Some structures in virtio-9p.h have been unused since 2011 when relevant
functions switched to use coroutines.
The declaration of pdu_packunpack and function do_pdu_unpack are
useless.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The deleted file only contained V9fsConf which wasn't virtio specific.
Merge that to the general header of 9pfs.
Fixed header inclusions as I went along.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
These three files are not virtio specific. Rename them to generic
names.
Fix comments and header inclusion in various files.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
These two files are not virtio specific. Rename them to use generic
names.
Fix includes in various C files. Change define guards and comments
in header files.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Those two files are not virtio specific. Rename them to use generic
names.
Fix includes in various C files. Change define guards and comments
in header files.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This file is not virtio specific. Rename it to use generic name.
Fix comment and remove unneeded inclusion of virtio.h.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This file is not virtio specific. Rename it to use generic name.
Fix comment and remove unneeded inclusion of virtio.h.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This file is not virtio specific. Rename it to use generic name.
Fix comment and remove unneeded inclusion of virtio.h.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Those two files are not virtio specific. Rename them to use generic
names.
Fix includes in various C files. Change define guards and comments in
header files.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Set the MicroBlaze CPU version to 8.10.a avoiding a runtime
warning due to an unset CPU version.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Set the MicroBlaze CPU version to 7.10.d avoiding a runtime
warning due to an unset CPU version.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJWjmYNAAoJEFvCxW+uDzIfSycH/An/L9tDFXtoC/W7Dq7/cKQw
7AWhskcfgCxxo0DoqnyHc6JKgONr8Jv15Vf7PTMM23KHioCX5wEgH52mOT5bKXDy
RnGG5qe4rj5A0i48kRZTG0ryjcKHra5I08UsznljGROmp5/fjLXAG1QEgrKKGXGn
kQyWZ46g8vka+MBKtetNipFForimIWOWjVO54neb7kwLMV2yiE8gaD4oAgJDmgSN
dHXB6rxCpBcnjdYCuri/9E1hVZmv7GmUH5e3cbD/COJu8ZFHASqXvtAih786vQa0
Fj441hO1WToi8PrrZBv76UxUton06O1+QvYZsCMf073vEyQKUhyHrYpd2hpWFQI=
=zyNj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Thu 07 Jan 2016 13:20:13 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
* remotes/mcayland/tags/qemu-sparc-signed:
target-sparc: implement NPT timer bit
sun4u: split NPT and INT_DIS accesses between timer and compare registers
sun4u: split out NPT and INT_DIS into separate CPUTimer fields
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the NPT bit is set in the timer register, all non-supervisor read accesses
to the register should fail with a privilege exception.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Accesses to the timer register high bit should only set NPT, whilst accesses
to the timer compare register high bit should only set INT_DIS. This fixes
issues with the timer being unexpectedly disabled whilst trying to boot
FreeBSD SPARC64.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently there is confusion between use of these bits for the timer and timer
compare registers (while they both have the same value, the behaviour is
different). Split into two separate CPUTimer fields so we can always reference
the correct value.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Patches that change tracetool can break the build if old build output
files are lying around.
This happens because the Makefile does not specify dependencies on
tracetool. The build will use old object files that do not match the
current source code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Makefile uses intermediate timestamp files to avoid rebuilding if
tracetool output is unchanged.
Timestamps are implemented incorrectly. This was fixed for rules.mak in
commit 4b25966ab9 ("rules.mak: cleanup
config generation rules") but never fixed in trace/Makefile.objs.
The problem with the old timestamp implementation was that make doesn't
notice the updated file modification time until the next time it is run.
It was necessary to run make twice in a row to achieve a full rebuild.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit c8ee0a4 introduced new events containing PRIx64 constants without
including the % prefix in the preceding string. This results in a compile
error during build if --enable-trace-backends is passed to configure.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450566522-6003-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some functions was moved from block.c to block/io.c, so the trace-events file should reflect that change.
Signed-off-by: Qinghua Jin <qhjin_dev@163.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ACPI aml files traditionally have been managed in the seabios repo.
In qemu version 2.0 we've switched over to have qemu generate the
acpi tables and provide them to the firmware via fw_cfg.
