Commit Graph

616 Commits

Author SHA1 Message Date
Laszlo Ersek
7444ca4ee2 hw/i386/pc: factor out pc_cmos_init_floppy()
Extract the pc_cmos_init_floppy() function from pc_cmos_init(). The
function sets two RTC registers: floppy drive types (0x10), overwriting
the earlier value in there), and REG_EQUIPMENT_BYTE (0x14), setting bits
in the prior value.

Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-08 10:09:55 +03:00
Paulo Alcantara
920557971b ich9: add TCO interface emulation
This interface provides some registers within a 32-byte range and can be
acessed through PCI-to-LPC bridge interface (PMBASE + 0x60).

It's commonly used as a watchdog timer to detect system lockups through
SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If
NO_REBOOT bit is not set in GCS (General Control and Status register),
the system will be resetted upon second timeout if TCO_RLD register
wasn't previously written to prevent timeout.

This patch adds support to TCO watchdog logic and few other features
like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection,
etc. are not implemented yet.

Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07 13:12:22 +03:00
Paolo Bonzini
355023f201 pc: add SMM property
The property can take values on, off or auto.  The default is "off"
for KVM and pre-2.4 machines, otherwise "auto" (which makes it
available on TCG or on new-enough kernels).

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06 18:39:59 +02:00
Paolo Bonzini
fba72476c6 ich9: add smm_enabled field and arguments
Q35's ACPI device is hard-coding SMM availability to KVM.  Place the
logic where the board is created instead, so that it will be possible
to override it.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06 17:59:44 +02:00
Paolo Bonzini
61e66c6237 pc_piix: rename kvm_enabled to smm_enabled
We will enable SMM even if KVM is in use.  Rename the field and
arguments.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06 17:59:44 +02:00
Bharata B Rao
8e23184b6b pc: Abort if HotplugHandlerClass::plug() fails
HotplugHandlerClass::plug() shouldn't fail and hence use error_abort
to abort if it fails.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03 17:47:58 -03:00
Bharata B Rao
43bbb49ef7 pc,pc-dimm: Factor out reusable parts in pc_dimm_plug to a separate routine
pc_dimm_plug() has code that will be needed for memory plug handlers
in other archs too. Extract code from pc_dimm_plug() into a generic
routine pc_dimm_memory_plug() that resides in pc-dimm.c. Also
correspondingly refactor re-usable unplug code into pc_dimm_memory_unplug().

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03 17:47:58 -03:00
Bharata B Rao
a7d69ff10b pc,pc-dimm: Extract hotplug related fields in PCMachineState to a structure
Move hotplug_memory_base and hotplug_memory fields of PCMachineState
into a separate structure so that the same can be made use of from
other architectures supporing memory hotplug.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03 17:47:58 -03:00
Peter Maydell
dc1e1350f8 virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
 we are adding functionality to the pxb in order
 to make OVMF work on it.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
 SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
 LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
 JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
 13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
 k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
 =6WvB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  Fix glib_subprocess test
  hw/pci-bridge: format special OFW unit address for PXB host
  hw/core: explicit OFW unit address callback for SysBusDeviceClass
  hw/pci-bridge: disable SHPC in PXB
  hw/pci-bridge: introduce "shpc" property
  hw/pci: introduce shpc_present() helper function
  hw/pci-bridge: add macro for "msi" property
  hw/pci-bridge: add macro for "chassis_nr" property
  hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
  migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
  add pci-bridge-seat
  pc: cleanup and convert TMP ACPI device description to AML API
  MAINTAINERS: add ACPI entry
  vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
  balloon: add a feature bit to let Guest OS deflate balloon on oom
  qdev: fix OVERFLOW_BEFORE_WIDEN
  virito-pci: fix OVERRUN problem

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-26 15:57:43 +01:00
Gonglei
1ea6305a83 pci-assign: QOMify
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23 19:57:28 +03:00
Igor Mammedov
72d97b3a54 pc: cleanup and convert TMP ACPI device description to AML API
remove some code duplication in acpi-build.c and drop 5
ASL and binary blobs files with TPM ACPI device description,
replacing them with 1 small hunk written in AML API.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-23 17:08:21 +02:00
Markus Armbruster
a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster
d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Eduardo Habkost
473a49460d q35: Re-enable FDC on pc-q35-2.3 and older
commit ea96bc629c doesn't match the patch
submitted by Laszlo to qemu-devel. We reuse pc_q35_2_4_machine_options()
inside pc_q35_2_3_machine_options(), so we need to undo the no_floppy
change in pc_q35_2_3_machine_options().

