We don't really need to be told that %g are general register, etc.
Issue a trailing newline to separate blocks.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This avoids a NULL-deref upon strdup failure.
Also update matching free to g_free.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
fcmp{s,d,q} instructions are supposed to ignore quiet NaN (contrary to
the fcmpe{s,d,q} instructions), but the current code is wrongly setting
the NV exception in that case. Moreover the current code is duplicated:
first the arguments are checked for NaN to generate an exception, and
later in case the comparison is unordered (which can only happens if one
of the argument is a NaN), the same check is done to generate an
exception.
Fix that by calling clear_float_exceptions() followed by
check_ieee_exceptions() as for the other floating point instructions.
Use the _compare_quiet functions for fcmp{s,d,q} and the _compare ones
for fcmpe{s,d,q}. Simplify the flag setting by not clearing a flag that
is set the line just below.
This fix allows the math glibc testsuite to pass.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In commit 1bba0dc932 cpu_reset()
was renamed to cpu_state_reset(), to allow introducing a new cpu_reset()
that would operate on QOM objects.
All callers have been updated except for one in target-mips, so drop all
implementations except for the one in target-mips and move the
declaration there until MIPSCPU reset can be fully QOM'ified.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris)
Acked-by: Alexander Graf <agraf@suse.de> (for ppc)
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Make include paths for cpu-qom.h consistent, so that SPARCCPU can be
used in cpu.h.
Turn cpu_init macro into a static inline function returning
CPUSPARCState for backwards compatibility.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Fix UltraSPARC/JPS1/UA2007 VIS block load instructions broken in
30038fd818.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: trimmed unwanted part of patch]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to UltraSPARC - IIi User's manual:
14.1.11 Address Masking (Impdep #125)
When PSTATE.AM=1, the CALL, JMPL, and RDPC instructions and all traps
transmit zero in the high-order 32-bits of the PC to their specified
destination registers.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Embed CPUSPARCState as first member of SPARCCPU.
Drop cpu_sparc_close() in favor of object_delete() and a finalizer.
Let cpu_state_reset() call cpu_reset().
Make TYPE_SPARC_CPU non-abstract for now.
Distinguish between "sparc-cpu" and "sparc64-cpu".
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Align QOM'ified targets, with a view to simplify Makefile.target.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mask incoming page address early so that resolved addresses
are page aligned. Remove further address masking.
Tested-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
helper_raise_exception does not return, nor does do_unaligned_access.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adjust generation of load and store templates so that the functions
take a parameter for CPUState instead of relying on global env.
Remove wrappers. Move remaining memory helpers to ldst_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make memory access helpers take a parameter for CPUState instead
of relying on global env. Introduce wrappers for load and store ops.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Generate correct trap for external interrupts. Map PCI and ISA IRQs to
RIC/UltraSPARC-IIi interrupt vectors.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Not strictly accurate for Sparc64 but avoid confusing Valgrind.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUSPARCState/g" target-sparc/*.[hc]
sed -i "s/#define CPUSPARCState/#define CPUState/" target-sparc/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 793a137a41 (target-sparc:
Implement BMASK/BSHUFFLE.) introduced a stray usage of softfloat uint64
type.
Use uint64_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch replace the previous implementation with this simplified and
more complete version (no shutdown when psret == 1).
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not
implemeneted at all. However, this is a very simple operation
so we're better off doing this inline.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reduces the size of the individual translation blocks, since
we only emit a single call for each FOP rather than three. In
addition, clear_float_exceptions expands inline to a single byte store.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Begin using i64 quantities to manipulate double-precision values.
On a 64-bit host this will, for the moment, generate less efficient
code; on a 32-bit host code quality should be largely unchanged.
Code quality for 64-bit will be adjusted with a subsequent patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Load, store, and "create destination". This version attempts to
change the behaviour of the translator as little as possible. We
previously used cpu_tmp32 as the temporary destination, and we
continue to use that. This will eventually allow a change in
representation of the fprs.
Change the name of the cpu_fpr array to make certain that all
instances are converted.
Signed-off-by: Richard Henderson <rth@twiddle.net>