The old aml files are still there and used for old machine types.
Well, actually the q35 file only, the piix4 version is compiled into
seabios (unless built with CONFIG_ACPI_DSDT=n) and is there for
reference only.
The aml files havn't been touched for a long time, and given that
new features requiring acpi changes are typically only added to new
machine types this is unlikely to change in the future. So stop
updating them.
That allows to cleanup things a bit on the seabios side in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Highlights / user visible changes in seabios:
* boot menu key is ESC now.
* virtio 1.0 support.
* sdcard support.
* fw_cfg dma suport.
* usual share of bugfixes ;)
In vgabios:
* Emulates leal instruction. Works around a bug in old x86emu versions,
which makes old xorg vesa drivers work (RHEL-5 for example).
full shortlog rel-1.8.2..rel-1.9.0
----------------------------------
Ameya Palande (1):
x86: add barrier to read{b,w,l} and write{b,w,l} functions
Andreas Färber (1):
checkrom: Fix typo in error message
Chen Fan (1):
pci: enable SERR# for error forwarding in bridge control register
Gerd Hoffmann (28):
vga: simplify vga builds
vga: rework virtio-vga support
vga: add virtio-vga to kconfig
pci: allow to loop over capabilities
virtio: run drivers in 32bit mode
virtio: add struct vp_device
virtio: pass struct pci_device to vp_init_simple
virtio: add version 1.0 structs and #defines
virtio: add version 0.9.5 struct
virtio: find version 1.0 virtio capabilities
virtio: create vp_cap struct for legacy bar
virtio: add read/write functions and macros
virtio: make features 64bit, support version 1.0 features
virtio: add version 1.0 support to vp_{get,set}_status
virtio: add version 1.0 support to vp_get_isr
virtio: add version 1.0 support to vp_reset
virtio: add version 1.0 support to vp_notify
virtio: remove unused vp_del_vq
virtio: add version 1.0 support to vp_find_vq
virtio-scsi: fix initialization for version 1.0
virtio-blk: fix initialization for version 1.0
virtio: use version 1.0 if available (flip the big switch)
virtio: also probe version 1.0 pci ids
virtio: legacy cleanup
virtio-blk: 32bit cleanup
virtio-scsi: 32bit cleanup
virtio-ring: 32bit cleanup
virtio-pci: use high memory for rings
Julius Werner (1):
xhci: Count new Max Scratchpad Bufs bits from XHCI 1.1
Kevin O'Connor (126):
docs: add page for SeaVGABIOS
docs: Add page describing the patch contribution process
docs: Add page on available CBFS/fw_cfg runtime config files
docs: Prefer triple backticks to multiple lines with single backticks
smp: Fix smp race introduced in 0673b787
docs: Note release date of 1.8.1
vgabios: On bda_save_restore() the saved vbe_mode also has flags in it
vgabios: Don't use extra stack if it appears a modern OS is in use
docs: Clarify that pci-optionrom-exec doesn't apply to roms in cbfs
checkstack: Replace function information tuple with class
checkstack: Simplify yield calculations
checkstack: Prefer passing "function" class instead of function address
smbios: Use integer signature instead of string signature
vgabios: Don't use "smsww" instruction - it confuses x86emu
vgabios: Add config option for assembler fixups
vgabios: Emulate "leal" instruction
checkstack: Minor - continue if not a regular asm line
Don't forward declare functions with "inline" in headers
build: Support "make VERSION=xyz" to override the default build version
tcg: Use seabios setup()/prepboot() calling convention for tcg
build: CONFIG_VGA_FIXUP_ASM should depend on CONFIG_BUILD_VGABIOS
bootorder: Update "extra pci root" buses bootorder format to match qemu
Make sure all code checks for malloc failures
docs: Note release date of 1.8.2
