Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-21-philmd@linaro.org>
All commands switching from TRANSFER state to (sending)DATA
do the same: send stream of data on the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_sendingdata() on the I/O line setup the data to
be transferred,
- sd_generic_read_byte() on the DAT lines to fetch the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <4c9f7f51-83ee-421a-8690-9af2e80b134b@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240628070216.92609-18-philmd@linaro.org>
Extract sd_blk_len() helper, use definitions instead
of magic values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-15-philmd@linaro.org>
Keep direct reference to SDProto in SDState,
remove then unnecessary sd_proto().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-14-philmd@linaro.org>
Card entering sd_inactive_state powers off, and won't respond
anymore. Handle that once when entering sd_do_command().
Remove condition always true in sd_cmd_GO_IDLE_STATE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-12-philmd@linaro.org>
SDCardStates enum values are specified, so assign them
correspondingly. It will be useful later when we add
states from later specs, which might not be continuous.
See CURRENT_STATE bits in section 4.10.1 "Card Status".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-11-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write"
and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-9-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol) and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-8-philmd@linaro.org>
SWITCH_FUNCTION is only allowed in TRANSFER state
(See 4.8 "Card State Transition Table).
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-13-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-6-philmd@linaro.org>
Useful to detect out of bound accesses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-5-philmd@linaro.org>
The command is selected on the I/O lines, and further
processing might be done on the DAT lines via the
sd_read_byte() and sd_write_byte() handlers. Since
these methods can't distinct between normal and APP
commands, keep the name of the current command in
the SDState and use it in the DAT handlers. This
fixes a bug that all normal commands were displayed
as APP commands.
Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-4-philmd@linaro.org>
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
boot-mode property sets user values into BOOT_MODE register, on hardware
these are derived from board switches.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-2-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A malicious or buggy guest may generated buffered ioreqs faster than
QEMU can process them in handle_buffered_iopage(). The result is a
livelock - QEMU continuously processes ioreqs on the main thread without
iterating through the main loop which prevents handling other events,
processing timers, etc. Without QEMU handling other events, it often
results in the guest becoming unsable and makes it difficult to stop the
source of buffered ioreqs.
To avoid this, if we process a full page of buffered ioreqs, stop and
reschedule an immediate timer to continue processing them. This lets
QEMU go back to the main loop and catch up.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240404140833.1557953-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
When running in a stubdomain, the config space access via sysfs needs to
use BDF as seen inside stubdomain (connected via xen-pcifront), which is
different from the real BDF. For other purposes (hypercall parameters
etc), the real BDF needs to be used.
Get the in-stubdomain BDF by looking up relevant PV PCI xenstore
entries.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <35049e99da634a74578a1ff2cb3ae4cc436ede33.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().
Do it directly instead of bridging with an iommu mr pointer.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace stubbed OTP memory region with the new OTP device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OTP device registers are currently stubbed. For now, the device
houses the OTP rows which will be accessed directly by other peripherals.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should call inflateEnd() like on success path to cleanup state in s
variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This struct has been unused since
Commit f932093ae1 ("hw/arm/bcm2836: Split out common part of BCM283X
classes")
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since a4c2735f35 (cpu: move Qemu[Thread|Cond] setup into common code,
2024-05-30) these fields are now allocated at cpu_common_initfn(). So
let's make sure we also free them at cpu_common_finalize().
Furthermore, the code also frees these on round robin, but we missed
'halt_cond'.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch fixes two points reported in coverity scan report [1]. Check
the MMIO access address with (addr + size), not just with the start offset
addr to make sure that the requested memory access not to exceed the
actual register region. We also updated (uint8_t *) to (uint32_t *) to
represent we are accessing the MMIO registers by dword-sized only.
[1] https://lore.kernel.org/qemu-devel/CAFEAcA82L-WZnHMW0X+Dr40bHM-EVq2ZH4DG4pdqop4xxDP2Og@mail.gmail.com/
Cc: Jeuk Kim <jeuk20.kim@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240623024555.78697-1-minwoo.im.dev@gmail.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
RISC-V virt is currently missing default type for block devices. Without
this being set, proper backend is not created when option like -cdrom
is used. So, make the virt board's default block device type be
IF_VIRTIO similar to other architectures.
