Keep all class properties in riscv_cpu_properties[].
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The array is empty and can be removed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
And remove the now unused kvm_cpu_set_cbomz_blksize() setter.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do the same we did with 'cbom_blocksize' in the previous patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After adding a KVM finalize() implementation, turn cbom_blocksize into a
class property. Follow the same design we used with 'vlen' and 'elen'.
The duplicated 'cbom_blocksize' KVM property can be removed from
kvm_riscv_add_cpu_user_properties().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To turn cbom_blocksize and cboz_blocksize into class properties we need
KVM specific changes.
KVM is creating its own version of these options with a customized
setter() that prevents users from picking an invalid value during init()
time. This comes at the cost of duplicating each option that KVM
supports. This will keep happening for each new shared option KVM
implements in the future.
We can avoid that by using the same property TCG uses and adding
specific KVM handling during finalize() time, like TCG already does with
riscv_tcg_cpu_finalize_features(). To do that, the common CPU property
offers a way of knowing if an option was user set or not, sparing us
from doing unneeded syscalls.
riscv_kvm_cpu_finalize_features() is then created using the same
KVMScratch CPU we already use during init() time, since finalize() time
is still too early to use the official KVM CPU for it. cbom_blocksize
and cboz_blocksize are then handled during finalize() in the same way
they're handled by their KVM specific setter.
With this change we can proceed with the blocksize changes in the common
code without breaking the KVM driver.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do the same thing we did with 'vlen' in the previous patch with 'elen'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Turning 'vlen' into a class property will allow its default value to be
overwritten by cpu_init() later on, solving the issue we have now where
CPU specific settings are getting overwritten by the default.
Common validation bits are moved from riscv_cpu_validate_v() to
prop_vlen_set() to be shared with KVM.
And, as done with every option we migrated to riscv_cpu_properties[],
vendor CPUs can't have their 'vlen' value changed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The same rework did in 'priv_spec' is done for 'vext_spec'. This time is
simpler, since we only accept one value ("v1.0") and we'll always have
env->vext_ver set to VEXT_VERSION_1_00_0, thus we don't need helpers to
convert string to 'vext_ver' back and forth like we needed for
'priv_spec'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'priv_spec' and 'vext_spec' are two string options used as a fancy way
of setting integers in the CPU state (cpu->env.priv_ver and
cpu->env.vext_ver). It requires us to deal with string parsing and to
store them in cpu_cfg.
We must support these string options, but we don't need to store them.
We have a precedence for this kind of arrangement in target/ppc/compat.c,
ppc_compat_prop_get|set, getters and setters used for the
'max-cpu-compat' class property of the pseries ppc64 machine. We'll do
the same with both 'priv_spec' and 'vext_spec'.
For 'priv_spec', the validation from riscv_cpu_validate_priv_spec() will
be done by the prop_priv_spec_set() setter, while also preventing it to
be changed for vendor CPUs. Add two helpers that converts env->priv_ver
back and forth to its string representation. These helpers allow us to
get a string and set 'env->priv_ver' and return a string giving the
current env->priv_ver value. In other words, make the cpu->cfg.priv_spec
string obsolete.
Last but not the least, move the reworked 'priv_spec' option to
riscv_cpu_properties[].
After all said and done, we don't need to store the 'priv_spec' string in
the CPU state, and we're now protecting vendor CPUs from priv_ver
changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,priv_spec="v1.12.0"
qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.priv_spec=v1.12.0:
CPU 'sifive-e51' does not allow changing the value of 'priv_spec'
Current 'priv_spec' val: v1.10.0
$
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'pmp' to riscv_cpu_properties[], creating a new setter() for it
that forbids 'pmp' to be changed in vendor CPUs, like we did with the
'mmu' option.
We'll also have to manually set 'pmp = true' to generic CPUs that were
still relying on the previous default to set it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") already did some of the work by making some
cpu_init() functions to explictly enable their own 'mmu' default.
