer,
not that's in memory. User's don't care whether it's in RAM, flash,
or carved into chocolate tablets by Oompa Loompas.
Revert the commit. Next commit will fix just the bug.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Otherwise, a new user will be wondering how to switch between the
console and monitor.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
With mon:stdio you can exit the VM by switching to the monitor and
sending the "quit" command. It is then useful to pass Ctrl-C to the
VM instead of exiting.
This in turn lets us stop tying the default signal handling behavior
to -nographic, removing gratuitous differences between "-display none"
and "-nographic".
This patch changes behavior for "-display none -serial mon:stdio", as
expected, but not for "-display none -serial stdio".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also introduces a new suboption, "cpus=",
which is the default. So after this patch,
-smp n,sockets=y
is the same as
-smp cpus=n,sockets=y
(with "cpu" being some generic thing, referring to
either cores, or threads, or sockets, as before).
We still don't validate relations between different
numbers, for example it is still possible to say
-smp 1,sockets=10
and it will be accepted to mean sockets=1.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1372072012-30305-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is the (implied sub)option name which is optional, not
the value of that (sub)option, make it so in the help output.
(Introduced by commit 22a0e04b9b)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Manual page and qemu-doc on talk about "Bochs BIOS". We use SeaBIOS,
and it implements the feature. Replace by just "BIOS", and drop the
TODO line wondering about the Bochs reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we have memory char device, but the backend name of it
is a little confusion. We actually register it by 'memory', but
the description in qemu-option, the name of open functions
and the new api backend called it 'ringbuf'. It should keep
consistent. This patch named it all to 'memory'.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Added TLS support to the VNC QEMU Websockets implementation.
VNC-TLS needs to be enabled for this feature to be used.
The required certificates are specified as in case of VNC-TLS
with the VNC parameter "x509=<path>".
If the server certificate isn't signed by a rooth authority it needs to
be manually imported in the browser because at least in case of Firefox
and Chrome there is no user dialog, the connection just gets canceled.
As a side note VEncrypt over Websocket doesn't work atm because TLS can't
be stacked in the current implementation. (It also didn't work before)
Nevertheless to my knowledge there is no HTML 5 VNC client which supports
it and the Websocket connection can be encrypted with regular TLS now so
it should be fine for most use cases.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366727581-5772-1-git-send-email-thardeck@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In certain scenario, latency induced by paging is significant and
memory locking is needed. Also, in the scenario with untrusted
guests, latency improvement due to mlock is desired.
This patch introduces a following new option to mlock guest and
qemu memory:
-realtime mlock=on|off
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366382526-26146-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-system-x86_64 -drive file=ssh://hostname/some/image
QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.
You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...). You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).
Current limitations:
- Authentication must be done without passwords or passphrases, using
ssh-agent. Other authentication methods are not supported.
- Uses a single connection, instead of concurrent AIO with multiple
SSH connections.
This is implemented using libssh2 on the client side. The server just
requires a regular ssh daemon with sftp-server support. Most ssh
daemons on Unix/Linux systems will work out of the box.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Seabios already added a new device type to halt booting.
Qemu can add "HALT" at the end of bootindex string, then
seabios will halt booting after trying to boot from all
selected devices.
This patch added a new boot option to configure if boot
from un-selected devices.
This option only effects when boot priority is changed by
bootindex options, the old style(-boot order=..) will still
try to boot from un-selected devices.
v2: add HALT entry in get_boot_devices_list()
v3: rebase to latest qemu upstream
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1363674207-31496-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command through the TPM's
sysfs 'cancel' entry using
echo "1" > /sysfs/class/misc/tpm0/device/cancel
This patch propagates the cancellation of a command inside a VM
to the host TPM's sysfs entry.
It also uses the possibility to cancel the command before QEMU VM
shutdown or reboot, which helps in preventing QEMU from hanging while
waiting for the completion of the command.
To relieve higher layers or users from having to determine the TPM's
cancel sysfs entry, the driver searches for the entry in well known
locations.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is based of off version 9 of Stefan Berger's patch series
"QEMU Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.
