The vhost_vdpa_one_time_request() branch in
vhost_vdpa_set_backend_cap() incorrectly sends down
ioctls on vhost_dev with non-zero index. This may
end up with multiple VHOST_SET_BACKEND_FEATURES
ioctl calls sent down on the vhost-vdpa fd that is
shared between all these vhost_dev's.
To fix it, send down ioctl only once via the first
vhost_dev with index 0. Toggle the polarity of the
vhost_vdpa_one_time_request() test should do the
trick.
Fixes: 4d191cfdc7 ("vhost-vdpa: classify one time request")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1651890498-24478-6-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_net_start() missed a corresponding stop_one() upon error from
vhost_set_vring_enable(). While at it, make the error handling for
err_start more robust. No real issue was found due to this though.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-5-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... such that no memory leaks on dangling net clients in case of
error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With MQ enabled vdpa device and non-MQ supporting guest e.g.
booting vdpa with mq=on over OVMF of single vqp, below assert
failure is seen:
../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed.
0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6
1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6
2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6
3 0x00007f8ce3fec252 in () at /lib64/libc.so.6
4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563
5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558
6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557
7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false)
at ../hw/virtio/virtio-pci.c:974
8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019
9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1)
at ../hw/net/vhost_net.c:361
10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289
11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370
12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945
13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292
14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...)
at ../softmmu/memory.c:492
15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554
16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...)
at ../softmmu/memory.c:1504
17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165
18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822
19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>)
at ../softmmu/physmem.c:2914
20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924
21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903
22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49
23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556
24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0
25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6
The cause for the assert failure is due to that the vhost_dev index
for the ctrl vq was not aligned with actual one in use by the guest.
Upon multiqueue feature negotiation in virtio_net_set_multiqueue(),
if guest doesn't support multiqueue, the guest vq layout would shrink
to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl).
This results in ctrl_vq taking a different vhost_dev group index than
the default. We can map vq to the correct vhost_dev group by checking
if MQ is supported by guest and successfully negotiated. Since the
MQ feature is only present along with CTRL_VQ, we ensure the index
2 is only meant for the control vq while MQ is not supported by guest.
Fixes: 22288fe ("virtio-net: vhost control virtqueue support")
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the control virtqueue feature is absent or not negotiated,
vhost_net_start() still tries to set up vhost_dev and install
vhost notifiers for the control virtqueue, which results in
erroneous ioctl calls with incorrect queue index sending down
to driver. Do that only when needed.
Fixes: 22288fe ("virtio-net: vhost control virtqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity issues several UNINIT warnings against amd_iommu.c [1]. This
patch fixes them by clearing evt before encoding. On top of it, this
patch changes the event log size to 16 bytes per IOMMU specification,
and fixes the event log entry format in amdvi_encode_event().
[1] CID 1487116/1487200/1487190/1487232/1487115/1487258
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Message-Id: <20220422055146.3312226-1-wei.huang2@amd.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy PIC (8259) cannot be supported for TDX guests since TDX module
doesn't allow directly interrupt injection. Using posted interrupts
for the PIC is not a viable option as the guest BIOS/kernel will not
do EOI for PIC IRQs, i.e. will leave the vIRR bit set.
Make PIC the property of common x86 machine type. Hence all x86
machines, including microvm, can disable it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-3-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both pc and microvm have pit property individually. Let's just make it
the property of common x86 base machine type.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20220310122811.807794-2-xiaoyao.li@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to 7.2.2 in [1] bit 27 is the last bit that can be part of the
bus number, this makes the ECAM max size equal to '1 << 28'. This patch
restores back this value into the PCIE_MMCFG_SIZE_MAX define (which was
changed in commit 58d5b22bbd ("ppc4xx: Add device models found in PPC440
core SoCs")).
[1] PCI Express® Base Specification Revision 5.0 Version 1.0
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220411221836.17699-3-frasse.iglesias@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to [1] address bits 27 - 20 are mapped to the bus number (the
TLPs bus number field is 8 bits). Below is the formula taken from Table
7-1 in [1].
