I'm far from confident this handling here is correct. Hence
RFC. In particular not sure on what locks I should hold for this
to be even moderately safe.
The function already appears to be inconsistent in what it returns
as the CONFIG_ATOMIC64 block returns the endian converted 'eventual'
value of the cmpxchg whereas the TCG_OVERSIZED_GUEST case returns
the previous value.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240219161229.11776-1-Jonathan.Cameron@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A53 r0p4 revision that QEMU emulates is affected by a CatA
erratum #843419 (i.e., the most severe), which requires workarounds in
the toolchain as well as the OS.
Since the emulation is obviously not affected in the same way, we can
indicate this via REVIDR bit #8, which on r0p4 has the meaning that no
workarounds for erratum #843419 are needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240215160202.2803452-1-ardb+git@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Architecturally, the AArch32 MSR/MRS to/from banked register
instructions are UNPREDICTABLE for attempts to access a banked
register that the guest could access in a more direct way (e.g.
using this insn to access r8_fiq when already in FIQ mode). QEMU has
chosen to UNDEF on all of these.
However, for the case of accessing SPSR_hyp from hyp mode, it turns
out that real hardware permits this, with the same effect as if the
guest had directly written to SPSR. Further, there is some
guest code out there that assumes it can do this, because it
happens to work on hardware: an example Cortex-R52 startup code
fragment uses this, and it got copied into various other places,
including Zephyr. Zephyr was fixed to not use this:
https://github.com/zephyrproject-rtos/zephyr/issues/47330
but other examples are still out there, like the selftest
binary for the MPS3-AN536.
For convenience of being able to run guest code, permit
this UNPREDICTABLE access instead of UNDEFing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-5-peter.maydell@linaro.org
Add the Cortex-R52 IMPDEF sysregs, by defining them here and
also by enabling the AUXCR feature which defines the ACTLR
and HACTLR registers. As is our usual practice, we make these
simple reads-as-zero stubs for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-4-peter.maydell@linaro.org
The Cortex-R52 implements the Configuration Base Address Register
(CBAR), as a read-only register. Add ARM_FEATURE_CBAR_RO to this CPU
type, so that our implementation provides the register and the
associated qdev property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-3-peter.maydell@linaro.org
We support two different encodings for the AArch32 IMPDEF
CBAR register -- older cores like the Cortex A9, A7, A15
have this at 4, c15, c0, 0; newer cores like the
Cortex A35, A53, A57 and A72 have it at 1 c15 c0 0.
When we implemented this we picked which encoding to
use based on whether the CPU set ARM_FEATURE_AARCH64.
However this isn't right for three cases:
* the qemu-system-arm 'max' CPU, which is supposed to be
a variant on a Cortex-A57; it ought to use the same
encoding the A57 does and which the AArch64 'max'
exposes to AArch32 guest code
* the Cortex-R52, which is AArch32-only but has the CBAR
at the newer encoding (and where we incorrectly are
not yet setting ARM_FEATURE_CBAR_RO anyway)
* any possible future support for other v8 AArch32
only CPUs, or for supporting "boot the CPU into
AArch32 mode" on our existing cores like the A57 etc
Make the decision of the encoding be based on whether
the CPU implements the ARM_FEATURE_V8 flag instead.
This changes the behaviour only for the qemu-system-arm
'-cpu max'. We don't expect anybody to be relying on the
old behaviour because:
* it's not what the real hardware Cortex-A57 does
(and that's what our ID register claims we are)
* we don't implement the memory-mapped GICv3 support
which is the only thing that exists at the peripheral
base address pointed to by the register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240206132931.38376-2-peter.maydell@linaro.org
It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile
CPU, and in fact if you try to do it we will assert:
#6 0x00007ffff4b95e96 in __GI___assert_fail
(assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101
#7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600
#8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595
#9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512
We might call pmu_counter_enabled() on an M-profile CPU (for example
from the migration pre/post hooks in machine.c); this should always
return false because these CPUs don't set ARM_FEATURE_PMU.
Avoid the assertion by not calling arm_mdcr_el2_eff() before we
have done the early return for "PMU not present".
This fixes an assertion failure if you try to do a loadvm or
savevm for an M-profile board.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240208153346.970021-1-peter.maydell@linaro.org
The TBI and TCMA bits are located within mtedesc, not desc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions "use the standard load helpers", but
fail to clean_data_tbi or populate mtedesc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Share code that creates mtedesc and embeds within simd_desc.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we added SVE_MTEDESC_SHIFT, we effectively limited the
maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining
bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored
fits within the field (expecting 8 * 4 - 1 == 31, exact fit).