This patch adds a passthrough backend driver for passing commands sent to the
emulated TPM device directly to a TPM device opened on the host machine.
Thus it is possible to use a hardware TPM device in a system running on QEMU,
providing the ability to access a TPM in a special state (e.g. after a Trusted
Boot).
This functionality is being used in the acTvSM Trusted Virtualization Platform
which is available on [1].
Usage example:
qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
-device tpm-tis,tpmdev=tpm0 \
-cdrom test.iso -boot d
Some notes about the host TPM:
The TPM needs to be enabled and activated. If that's not the case one
has to go through the BIOS/UEFI and enable and activate that TPM for TPM
commands to work as expected.
It may be necessary to boot the kernel using tpm_tis.force=1 in the boot
command line or 'modprobe tpm_tis force=1' in case of using it as a module.
Regards,
Andreas Niederl, Stefan Berger
[1] http://trustedjava.sourceforge.net/
Signed-off-by: Andreas Niederl <andreas.niederl@iaik.tugraz.at>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix LP#1151450 the wrong description in qemu manual:
'qemu-system-x86_84' should be 'qemu-system-x86_64'.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By MORITA Kazutaka (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: for HMP commit() operations on 'all', skip non-COW drives
sheepdog: add support for connecting to unix domain socket
sheepdog: use inet_connect to simplify connect code
sheepdog: accept URIs
move socket_set_nodelay to osdep.c
slirp/tcp_subr.c: fix coding style in tcp_connect
dataplane: remove EventPoll in favor of AioContext
virtio-blk: fix unplug + virsh reboot
ide/macio: Fix macio DMA initialisation.
This patch adds support for a unix domain socket for a connection
between qemu and local sheepdog server. You can use the unix domain
socket with the following syntax:
$ qemu sheepdog+unix:///<vdiname>?socket=<socket path>[#snapid]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The URI syntax is consistent with the NBD and Gluster syntax. The
syntax is
sheepdog[+tcp]://[host:port]/vdiname[#snapid|#tag]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.
This change requires us to:
* update all the documentation/help text (we take the opportunity
to smooth out minor inconsistencies between the phrasing in
linux-user/bsd-user/system help messages)
* make linux-user and bsd-user defer to qemu-log for the default
logging destination rather than overriding it themselves
* ensure that all logfile closing is done via qemu_log_close()
and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for BDRV_O_UNMAP from the QEMU command-line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Collect them from "Standard options", "File system options", "Virtual
File system pass-through options", "Debug/Expert options".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
--device is under heading "USB options". --name and --uuid are under
"Virtual File system pass-through options". Move all three to
"Standard options".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
End tables before headings, start new ones afterwards. Fixes
incorrect indentation of headings "File system options" and "Virtual
File system pass-through options" in manual page and qemu-doc.
Normalize markup some to increase chances it survives future edits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New device, has never been released, so we can still improve things
without worrying about compatibility.
Naming is a mess. The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO". "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver. Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory. Therefore:
* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
"ringbuf" in the API.
* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.
* Rename device parameter from maxcapacity to size (simple words are
good for you).
* Clearly mark the parameter as optional in documentation.
* Fix error reporting so that chardev-add reports to current monitor,
not stderr.
* Replace cirmem in C identifiers by ringbuf.
* Rework documentation. Document the impact of our crappy UTF-8
handling on reading.
* QMP examples that even work.
I could split this up into multiple commits, but they'd change the
same documentation lines multiple times. Not worth it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Similar to file, except that no separate in/out files are supported
because it's pointless for direct device access. Also the special
tty ioctl hooks (pass through linespeed settings etc) are activated
on Unix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new spice chardev to allow arbitrary communication between the
host and the Spice client via the spice server.
Examples:
This allows the Spice client to have a special port for the qemu
monitor:
... -chardev spiceport,name=org.qemu.monitor,id=monitorport
-mon chardev=monitorport
v2:
- remove support for chardev to chardev linking
- conditionnaly compile with SPICE_SERVER_VERSION
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's no need to add a space at the end of line.
