Improve readability of audio out.voices test:
If 1 is logged and set after positive test, 1 should be tested.
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221012114925.5084-3-hk@zapateado.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This has been tested under msys2 & windows 11. I haven't tried to make
it work with other environments yet, but that should be enough to
validate the channel-command implementation anyway.
Here are the changes:
- drop tests/ from fifo/pipe path, to avoid directory issues
- use g_find_program() to lookup the socat executable (otherwise we
would need to change ChanneCommand to use G_SPAWN_SEARCH_PATH, and deal
with missing socat differently)
- skip the "echo" test when socat is missing as well
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-7-marcandre.lureau@redhat.com>
The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.
Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>
Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.
As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>
The /io/channel/command/echo tests run the reader side and the writer
side with the same underlying command channel. Setting the blocking mode
of the fd/handles while the other end is already reading/writing may
create issues (deadlock in win32 when earlier attempt of this series
were using SetNamedPipeHandleState). Let's just do it before spawning
the threads to avoid further concurrency issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-4-marcandre.lureau@redhat.com>
According to msdn documentation and Linux man pages, send() should try
to send as much as possible in blocking mode, while recv() may return
earlier with a smaller available amount, we should try to continue
send/recv from there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-3-marcandre.lureau@redhat.com>
With a pipe or other reasons, read/write may return less than the
requested bytes. This happens with the test-io-channel-command test on
Windows. glib spawn code uses a binary pipe of 4096 bytes, and the first
read returns that much (although more are requested), for some unclear
reason...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-2-marcandre.lureau@redhat.com>
As described in:
https://learn.microsoft.com/en-us/visualstudio/debugger/how-to-set-a-thread-name-in-native-code?view=vs-2022
SetThreadDescription() is available since Windows 10, version 1607 and
in some versions only by "Run Time Dynamic Linking". Its declaration is
not yet in mingw, so we lookup the function the same way glib does.
Tested with Visual Studio Community 2022 debugger.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
The patch adds "show_menubar" command line option for GTK UI similar to
"show_tabs". This option allows to hide menu bar initially, it still can
be toggled by shortcut and other shortcuts still work.
Signed-off-by: Bryce Mills <brycemills@proton.me>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <NWO_zx1CT5Aj9vAXsRlqBppXd63gcKwL9V1qM1Meh36M_9tCw-EsCnfpvONXhHjmtKIUoSuCy9OO6cHS7M8b0oHBOCZG6f1jZ4Q2tqgI2Qo=@proton.me>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A zero value for dpi will lead to a division by zero in qemu_edid_dpi_to_mm().
Tested by runnig qemu-edid -dX, X = 0, 100.
Resolves: qemu-project/qemu#1249
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Message-Id: <20221011151216.64897-1-smitterl@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
test-image-locking leaves some temporary files around - clean
them up. While we're at it, test-image-locking is a unit test,
so it should not use "qtest.*" for temporary file names. Give
them better names instead, so that it clear where the temporary
files come from.
Message-Id: <20221012085932.799221-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Although the grab menu item represents the tabbed displays, the old
implicit mouse ungrabbing logic changes the grab menu item even for
an untabbed display.
Leave the grab menu item when implicitly ungrabbing mouse for an
untabbed display. The new ungrabbing logic introduced in
gd_mouse_mode_change() strictly follows the corresponding grabbing
logic found in gd_button_event().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221008140116.11473-1-akihiko.odaki@daynix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While being at it add a #define for the magic 0x1040 number.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-6-kraxel@redhat.com>
Drop the list of modern virtio devices and explain how they
are calculated instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-5-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
Add new firmware feature flags for the recently added confidential
computing operating modes by amd and intel.
While being at it also fix the path to the amd sev documentation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20220930133220.1771336-1-kraxel@redhat.com>
At present the codes uses sigaction() to install signal handler with
a flag SA_RESETHAND. Such usage can be covered by the signal() API
that is a simplified interface to the general sigaction() facility.
Update to use signal() to install the signal handler, as it is
available on Windows which we are going to support.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006151927.2079583-11-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This case was written to use hardcoded /tmp directory for temporary
files. Update to use g_dir_make_tmp() for a portable implementation.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006151927.2079583-5-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is some of the simplest test we could perform, it simply connects
to the VNC server via passed-in socket FDs and checks the connection can
be established.
Another series will make this test work on Windows as well.
As always, more tests can be added later! :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006130513.2683873-1-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 730fe750fb.