We also need to set no_cdrom to avoid getting a default cdrom device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240620064718.275427-1-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] requires a 'msi-cell' property. Add one
and set it zero.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240531202759.911601-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,imsics [1] predicts a 'qemu,imsics' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Linux DT docs for imsic [1] predicts an 'interrupt-controller@addr'
node, not 'imsic@addr', given this node inherits the
'interrupt-controller' node.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: 28d8c28120 ("hw/riscv: virt: Add optional AIA IMSIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'riscv,delegation' property.
Not 'riscv,delegate'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The DT docs for riscv,aplic [1] predicts a 'qemu,aplic' enum in the
'compatible' property.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The correct name of the aplic controller node, as per Linux kernel DT
docs [1], is 'interrupt-controller@addr'.
[1] Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
Reported-by: Conor Dooley <conor@kernel.org>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll change the aplic DT nodename in the next patch and the name is
hardcoded in 2 different functions. Create a helper to change a single
place later.
While we're at it, in create_fdt_socket_aplic(), move 'aplic_name'
inside the conditional to avoid allocating a string that won't be used
when socket == NULL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We need #address-cells properties in all interrupt controllers that are
referred by an interrupt-map [1]. For the RISC-V machine, both PLIC and
APLIC controllers must have this property.
PLIC already sets it in create_fdt_socket_plic(). Set the property for
APLIC in create_fdt_one_aplic().
[1] https://lore.kernel.org/linux-arm-kernel/CAL_JsqJE15D-xXxmELsmuD+JQHZzxGzdXvikChn6KFWqk6NzPw@mail.gmail.com/
Suggested-by: Anup Patel <apatel@ventanamicro.com>
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240531202759.911601-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
One fix and various cleanups for the SD card model.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZ5cRUACgkQ4+MsLN6t
wN59Qw//cUdjD287pB5Ml5aQqr9sOTyVnHUceZtz7AOZ5w8RM2tlPDgOImeLOvU6
OV7qfWvNaUxtQxhfh5jpe8Pj4eHBtRQzA6a1AWToEvnN4189QWHZpqf5TUa4AlFS
uAk7k2TkoNv9zbNKca0bP3L1x6sT9l0VPZBLaLbgdXDIX2ycD0r3NVQxXb/bJRgM
6pFRcLCF/isKzLQDwqnTa11hB/JDTvOU7xnY0kazGRvyWjbSvE2sOJzLNJXHkW0I
/FNfRbOKJo2t+47Z5qSXUFFLeIEBTy7VqNBsOQ6sMIgrWzbOSrtBcuxKp0p9NCGH
fdZHlDVRnNGXewUya4RjbmXiCNuGL4zJ82b2BaQZVd5ZwU2opIr8xO96WCojQ4dZ
+Dq3uv7su3PUVOh95i38Eo93OG9jXFx642XD4q2uKu5j70IoGXAkIoLUcFkZZdGS
9rCsaNUHyHJrN6nXf3Cekvkqxz36p6QXaUF9I1vB0JF6CrexMD35sBUK+RE9k4uW
LnqL7ZwQDGDGVl3kPS/VCXv1mMim4aRLSEIveq7Ui6dKzaaJMIIodZ8CFMuyTTsD
cGE+Cd053nf6SzX3+kEZftNdjtJ906O8xIAw+RNdARYx003l4kUxgsPDk7ELyzIP
Tb+VlZl2P+ROJmeWvRMTW7ZQ49M9IEMrg8zlGF4hLCxB1JndeOA=
=O5er
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240624' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
One fix and various cleanups for the SD card model.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmZ5cRUACgkQ4+MsLN6t
# wN59Qw//cUdjD287pB5Ml5aQqr9sOTyVnHUceZtz7AOZ5w8RM2tlPDgOImeLOvU6
# OV7qfWvNaUxtQxhfh5jpe8Pj4eHBtRQzA6a1AWToEvnN4189QWHZpqf5TUa4AlFS
# uAk7k2TkoNv9zbNKca0bP3L1x6sT9l0VPZBLaLbgdXDIX2ycD0r3NVQxXb/bJRgM
# 6pFRcLCF/isKzLQDwqnTa11hB/JDTvOU7xnY0kazGRvyWjbSvE2sOJzLNJXHkW0I
# /FNfRbOKJo2t+47Z5qSXUFFLeIEBTy7VqNBsOQ6sMIgrWzbOSrtBcuxKp0p9NCGH
# fdZHlDVRnNGXewUya4RjbmXiCNuGL4zJ82b2BaQZVd5ZwU2opIr8xO96WCojQ4dZ
# +Dq3uv7su3PUVOh95i38Eo93OG9jXFx642XD4q2uKu5j70IoGXAkIoLUcFkZZdGS
# 9rCsaNUHyHJrN6nXf3Cekvkqxz36p6QXaUF9I1vB0JF6CrexMD35sBUK+RE9k4uW
# LnqL7ZwQDGDGVl3kPS/VCXv1mMim4aRLSEIveq7Ui6dKzaaJMIIodZ8CFMuyTTsD
# cGE+Cd053nf6SzX3+kEZftNdjtJ906O8xIAw+RNdARYx003l4kUxgsPDk7ELyzIP
# Tb+VlZl2P+ROJmeWvRMTW7ZQ49M9IEMrg8zlGF4hLCxB1JndeOA=
# =O5er
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 06:13:57 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240624' of https://github.com/philmd/qemu:
hw/sd/sdcard: Add comments around registers and commands
hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros
hw/sd/sdcard: Add sd_invalid_mode_for_cmd to report invalid mode switch
hw/sd/sdcard: Only call sd_req_get_address() where address is used
hw/sd/sdcard: Factor sd_req_get_address() method out
hw/sd/sdcard: Only call sd_req_get_rca() where RCA is used
hw/sd/sdcard: Factor sd_req_get_rca() method out
hw/sd/sdcard: Have cmd_valid_while_locked() return a boolean value
hw/sd/sdcard: Trace update of block count (CMD23)
hw/sd/sdcard: Remove explicit entries for illegal commands
hw/sd/sdcard: Remove ACMD6 handler for SPI mode
hw/sd/sdcard: Use Load/Store API to fill some CID/CSD registers
hw/sd/sdcard: Use registerfield CSR::CURRENT_STATE definition
hw/sd/sdcard: Use HWBLOCK_SHIFT definition instead of magic values
hw/sd/sdcard: Fix typo in SEND_OP_COND command name
hw/sd/sdcard: Rewrite sd_cmd_ALL_SEND_CID using switch case (CMD2)
hw/sd/sdcard: Correct code indentation
hw/sd/sdcard: Avoid OOB in sd_read_byte() during unexpected CMD switch
bswap: Add st24_be_p() to store 24 bits in big-endian order
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
vfio_container_destroy() clears the resources allocated
VFIOContainerBase object. Now that VFIOContainerBase is a QOM object,
add an instance_finalize() handler to do the cleanup. It will be
called through object_unref().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Just as we did for the VFIOContainerBase object, introduce an
instance_init() handler for the legacy VFIOContainer object and do the
specific initialization there.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
It's now empty.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Instead, use VFIO_IOMMU_GET_CLASS() to get the class pointer.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This allows us to move the initialization code from vfio_container_init(),
which we will soon remove.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Instead of allocating the container struct, create a QOM object of the
appropriate type.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOContainerBase was made a QOM interface because we believed that a
QOM object would expose all the IOMMU backends to the QEMU machine and
human interface. This only applies to user creatable devices or objects.
Change the VFIOContainerBase nature from interface to object and make
the necessary adjustments in the VFIO_IOMMU hierarchy.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since the QEMU struct type representing the VFIO container is deduced
from the IOMMU type exposed by the host, this type should be well
defined *before* creating the container struct. This will be necessary
to instantiate a QOM object of the correct type in future changes.
Rework vfio_set_iommu() to extract the part doing the container
initialization and move it under vfio_create_container().
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This routine allocates the QEMU struct type representing the VFIO
container. It is minimal currently and future changes will do more
initialization.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rework vfio_get_iommu_class() to return a literal class name instead
of a class object. We will need this name to instantiate the object
later on. Since the default case asserts, remove the error report as
QEMU will simply abort before.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The 'container' pointer has no other use than its 'fd' attribute.
Simplify the prototype to ease future changes.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Assign the base container VFIOAddressSpace 'space' pointer in
vfio_address_space_insert(). The ultimate goal is to remove
vfio_container_init() and instead rely on an .instance_init() handler
to perfom the initialization of VFIOContainerBase.
To be noted that vfio_connect_container() will assign the 'space'
pointer later in the execution flow. This should not have any
consequence.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
It prepares ground for a future change initializing the 'space' pointer
of VFIOContainerBase. The goal is to replace vfio_container_init() by
an .instance_init() handler when VFIOContainerBase is QOMified.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Extract vIOMMU code from vfio_sync_dirty_bitmap() to a new function and
restructure the code.