Moreover, it can make problems in some projects that
store the help output into a file (and run couple of
tests based on that) and have space at EOL forbidden.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Somehow we forgot to update this when cache=writeback became the
default. While changing the information on the default, also make the
description of all caches modes a bit more accurate.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
The options no-kvm, no-kvm-pit, no-kvm-pit-reinjection, and no-kvm-irqchip
should be marked as having no argument.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* kiszka/queues/slirp:
slirp: Add domain-search option to slirp's DHCP server
slirp: Don't crash on packets from 0.0.0.0/8.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony: (26 commits)
qemu-io: Use bdrv_drain_all instead of qemu_aio_flush
megasas: Use bdrv_drain_all instead of qemu_aio_flush
vmdk: Fix data corruption bug in WRITE and READ handling
fdc: remove last usage of FD_STATE_SEEK
fdc: fix typo in zero constant
fdc: remove double affectation of FD_MSR_CMDBUSY flag
fdc-tests: add tests for VERIFY command
fdc: implement VERIFY command
fdc-test: Check READ ID
fdc: fix false FD_SR0_SEEK
fdc: fix FD_SR0_SEEK for initial seek on DMA transfers
fdc: fix FD_SR0_SEEK for non-DMA transfers and multi sectors transfers
fdc: use status0 field instead of a local variable
fdc-test: add tests for non-DMA READ command
fdc-test: insert media before fuzzing registers
fdc-test: split test_media_change() test, so insert part can be reused
fdc: Remove status0 parameter from fdctrl_set_fifo()
aio: rename AIOPool to AIOCBInfo
aio: use g_slice_alloc() for AIOCB pooling
aio: switch aiocb_size type int -> size_t
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will create a new QOM object in the '/objects' path. Note that properties
are set in order which allows for simple objects to be initialized entirely
with this option and then realized.
This option is roughly equivalent to -device but for things that are not
devices.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.
[Jan: tiny style adjustments]
Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -tdf option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-pit-reinjection.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-pit option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Releases of qemu-kvm will be interrupted at qemu 1.3.0.
Users should switch to plain qemu releases.
To avoid breaking scenarios which are setup with command line
options specific to qemu-kvm, port these switches from qemu-kvm
to qemu.git.
Port -no-kvm-irqchip option.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This option can be used for passing file descriptors on the
command line. It mirrors the existing add-fd QMP command which
allows an fd to be passed to QEMU via SCM_RIGHTS and added to an
fd set.
This can be combined with commands such as -drive to link file
descriptors in an fd set to a drive:
qemu-kvm -add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
-drive file=/dev/fdset/2,index=0,media=disk
This example adds dups of fds 3 and 4, and the accompanying opaque
strings to the fd set with ID=2. qemu_open() already knows how
to handle a filename of this format. qemu_open() searches the
corresponding fd set for an fd and when it finds a match, QEMU
goes on to use a dup of that fd just like it would have used an
fd that it opened itself.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Update the -help output and documentation so that it recommends
'help' rather than '?' for the various "list valid values for this
option" cases. '?' is deprecated (as it can fail confusingly if
not quoted), so it's better to steer users towards 'help'. ('?'
still works, for backwards compatibility.)
This is the -help option part of the change otherwise done in
commit c8057f9, since we are now past release 1.2 and free to
change our help text without worrying about breaking libvirt.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added an option to let qemu transfer a configuration file to bios,
"etc/boot-fail-wait", which could be specified by command
-boot reboot-timeout=T
T have a max value of 0xffff, unit is ms.
With this option, guest will wait for a given time if not find
bootabled device, then reboot. If reboot-timeout is '-1', guest
will not reboot, qemu passes '-1' to bios by default.
This feature need the new seabios's support.