block: Split process_op() command dispatch up into multiple functions
block: Introduce default_process_op() with common command handling codes
block: Route scsi style commands through 'struct disk_op_s'
blockcmd: Introduce scsi_fill_cmd()
ata: Handle ATA ATAPI drives directly via 'struct disk_op_s' requests
ahci: Handle AHCI ATAPI drives directly via 'struct disk_op_s' requests
usb-msc: Handle USB drives directly via 'struct disk_op_s' requests
usb-uas: Handle USB drives directly via 'struct disk_op_s' requests
lsi-scsi: Handle LSI drives directly via 'struct disk_op_s' requests
esp-scsi: Handle ESP drives directly via 'struct disk_op_s' requests
megasas: Handle Megasas drives directly via 'struct disk_op_s' requests
virtio-scsi: Handle virtio drives directly via 'struct disk_op_s' requests
pvscsi: Move pvscsi_fill_req() code into pvscsi_cmd()
pvscsi: Handle pvscsi drives directly via 'struct disk_op_s' requests
blockcmd: Remove unused scsi_process_op() and cdb_cmd_data()
blockcmd: Convert cdb_is_read() to scsi_is_read()
block: Rename process_XXX_op() functions to XXX_process_op()
coreboot: Try to auto-detect if the CBFS anchor pointer is a relative pointer
ps2: Support mode for polling the PS2 port instead of using irqs
ata: Make sure "chanid" is relative to PCI device for bootorder file
Don't enable interrupts prior to IVT and PIC setup
ps2: Don't wait 100ms to discard possible extra reset receive byte
timer: Delay timestamp counter init until after pmtimer is probed
timer: Add CONFIG_TSC_TIMER build option to disable the CPU TSC timer
ramdisk: Allow ramdisk support (CONFIG_FLASH_FLOPPY) under QEMU
Minor - move declaration of CDRom_locks to code that uses it
smm: ignore bits 16,18-31 of SMM revision ID at runtime too
vgafb: Minor - move gfx_common() variables outside of switch statement
sdcard: Check if card is present before sending commands to card
sdcard: Implement controller frequency setting according to sdhci spec
sdcard: Make sure controller support 3.3V before enabling it
sdcard: Set timeout control register during init (to max allowed timeout)
sdcard: Improve SD card initialization command sequence
sdcard: Add proper delays during card power up
mptable: Don't create mptable if it is very large
optionroms: Don't run option rom on PCI bar if CBFS/fw_cfg version exists
edd: Pass the segment/offset from int 1348 calls using a 'struct segoff_s'
edd: Reduce parameters to fill_generic_edd()
Move CanInterrupt check to check_irqs()
Call cpu_relax() if yielding prior to interrupts being enabled
sdcard: Fix typo - use sdcard_pio() instead of sdcard_pio_app()
sdcard: Fill command bits according to spec
sdcard: Support SDHCI v3.00 spec clock setting
sdcard: Move power setup to new function sdcard_set_power()
sdcard: Power controller up to maximum voltage supported
sdcard: Power down controller on failure
sdcard: The card should never be in a busy state at start of sdcard_pio()
sdcard: Implement timeout on every block read in sdcard_pio_transfer()
sdcard: Rename waitw() to sdcard_waitw() and simplify
sdcard: Perform a controller reset at start of init
sdcard: Check for error events during sdcard_pio()
sdcard: Initial support for MMC cards
sdcard: Allow the sdcard driver to run on real hardware
rtc: Support disabling the RTC timer irq support
Add minimal support for machines without hardware interrupts
ps2: Eliminate "etc/ps2-poll-only"; use CONFIG_HARDWARE_IRQ instead
sdcard: Allow sdcard addresses to be specified in CBFS files
xhci: Minor - add USB port type comments to xhci_hub_reset()
docs: Don't use an add-symbol-file offset when describing gdb debugging
rtc: Disable NMI in rtc_mask()
sdcard: Move sdcard_set_frequency()/sdcard_set_power() in sdcard.c
sdcard: Move frequency setting into sdcard_card_setup()