"
Memory Address | PCI Express Configuration Space
A[(20+n-1):20] | Bus Number, 1 ≤ n ≤ 8
"
[1] PCI Express® Base Specification Revision 5.0 Version 1.0
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220411221836.17699-2-frasse.iglesias@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The specification for VHOST_USER_ADD/REM_MEM_REG messages is unclear
in several points, which has led to clients having incompatible
implementations. This changes the specification to be more explicit
about them:
* VHOST_USER_ADD_MEM_REG is not specified as receiving a file
descriptor, though it obviously does need to do so. All
implementations agree on this one, fix the specification.
* VHOST_USER_REM_MEM_REG is not specified as receiving a file
descriptor either, and it also has no reason to do so. rust-vmm does
not send file descriptors for removing a memory region (in agreement
with the specification), libvhost-user and QEMU do (which is a bug),
though libvhost-user doesn't actually make any use of it.
Change the specification so that for compatibility QEMU's behaviour
becomes legal, even if discouraged, but rust-vmm's behaviour becomes
the explicitly recommended mode of operation.
* VHOST_USER_ADD_MEM_REG doesn't have a documented return value, which
is the desired behaviour in the non-postcopy case. It also implemented
like this in QEMU and rust-vmm, though libvhost-user is buggy and
sometimes sends an unexpected reply. This will be fixed in a separate
patch.
However, in postcopy mode it does reply like VHOST_USER_SET_MEM_TABLE.
This behaviour is shared between libvhost-user and QEMU; rust-vmm
doesn't implement postcopy mode yet. Mention it explicitly in the
spec.
* The specification doesn't mention how VHOST_USER_REM_MEM_REG
identifies the memory region to be removed. Change it to describe the
existing behaviour of libvhost-user (guest address, user address and
size must match).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220407133657.155281-2-kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(This replaces the 28th April through 10th May sets)
Compared to that last set it just has the Alpine
uring check that Leo has added; although that's also
now fixed upstream in Alpine.
It contains:
TLS test fixes from Dan
Zerocopy migration feature from Leo
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Axhk
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220516a' of https://gitlab.com/dagrh/qemu into staging
Migration pull 2022-05-16
(This replaces the 28th April through 10th May sets)
Compared to that last set it just has the Alpine
uring check that Leo has added; although that's also
now fixed upstream in Alpine.
It contains:
TLS test fixes from Dan
Zerocopy migration feature from Leo
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmKCY80ACgkQBRYzHrxb
# /eeEEhAAoUogch7ifxFItr1EA0AU6Sgd3Dcn8wY9pm0NySVg7OcIpk1H++A3CgIh
# bubJSwRmpIxGw+5q5w5OvBukFCGYMlAK7J8k1tZmaqdKS8wD0ZwhpPyqTWd14Q/v
# xXSGOQfHMMvbBILiXPjSkfNw8yKJhZr+lW39uMz/kZRwZUmTcrdKAT3Q8PW+1DI9
# v3mNoFNXqtDlHcQ4nQ1TGk/RDO6oXDlTJwdnjoJT3Dopf8Jhl2etvZgVk2kOf4i5
# LmJbSVBr5FNOhJ6P4WL4OEQFOiXXquKdfuGTXIGGhkrW2WkPZulQwB6uO4Gv1wf2
# aj9bLDAFoPxFx2zYS6S/9L6rGeBMcTL9xHCfzyylM6YRjoscRdxXc67PClw71JUy
# regsoSQej0FpmsGx0uuAsDjCELleVIjeYzuQo5OYOP1BCg/5unLIrMgkyQw7COJI
# w+MIZq7IqvUTehU2yXpUGOqPkyDLBlib92dMRgqqG9r9UU7iL3BREbGW4ugW+GM2
# a9k8W9HjyDIIODsdXy1ugPHgjr/arHDAPgYosJMLvjTfdJDcIldAw6CbCcqhCDES
# UOjMVN9VS+716nY2AqvtEHxf47YwqmeRb+tg4SQ0dHLH5Pvfe2bk1sbZiiQpcelt
# Bd88yeBOpcmdzJVur2V4fEZXu5JB/qt/jeJeQa82hS3k93PWm/w=
# =Axhk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 07:46:37 AM PDT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
* tag 'pull-migration-20220516a' of https://gitlab.com/dagrh/qemu:
multifd: Implement zero copy write in multifd migration (multifd-zero-copy)
multifd: Send header packet without flags if zero-copy-send is enabled
multifd: multifd_send_sync_main now returns negative on error
migration: Add migrate_use_tls() helper
migration: Add zero-copy-send parameter for QMP/HMP for Linux
QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX
QIOChannel: Add flags on io_writev and introduce io_flush callback
meson.build: Fix docker-test-build@alpine when including linux/errqueue.h
tests: ensure migration status isn't reported as failed
tests: add multifd migration tests of TLS with x509 credentials
tests: add multifd migration tests of TLS with PSK credentials
tests: convert multifd migration tests to use common helper
tests: convert XBZRLE migration test to use common helper
tests: add migration tests of TLS with x509 credentials
tests: add migration tests of TLS with PSK credentials
tests: add more helper macros for creating TLS x509 certs
tests: fix encoding of IP addresses in x509 certs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The X cursor postion can be calculated based on the backporch and
interleave values. In the emulation we ignore the HP-UX settings for
backporch and use instead twice the size of the emulated cursor. With
those changes the X-position of the graphics cursor is now finally
working correctly on HP-UX 10 and HP-UX 11.