The generic CPUs didn't get update by that commit, so they are still
relying on the defaults set by the 'mmu' option. But having 'mmu' and
'pmp' being default=true will force CPUs that doesn't implement these
options to set them to 'false' in their cpu_init(), which isn't ideal.
We'll move 'mmu' to riscv_cpu_properties[] without any defaults, i.e.
the default will be 'false'. Compensate it by manually setting 'mmu =
true' to the generic CPUs that requires it.
Implement a setter for it to forbid the 'mmu' setting to be changed for
vendor CPUs. This will allow the option to exist for all CPUs and, at
the same time, protect vendor CPUs from undesired changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,mmu=true
qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.mmu=true:
CPU 'sifive-e51' does not allow changing the value of 'mmu'
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Every property in riscv_cpu_options[] will be migrated to
riscv_cpu_properties[]. This will make their default values init
earlier, allowing cpu_init() functions to overwrite them. We'll also
implement common getters and setters that both accelerators will use,
allowing them to share validations that TCG is doing.
At the same time, some options (namely 'vlen', 'elen' and the cache
blocksizes) need a way of tracking if the user set a value for them.
This is benign for TCG since the cost of always validating these values
are small, but for KVM we need syscalls to read the host values to make
the validations, thus knowing whether the user didn't touch the values
makes a difference.
We'll track user setting for these properties using a hash, like we do
in the TCG driver. All riscv cpu options will update this hash in case
the user sets it. The KVM driver will use this hash to minimize the
amount of syscalls done.
For now, both 'pmu-mask' and 'pmu-num' shouldn't be changed for vendor
CPUs. The existing setter for 'pmu-num' is changed to add this
restriction. New getters and setters are required for 'pmu-mask'
While we're at it, add a 'static' modifier to 'prop_pmu_num' since we're
not exporting it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll use this function in target/riscv/cpu.c to implement setters that
won't allow vendor CPU options to be changed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
user_spec, bext_spec and bext_ver aren't being used.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the B extension is enabled warn if the user has disabled any of the
required extensions that are part of the 'B' extension. Conversely
enable the extensions that make up the 'B' extension if it is enabled.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111161644.33630-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the infrastructure for the 'B' extension which is the union of the
Zba, Zbb and Zbs instructions.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111161644.33630-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add requirement that 'A' is enabled for all atomic instructions that
lack the check. This makes the 64-bit versions consistent with the
32-bit versions in the same file.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240110163959.31291-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
/mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
c6RLQQ==
=TMiE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu into staging
tcg: Introduce TCG_COND_TST{EQ,NE}
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
# /mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
# 0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
# 3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
# u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
# 3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
# c6RLQQ==
# =TMiE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Feb 2024 03:19:12 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu: (39 commits)
tcg/tci: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Add TCG_CT_CONST_CMP
tcg/s390x: Split constraint A into J+U
tcg/ppc: Support TCG_COND_TST{EQ,NE}
tcg/ppc: Add TCG_CT_CONST_CMP
tcg/ppc: Tidy up tcg_target_const_match
tcg/ppc: Use cr0 in tcg_to_bc and tcg_to_isel
tcg/ppc: Sink tcg_to_bc usage into tcg_out_bc
tcg/sparc64: Support TCG_COND_TST{EQ,NE}
tcg/sparc64: Pass TCGCond to tcg_out_cmp
tcg/sparc64: Hoist read of tcg_cond_to_rcond
tcg/i386: Use TEST r,r to test 8/16/32 bits
tcg/i386: Improve TSTNE/TESTEQ vs powers of two
tcg/i386: Support TCG_COND_TST{EQ,NE}
tcg/i386: Move tcg_cond_to_jcc[] into tcg_out_cmp
tcg/i386: Pass x86 condition codes to tcg_out_cmov
tcg/arm: Support TCG_COND_TST{EQ,NE}
tcg/arm: Split out tcg_out_cmp()
tcg/aarch64: Generate CBNZ for TSTNE of UINT32_MAX
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Requests that complete in an IOThread use irqfd to notify the guest
while requests that complete in the main loop thread use the traditional
qdev irq code path. The reason for this conditional is that the irq code
path requires the BQL:
if (s->ioeventfd_started && !s->ioeventfd_disabled) {
virtio_notify_irqfd(vdev, req->vq);
} else {
virtio_notify(vdev, req->vq);
}
There is a corner case where the conditional invokes the irq code path
instead of the irqfd code path:
static void virtio_blk_stop_ioeventfd(VirtIODevice *vdev)
{
...