Seabios pulls the value from the fwcfg "file" interface, this
interface is used because SeaBIOS needs a reliable way of
obtaining a name, value size, and value. It in no way requires
that there be a real file on the user's host machine.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/net:
net: EAGAIN handling for net/socket.c TCP
net: EAGAIN handling for net/socket.c UDP
net: asynchronous send/receive infrastructure for net/socket.c
net: broadcast hub packets if at least one port can receive
net: fix usbnet_receive() packet drops
net: clean up usbnet_receive()
net: add -netdev options to man page
net: do not report queued packets as sent
net: add receive_disabled logic to iov delivery path
eepro100: Fix network hang when rx buffers run out
xen: flush queue when getting an event
e1000: flush queue whenever can_receive can go from false to true
net: notify iothread after flushing queue
It allows to disable memory merge support (KSM on Linux), which is
enabled by default otherwise.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Document the -netdev syntax which supercedes the older -net syntax.
This patch is a first step to making -netdev prominent in the QEMU
manual.
Reported-by: Anatoly Techtonik <techtonik@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Added all spice options to the help string. This can be used by libvirt
to determine which spice related features are supported by qemu.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The seamless-migration flag is required in order to identify
whether libvirt supports the new QEVENT_SPICE_MIGRATE_COMPLETED or not
(by default the flag is off).
New libvirt versions that wait for QEVENT_SPICE_MIGRATE_COMPLETED should turn on this flag.
When this flag is off, spice fallbacks to its old migration method, which
can result in data loss.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch provides a way to optionally suppress spurious interrupts,
as a workaround for systems described below:
Some old operating systems do not handle spurious interrupts well,
and qemu tends to generate them significantly more often than
real hardware.
Examples:
- Microport UNIX System V/386 v 2.1 (ca 1987)
(The main problem I'm fixing: Without this patch, it panics
sporadically when accessing the hard disk.)
- AT&T UNIX System V/386 Release 4.0 Version 2.1a (ca 1991)
See screenshot in "QEMU Official OS Support List":
http://www.claunia.com/qemu/objectManager.php?sClass=application&iId=9
(I don't have this system to test.)
- A report about OS/2 boot lockup from 2004 by Hampa Hug:
http://lists.nongnu.org/archive/html/qemu-devel/2004-09/msg00367.html
(My patch was partially inspired by his.)
Also: http://lists.nongnu.org/archive/html/qemu-devel/2005-06/msg00243.html
(I don't have this system to test.)
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
This patch adds some optional compatibility hacks (default
disabled) to allow Microport UNIX to function under qemu.
I've tried to structure it to be easy to add more hacks for other
old CGA programs, if anyone ever needs them.
Microport UNIX System V/386 v 2.1 (ca 1987) tries to program
the CGA registers directly with neither the assistance of BIOS, nor
with proper handling of EGA/VGA-only registers. Note that it didn't
work on real VGA hardware, either (although in that case, the most
obvious problems seemed to be out-of-range hsync and/or vsync
signalling, rather than the issues in this patch).
Eventually real MDA and/or CGA support might provide an alternative to
this patch, although a hybrid approach like this patch might still
be useful in marginal cases.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
The feature was added in commit cb5a7aa8c3 Sep 2008.
My description is based on "Better VGA retrace emulation (needed
for some DOS games/demos)" from
http://www.boblycat.org/~malc/code/patches/qemu/index.html
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
Add a new '[,dump-guest-core=on|off]' option to the '-machine' option. When
'dump-guest-core=off' is specified, guest memory is omitted from the core dump.
The default behavior continues to be to include guest memory when a core dump is
triggered. In my testing, this brought the core dump size down from 384MB to 6MB
on a 2GB guest.
Is anything additional required to preserve this setting for migration or
savevm? I don't believe so.
Changelog:
v3:
Eliminate globals as per Anthony's suggestion
set no dump from qemu_ram_remap() as well
v2:
move the option from -m to -machine, rename option dump -> dump-guest-core
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.
Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.
This way we can thus create default names to use as the initiator name
based on the guest session.
