Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We do not trace guest atomic accesses. Fix it.
Tested with a modified atomic_add-bench so that it executes
a deterministic number of instructions, i.e. fixed seeding,
no threading and fixed number of loop iterations instead
of running for a certain time.
Before:
- With parallel_cpus = false (no clone syscall so it is never set to true):
220070 memory accesses
- With parallel_cpus = true (hard-coded):
212105 memory accesses <-- we're not tracing the atomics!
After:
220070 memory accesses regardless of parallel_cpus.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-6-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These will be used by the following commit.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-5-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow us to trace 16B-long memory accesses.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-4-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add some defines for the mem_info bits, simplify
trace_mem_build_info, and also simplify trace_mem_get_info
by making it a wrapper around trace_mem_build_info.
This paves the way for increasing size_shift by one bit.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-3-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
trace_mem_build_info expects a size_shift for its first argument. Fix it.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-2-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* aspeed: set APB clocks correctly (fixes slowdown on palmetto)
* smmuv3: cache config data and TLB entries
* v7m/v8m: support read/write from MPU regions smaller than 1K
* various: clean up logging/debug messages
* xilinx_spips: Make dma transactions as per dma_burst_size
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZiOR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180626' into staging
target-arm queue:
* aspeed: set APB clocks correctly (fixes slowdown on palmetto)
* smmuv3: cache config data and TLB entries
* v7m/v8m: support read/write from MPU regions smaller than 1K
* various: clean up logging/debug messages
* xilinx_spips: Make dma transactions as per dma_burst_size
# gpg: Signature made Tue 26 Jun 2018 17:55:46 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180626: (32 commits)
aspeed/timer: use the APB frequency from the SCU
aspeed: initialize the SCU controller first
aspeed/scu: introduce clock frequencies
hw/arm/smmuv3: Add notifications on invalidation
hw/arm/smmuv3: IOTLB emulation
hw/arm/smmuv3: Cache/invalidate config data
hw/arm/smmuv3: Fix translate error handling
target/arm: Handle small regions in get_phys_addr_pmsav8()
target/arm: Set page (region) size in get_phys_addr_pmsav7()
tcg: Support MMU protection regions smaller than TARGET_PAGE_SIZE
hw/arm/stellaris: Use HWADDR_PRIx to display register address
hw/arm/stellaris: Fix gptm_write() error message
hw/net/smc91c111: Use qemu_log_mask(UNIMP) instead of fprintf
hw/net/smc91c111: Use qemu_log_mask(GUEST_ERROR) instead of hw_error
hw/net/stellaris_enet: Use qemu_log_mask(GUEST_ERROR) instead of hw_error
hw/net/stellaris_enet: Fix a typo
hw/arm/stellaris: Use qemu_log_mask(UNIMP) instead of fprintf
hw/arm/omap: Use qemu_log_mask(GUEST_ERROR) instead of fprintf
hw/arm/omap1: Use qemu_log_mask(GUEST_ERROR) instead of fprintf
hw/i2c/omap_i2c: Use qemu_log_mask(UNIMP) instead of fprintf
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The timer controller can be driven by either an external 1MHz clock or
by the APB clock. Today, the model makes the assumption that the APB
frequency is always set to 24MHz but this is incorrect.
The AST2400 SoC on the palmetto machines uses a 48MHz input clock
source and the APB can be set to 48MHz. The consequence is a general
system slowdown. The QEMU machines using the AST2500 SoC do not seem
impacted today because the APB frequency is still set to 24MHz.
We fix the timer frequency for all SoCs by linking the Timer model to
the SCU model. The APB frequency driving the timers is now the one
configured for the SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180622075700.5923-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The System Control Unit should be initialized first as it drives all
the configuration of the SoC and other device models.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180622075700.5923-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All Aspeed SoC clocks are driven by an input source clock which can
have different frequencies : 24MHz or 25MHz, and also, on the Aspeed
AST2400 SoC, 48MHz. The H-PLL (CPU) clock is defined from a
calculation using parameters in the H-PLL Parameter register or from a
predefined set of frequencies if the setting is strapped by hardware
(Aspeed AST2400 SoC). The other clocks of the SoC are then defined
from the H-PLL using dividers.