(This discrepancy was due to a bad merge.)

This restores the previous behavior where all the 2.3 and older machines
had no_floppy=0.

Reported-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1434646168-3100-1-git-send-email-ehabkost@redhat.com
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[PMM: mention that this was a merge issue, not a review issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 09:40:35 +01:00
Dr. David Alan Gilbert
37fb569c01 Disable section footers on older machine types
The next patch adds section footers; but we don't want to
break migration compatibility so disable them on older
machine types

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:54:01 +02:00
Peter Maydell
d8e3b729cf pc, acpi, virtio
Most notably this includes virtio 1 patches
 Still not all devices converted, and not fully spec compliant,
 so disabled by default.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVeXakAAoJECgfDbjSjVRpyFAH/AwSJhBbQOxtqS66INnzoLRJ
 MWD3cP8tj0PzXsLx0cuPxdTboHH60alhSp+iLGv4NgNw15okY71bY2eLhewxS66W
 a0wzVCaqeeD5GAoQaSOlqNLrhBodsKS62BWD9y0kK9rtMJfCW2C1JP8Mpue1XMuE
 UC72tF4Q6wVdBD/kTD9DZW/23roFu0SuieFSjbQNNi1lInXtDv79UGX0xUHaXlal
 +qCtRIy/wNZF0z5arNV/Skq7LKqYl7KZtTapZByy+q6vu0L8mOeXgJ9DLh666htB
 NQJJ+VhsgBKPHmZqf8h4mPlvyp03rkr5dIGk7iB2o44GPaEJ/RjZ4wULjxWD12s=
 =UY/0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, acpi, virtio

Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (42 commits)
  i386/acpi-build: fix PXB workarounds for unsupported BIOSes
  i386/acpi-build: more traditional _UID and _HID for PXB root buses
  vhost-scsi: move qdev properties into vhost-scsi.c
  virtio-9p-device: move qdev properties into virtio-9p-device.c
  virtio-serial-bus: move qdev properties into virtio-serial-bus.c
  virtio-rng: move qdev properties into virtio-rng.c
  virtio-scsi: move qdev properties into virtio-scsi.c
  virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
  virtio-net: move qdev properties into virtio-net.c
  virtio-input: emulated devices [pci]
  virtio-input: core code & base class [pci]
  pci: add PCI_CLASS_INPUT_*
  virtio-pci: fill VirtIOPCIRegions early.
  virtio-pci: drop identical virtio_pci_cap
  virtio-pci: move cap type to VirtIOPCIRegion
  virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
  virtio-pci: add virtio_pci_modern_region_map()
  virtio-pci: add virtio_pci_modern_regions_init()
  virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
  virtio-balloon: switch to virtio_add_feature
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-11 15:33:38 +01:00
Laszlo Ersek
4ebc736e99 i386/acpi-build: fix PXB workarounds for unsupported BIOSes
The patch

  apci: fix PXB behaviour if used with unsupported BIOS

uses the following condition to see if a "PXB mem/IO chunk" has *not* been
configured by the BIOS:

  (!range_base || range_base > range_limit)

When this condition evaluates to true, said patch *omits* the
corresponding entry from the _CRS.

Later on the patch checks for the opposite condition (with the intent of
*adding* entries to the _CRS if the "PXB mem/IO chunks" *have* been
configured). Unfortunately, the condition was negated incorrectly: only
the first ! operator was removed, which led to the nonsensical expression

  (range_base || range_base > range_limit)

leading to bogus entries in the _CRS, and causing BSOD in Windows Server
2012 R2 when it runs on OVMF.

The correct negative of the condition seen at the top is

  (range_base && range_base <= range_limit)

Fix the expressions.