/*
* Set ->ioeventfd_started to false before draining so that host notifiers
* are not detached/attached anymore.
*/
s->ioeventfd_started = false;
/* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */
blk_drain(s->conf.conf.blk);
During blk_drain() the conditional produces the wrong result because
ioeventfd_started is false.
Use qemu_in_iothread() instead of checking the ioeventfd state.
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-15394
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240122172625.415386-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit d3f6f294ae ("virtio-blk: always set
ioeventfd during startup") has made virtio_blk_start_ioeventfd() always
kick the virtqueue (set the ioeventfd), regardless of whether the BB is
drained. That is no longer necessary, because attaching the host
notifier will now set the ioeventfd, too; this happens either
immediately right here in virtio_blk_start_ioeventfd(), or later when
the drain ends, in virtio_blk_ioeventfd_attach().
With event_notifier_set() removed, the code becomes the same as the one
in virtio_blk_ioeventfd_attach(), so we can reuse that function.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-4-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of commit 38738f7dbb ("virtio-scsi:
don't waste CPU polling the event virtqueue"), we only attach an io_read
notifier for the virtio-scsi event virtqueue instead, and no polling
notifiers. During operation, the event virtqueue is typically
non-empty, but none of the buffers are intended to be used immediately.
Instead, they only get used when certain events occur. Therefore, it
makes no sense to continuously poll it when non-empty, because it is
supposed to be and stay non-empty.
We do this by using virtio_queue_aio_attach_host_notifier_no_poll()
instead of virtio_queue_aio_attach_host_notifier() for the event
virtqueue.
Commit 766aa2de0f ("virtio-scsi: implement
BlockDevOps->drained_begin()") however has virtio_scsi_drained_end() use
virtio_queue_aio_attach_host_notifier() for all virtqueues, including
the event virtqueue. This can lead to it being polled again, undoing
the benefit of commit 38738f7dbb.
Fix it by using virtio_queue_aio_attach_host_notifier_no_poll() for the
event virtqueue.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Fixes: 766aa2de0f
("virtio-scsi: implement BlockDevOps->drained_begin()")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blkio_alloc_mem_region() requires that the requested buffer size is a
multiple of the memory-alignment property. If it isn't, the allocation
fails with a return value of -EINVAL.
Fix the call in blkio_resize_bounce_pool() to make sure the requested
size is properly aligned.
I observed this problem with vhost-vdpa, which requires page aligned
memory. As the virtio-blk device behind it still had 512 byte blocks, we
got bs->bl.request_alignment = 512, but actually any request that needed
a bounce buffer and was not aligned to 4k would fail without this fix.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131173140.42398-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU's coding style generally forbids C99 mixed declarations.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206140410.65650-1-stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If something goes wrong causing the iotests not to cleanup their
temporary directory, it is useful if the dir had an identifying
name to show what is to blame.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240205155158.1843304-1-berrange@redhat.com>
Revieved-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an instance of the 'TestEnv' class will create a temporary
directory. This dir is only deleted, however, in the __exit__ handler
invoked by a context manager.