We introduce first the APB clock because it should be used to drive
the Aspeed timer model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180622075700.5923-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On TLB invalidation commands, let's call registered
IOMMU notifiers. Those can only be UNMAP notifiers.
SMMUv3 does not support notification on MAP (VFIO).
This patch allows vhost use case where IOTLB API is notified
on each guest IOTLB invalidation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1529653501-15358-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We emulate a TLB cache of size SMMU_IOTLB_MAX_SIZE=256.
It is implemented as a hash table whose key is a combination
of the 16b asid and 48b IOVA (Jenkins hash).
Entries are invalidated on TLB invalidation commands, either
globally, or per asid, or per asid/iova.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1529653501-15358-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's cache config data to avoid fetching and parsing STE/CD
structures on each translation. We invalidate them on data structure
invalidation commands.
We put in place a per-smmu mutex to protect the config cache. This
will be useful too to protect the IOTLB cache. The caches can be
accessed without BQL, ie. in IO dataplane. The same kind of mutex was
put in place in the intel viommu.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1529653501-15358-3-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In case the STE's config is "Bypass" we currently don't set the
IOMMUTLBEntry perm flags and the access does not succeed. Also
if the config is 0b0xx (Aborted/Reserved), decode_ste and
smmuv3_decode_config currently returns -EINVAL and we don't enter
the expected code path: we record an event whereas we should not.
This patch fixes those bugs and simplifies the error handling.
decode_ste and smmuv3_decode_config now return 0 if aborted or
bypassed config was found. Only bad config info produces negative
error values. In smmuv3_translate we more clearly differentiate
errors, bypass/smmu disabled, aborted and success cases. Also
trace points are differentiated.
Fixes: 9bde7f0674 ("hw/arm/smmuv3: Implement translate callback")
Reported-by: jia.he@hxt-semitech.com
Signed-off-by: jia.he@hxt-semitech.com
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1529653501-15358-2-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow ARMv8M to handle small MPU and SAU region sizes, by making
get_phys_add_pmsav8() set the page size to the 1 if the MPU or
SAU region covers less than a TARGET_PAGE_SIZE.
We choose to use a size of 1 because it makes no difference to
the core code, and avoids having to track both the base and
limit for SAU and MPU and then convert into an artificially
restricted "page size" that the core code will then ignore.
Since the core TCG code can't handle execution from small
MPU regions, we strip the exec permission from them so that
any execution attempts will cause an MPU exception, rather
than allowing it to end up with a cpu_abort() in
get_page_addr_code().
(The previous code's intention was to make any small page be
treated as having no permissions, but unfortunately errors
in the implementation meant that it didn't behave that way.
It's possible that some binaries using small regions were
accidentally working with our old behaviour and won't now.)
We also retain an existing bug, where we ignored the possibility
that the SAU region might not cover the entire page, in the
case of executable regions. This is necessary because some
currently-working guest code images rely on being able to
execute from addresses which are covered by a page-sized
MPU region but a smaller SAU region. We can remove this
workaround if we ever support execution from small regions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-4-peter.maydell@linaro.org
We want to handle small MPU region sizes for ARMv7M. To do this,
make get_phys_addr_pmsav7() set the page size to the region
size if it is less that TARGET_PAGE_SIZE, rather than working
only in TARGET_PAGE_SIZE chunks.
Since the core TCG code con't handle execution from small
MPU regions, we strip the exec permission from them so that
any execution attempts will cause an MPU exception, rather
than allowing it to end up with a cpu_abort() in
get_page_addr_code().
(The previous code's intention was to make any small page be
treated as having no permissions, but unfortunately errors
in the implementation meant that it didn't behave that way.
It's possible that some binaries using small regions were
accidentally working with our old behaviour and won't now.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-3-peter.maydell@linaro.org
Add support for MMU protection regions that are smaller than
TARGET_PAGE_SIZE. We do this by marking the TLB entry for those
pages with a flag TLB_RECHECK. This flag causes us to always
take the slow-path for accesses. In the slow path we can then
special case them to always call tlb_fill() again, so we have
the correct information for the exact address being accessed.