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-11 12:40:30 +02:00
Laszlo Ersek
c96d9286a6 i386/acpi-build: more traditional _UID and _HID for PXB root buses
The ACPI specification permits the _HID and _UID objects to evaluate to
strings. (See "6.1.5 _HID (Hardware ID)" and "6.1.12 _UID (Unique ID)" in
the ACPI v6.0 spec.)

With regard to related standards, the UEFI specification can also express
a device address composed from string _HID and _UID identifiers, inside
the Expanded ACPI Device Path Node. (See "9.3.3 ACPI Device Path", Table
49, in the UEFI v2.5 spec.)

However, numeric (integer) contents for both _HID and _UID are more
traditional. They are recommended by the UEFI spec for size reasons:

  [...] the ACPI Device Path node is smaller and should be used if
  possible to reduce the size of device paths that may potentially be
  stored in nonvolatile storage [...]

External tools support them better (for example the --acpi_hid and
--acpi_uid options of "efibootmgr" only take numeric identifiers).
Finally, numeric _HID and _UID contents are existing practice in the QEMU
source.

This patch was tested with a Fedora 20 LiveCD and a preexistent Windows
Server 2012 R2 guest. Using "acpidump" and "iasl" in the Fedora guest, we
get, in the SSDT:

> Scope (\_SB)
> {
>   Device (PC04)
>   {
>     Name (_UID, 0x04)  // _UID: Unique ID
>     Name (_HID, EisaId ("PNP0A03") /* PCI Bus */)  // _HID: Hardware ID

Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-11 12:40:30 +02:00
Paolo Bonzini
f809c60512 target-i386: use memory API to implement SMRAM
Remove cpu_smm_register and cpu_smm_update.  Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram.  This extra region is enabled or disabled
as the CPU enters/exits SMM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Peter Maydell
d6688ba17b pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
 the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
 ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
 am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
 REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
 E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
 NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
 =5AmP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc, acpi, virtio, tpm

This includes pxb support by Marcel, as well as multiple enhancements all over
the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu Jun  4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (28 commits)
  vhost: logs sharing
  hw/acpi: piix4_pm_init(): take fw_cfg object no more
  hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
  hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
  pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
  docs: Add PXB documentation
  apci: fix PXB behaviour if used with unsupported BIOS
  hw/pxb: add numa_node parameter
  hw/pci: add support for NUMA nodes
  hw/pxb: add map_irq func
  hw/pci: inform bios if the system has extra pci root buses
  hw/pci: introduce PCI Expander Bridge (PXB)
  hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
  hw/acpi: remove from root bus 0 the crs resources used by other buses.
  hw/acpi: add _CRS method for extra root busses
  hw/apci: add _PRT method for extra PCI root busses
  hw/acpi: add support for i440fx 'snooping' root busses
  hw/pci: extend PCI config access to support devices behind PXB
  hw/i386: query only for q35/pc when looking for pci host bridge
  hw/pci: made pci_bus_num a PCIBusClass method
  ...

Conflicts:
	hw/i386/pc_piix.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 18:33:24 +01:00
Peter Maydell
2700a976db trivial patches for 2015-06-03
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVbvwjAAoJEL7lnXSkw9fbaFwIAIh6PN5v6fvuEjnPX5ijHZC2
 7iJoFd0I2cYrxgLe4xONFX9qzV5vgdEAJfXCljVCKAmzu5RK7G0ZSW81sJ3t6Mp8
 kA8buJeyTp2UcTlDrC3qji8ScEIj+g8I9tKGflNVI2uDAVumMBPqnJNSFhbaqYlu
 SEq+4y/D3J6xPzr7NhyHliG0NmxJrIn6QCtux5djj3xO4KXfp1j2YQCPKhYjkRlW
 wHfqeD7x9LX6875FX3csgfPsYIycW0WYtba2adTe0vbTsclOY0CU3ho8HPeXgHE6
 WQj6KYGT8Fo0zmK8UV0Jmok7+hZoxXXInf6vY+sSY58oe71FgdxNwLvIC6N0eQc=
 =AALk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-06-03' into staging