Based on coding in Xorg X11R6.6
Signed-off-by: Helge Deller <deller@gmx.de>
The misc_video and misc_ctrl registers control the visibility of the
screen. Start with the screen turned on, and hide or show the screen
based on the control registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Bit 0x80 in the cursor_cntrl register specifies if the cursor
should be visible. Prevent rendering the cursor if it's invisible.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Drop the hard-coded value of 1146 lines which seems to work with HP-UX
11, but not with HP-UX 10. Instead encode the screen height in byte 0 of
active_lines_low and byte 3 of misc_video as it's expected by the Xorg
X11 graphics driver.
This potentially allows for higher vertical screen resolutions than
1280x1024 with X11.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Convert the variable names of some registers to human-readable and
understandable names.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add the constant NGLE_MAX_SPRITE_SIZE which defines the currently
maximum supported cursor size.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
New features and fixes in SeaBIOS for hppa/parisc:
* STI firmware now contains additional fonts built-in, which
can be selected with qemu command-line options:
-fw_cfg opt/font,string=1 - a HP 8x16 font
-fw_cfg opt/font,string=2 - a HP 6x13 font
-fw_cfg opt/font,string=3 - a HP 10x20 font
-fw_cfg opt/font,string=4 - a Linux 16x32 font
* Fixed PS/2 keyboard emulation when running in graphical mode.
This allows to type boot commands in the firmware boot menu if
qemu was started with "-boot menu=on" (and no linux kernel was
given on the qemu command line).
* Fix firmware rendenzvous code to clear all pending external intrrupts
before entering the waiting loop.
Signed-off-by: Helge Deller <deller@gmx.de>
Implement zero copy send on nocomp_send_write(), by making use of QIOChannel
writev + flags & flush interface.
Change multifd_send_sync_main() so flush_zero_copy() can be called
after each iteration in order to make sure all dirty pages are sent before
a new iteration is started. It will also flush at the beginning and at the
end of migration.
Also make it return -1 if flush_zero_copy() fails, in order to cancel
the migration process, and avoid resuming the guest in the target host
without receiving all current RAM.
This will work fine on RAM migration because the RAM pages are not usually freed,
and there is no problem on changing the pages content between writev_zero_copy() and
the actual sending of the buffer, because this change will dirty the page and
cause it to be re-sent on a next iteration anyway.
A lot of locked memory may be needed in order to use multifd migration
with zero-copy enabled, so disabling the feature should be necessary for
low-privileged users trying to perform multifd migrations.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513062836.965425-9-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since d48c3a0445 ("multifd: Use a single writev on the send side"),
sending the header packet and the memory pages happens in the same
writev, which can potentially make the migration faster.
Using channel-socket as example, this works well with the default copying
mechanism of sendmsg(), but with zero-copy-send=true, it will cause
the migration to often break.
This happens because the header packet buffer gets reused quite often,
and there is a high chance that by the time the MSG_ZEROCOPY mechanism get
to send the buffer, it has already changed, sending the wrong data and
causing the migration to abort.