In dry-run mode, we don't use the TestEnv via a context manager, so
were leaking the temporary directory. Since meson invokes 'check'
5 times on each configure run, developers /tmp was filling up with
empty temporary directories.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240205154019.1841037-1-berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
scsi_device_for_each_req_async() currently does not provide any way to
be awaited. One of its callers is scsi_device_purge_requests(), which
therefore currently does not guarantee that all requests are fully
settled when it returns.
We want all requests to be settled, because scsi_device_purge_requests()
is called through the unrealize path, including the one invoked by
virtio_scsi_hotunplug() through qdev_simple_device_unplug_cb(), which
most likely assumes that all SCSI requests are done then.
In fact, scsi_device_purge_requests() already contains a blk_drain(),
but this will not fully await scsi_device_for_each_req_async(), only the
I/O requests it potentially cancels (not the non-I/O requests).
However, we can have scsi_device_for_each_req_async() increment the BB
in-flight counter, and have scsi_device_for_each_req_async_bh()
decrement it when it is done. This way, the blk_drain() will fully
await all SCSI requests to be purged.
This also removes the need for scsi_device_for_each_req_async_bh() to
double-check the current context and potentially re-schedule itself,
should it now differ from the BB's context: Changing a BB's AioContext
with a root node is done through bdrv_try_change_aio_context(), which
creates a drained section. With this patch, we keep the BB in-flight
counter elevated throughout, so we know the BB's context cannot change.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202144755.671354-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since AioContext locks have been removed, a BlockBackend's AioContext
may really change at any time (only exception is that it is often
confined to a drained section, as noted in this patch). Therefore,
blk_get_aio_context() cannot rely on its root node's context always
matching that of the BlockBackend.
In practice, whether they match does not matter anymore anyway: Requests
can be sent to BDSs from any context, so anyone who requests the BB's
context should have no reason to require the root node to have the same
context. Therefore, we can and should remove the assertion to that
effect.
In addition, because the context can be set and queried from different
threads concurrently, it has to be accessed with atomic operations.
Buglink: https://issues.redhat.com/browse/RHEL-19381
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202144755.671354-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The aio_co_reschedule_self() API is designed to avoid the race
condition between scheduling the coroutine in another AioContext and
yielding.
The QMP dispatch code uses the open-coded version that appears
susceptible to the race condition at first glance:
aio_co_schedule(qemu_get_aio_context(), qemu_coroutine_self());
qemu_coroutine_yield();
The code is actually safe because the iohandler and qemu_aio_context
AioContext run under the Big QEMU Lock. Nevertheless, set a good example
and use aio_co_reschedule_self() so it's obvious that there is no race.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-6-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VirtIOBlock::rq field has had the type void * since its introduction
in commit 869a5c6df1 ("Stop VM on error in virtio-blk. (Gleb
Natapov)").
Perhaps this was done to avoid the forward declaration of
VirtIOBlockReq.
Hanna Czenczek <hreitz@redhat.com> pointed out the missing type. Specify
the actual type because there is no need to use void * here.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-5-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Czenczek <hreitz@redhat.com> noted that the array index in
virtio_blk_dma_restart_cb() is not bounds-checked:
g_autofree VirtIOBlockReq **vq_rq = g_new0(VirtIOBlockReq *, num_queues);
...
while (rq) {
VirtIOBlockReq *next = rq->next;
uint16_t idx = virtio_get_queue_index(rq->vq);
rq->next = vq_rq[idx];
^^^^^^^^^^
The code is correct because both rq->vq and vq_rq[] depend on
num_queues, but this is indirect and not 100% obvious. Add an assertion.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not possible to instantiate a virtio-blk device with 0 virtqueues.
The following check is located in ->realize():
if (!conf->num_queues) {
error_setg(errp, "num-queues property must be larger than 0");
return;
}
Later on we access s->vq_aio_context[0] under the assumption that there
is as least one virtqueue. Hanna Czenczek <hreitz@redhat.com> noted that
it would help to show that the array index is already valid.