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The field is encoded as [0-3], which is convenient for
indexing our array of function pointers, but the true
value is [1-4]. Adjust before calling do_mem_zpa.
Add an assert, and move the comment re passing ZT to
the helper back next to the relevant code.
Cc: qemu-stable@nongnu.org
Fixes: 206adacfb8 ("target/arm: Add mte helpers for sve scalar + int loads")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 4315f7c614 we restructured the logic for creating the
VFP related properties to avoid testing the aa32_simd_r32 feature on
AArch64 CPUs. However in the process we accidentally stopped
exposing the "vfp" QOM property on AArch32 TCG CPUs.
This mostly hasn't had any ill effects because not many people want
to disable VFP, but it wasn't intentional. Reinstate the property.
Cc: qemu-stable@nongnu.org
Fixes: 4315f7c614 ("target/arm: Restructure has_vfp_d32 test")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2098
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240126193432.2210558-1-peter.maydell@linaro.org
In kernel commit 5d5b4e8c2d9ec ("arm64/sve: Report FEAT_SVE_B16B16 to
userspace") Linux added ID_AA64ZFR0_el1.B16B16 to the set of ID
register fields which it exposes to userspace. Update our
exported_bits mask to include this.
(This doesn't yet change any behaviour for us, because we don't yet
have any CPUs that implement this feature, which is part of SVE2.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240125134304.1470404-1-peter.maydell@linaro.org
Debug exceptions that target AArch32 Hyp mode are reported differently
than on AAarch64. Internally, Qemu uses the AArch64 syndromes. Therefore
such exceptions need to be either converted to a prefetch abort
(breakpoints, vector catch) or a data abort (watchpoints).
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Klötzke <jan.kloetzke@kernkonzept.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240127202758.3326381-1-jan.kloetzke@kernkonzept.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU coding style recommends using structure typedefs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes gen_intermediate_code() signature target agnostic so the function
can be called from accel/tcg/translate-all.c without target specifics.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo in the implementation of isar_feature_aa64_tidcp1() means we
were checking the field in the wrong ID register, so we might have
provided the feature on CPUs that don't have it and not provided
it on CPUs that should have it. Correct this bug.
Cc: qemu-stable@nongnu.org
Fixes: 9cd0c0dec9 "target/arm: Implement FEAT_TIDCP1"
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2120
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240123160333.958841-1-peter.maydell@linaro.org
In commit 1b7bc9b5c8 we changed handle_vec_simd_sqshrn() so
that instead of starting with a 0 value and depositing in each new
element from the narrowing operation, it instead started with the raw
result of the narrowing operation of the first element.
This is fine in the vector case, because the deposit operations for
the second and subsequent elements will always overwrite any higher
bits that might have been in the first element's result value in
tcg_rd. However in the scalar case we only go through this loop
once. The effect is that for a signed narrowing operation, if the
result is negative then we will now return a value where the bits
above the first element are incorrectly 1 (because the narrowfn
returns a sign-extended result, not one that is truncated to the
element size).
Fix this by using an extract operation to get exactly the correct
bits of the output of the narrowfn for element 1, instead of a
plain move.
Cc: qemu-stable@nongnu.org
Fixes: 1b7bc9b5c8 ("target/arm: Avoid tcg_const_ptr in handle_vec_simd_sqshrn")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2089
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240123153416.877308-1-peter.maydell@linaro.org
Move Arm A-class Generic Timer definitions to the new
"target/arm/gtimer.h" header so units in hw/ which don't
need access to ARMCPU internals can use them without
having to include the huge "cpu.h".
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-20-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
e2h_access() was added in commit bb5972e439 ("target/arm:
Add VHE timer register redirection and aliasing") close to
the generic_timer_cp_reginfo[] array, but isn't used until
vhe_reginfo[] definition. Move it closer to the other e2h
helpers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-19-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM_CPU_IRQ/FIQ definitions are used to index the GPIO
IRQ created calling qdev_init_gpio_in() in ARMCPU instance_init()
handler. To allow non-ARM code to raise interrupt on ARM cores,
move they to 'target/arm/cpu-qom.h' which is non-ARM specific and
can be included by any hw/ file.