This is done in preparation for optimizing vIOMMU device dirty page
tracking. No functional changes intended.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[ clg: - Rebased on upstream
- Fixed typo in commit log ]
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Separate the changes that update the ranges from the listener, to
make it reusable in preparation to expand its use to vIOMMU support.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
[ clg: - Rebased on upstream
- Introduced vfio_dirty_tracking_update_range()
- Fixed typ in commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since vfio_devices_dma_logging_start() takes an 'Error **' argument,
best practices suggest to return a bool. See the api/error.h Rules
section. It will simplify potential changes coming after.
vfio_container_set_dirty_page_tracking() could be modified in the same
way but the errno value can be saved in the migration stream when
called from vfio_listener_log_global_stop().
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
As we have just removed the only implementation of
iommu_set_iova_ranges IOMMU MR callback in the virtio-iommu,
let's remove the call to the memory wrapper. Usable IOVA ranges
are now conveyed through the PCIIOMMUOps in VFIO-PCI.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Now that we use PCIIOMMUOps to convey information about usable IOVA
ranges we do not to implement the iommu_set_iova_ranges IOMMU MR
callback.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Compute the host reserved regions in virtio_iommu_set_iommu_device().
The usable IOVA regions are retrieved from the HostIOMMUDevice.
The virtio_iommu_set_host_iova_ranges() helper turns usable regions
into complementary reserved regions while testing the inclusion
into existing ones. virtio_iommu_set_host_iova_ranges() reuse the
implementation of virtio_iommu_set_iova_ranges() which will be
removed in subsequent patches. rebuild_resv_regions() is just moved.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Store the aliased bus and devfn in the HostIOMMUDevice.
This will be useful to handle info that are iommu group
specific and not device specific (such as reserved
iova ranges).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new HostIOMMUDevice callback that allows to
retrieve the usable IOVA ranges.
Implement this callback in the legacy VFIO and IOMMUFD VFIO
host iommu devices. This relies on the VFIODevice agent's
base container iova_ranges resource.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement PCIIOMMUOPs [set|unset]_iommu_device() callbacks.
In set(), the HostIOMMUDevice handle is stored in a hash
table indexed by PCI BDF. The object will allow to retrieve
information related to the physical IOMMU.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Store the agent device (VFIO or VDPA) in the host IOMMU device.
This will allow easy access to some of its resources.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
If check fails, host device (either VFIO or VDPA device) is not
compatible with current vIOMMU config and should not be passed to
guest.
Only aw_bits is checked for now, we don't care about other caps
before scalable modern mode is introduced.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement [set|unset]_iommu_device() callbacks in Intel vIOMMU.
In set call, we take a reference of HostIOMMUDevice and store it
in hash table indexed by PCI BDF.
Note this BDF index is device's real BDF not the aliased one which
is different from the index of VTDAddressSpace. There can be multiple
assigned devices under same virtual iommu group and share same
VTDAddressSpace, but each has its own HostIOMMUDevice.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Extract cap/ecap initialization in vtd_cap_init() to make code
cleaner.
No functional change intended.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
With HostIOMMUDevice passed, vIOMMU can check compatibility with host
IOMMU, call into IOMMUFD specific methods, etc.
Originally-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
pci_device_[set|unset]_iommu_device() call pci_device_get_iommu_bus_devfn()
to get iommu_bus->iommu_ops and call [set|unset]_iommu_device callback to
set/unset HostIOMMUDevice for a given PCI device.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Extract out pci_device_get_iommu_bus_devfn() from
pci_device_iommu_address_space() to facilitate
implementation of pci_device_[set|unset]_iommu_device()
in following patch.
No functional change intended.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Create host IOMMU device instance in vfio_attach_device() and call
.realize() to initialize it further.
Introuduce attribute VFIOIOMMUClass::hiod_typename and initialize
it based on VFIO backend type. It will facilitate HostIOMMUDevice
creation in vfio_attach_device().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
It calls iommufd_backend_get_device_info() to get host IOMMU
related information and translate it into HostIOMMUDeviceCaps
for query with .get_cap().
For aw_bits, use the same way as legacy backend by calling
vfio_device_get_aw_bits() which is common for different vendor
IOMMU.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The realize function populates the capabilities. For now only the
aw_bits caps is computed for legacy backend.