Add an assertion to document that s->vq_aio_context[0] is always
safe...and catch future code changes that break this assumption.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hanna Czenczek <hreitz@redhat.com> noticed that the safety of
`vq_aio_context[vq->value] = ctx;` with user-defined vq->value inputs is
not obvious.
The code is structured in validate() + apply() steps so input validation
is there, but it happens way earlier and there is nothing that
guarantees apply() can only be called with validated inputs.
This patch moves the validate() call inside the apply() function so
validation is guaranteed. I also added the bounds checking assertion
that Hanna suggested.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240206190610.107963-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It turns out that we may not be able to enable this test even for the
upcoming v9.0. Document what we're still missing.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The new build-previous-qemu job relies on QEMU release tag being present,
while that may not be always true for personal git repositories since by
default tag is not pushed. The job can fail on those CI kicks, as reported
by Peter Maydell.
Fix it by fetching the tags remotely from the official repository, as
suggested by Dan.
[1] https://lore.kernel.org/r/ZcC9ScKJ7VvqektA@redhat.com
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Recently we introduced cross-binary migration test. It's always wanted
that migration-test uses stable guest ABI for both QEMU binaries in this
case, so that both QEMU binaries will be compatible on the migration
stream with the cmdline specified.
Switch to a static gic version "3" rather than using version "max", so that
GIC should be stable now across any future QEMU binaries for migration-test.
Here the version can actually be anything as long as the ABI is stable. We
choose "3" because it's the majority of what we already use in QEMU while
still new enough: "git grep gic-version=3" shows 6 hit, while version 4 has
no direct user yet besides "max".
Note that even with this change, aarch64 won't be able to work yet with
migration cross binary test, but then the only missing piece will be the
stable CPU model.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240207005403.242235-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
It is possible that one of the multifd channels fails to be created at
multifd_new_send_channel_async() while the rest of the channel
creation tasks are still in flight.
This could lead to multifd_save_cleanup() executing the
qemu_thread_join() loop too early and not waiting for the threads
which haven't been created yet, leading to the freeing of resources
that the newly created threads will try to access and crash.
Add a synchronization point after which there will be no attempts at
thread creation and therefore calling multifd_save_cleanup() past that
point will ensure it properly waits for the threads.
A note about performance: Prior to this patch, if a channel took too
long to be established, other channels could finish connecting first
and already start taking load. Now we're bounded by the
slowest-connecting channel.
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
During multifd channel creation (multifd_send_new_channel_async) when
TLS is enabled, the multifd_channel_connect function is called twice,
once to create the TLS handshake thread and another time after the
asynchrounous TLS handshake has finished.
This creates a slightly confusing call stack where
multifd_channel_connect() is called more times than the number of
channels. It also splits error handling between the two callers of
multifd_channel_connect() causing some code duplication. Lastly, it
gets in the way of having a single point to determine whether all
channel creation tasks have been initiated.
Refactor the code to move the reentrancy one level up at the
multifd_new_send_channel_async() level, de-duplicating the error
handling and allowing for the next patch to introduce a
synchronization point common to all the multifd channel creation,
regardless of TLS.
Note that the previous code would never fail once p->c had been set.
This patch changes this assumption, which affects refcounting, so add
comments around object_unref to explain the situation.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently have an unfavorable situation around multifd channels
creation and the migration thread execution.
We create the multifd channels with qio_channel_socket_connect_async
-> qio_task_run_in_thread, but only connect them at the
multifd_new_send_channel_async callback, called from
qio_task_complete, which is registered as a glib event.
So at multifd_send_setup() we create the channels, but they will only
be actually usable after the whole multifd_send_setup() calling stack
returns back to the main loop. Which means that the migration thread
is already up and running without any possibility for the multifd
channels to be ready on time.
We currently rely on the channels-ready semaphore blocking
multifd_send_sync_main() until channels start to come up and release
it. However there have been bugs recently found when a channel's
creation fails and multifd_send_cleanup() is allowed to run while
other channels are still being created.