trivial patches for 2015-06-03

# gpg: Signature made Wed Jun  3 14:07:47 2015 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-06-03: (30 commits)
  configure: postfix --extra-cflags to QEMU_CFLAGS
  cadence_gem: Fix Rx buffer size field mask
  slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
  translate-all: delete prototype for non-existent function
  Add -incoming help text
  hw/display/tc6393xb.c: Fix misusing qemu_allocate_irqs for single irq
  hw/arm/nseries.c: Fix misusing qemu_allocate_irqs for single irq
  hw/alpha/typhoon.c: Fix misusing qemu_allocate_irqs for single irq
  hw/unicore32/puv3.c: Fix misusing qemu_allocate_irqs for single irq
  hw/lm32/milkymist.c: Fix misusing qemu_allocate_irqs for single irq
  hw/lm32/lm32_boards.c: Fix misusing qemu_allocate_irqs for single irq
  hw/ppc/prep.c: Fix misusing qemu_allocate_irqs for single irq
  hw/sparc/sun4m.c: Fix misusing qemu_allocate_irqs for single irq
  hw/timer/arm_timer.c: Fix misusing qemu_allocate_irqs for single irq
  hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irq
  hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irq
  hw/i386/pc: Fix misusing qemu_allocate_irqs for single irq
  hw/intc/exynos4210_gic.c: Fix memory leak by adjusting order
  hw/arm/omap_sx1.c: Fix memory leak spotted by valgrind
  hw/ppc/e500.c: Fix memory leak
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04 12:49:15 +01:00
Laszlo Ersek
6e7d82497d hw/acpi: piix4_pm_init(): take fw_cfg object no more
This PIIX4 init function has no more reason to receive a pointer to the
FwCfg object. Remove the parameter from the prototype, and update callers.

As a result, the pc_init1() function no longer needs to save the return
value of pc_memory_init() and xen_load_linux(), which makes it more
similar to pc_q35_init().

The return type & value of pc_memory_init() and xen_load_linux() are not
changed themselves; maybe we'll need their return values sometime later.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-06-04 11:25:42 +02:00
Marcel Apfelbaum
0f6dd8e1d5 apci: fix PXB behaviour if used with unsupported BIOS
PXB does not work with unsupported bioses, but should
not interfere with normal OS operation.
We don't ship them anymore, but it's reasonable
to keep the work-around until we update the bios in qemu.

Fix this by not adding PXB mem/IO chunks to _CRS
if they weren't configured by BIOS.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:18 +02:00
Marcel Apfelbaum
0e79e51a7d hw/pxb: add numa_node parameter
The pxb can be attach to and existing numa node by specifying
numa_node option that equals the desired numa nodeid.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:18 +02:00
Marcel Apfelbaum
2118196bb3 hw/pci: inform bios if the system has extra pci root buses
The bios looks for 'etc/extra-pci-roots' to decide if
is going to scan further buses after bus 0 tree.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:18 +02:00
Marcel Apfelbaum
dcdca29655 hw/acpi: remove from root bus 0 the crs resources used by other buses.
If multiple root buses are used, root bus 0 cannot use all the
pci holes ranges. Remove the IO/mem ranges used by the other
primary buses.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:17 +02:00
Marcel Apfelbaum
a43c6e2762 hw/acpi: add _CRS method for extra root busses
Save the IO/mem/bus numbers ranges assigned to the extra root busses
to be removed from the root bus 0 range.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:17 +02:00
Marcel Apfelbaum
0d8935e337 hw/apci: add _PRT method for extra PCI root busses
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:17 +02:00
Marcel Apfelbaum
a4894206e3 hw/acpi: add support for i440fx 'snooping' root busses
If the machine has extra root busses that are snooping to
the i440fx host bridge, we need to add them to
acpi in order to be properly detected by guests.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:17 +02:00
Marcel Apfelbaum
ca6c18556c hw/i386: query only for q35/pc when looking for pci host bridge
Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE anymore.
On i386 arch we only have two pci hosts, so we can look only for them.

Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03 18:19:16 +02:00
Michael S. Tsirkin
cb3d37a93c acpi: add missing ssdt
commit 5cb18b3d7b
    TPM2 ACPI table support

was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
 hex files).

Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-03 18:19:15 +02:00
Shannon Zhao
0b0cc076b7 hw/i386/pc: Fix misusing qemu_allocate_irqs for single irq
Since pc_allocate_cpu_irq only requests one irq, so let it just call
qemu_allocate_irq.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-03 14:21:24 +03:00
Shannon Zhao
d370dfa9f3 hw/i386/acpi-build: decref after use
valgrind complains about:
==16447== 48 bytes in 2 blocks are definitely lost in loss record 2,033 of 3,310
==16447==    at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447==    by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447==    by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447==    by 0x53EC3F: qint_from_int (qint.c:33)
==16447==    by 0x53B426: qmp_output_type_int (qmp-output-visitor.c:162)
==16447==    by 0x539257: visit_type_uint32 (qapi-visit-core.c:147)
==16447==    by 0x471D07: property_get_uint32_ptr (object.c:1651)
==16447==    by 0x47000C: object_property_get (object.c:822)
==16447==    by 0x472428: object_property_get_qobject (qom-qobject.c:37)
==16447==    by 0x25701A: build_append_pci_bus_devices (acpi-build.c:520)
==16447==    by 0x25902E: build_ssdt (acpi-build.c:1004)
==16447==    by 0x25A0A8: acpi_build (acpi-build.c:1420)

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-03 14:21:24 +03:00
Shannon Zhao
2ba154cf4e hw/i386/pc_piix: Fix memory leak
valgrind complains about:
==16447== 8 bytes in 1 blocks are definitely lost in loss record 552 of 3,310
==16447==    at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447==    by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447==    by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447==    by 0x36FB47: qemu_extend_irqs (irq.c:55)
==16447==    by 0x36FBD3: qemu_allocate_irqs (irq.c:64)
==16447==    by 0x24E622: pc_init1 (pc_piix.c:287)
==16447==    by 0x24E76A: pc_init_pci (pc_piix.c:310)
==16447==    by 0x2E9360: main (vl.c:4226)

==16447== 128 bytes in 1 blocks are definitely lost in loss record 2,569 of 3,310
==16447==    at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447==    by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447==    by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447==    by 0x36FB47: qemu_extend_irqs (irq.c:55)
==16447==    by 0x36FBD3: qemu_allocate_irqs (irq.c:64)
==16447==    by 0x25BEB2: kvm_i8259_init (i8259.c:133)
==16447==    by 0x24E1F1: pc_init1 (pc_piix.c:219)
==16447==    by 0x24E76A: pc_init_pci (pc_piix.c:310)
==16447==    by 0x2E9360: main (vl.c:4226)

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-03 14:21:23 +03:00
Andreas Färber
0e3bd56294 pc: Ensure non-zero CPU ref count after attaching to ICC bus
Setting the parent bus of a device increases its ref count, which we
ultimately want to level out. However it is only safe to do so after the
last reference to the device in local code, as qom-set or similar operations
might decrease the ref count.

Therefore move the object_unref() from pc_new_cpu() into its callers.

The APIC operations on the last CPU in pc_cpus_init() are still potentially
insecure, but that is beyond the scope of this code movement.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-06-02 15:15:52 -03:00
Michael S. Tsirkin
9e472263b0 acpi: add missing ssdt
commit 5cb18b3d7b
    TPM2 ACPI table support

was missing a file, so build with iasl fails
(build without iasl works since it uses the generated
 hex files).

Reported-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01 21:40:22 +02:00
Stefan Berger
5cb18b3d7b TPM2 ACPI table support
Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.

Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01 14:18:54 +02:00
Laszlo Ersek
ea96bc629c i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern
Machine type.

Hence, let us not instantiate the FDC when all of the following apply:
- the machine type is pc-q35-2.4 or later,
- "-device isa-fdc" is not passed on the command line (nor in the config
  file),
- no "-drive if=floppy,..." is requested.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31 20:24:07 +02:00
Laszlo Ersek
6cd2234ccb i386/pc_q35: don't insist on board FDC if there's no default floppy
The "no_floppy = 1" machine class setting causes "default_floppy" in
main() to become zero. Consequently, default_drive() will not call
drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no
default floppy drive will be created for the virtual machine. In that
case, board code should also not insist on the creation of the
board-default FDC.

