hw/dma/omap_dma: Use qemu_log_mask(GUEST_ERROR) instead of fprintf

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
Philippe Mathieu-Daudé 2018-06-26 17:50:40 +01:00 committed by Peter Maydell
parent f3724bf5e6
commit e26745d557

View File

@ -879,15 +879,18 @@ static int omap_dma_ch_reg_write(struct omap_dma_s *s,
ch->burst[0] = (value & 0x0180) >> 7;
ch->pack[0] = (value & 0x0040) >> 6;
ch->port[0] = (enum omap_dma_port) ((value & 0x003c) >> 2);
if (ch->port[0] >= __omap_dma_port_last)
printf("%s: invalid DMA port %i\n", __func__,
ch->port[0]);
if (ch->port[1] >= __omap_dma_port_last)
printf("%s: invalid DMA port %i\n", __func__,
ch->port[1]);
if (ch->port[0] >= __omap_dma_port_last) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA port %i\n",
__func__, ch->port[0]);
}
if (ch->port[1] >= __omap_dma_port_last) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA port %i\n",
__func__, ch->port[1]);
}
ch->data_type = 1 << (value & 3);
if ((value & 3) == 3) {
printf("%s: bad data_type for DMA channel\n", __func__);
qemu_log_mask(LOG_GUEST_ERROR,
"%s: bad data_type for DMA channel\n", __func__);
ch->data_type >>= 1;
}
break;
@ -1899,14 +1902,18 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
if (value & 2) /* SOFTRESET */
omap_dma_reset(s->dma);
s->ocp = value & 0x3321;
if (((s->ocp >> 12) & 3) == 3) /* MIDLEMODE */
fprintf(stderr, "%s: invalid DMA power mode\n", __func__);
if (((s->ocp >> 12) & 3) == 3) { /* MIDLEMODE */
qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA power mode\n",
__func__);
}
return;
case 0x78: /* DMA4_GCR */
s->gcr = value & 0x00ff00ff;
if ((value & 0xff) == 0x00) /* MAX_CHANNEL_FIFO_DEPTH */
fprintf(stderr, "%s: wrong FIFO depth in GCR\n", __func__);
if ((value & 0xff) == 0x00) { /* MAX_CHANNEL_FIFO_DEPTH */
qemu_log_mask(LOG_GUEST_ERROR, "%s: wrong FIFO depth in GCR\n",
__func__);
}
return;
case 0x80 ... 0xfff:
@ -1935,9 +1942,11 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
case 0x00: /* DMA4_CCR */
ch->buf_disable = (value >> 25) & 1;
ch->src_sync = (value >> 24) & 1; /* XXX For CamDMA must be 1 */
if (ch->buf_disable && !ch->src_sync)
fprintf(stderr, "%s: Buffering disable is not allowed in "
"destination synchronised mode\n", __func__);
if (ch->buf_disable && !ch->src_sync) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Buffering disable is not allowed in "
"destination synchronised mode\n", __func__);
}
ch->prefetch = (value >> 23) & 1;
ch->bs = (value >> 18) & 1;
ch->transparent_copy = (value >> 17) & 1;
@ -1947,9 +1956,11 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
ch->suspend = (value & 0x0100) >> 8;
ch->priority = (value & 0x0040) >> 6;
ch->fs = (value & 0x0020) >> 5;
if (ch->fs && ch->bs && ch->mode[0] && ch->mode[1])
fprintf(stderr, "%s: For a packet transfer at least one port "
"must be constant-addressed\n", __func__);
if (ch->fs && ch->bs && ch->mode[0] && ch->mode[1]) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: For a packet transfer at least one port "
"must be constant-addressed\n", __func__);
}
ch->sync = (value & 0x001f) | ((value >> 14) & 0x0060);
/* XXX must be 0x01 for CamDMA */
@ -1978,9 +1989,11 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
ch->endian_lock[0] =(value >> 20) & 1;
ch->endian[1] =(value >> 19) & 1;
ch->endian_lock[1] =(value >> 18) & 1;
if (ch->endian[0] != ch->endian[1])
fprintf(stderr, "%s: DMA endianness conversion enable attempt\n",
__func__);
if (ch->endian[0] != ch->endian[1]) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: DMA endianness conversion enable attempt\n",
__func__);
}
ch->write_mode = (value >> 16) & 3;
ch->burst[1] = (value & 0xc000) >> 14;
ch->pack[1] = (value & 0x2000) >> 13;
@ -1988,12 +2001,15 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
ch->burst[0] = (value & 0x0180) >> 7;
ch->pack[0] = (value & 0x0040) >> 6;
ch->translate[0] = (value & 0x003c) >> 2;
if (ch->translate[0] | ch->translate[1])
fprintf(stderr, "%s: bad MReqAddressTranslate sideband signal\n",
__func__);
if (ch->translate[0] | ch->translate[1]) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: bad MReqAddressTranslate sideband signal\n",
__func__);
}
ch->data_type = 1 << (value & 3);
if ((value & 3) == 3) {
printf("%s: bad data_type for DMA channel\n", __func__);
qemu_log_mask(LOG_GUEST_ERROR,
"%s: bad data_type for DMA channel\n", __func__);
ch->data_type >>= 1;
}
break;