Let's start to organize this situation by moving the
multifd_send_setup() call into the migration thread. That way we
unblock the main-loop to dispatch the completion callbacks and
actually have a chance of getting the multifd channels ready for when
the migration thread needs them.
The next patches will deal with the synchronization aspects.
Note that this takes multifd_send_setup() out of the BQL.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-5-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Hide the error handling inside multifd_send_setup to make it cleaner
for the next patch to move the function around.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We currently only need p->running to avoid calling qemu_thread_join()
on a non existent thread if the thread has never been created.
However, there are at least two bugs in this logic:
1) On the sending side, p->running is set too early and
qemu_thread_create() can be skipped due to an error during TLS
handshake, leaving the flag set and leading to a crash when
multifd_send_cleanup() calls qemu_thread_join().
2) During exit, the multifd thread clears the flag while holding the
channel lock. The counterpart at multifd_send_cleanup() reads the flag
outside of the lock and might free the mutex while the multifd thread
still has it locked.
Fix the first issue by setting the flag right before creating the
thread. Rename it from p->running to p->thread_created to clarify its
usage.
Fix the second issue by not clearing the flag at the multifd thread
exit. We don't have any use for that.
Note that these bugs are straight-forward logic issues and not race
conditions. There is still a gap for races to affect this code due to
multifd_send_cleanup() being allowed to run concurrently with the
thread creation loop. This issue is solved in the next patches.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 2964714015 ("migration/tls: add support for multifd tls-handshake")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Reported-by: chenyuhui5@huawei.com
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We're currently leaking the resources of the TLS thread by not joining
it and also overwriting the p->thread pointer altogether.
Fixes: a1af605bd5 ("migration/multifd: fix hangup with TLS-Multifd due to blocking handshake")
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240206215118.6171-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The commit in the fixes line mistakenly modified the channels and
transport compatibility check logic so it now checks multi-channel
support only for socket transport type.
Thus, running multifd migration using a transport other than socket that
is incompatible with multi-channels (such as "exec") would lead to a
segmentation fault instead of an error message.
For example:
(qemu) migrate_set_capability multifd on
(qemu) migrate -d "exec:cat > /tmp/vm_state"
Segmentation fault (core dumped)
Fix it by checking multi-channel compatibility for all transport types.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: d95533e1cd ("migration: modify migration_channels_and_uri_compatible() for new QAPI syntax")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240125162528.7552-2-avihaih@nvidia.com
Signed-off-by: Peter Xu <peterx@redhat.com>
make vm-build-freebsd fails with:
ld: error: undefined symbol: inotify_init1
>>> referenced by filemonitor-inotify.c:183 (../src/util/filemonitor-inotify.c:183)
>>> util_filemonitor-inotify.c.o:(qemu_file_monitor_new) in archive libqemuutil.a
On FreeBSD the inotify functions are defined in libinotify.so. Add it
to the dependencies.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240206002344.12372-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Unlike on Linux, on FreeBSD renaming a file when the destination
already exists results in an IN_DELETE event for that existing file:
$ FILEMONITOR_DEBUG=1 build/tests/unit/test-util-filemonitor
Rename /tmp/test-util-filemonitor-K13LI2/fish/one.txt -> /tmp/test-util-filemonitor-K13LI2/two.txt
Event id=200000000 event=2 file=one.txt
Queue event id 200000000 event 2 file one.txt
Queue event id 100000000 event 2 file two.txt
Queue event id 100000002 event 2 file two.txt
Queue event id 100000000 event 0 file two.txt
Queue event id 100000002 event 0 file two.txt
Event id=100000000 event=0 file=two.txt
Expected event 0 but got 2
This difference in behavior is not expected to break the real users, so
teach the test to accept it.
Suggested-by: "Daniel P. Berrange" <berrange@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240206002344.12372-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