The board-default FDC will still be created if the user requests a floppy
drive with "-drive if=floppy".

Additionally, separate FDCs can be specified manually with "-device
isa-fdc". They allow the

  -device isa-fdc,driveA=...

syntax that is more flexible than the one required by the board-default
FDC:

  -global isa-fdc.driveA=...

This patch doesn't change the behavior observably, as all Q35 machine
types have "no_floppy = 0".

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31 20:24:06 +02:00
Laszlo Ersek
936a7c1cf7 i386/pc: '-drive if=floppy' should imply a board-default FDC
Even if board code decides not to request the creation of the FDC (keyed
off board-level factors, to be determined later), we should create the FDC
nevertheless if the user passes '-drive if=floppy' on the command line.

Otherwise '-drive if=floppy' would break without explicit '-device
isa-fdc' on such boards.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31 20:24:06 +02:00
Laszlo Ersek
fd53c87cf6 i386/pc: pc_basic_device_init(): delegate FDC creation request
This patch introduces no observable change, but it allows the callers of
pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or
not request) the creation of the FDC explicitly.

At the moment both callers pass constant create_fdctrl=true (hence no
observable change).

Assuming a board passes create_fdctrl=false, "floppy" will be NULL on
output, and (beyond the FDC not being created) that NULL will be passed on
to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31 20:24:06 +02:00
Radim Krčmář
2332333c97 pc: acpi: fix pvpanic for buggy guests
In the old times, we always had pvpanic in ACPI and a _STA method told
the guest not to use it.  Automatic generation dropped the _STA method
as the specification says that missing _STA means enabled and working.
Some guests (Linux) had buggy drivers and this change made them unable
to utilize pvpanic.

A Linux patch is posted as well, but I think it's worth to make pvpanic
useable on old guests at the price of three lines and few bytes of SSDT.

The old _STA method was
  Method (_STA, 0, NotSerialized) {
      Store (PEST, Local0)
      If (LEqual (Local0, Zero)) {
          Return (Zero) }
      Else {
          Return (0x0F) }}

Igor pointed out that we don't need to use a method to return a constant
and that 0xB (don't show in UI) is the common definition now.

Also, the device used to be PEVT.  (PEVT as in "panic event"?)

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
99fbeafee8 pc: Generate init functions with a macro
All pc-i440fx and pc-q35 init functions simply call the corresponding
compat function and then call the main init function. Use a macro to
generate that code.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
211b5b1d0a piix: Eliminate pc_init_pci()
The function is not needed anymore, we can simply call pc_init1()
directly.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
72d164aa73 piix: Add kvmclock_enabled, pci_enabled globals
This looks like a step backwards, but it will allow pc-0.1[0123] and
isapc to follow the same compat+init pattern used by the other
machine-types, allowing us to generate all init function using the same
macro later.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
d644b11657 pc: Remove qemu_register_pc_machine() function
The helper is not needed anymore, as the PC machine classes are
registered using QOM directly.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
865906f7fd pc: Don't use QEMUMachine anymore
Now that we have a DEFINE_PC_MACHINE helper macro that just requires an
initialization function, it is trivial to convert them to register a QOM
machine class directly, instead of using QEMUMachine.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
25519b062c pc: Move compat_props setting inside *_machine_options() functions
This will simplify the DEFINE_PC_MACHINE macro, and will help us to
implement reuse of PC_COMPAT_* macros through class_init function reuse,
in the future.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
fddd179ab9 pc: Convert *_MACHINE_OPTIONS macros into functions
By now the new functions will get QEMUMachine as argument, but they will
be later converted to initialize a MachineClass struct directly.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00
Eduardo Habkost
61f219dfb0 pc: Define machines using a DEFINE_PC_MACHINE macro
This will automatically generate the existing QEMUMachine structs based
on the *_MACHINE_OPTIONS macros, and automatically add registration code
for them.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:26:42 +02:00