File list to include the new header generated using:
$ git grep -wEl 'ARM_CPU_(\w*IRQ|FIQ)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-18-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7M QDev container accesses the QDev SysTickState
by its secure/non-secure bank index. In order to make
the "hw/intc/armv7m_nvic.h" header target-agnostic in
the next commit, first move the M-profile bank index
definitions to "target/arm/cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-16-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed in commit 2d56be5a29 ("target: Declare
FOO_CPU_TYPE_NAME/SUFFIX in 'cpu-qom.h'"). See
it for more details.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Declare arm_cpu_mp_affinity() prototype in the new
"target/arm/multiprocessing.h" header so units in
hw/arm/ can use it without having to include the huge
target-specific "cpu.h".
File list to include the new header generated using:
$ git grep -lw arm_cpu_mp_affinity
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrapper to return the mp affinity bits from the cpu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename to arm_build_mp_affinity. This frees up the name for
other usage, and emphasizes that the cpu object is not involved.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/cpregs.h uses the CP_REG_ARCH_* definitions
from "target/arm/kvm-consts.h". Include it in order to
avoid when refactoring unrelated headers:
target/arm/cpregs.h:191:18: error: use of undeclared identifier 'CP_REG_ARCH_MASK'
if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/cpregs.h uses the FIELD() macro defined in
"hw/registerfields.h". Include it in order to avoid when
refactoring unrelated headers:
target/arm/cpregs.h:347:30: error: expected identifier
FIELD(HFGRTR_EL2, AFSR0_EL1, 0, 1)
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm/cpu-features.h uses the FIELD_EX32() macro
defined in "hw/registerfields.h". Include it in order
to avoid when refactoring unrelated headers:
target/arm/cpu-features.h:44:12: error: call to undeclared function 'FIELD_EX32';
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) != 0;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In arm_deliver_fault() we check for whether the fault is caused
by a data abort due to an access to a FEAT_NV2 sysreg in the
memory pointed to by the VNCR. Unfortunately part of the
condition checks the wrong argument to the function, meaning
that it would spuriously trigger, resulting in some instruction
aborts being taken to the wrong EL and reported incorrectly.
Use the right variable in the condition.
Fixes: 674e534527 ("target/arm: Report VNCR_EL2 based faults correctly")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-id: 20240116165605.2523055-1-peter.maydell@linaro.org
pmu_init() register its event checking the pm_event::supported()
handler. For INST_RETIRED, the event is only registered and the
bit enabled in the PMU Common Event Identification register when
icount is enabled as ICOUNT_PRECISE.
PMU events are TCG-only, hardware accelerators handle them
directly. Unfortunately we register the events in non-TCG builds,
leading to linking error such:
ld: Undefined symbols:
_icount_to_ns, referenced from:
_instructions_ns_per in target_arm_helper.c.o
clang: error: linker command failed with exit code 1 (use -v to see invocation)
As a kludge, give a hint to the compiler by asserting the
pm_event::get_count() and pm_event::ns_per_count() handler will
only be called under this icount mode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-5-philmd@linaro.org>
Rather than having to lookup for what the 0, 1, 2, ...
icount values are, use a enum definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231208113529.74067-4-philmd@linaro.org>
'tcg_cflags' is specific to TCG.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231130075958.21285-1-philmd@linaro.org>
In arm_pamax(), we need to cope with the virt board calling this
function on a CPU object which has been inited but not realize.
We used to do propagation of feature-flag implications (such as
"V7VE implies LPAE") at realize, so we have some code in arm_pamax()
which manually checks for both V7VE and LPAE feature flags.
In commit b8f7959f28 we moved the feature propagation for
almost all features from realize to post-init. That means that
now when the virt board calls arm_pamax(), the feature propagation
has been done. So we can drop the manual propagation handling
and check only for the feature we actually care about, which
is ARM_FEATURE_LPAE.
Retain the comment that the virt board is calling this function
with a not completely realized CPU object, because that is a
potential beartrap for later changes which is worth calling out.
(Note that b8f7959f28 actually fixed a bug in the arm_pamax()
handling: arm_pamax() was missing a check for ARM_FEATURE_V8, so it
incorrectly thought that the qemu-system-arm 'max' CPU did not have
LPAE and turned off 'highmem' support in the virt board. Following
b8f7959f28 qemu-system-arm 'max' is treated the same as
'cortex-a15' and other v7 LPAE CPUs, because the generic feature
propagation code does correctly propagate V8 -> V7VE -> LPAE.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240109143804.1118307-1-peter.maydell@linaro.org
Enable FEAT_NV2 on the 'max' CPU, and stop filtering it out for
the Neoverse N2 and Neoverse V1 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
We already print various lines of information when we take an
exception, including the ELR and (if relevant) the FAR. Now
that FEAT_NV means that we might report something other than
the old PSTATE to the guest as the SPSR, it's worth logging
this as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
When interpreting CPU dumps where FEAT_NV and FEAT_NV2 are in use,
it's helpful to include the values of HCR_EL2.{NV,NV1,NV2} in the CPU
dump format, as a way of distinguishing when we are in EL1 as part of
executing guest-EL2 and when we are just in normal EL1.