If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be
iqn.2008-11.org.linux-kvm
If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of
iqn.2008-11.org.linux-kvm:<name>
These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The description for set_password and expire_password commands is
incomplete. This patch fixes the man page that is being generated
to match the real behaviour of these functions.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch improves the description of -nodefaults QEMU command line
option by adding more information what is being disabled using this
command.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is the patch to improve description for -{read|write}config
functions.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using guestfwd=, Qemu only connects the virtual server's TCP port
to a single chardev. This is useless in most cases, as we usually want
to have more than a single connection from the guest to the outside world.
This patch adds a new cmd: target to guestfwd= that allows for execution
of a command on every TCP connection. This leverages the same code as
the -smb parameter, just that here the command is user defined.
Reported-by: Sascha Wilde <wilde@intevation.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
When 'qemu' was used as a product name or as a generic process name,
it is now replaced by the official upper case 'QEMU'.
v2:
Added missing period (hint from Andreas Färber).
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The executable name qemu was replaced some time ago by qemu-system-i386.
Fix all examples accordingly.
Some examples will only work with qemu-system-i386 or qemu-system-x86_64
for obvious reasons ("dos.img").
To keep things simple, I did not vary the executable name.
Place holders like qemu-system-TARGET were also only used once
in the enhanced description for QEMU launches using Wine.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The official spelling is QEMU.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let people use backwards-compatible semantics for devices that
will be affected by the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's only TODO information in qemu man page for -global option. This is a basic description of this option with simple example.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
v4:
- break long line
v3:
- add use case description
- use prop instead of property
v2:
- Use better value in example
Patch:
--
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VNC clients send a shared flag in the client init message. Up to now
qemu completely ignores this. This patch implements shared flag
handling. It comes with three policies: By default qemu behaves as one
would expect: Asking for a exclusive access grants exclusive access to
the client connecting. There is also a desktop sharing mode which
disallows exclusive connects (so one forgetting -shared wouldn't drop
everybody else) and a compatibility mode which mimics the traditional
(but non-conforming) qemu behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds configuration variables for iSCSI to set
initiator-name to use when logging in to the target,
which type of header-digest to negotiate with the target
and username and password for CHAP authentication.
This allows specifying a initiator-name either from the command line
-iscsi initiator-name=iqn.2004-01.com.example:test
or from a configuration file included with -readconfig
[iscsi]
initiator-name = iqn.2004-01.com.example:test
header-digest = CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
user = CHAP username
password = CHAP password
If you use several different targets, you can also configure this on a per
target basis by using a group name:
[iscsi "iqn.target.name"]
...
The configuration file can be read using -readconfig.
Example :
qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.ronnie.test/1
-readconfig iscsi.conf
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the KVM-specific machine option kvm_shadow_mem. It allows to
set a custom shadow MMU size for the virtual machine. This is useful for
stress testing e.g.
Only x86 supports this for now, but it is in principle a generic
concept for all targets with shadow MMUs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* aneesh/for-upstream:
hw/9pfs: Remove O_NOATIME flag from 9pfs open() calls in readonly mode
hw/9pfs: Update MAINTAINERS file
fsdev: Fix parameter parsing for proxy helper
hw/9pfs: Fix crash when mounting with synthfs
hw/9pfs: Preserve S_ISGID
hw/9pfs: Add new security model mapped-file.
The most common use of -net tap is to connect a tap device to a bridge. This
requires the use of a script and running qemu as root in order to allocate a
tap device to pass to the script.
This model is great for portability and flexibility but it's incredibly
difficult to eliminate the need to run qemu as root. The only really viable
mechanism is to use tunctl to create a tap device, attach it to a bridge as
root, and then hand that tap device to qemu. The problem with this mechanism
is that it requires administrator intervention whenever a user wants to create
a guest.
By essentially writing a helper that implements the most common qemu-ifup
script that can be safely given cap_net_admin, we can dramatically simplify
things for non-privileged users. We still support existing -net tap options
as a mechanism for advanced users and backwards compatibility.
Currently, this is very Linux centric but there's really no reason why it
couldn't be extended for other Unixes.