It means that, as it is, the buffer for the header packet is not suitable
for sending with MSG_ZEROCOPY.
In order to enable zero copy for multifd, send the header packet on an
individual write(), without any flags, and the remanining pages with a
writev(), as it was happening before. This only changes how a migration
with zero-copy-send=true works, not changing any current behavior for
migrations with zero-copy-send=false.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513062836.965425-8-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Even though multifd_send_sync_main() currently emits error_reports, it's
callers don't really check it before continuing.
Change multifd_send_sync_main() to return -1 on error and 0 on success.
Also change all it's callers to make use of this change and possibly fail
earlier.
(This change is important to next patch on multifd zero copy
implementation, to make it sure an error in zero-copy flush does not go
unnoticed.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220513062836.965425-7-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A lot of places check parameters.tls_creds in order to evaluate if TLS is
in use, and sometimes call migrate_get_current() just for that test.
Add new helper function migrate_use_tls() in order to simplify testing
for TLS usage.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513062836.965425-6-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add property that allows zero-copy migration of memory pages
on the sending side, and also includes a helper function
migrate_use_zero_copy_send() to check if it's enabled.
No code is introduced to actually do the migration, but it allow
future implementations to enable/disable this feature.
On non-Linux builds this parameter is compiled-out.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220513062836.965425-5-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For CONFIG_LINUX, implement the new zero copy flag and the optional callback
io_flush on QIOChannelSocket, but enables it only when MSG_ZEROCOPY
feature is available in the host kernel, which is checked on
qio_channel_socket_connect_sync()
qio_channel_socket_flush() was implemented by counting how many times
sendmsg(...,MSG_ZEROCOPY) was successfully called, and then reading the
socket's error queue, in order to find how many of them finished sending.
Flush will loop until those counters are the same, or until some error occurs.
Notes on using writev() with QIO_CHANNEL_WRITE_FLAG_ZERO_COPY:
1: Buffer
- As MSG_ZEROCOPY tells the kernel to use the same user buffer to avoid copying,
some caution is necessary to avoid overwriting any buffer before it's sent.
If something like this happen, a newer version of the buffer may be sent instead.
- If this is a problem, it's recommended to call qio_channel_flush() before freeing
or re-using the buffer.
2: Locked memory
- When using MSG_ZERCOCOPY, the buffer memory will be locked after queued, and
unlocked after it's sent.
- Depending on the size of each buffer, and how often it's sent, it may require
a larger amount of locked memory than usually available to non-root user.
- If the required amount of locked memory is not available, writev_zero_copy
will return an error, which can abort an operation like migration,
- Because of this, when an user code wants to add zero copy as a feature, it
requires a mechanism to disable it, so it can still be accessible to less
privileged users.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-4-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add flags to io_writev and introduce io_flush as optional callback to
QIOChannelClass, allowing the implementation of zero copy writes by
subclasses.
How to use them:
- Write data using qio_channel_writev*(...,QIO_CHANNEL_WRITE_FLAG_ZERO_COPY),
- Wait write completion with qio_channel_flush().
Notes:
As some zero copy write implementations work asynchronously, it's
recommended to keep the write buffer untouched until the return of
qio_channel_flush(), to avoid the risk of sending an updated buffer
instead of the buffer state during write.
As io_flush callback is optional, if a subclass does not implement it, then:
- io_flush will return 0 without changing anything.
Also, some functions like qio_channel_writev_full_all() were adapted to
receive a flag parameter. That allows shared code between zero copy and
non-zero copy writev, and also an easier implementation on new flags.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220513062836.965425-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A build error happens in alpine CI when linux/errqueue.h is included
in io/channel-socket.c, due to redefining of 'struct __kernel_timespec':
===
ninja: job failed: [...]
In file included from /usr/include/linux/errqueue.h:6,
from ../io/channel-socket.c:29:
/usr/include/linux/time_types.h:7:8: error: redefinition of 'struct __kernel_timespec'
7 | struct __kernel_timespec {
| ^~~~~~~~~~~~~~~~~
In file included from /usr/include/liburing.h:19,
from /builds/user/qemu/include/block/aio.h:18,
from /builds/user/qemu/include/io/channel.h:26,
from /builds/user/qemu/include/io/channel-socket.h:24,
from ../io/channel-socket.c:24:
/usr/include/liburing/compat.h:9:8: note: originally defined here
9 | struct __kernel_timespec {
| ^~~~~~~~~~~~~~~~~
ninja: subcommand failed
===
As above error message suggests, 'struct __kernel_timespec' was already
defined by liburing/compat.h.