This change allows us to handle reading and writing from small
regions; we cannot deal with execution from the small region.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-2-peter.maydell@linaro.org
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180624040609.17572-17-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed in df3692e04b.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180624040609.17572-16-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw_error() finally calls abort(), but there is no need to abort here.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-14-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw_error() finally calls abort(), but there is no need to abort here.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180624040609.17572-13-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180624040609.17572-12-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
TCMI_VERBOSE is no more used, drop the OMAP_8/16/32B_REG macros.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180624040609.17572-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds Cedric as the maintainer, with Andrew and I as reviewers, for
the ASPEED boards and the peripherals we have developed.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 20180625140055.32223-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qspi dma has a burst length of 64 bytes, So limit the transactions w.r.t
dma-burst-size property.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1529660880-30376-1-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These COMs are hard to find, and the companie dropped the support
few years ago.
Per the "Gumstix Product Changes, Known Issues, and EOL" pdf:
- Phasing out: PXA270-based Verdex product line
September 2012
- Phasing out: PXA255-based Basix & Connex
September 2009
However there are still booting SD card image availables, very
convenient to stress test the QEMU SD card implementation.
Therefore I volunteer to keep an eye on this file, while it
is useful for testing.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180606144706.29732-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also handle the fake transfers for dummy bytes in this setup
routine. It will be useful when we activate MMIO execution.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180612065716.10587-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only the flash type is strapped by HW. The 4BYTE mode is set by
firmware when the flash device is detected.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180612065716.10587-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When configured in dual I/O mode, address and data are sent in dual
mode, including the dummy byte cycles in between. Adapt the count to
the IO setting.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180612065716.10587-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit a8bff79e9f we added a definition to hw/virtio/virtio-gpu.h
for VIRTIO_GPU_CAPSET_VIRGL2, as a workaround for it not yet being
in the Linux kernel headers. In commit 77d361b13c we updated our
kernel headers to a version which does define the macro, so we can
now remove our workaround.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180622173249.29963-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> CID 1393621: (OVERFLOW_BEFORE_WIDEN)
> Potentially overflowing expression "stride * s->height" with type "unsigned
> int" (32 bits, unsigned) is evaluated using +32-bit arithmetic, and then used
> in a context that expects an expression of type "hwaddr" (64 bits, unsigned).
Fix by changing stride from uint32_t to hwaddr.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180626083120.19515-1-kraxel@redhat.com
This makes sure the regions are properly cleaned when unplugging -device
seconday-vga.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180626060941.8326-1-kraxel@redhat.com
Sometimes SDL2 console can't be retrieved on events and scon variable
becomes NULL. This patch prevents processing of the events when the console
is not available.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Message-id: 20180626064729.18070.47600.stgit@pasha-VirtualBox
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes text and mouse event processing. These functions used
'key' field of the event instead of appropriate 'text', 'motion', 'button',
or 'wheel'.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Message-id: 20180626064017.17031.47954.stgit@pasha-VirtualBox
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for OpenGL ES to egl-helpers. Wire up the new option for
egl-headless and gtk UIs. egl-headless actually works fine. gtk hits a
not-yet implemented code path in libEGL when trying to use gles mode:
libEGL warning: FIXME: egl/x11 doesn't support front buffer rendering.
(This is mesa 17.2.3).
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Message-id: 20180618112141.23398-1-kraxel@redhat.com
* Add TOPOEXT feature to EPYC CPU model
* AMD's amd-ssbd and amd-no-ssbd CPUID features
* Removed unused CPUID flag names: ospke, osxsave
* Better formatting of '-cpu help'
-----BEGIN PGP SIGNATURE-----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=+6zK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2018-06-25
* Add TOPOEXT feature to EPYC CPU model
* AMD's amd-ssbd and amd-no-ssbd CPUID features
* Removed unused CPUID flag names: ospke, osxsave
* Better formatting of '-cpu help'
# gpg: Signature made Mon 25 Jun 2018 23:18:51 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Remove generic SMT thread check
i386: Enable TOPOEXT feature on AMD EPYC CPU
i386: Fix up the Node id for CPUID_8000_001E
i386: Allow TOPOEXT to be enabled on older kernels
i386: Define AMD's no SSB mitigation needed.
i386: define the AMD 'amd-ssbd' CPUID feature bit
i386: Remove ospke CPUID flag name
i386: Remove osxsave CPUID flag name
i386: display known CPUID features linewrapped, in alphabetical order
i386: improve sorting of CPU model names
i386: improve alignment of CPU model listing
i386: Add support for CPUID_8000_001E for AMD
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