A typical invocation would be similar to one of the following:
qemu linux.img -net bridge -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper"
-net nic,model=virtio
qemu linux.img -netdev bridge,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
The default bridge that we attach to is br0. The thinking is that a distro
could preconfigure such an interface to allow out-of-the-box bridged networking.
Alternatively, if a user wants to use a different bridge, a typical invocation
would be simliar to one of the following:
qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0"
-net nic,model=virtio
qemu linux.img -netdev bridge,br=qemubr0,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the basic in-kernel irqchip support selectable via
-machine ...,kernel_irqchip=on. Leave it off by default until it can
fully replace user space models.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This enable us to do passthrough equivalent security model on NFS directory.
NFS server mostly do root squashing and don't support xattr. Hence we cannot
use 'passthrough' or 'mapped' security model
Also added "mapped-xattr" security to indicate earlier "mapped" security model
Older name is still supported.
POSIX rules regarding ctime update on chmod are not followed by this security model.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* stefanha/trivial-patches:
qemu-nbd: drop loop which can never loop
Make python mandatory
net/socket.c: Fix fd leak in net_socket_listen_init() error paths
gdbstub: Fix fd leak in gdbserver_open() error path
configure: Fix test for supported host CPU type
configure: CONFIG_QEMU_INTERP_PREFIX only for user mode
scsi virtio-blk usb-msd: Clean up device init error messages
Strip trailing '\n' from error_report()'s first argument (again)
qemu-options.hx: fix tls-channel help text
Remove the default compiled out tunnel channel, add the always available
cursor channel. Optimally the man page would depend on compiled in
options, but that's harder to do.
RHBZ: 688586
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add option to use named socket for communicating between proxy helper
and qemu proxy FS. Access to socket can be given by using command line
options -u and -g.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The balloon option is not i386 only, so move it into the standard
options section.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only print options in the help output that are accepted by our arch.
This is less confusing for users and also for other programs that
consume the help output.
The options affected are:
-g and -prom-env only displayed on PPC or SPARC
-win2k-hack, -rtc-td-hack, -no-fd-bootchk, -no-acpi, -no-hpet,
-acpitable, -smbios only displayed on i386
-semihosting only displayed on ARM, M68K or XTENSA
-old-param only displayed on ARM
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds the -drive copy-on-read=on|off command-line option:
copy-on-read=on|off
copy-on-read is "on" or "off" and enables whether to copy read backing
file sectors into the image file. Copy-on-read avoids accessing the
same backing file sectors repeatedly and is useful when the backing
file is over a slow network. By default copy-on-read is off.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line
mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint>
Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below
qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node);
qemu_v9fs_synth_add_file(node, 0777, "testfile",
my_test_read, NULL, NULL);
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This patch adds a short description of how to specify a NBD device
to QEMU.
Syntax for both TCP and Unix Domain Sockets are provided as well
as examples.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new section for device URL syntax for special files and describe the iSCSI
URL with examples
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Preprocessor directives cannot be used in STEXI/ETEXI sections since
they are not passed through the preprocessor. The spicevmc chardev
option help currently uses #if, which is included verbatim in the man
page output.
Fix this by simply stating that spicevmc chardevs are available only in
builds with spice support.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
writeout=immediate implies the after pwritev we do a sync_file_range.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.
Note that simcalls that accept buffer addresses expect virtual addresses.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Replace "available only" by the more common "only available".
* Tracing options depend on the configuration of the QEMU executable,
so clarify the help text for both options.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Allow overriding the location of Samba's smbd.
Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Uses the generic interface provided in "trace/control.h" in order to provide
a programmatic interface as well as command line and monitor controls.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
The "-trace events" argument can be used to provide a file with a list of trace
event names that will be enabled prior to starting execution, thus providing
early tracing.
This saves the user from manually toggling event states through the monitor
interface or whichever backend-specific interface.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
A default implementation for backend-specific routines is provided in
"trace/default.c", which backends can override by setting "trace_default=no" in
"configure".
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Provides a more hierarchical view of the variable domain.
Also adds the CONFIG_TRACE_* variables for all backends.