Add the bits to the end of the log line that shows PSTATE and similar
information:
PSTATE=000003c9 ---- EL2h BTYPE=0 NV NV2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This covers all the remaining offsets at 0x200 and
above, except for the GIC ICH_* registers.
(Note that because we don't implement FEAT_SPE, FEAT_TRF,
FEAT_MPAM, FEAT_BRBE or FEAT_AMUv1p1 we don't implement any
of the registers that use offsets at 0x800 and above.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets 0x168 to 0x1f8.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets 0x100 to 0x160.
Many (but not all) of the registers in this range have _EL12 aliases,
and the slot in memory is shared between the _EL12 version of the
register and the _EL1 version. Where we programmatically generate
the regdef for the _EL12 register, arrange that its
nv2_redirect_offset is set up correctly to do this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM. This commit covers offsets below 0x100; all of these
registers are redirected to memory regardless of the value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
If FEAT_NV2 redirects a system register access to a memory offset
from VNCR_EL2, that access might fault. In this case we need to
report the correct syndrome information:
* Data Abort, from same-EL
* no ISS information
* the VNCR bit (bit 13) is set
and the exception must be taken to EL2.
Save an appropriate syndrome template when generating code; we can
then use that to:
* select the right target EL
* reconstitute a correct final syndrome for the data abort
* report the right syndrome if we take a FEAT_RME granule protection
fault on the VNCR-based write
Note that because VNCR is bit 13, we must start keeping bit 13 in
template syndromes, by adjusting ARM_INSN_START_WORD2_SHIFT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
FEAT_NV2 requires that when HCR_EL2.{NV,NV2} == 0b11 then accesses by
EL1 to certain system registers are redirected to RAM. The full list
of affected registers is in the table in rule R_CSRPQ in the Arm ARM.
The registers may be normally accessible at EL1 (like ACTLR_EL1), or
normally UNDEF at EL1 (like HCR_EL2). Some registers redirect to RAM
only when HCR_EL2.NV1 is 0, and some only when HCR_EL2.NV1 is 1;
others trap in both cases.
Add the infrastructure for identifying which registers should be
redirected and turning them into memory accesses.
This code does not set the correct syndrome or arrange for the
exception to be taken to the correct target EL if the access via
VNCR_EL2 faults; we will do that in the next commit.
Subsequent commits will mark up the relevant regdefs to set their
nv2_redirect_offset, and if relevant one of the two flags which
indicates that the redirect happens only for a particular value of
HCR_EL2.NV1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Under FEAT_NV2, when HCR_EL2.{NV,NV2} == 0b11 at EL1, accesses to the
registers SPSR_EL2, ELR_EL2, ESR_EL2, FAR_EL2 and TFSR_EL2 (which
would UNDEF without FEAT_NV or FEAT_NV2) should instead access the
equivalent EL1 registers SPSR_EL1, ELR_EL1, ESR_EL1, FAR_EL1 and
TFSR_EL1.
Because there are only five registers involved and the encoding for
the EL1 register is identical to that of the EL2 register except
that opc1 is 0, we handle this by finding the EL1 register in the
hash table and using it instead.
Note that traps that apply to direct accesses to the EL1 register,
such as active fine-grained traps or other trap bits, do not trigger
when it is accessed via the EL2 encoding in this way. However, some
traps that are defined by the EL2 register may apply. We therefore
call the EL2 register's accessfn first. The only one of the five
which has such traps is TFSR_EL2: make sure its accessfn correctly
handles both FEAT_NV (where we trap to EL2 without checking ATA bits)
and FEAT_NV2 (where we check ATA bits and then redirect to TFSR_EL1).
(We don't need the NV1 tbflag bit until the next patch, but we
introduce it here to avoid putting the NV, NV1, NV2 bits in an
odd order.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
With FEAT_NV2, the condition for when SPSR_EL1.M should report that
an exception was taken from EL2 changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