Introduce a helper function vfio_device_get_aw_bits() which calls
range_get_last_bit() to get host aw_bits and package it in
HostIOMMUDeviceCaps for query with .get_cap(). This helper will
also be used by iommufd backend.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_HOST_IOMMU_DEVICE_IOMMUFD represents a host IOMMU device under
iommufd backend. It is abstract, because it is going to be derived
into VFIO or VDPA type'd device.
It will have its own .get_cap() implementation.
TYPE_HOST_IOMMU_DEVICE_IOMMUFD_VFIO is a sub-class of
TYPE_HOST_IOMMU_DEVICE_IOMMUFD, represents a VFIO type'd host IOMMU
device under iommufd backend. It will be created during VFIO device
attaching and passed to vIOMMU.
It will have its own .realize() implementation.
Opportunistically, add missed header to include/sysemu/iommufd.h.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_HOST_IOMMU_DEVICE_LEGACY_VFIO represents a host IOMMU device under
VFIO legacy container backend.
It will have its own realize implementation.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-21-philmd@linaro.org>
These macros only save 3 chars and make the code harder
to maintain, simply remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-20-philmd@linaro.org>
Having the mode switch displayed help to track incomplete
command implementations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-19-philmd@linaro.org>
It will be useful later to assert only ADTC commands
(Addressed point-to-point Data Transfer Commands, defined
as the 'sd_adtc' enum) extract the address value from the
command argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-18-philmd@linaro.org>
Extract sd_cmd_get_address() so we can re-use it
in various SDProto handlers. Use CARD_CAPACITY and
HWBLOCK_SHIFT definitions instead of magic values.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-17-philmd@linaro.org>
It will be useful later to assert only AC commands
(Addressed point-to-point Commands, defined as the
'sd_ac' enum) extract the RCA value from the command
argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-16-philmd@linaro.org>
Extract sd_req_get_rca() so we can re-use it in various
SDProto handlers. Return a 16-bit value since RCA is 16-bit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-15-philmd@linaro.org>
NULL handler is already handled as illegal, no need to
duplicate (that keeps this array simpler to maintain).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-9-philmd@linaro.org>
There is no ACMD6 command in SPI mode, remove the pointless
handler introduced in commit 946897ce18 ("sdcard: handles
more commands in SPI mode"). Keep sd_cmd_unimplemented()
since we'll reuse it later.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-8-philmd@linaro.org>
The ld/st API helps noticing CID or CSD bytes refer
to the same field. Multi-bytes fields are stored MSB
first in CID / CSD.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-7-philmd@linaro.org>
Use registerfield-generated definitions to update card_status.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-5-philmd@linaro.org>
There is no SEND_OP_CMD but SEND_OP_COND.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-4-philmd@linaro.org>
Keep this handler style in sync with other handlers by
using a switch() case, which might become handy to
handle other states.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-3-philmd@linaro.org>
Fix mis-alignment from commits 793d04f495 and 6380cd2052
("Add sd_cmd_SEND_TUNING_BLOCK" and "Add sd_cmd_SET_BLOCK_COUNT").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-2-philmd@linaro.org>
The oldest model that IBM still supports is the z13. Considering
that each generation can "emulate" the previous two generations
in hardware (via the "IBC" feature of the CPUs), this means that
everything that is older than z114/196 is not an officially supported
CPU model anymore. The Linux kernel still support the z10, so if
we also take this into account, everything older than that can
definitely be considered as a legacy CPU model.
For downstream builds of QEMU, we would like to be able to disable
these legacy CPUs in the build. Thus add a CONFIG switch that can be
used to disable them (and old machine types that use them by default).
Message-Id: <20240614125019.588928-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vfio_ccw_register_irq_notifier() and vfio_ap_register_irq_notifier()
errors are currently reported using error_report_err(). Since they are
not considered as failing conditions, using warn_report_err() is more
appropriate.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-8-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When get name failed, we should call unrealize() so that
vfio_ccw_realize() is self contained.
Fixes: 909a6254ed ("vfio/ccw: Make vfio cdev pre-openable by passing a file handle")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-7-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The local error variable is kept for vfio_ccw_register_irq_notifier()
because it is not considered as a failing condition. We will change
how error reporting is done in following changes.
Remove the error_propagate() call.
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-6-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the realize() handler of S390CCWDeviceClass takes an 'Error **'
argument, best practices suggest to return a bool. See the api/error.h
Rules section. While at it, modify the call in vfio_ccw_realize().
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-5-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