Unconditionally building all the bios for all arches was a little too
far too fast.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221011113417.794841-4-alex.bennee@linaro.org>
Some avocado tests fail if QEMU was built without libslirp. Add
require_netdev('user') checks where necessary:
These tests try to ping 10.0.2.2 and expect it to succeed:
boot_linux_console.py:BootLinuxConsole.test_arm_emcraft_sf2
boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_sd
ppc_bamboo.py:BambooMachine.test_ppc_bamboo
These tests run a commandline that includes '-net user':
machine_aspeed.py:AST2x00Machine.test_arm_ast2500_evb_builroot
(and others that use the do_test_arm_aspeed_buidroot_start()
or do_test_arm_aspeed_sdk_start() helper functions)
These changes seem to be sufficient for 'make check-avocado'
to not fail on a --disable-slirp build.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221001195224.2453581-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A thread often fails to bind an egl context to itself after guest VM is
rebooted because the context is still owned by another thread. It is not
very clear what condition makes this happen but this can be prevented
by unbinding the context from the thread in the end of gd_egl_switch.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220928215805.4661-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extended ClientCutText messages start with a 4-byte header. If len < 4,
an integer underflow occurs in vnc_client_cut_text_ext. The result is
used to decompress data in a while loop in inflate_buffer, leading to
CPU consumption and denial of service. Prevent this by checking dlen in
protocol_client_msg.
Fixes: CVE-2022-3165
Fixes: 0bf41cab93 ("ui/vnc: clipboard support")
Reported-by: TangPeng <tangpeng@qianxin.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20220925204511.1103214-1-mcascell@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Configure pci bridge setting to test ivshmem on 'q35'.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-10-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Configure pci bridge setting to run tests on 'q35' machine type.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-9-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using g_autofree char* and g_strdup_printf(...) instead of ugly
snprintf on stack array.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-8-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-7-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add pci bridge setting to test hotplug.
Duplicate tests for plugging scsi and virtio devices for q35 machine type.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-6-michael.labiuk@virtuozzo.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-5-michael.labiuk@virtuozzo.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Moving common code to function.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-4-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Configure pci bridge setting to plug pci device and unplug.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-3-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move sending 'device_del' command to separate function.
Function can be used in case of addition action is needed to start
actual removing device after sending command.
Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-2-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fixed typo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the unused local variable "records".
Signed-off-by: dinglimin <dinglimin@cmss.chinamobile.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20220928080555.2263-1-dinglimin@cmss.chinamobile.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So we don't need to set anywhere else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[thuth: Drop changes in tests/qtest/fuzz/ since the fuzzers still need this]
Message-Id: <20220902165126.1482-2-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add support for saving/restoring extended save states when signals
are delivered. This allows using AVX, MPX or PKRU registers in
signal handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are corner cases where rate->opos can overflow. For
example, if QEMU is started with -audiodev pa,id=audio0,
out.frequency=11025 -device ich9-intel-hda -device hda-duplex,
audiodev=audio0 and the guest plays audio with a sampling
frequency of 44100Hz, rate->opos will overflow after 27.05h
and the audio stream will be silent for a long time.
To prevent a rate->opos and also a rate->ipos overflow, both
are wrapped around after a short time. The wrap around point
rate->ipos >= 0x10001 is an arbitrarily selected value and can
be any small value, 0 and 1 included.
The comment that an ipos overflow will result in an infinite
loop has been removed, because in this case the resampling code
only generates no more output samples and the audio stream stalls.
However, there is no infinite loop.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220923183640.8314-12-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The calculation of the buffer size needed to store audio samples
after resampling is wrong for audio recording. For audio recording
sw->ratio is calculated as
sw->ratio = frontend sample rate / backend sample rate.
From this follows
frontend samples = frontend sample rate / backend sample rate
* backend samples
frontend samples = sw->ratio * backend samples
In 2 of 3 places in the audio recording code where sw->ratio
is used in a calculation to get the number of frontend frames,
the calculation is wrong. Fix this. The 3rd formula in
audio_pcm_sw_read() is correct.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/71
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split out the code in audio_get_avail() that calculates the
buffer size that the audio frontend can read. This is similar
to the code changes in audio_get_free().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename and refactor audio_sw_bytes_free(). This function is not
limited to calculate the free audio buffer size. The renamed
function returns the number of frames instead of bytes.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Swap the rate and info parameters of the audio_rate_get_bytes()
function to align the parameter order with the rest of the
audio_rate_*() functions.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace a comment with a question with the answer.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It seems there is a demand [1] for low latency playback over
SPICE. Add a pcm_ops buffer_get_free function to reduce the
playback latency. The mixing engine buffer becomes a temporary
buffer.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-01/msg01644.html
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next patch needs two new rate control functions. The first
one returns the bytes needed at call time to maintain the
selected rate. The second one adjusts the bytes actually sent.
Split the audio_rate_get_bytes() function into these two
functions and reintroduce audio_rate_get_bytes().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the buffer_get_free pcm_ops function to report the free
ALSA playback buffer. The generic buffer becomes a temporary
buffer and is empty after a call to audio_run_out().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