[Stefan added missing 'test' in stap if statement]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
I/O with no disk write cache presented to the guest.
This mode is useful when guests may not be sending flushes when
appropriate and therefore leave data at risk in case of power failure.
When cache=directsync is used, write operations are only completed to
the guest when data is safely on disk.
This new mode is like cache=writethrough but it bypasses the host page
cache.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch almost rewrites acpi_table_add() function
(but still leaves it using old get_param_value() interface).
The result is that it's now possible to specify whole table
(together with a header) in an external file, instead of just
data portion, with a new file= parameter, but at the same time
it's still possible to specify header fields as before.
Now with the checkpatch.pl formatting fixes, thanks to
Stefan Hajnoczi for suggestions, with changes from
Isaku Yamahata, and with my further refinements.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: John Baboval <john.baboval@virtualcomputer.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
[yamahata@valinux.co.jp: fix compile error, comment fallthrough]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Added options to let qemu transfer two configuration files to bios:
"bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command
-boot splash=P,splash-time=T
P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit
is ms. With these two options, if user invoke qemu with menu=on option, then
a splash picture would be showed in a given time. For example:
qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000
would make boot.bmp shown as a brand with 5 seconds in the booting up process.
This feature need the new seabios's support, which could be got from git.
Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All other boolean arguments accept on|off - except for slirp's restrict.
Fix that while still accepting the formerly allowed yes|y|no|n, but
reject everything else. This avoids accidentally allowing external
connections because syntax errors were so far interpreted as
'restrict=no'.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Superseded by -machine. Therefore, this patch removes -M from the help
list and pushes -machine at the same place in the output.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-machine somehow suggests that it selects the machine, but it doesn't.
Fix that before this command is set in stone.
Actually, -machine should supersede -M and allow to introduce arbitrary
per-machine options to the command line. That will change the internal
realization again, but we will be able to keep the user interface
stable.
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Thanks to agraf_, stefanha and Snader_LB for their IRC assistance.
Thanks to Markus Armbruster and Alexander Graf (again) for their
assistance with the second version of this patch. No patch is too
simple to test...
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Turn on SASL support by appending "sasl" to the spice arguments, which
requires that the client use SASL to authenticate with the spice. The
exact choice of authentication method used is controlled from the
system / user's SASL configuration file for the 'qemu' service. This
is typically found in /etc/sasl2/qemu.conf. If running QEMU as an
unprivileged user, an environment variable SASL_CONF_PATH can be used
to make it search alternate locations for the service config. While
some SASL auth methods can also provide data encryption (eg GSSAPI),
it is recommended that SASL always be combined with the 'tls' and
'x509' settings to enable use of SSL and server certificates. This
ensures a data encryption preventing compromise of authentication
credentials.
It requires support from spice 0.8.1.
[ kraxel: moved spell fix to separate commit ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some people want to be able disable spice's guest <-> client copy paste support
because of security considerations.
[ kraxel: drop old-version error message ]
Phillip Merensky reported that the special keys (e.g. Ctrl-Alt-f for full
screen) did not work correctly if -alt-grab is used.
BUG: 696530
Review of ui/sdl.c:sdl_refresh indicates that this is the intended behaviour,
so we should update the documentation to match the actual behaviour, as
suggested by Phillip in the bug report.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This option gives the ability to switch one "accelerator" like kvm, xen
or the default one tcg. We can specify more than one accelerator by
separate them by a colon. QEMU will try each one and use the first whose
works.
So,
./qemu -machine accel=xen:kvm:tcg
which would try Xen support first, then KVM and finally TCG if none of
the other works.
By default, QEMU will use TCG. But we can specify another default in the
global configuration file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
helpfull -> helpful
usefull -> useful
cotrol -> control
and a grammar fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
New option -display none. This option differs from -nographic by not
trying to take control of stdio etc. but instead behaves as if a
graphics display is enabled, except that it doesn't show one.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces a -display argument which consolidates the
setting of the display mode. Valid options are:
sdl/curses/default
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This option allow to disable adaptive behaviors in some encodings.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When MSI is off, each interrupt needs to be bounced through the io
thread when it's set/cleared, so vhost-net causes more context switches and
higher CPU utilization than userspace virtio which handles networking in
the same thread.