sdcard: Move drive registration to sdcard_card_setup()
sdcard: Turn card_type into a bitmap and store if card is MMC type
sdcard: Display sdcard product name in boot menu
sdcard: Obtain card capacity and report it on the boot menu
megasas: Use outl() on MFI_IDB register
minor - correct spelling error in comment
Simplify transition16/32 assembler code
docs: Minor - add "code relocation" link to "Execution and code flow" document
Unify smm/sloppy variants of call32_prep/post and call16_helper
Rename Call32Data to Call16Data
Unify inline assembler in variants of call16 functions
Unify call32_sloppy() and call32()
Use transition32_nmi_off from call32() and call16_back()
Consolidate code16*() functions
Always enable caching on transition32; backup/restore cr0 on call32
e820: Introduce e820_remove() and avoid exporting E820_HOLE
e820: Rename memmap.c to e820map.c and use consistent "e820_" prefix
e820: Update debugging messages to report 64bit values
virtio: Simplify vring alignment code
virtio: Move standard definitions from virtio-ring.h to standard headers
malloc: Use consistent naming for internal low-level "alloc" functions
malloc: Introduce common helper alloc_new_detail()
malloc: Add warning if free() called on invalid memory
malloc: Don't mix virtual and physical addresses
memmap: Introduce SYMBOL() macro to access linker script symbols
build: Rework version generation; don't allow make version override
build: Report gcc and binutils versions in debug log
build: Generate "reproducible" version strings on "clean" builds
stacks: Use macro wrappers for call32() and stack_hop_back()
malloc: Rename csm_malloc_preinit() to malloc_csm_preinit()
build: Be more permissive in buildversion.py tool version scan
docs: Document 'make EXTRAVERSION=xyz' and scripts/tarball.sh
build: Allow official tarball builds to be considered "clean"
coreboot: Minor - avoid K&R style function declaration
biostables: Minor - fix incorrect indentation
virtio: Minor - replace tab characters with space
docs: Minor - replace seavgabios text in Build_overview.md with link
buildversion: Avoid subprocess.check_output() as that requires python2.7
buildversion: Add debugging messages
docs: Note v1.9.0 release
Kyösti Mälkki (1):
PCI SDHCI driver: Fix base address
Magnus Granberg (1):
build: use -fstack-check=no when available
Marc Marí (1):
Add QEMU fw_cfg DMA interface
Marcel Apfelbaum (2):
fw/pci: scan all buses if extraroots romfile is present
fw/pci: map memory and IO regions for multiple pci root buses
Paolo Bonzini (4):
boot.c: delay exiting boot if menu key is ESC
boot: switch default menu key to ESC
smm: ignore bits 16,18-31 of SMM revision ID
smm: fix outl argument order
Paulo Alcantara (1):
ich9: initialise RCBA register through LPC interface
Quan Xu (1):
make SeaBios compatible with Xen vTPM.
Stefan Berger (9):
Add an implementation of a TPM TIS driver
Implementation of the TCG BIOS extensions
Support for BIOS interrupt handler
Add 'measurement' code to the BIOS
tpm: Introduce a #define for command tag
tpm: Be consistent with array sizes in tcgbios.c
tpm: clean up parameters to build_and_send_cmd
tpm: Clean up in tcgbios.h
tpm: Move call to tpm_option_rom into init_optionrom
Stefan Weil (2):
megasas: Fix outw, outl argument order
Fix typos found by codespell
Vladimir Serbinenko (3):
ahci: Ignore max_ports.
Link rom.o with -N option.
Add multiboot support.
tpearson@raptorengineeringinc.com (1):
Add an option to only execute option ROMs contained in CBFS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlZ6ffwACgkQAvw66wEB28L59wCdEbXdeiE8SPV4rI/PIdvnUtAX
BmAAn2MPJ07PcUXmu3jaj1ZEmjoEGJ+R
=DucP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Fix a 2.5 regression.