Fix alpine CI by adding test to disable liburing in configure step if a
redefinition happens between linux/errqueue.h and liburing/compat.h.
[dgilbert: This has been fixed in Alpine issue 13813 and liburing]
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20220513062836.965425-2-leobras@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Various methods in the migration test call 'query_migrate' to fetch the
current status and then access a particular field. Almost all of these
cases expect the migration to be in a non-failed state. In the case of
'wait_for_migration_pass' in particular, if the status is 'failed' then
it will get into an infinite loop. By validating that the status is
not 'failed' the test suite will assert rather than hang when getting
into an unexpected state.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with x509 certificates. There
are quite a few different scenarios that matter in relation to
hostname validation, but we skip a couple as we can assume that
the non-multifd coverage applies to some extent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-9-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-8-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the multifd migration test logic is common with the rest of the
precopy tests, so it can use the helper without difficulty. The only
exception of the multifd cancellation test which tries to run multiple
migrations in a row.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the XBZRLE migration test logic is common with the rest of the
precopy tests, so it can use the helper with just one small tweak.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle migration success and failure
scenarios when using TLS with x509 certificates. There are quite a few
different scenarios that matter in relation to hostname validation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Manual merge due to ifdef change in 3
This validates that we correctly handle migration success and failure
scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These macros are more suited to the general consumers of certs in the
test suite, where we don't need to exercise every single possible
permutation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to encode just the address bytes, not the whole struct sockaddr
data. Add a test case to validate that we're matching on SAN IP
addresses correctly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-2-berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At a couple of hundred bytes per notifier allocating one for every
potential queue is very wasteful as most devices only have a few
queues. Instead of having this handled statically dynamically assign
them and track in a GPtrArray.
[AJB: it's hard to trigger the vhost notifiers code, I assume as it
requires a KVM guest with appropriate backend]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.
Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.
Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While trying to get my head around the nest of interactions for vhost
devices I though I could start by documenting the key API functions.
This patch documents the main API hooks for creating and starting a
vhost device as well as how the configuration changes are handled.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220321153037.3622127-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While writing my own VirtIO devices I've gotten confused with how
things are structured and what sort of shared infrastructure there is.
If we can document how everything is supposed to work we can then
maybe start cleaning up inconsistencies in the code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220309164929.19395-1-alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-10-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is useful for more human readable debug messages in vhost-user
programs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-9-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make the language about feature negotiation explicitly clear about the
handling of the VHOST_USER_F_PROTOCOL_FEATURES feature bit. Try and
avoid the sort of bug introduced in vhost.rs REPLY_ACK processing:
https://github.com/rust-vmm/vhost/pull/24
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Jiang Liu <gerry@linux.alibaba.com>
Message-Id: <20210226111619.21178-1-alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This matches the nomenclature that is generally used. Also commonly used
is client/server, but it is not as clear because sometimes the front-end
exposes a passive (server) socket that the back-end connects to.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210226143413.188046-4-pbonzini@redhat.com>
Message-Id: <20220321153037.3622127-7-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This section is using the word "back-end" to refer to the
"slave's back-end", and talking about the "client" for
what the rest of the document calls the "slave".
Rework it to free the use of the term "back-end", which in
the next patch will replace "slave".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210226143413.188046-3-pbonzini@redhat.com>
Message-Id: <20220321153037.3622127-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is not necessary to mention which side is sending/receiving
each payload; it is more interesting to say which is the request
and which is the reply. This also matches what vhost-user-gpu.rst
already does.
While at it, ensure that all messages list both the request and
the reply payload.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210226143413.188046-2-pbonzini@redhat.com>
Message-Id: <20220321153037.3622127-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These are useful when trying to debug the initial vhost-user
negotiation, especially when it hard to get logging from the low level
library on the other side.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