We'll need to fix this by adding level irq support in kvm irqfd,
for now disable vhost-net in these configurations.
Added a vhostforce flag to force vhost-net back on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With current sndbuf default value, a blocked
target guest can prevent another guest from
transmitting any packets. While current
sndbuf value (1M) is reported to help some
UDP based workloads, the default should
be safe (0).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to specify the host IP to send multicast packets from,
when using a multicast socket for networking. The option takes an IP
address and sets the IP_MULTICAST_IF socket option, which causes the
packets to use that IP's interface as an egress.
This is useful if the host machine has several interfaces with several
virtual networks across disparate interfaces.
Signed-off-by: Mike Ryan <mikeryan@ISI.EDU>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This is equivalent to SM_PASSTHROUGH security model.
The only exception is, failure of privilige operation like chown
are ignored. This makes a passthrough like security model usable
for people who runs kvm as non root
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Fix -snapshot deleting images on disk change
block: Use error codes from lower levels for error message
block: default to 0 minimal / optiomal I/O size
move 'unsafe' to end of caching modes in help
virtio-blk: Create exit function to unregister savevm
block migration: propagate return value when bdrv_write() returns < 0
ide/atapi: add support for GET EVENT STATUS NOTIFICATION
The lossy option can be used to enable lossy compression
methods like gradient or jpeg. This patch disable them by
default.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Libvirt parses qemu help output to determine qemu features. In particular
it probes for the following: "cache=writethrough|writeback|none". The
addition of the unsafe cache mode was inserted within this string, as
opposed to being added to the end, which impacted libvirt's probe.
Unbreak libvirt by keeping the existing cache modes intact and add
unsafe to the end.
This problem only manifests itself if a caching mode is explicitly
specified in the libvirt xml, in which case older syntax for caching is
passed to qemu, which it no longer understands.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5989020bc1 introduced a chardev
option to disable signals on stdio. Add the corresponding documentation.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The new option is:
-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag
In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using -snapshot we don't care about data integrity of the cow file
at all, so let's disable flushing there and squeeze out the last drop
of performance we could possibly get.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Usually the guest can tell the host to flush data to disk. In some cases we
don't want to flush though, but try to keep everything in cache.
So let's add a new cache value to -drive that allows us to set the cache
policy to most aggressive, disabling flushes. We call this mode "unsafe",
as guest data is not guaranteed to survive host crashes anymore.
This patch also adds a noop function for aio, so we can do nothing in AIO
fashion.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 6616b2ad reverted commit 40ea285c. Looks like a mismerge to
me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Currently the commandline to create a virtual-filesystem pass-through between
the guest and the host is as follows:
#qemu -fsdev fstype,id=ID,path=path/to/share \
-device virtio-9p-pci,fsdev=ID,mount_tag=tag \
This patch provides a syntactic short-cut to achieve the same as follows:
#qemu -virtfs fstype,path=path/to/share,mount_tag=tag
This will be internally expanded as:
#qemu -fsdev fstype,id=tag,path=path/to/share, \
-device virtio-9p-pci,fsdev=tag,mount_tag=tag \
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds vhost binary option to tap, to enable vhost net accelerator.
Default is off for now, we'll be able to make default on long term
when we know it's stable.
vhostfd option can be used by management, to pass in the fd. Assigning
vhostfd implies vhost=on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move target specific functions and RAM handling to arch_init.c.
Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.
Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Port qemu-kvm's -mem-path and -mem-prealloc options. These are useful
for backing guest memory with huge pages via hugetlbfs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: john cooper <john.cooper@redhat.com>
* Add line options to function index.
* Add description for -set (TODO).
* Add description for -global (TODO).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Similar to the qemu-img.c patch, but I also have to unescape remaining
% signs in qemu-options.hx.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