# gpg: Signature made Wed 23 Dec 2015 10:57:00 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
virtio-9p: use accessor to get thread_pool
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JkVB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-fixes-2015-12-23-1' into staging
Merge misc I/O channel fixes
# gpg: Signature made Wed 23 Dec 2015 10:54:52 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-io-fixes-2015-12-23-1:
io: fix stack allocation when sending of file descriptors
io: fix setting of QIO_CHANNEL_FEATURE_FD_PASS on server connections
io: bind to loopback IP addrs in test suite
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pxb support for q35
nvdimm support
most of ipmi support
part of DSDT rewrite
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWeX6WAAoJECgfDbjSjVRp08kH/0YwnLl23evSIst67O5AthCm
IjTu7tbANtpadMq9YxU7Is+6QEi27C26pqy4CWgoirhsrjiY2jC5LVCZqhIhBEeJ
JFyAiYglJDMraHWyKG373lLEeQvNmEmFsxmULmV6cX2j1tsgyXCqdQs5DmRGnHno
L02W0p3EnEfUwYvnuyeuKmdw+ykiCxKt5zBYodSU6yPkFI34Ex/VBiwqt6nJ0hU1
xDNbmudN0GI/ckUezq0ko6AXPnmouiq0QPGVf0EXRaFQxwjbyb+f9zK+xmo/v2k3
5Mz3+otQ8i5cyunY9ziQf58WKMXY/CmerXXv4/gnfwz6EfdZZGsNc1niJcsXxDs=
=D7er
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, pc features
pxb support for q35
nvdimm support
most of ipmi support
part of DSDT rewrite
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 22 Dec 2015 16:47:18 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (55 commits)
acpi: extend aml_and() to accept target argument
acpi: extend aml_or() to accept target argument
acpi add aml_dma()
acpi: add aml_to_buffer()
acpi: add aml_to_hexstring()
acpi: extend aml_field() to support LockRule
acpi: add aml_lgreater()
acpi: add aml_lor()
acpi: add aml_sleep()
acpi: add aml_alias()
acpi: extend aml_shiftright() to accept target argument
acpi: add aml_to_integer()
acpi: add aml_call0() helper
acpi: add aml_decrement() and aml_subtract()
acpi: extend aml_add() to accept target argument
acpi: aml: add helper for Opcode Arg2 Arg2 [Dst] AML pattern
acpi: add aml_create_qword_field()
acpi: add aml_mutex(), aml_acquire(), aml_release()
acpi: add aml_lgreater_equal()
acpi: add aml_sizeof
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When reporting an incorrect key length for a cipher, we
mixed up the actual vs expected arguments.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The rebuild of qapi-types.c/h is not correctly triggered
when qapi/crypto.json is changed because it was missing
from the list of files in the qapi-modules variable.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QCryptoCipherAlgorithm and QCryptoCipherMode enums are
defined in the crypto/cipher.h header. In the future some
QAPI types will want to reference the hash enums, so move
the enum definition into QAPI too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QCryptoHashAlgorithm enum is defined in the crypto/hash.h
header. In the future some QAPI types will want to reference
the hash enums, so move the enum definition into QAPI too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a qcrypto_hash_digest_len() method which allows querying of
the raw digest size for a given hash algorithm.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Adds new methods to allow querying the length of the cipher
key, block size and initialization vectors.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When sending file descriptors over a socket, we have to
allocate a data buffer to hold the FDs in the scmsghdr.
Unfortunately we allocated the buffer on the stack inside
an if () {} block, but called sendmsg() outside the block.
So the stack bytes holding the FDs were liable to be
overwritten with other data. By luck this was not a problem
when sending 1 FD, but if sending 2 or more then it would
fail.
The fix is to simply move the variables outside the nested
'if' block. To keep valgrind quiet we also zero-initialize
the 'control' buffer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The aio_context_new() function does not allocate a thread pool. This is
deferred to the first call to the aio_get_thread_pool() accessor. It is
hence forbidden to access the thread_pool field directly, as it may be
NULL. The accessor *must* be used always.
Fixes: ebac1202c9
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The QIO_CHANNEL_FEATURE_FD_PASS feature flag is set in the
qio_channel_socket_set_fd() method, however, this only deals
with client side connections.
To ensure server side connections also have the feature flag
set, we must set it in qio_channel_socket_accept() too. This
also highlighted a typo fix where the code updated the
sockaddr struct in the wrong object instance.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The test suite currently binds to 0.0.0.0 or ::, which covers
all interfaces of the machine. It is bad practice for test
suite to open publically accessible ports on a machine, so
switch to use loopback addrs 127.0.0.1 or ::1.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
