Use the helper functions we have to read/write multi-byte values
in correct byte order.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-3-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 5dd58358a57048e5ceabf5c91c0544f4f56afdcd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move the offset calculation, do it once at the start of the function and
let the 'p' variable point directly to the memory location which should
be updated. This makes it simpler to update other buffers than
pfl->storage in an upcoming patch. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240108160900.104835-2-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 3b14a555fdb627ac091559ef5931c887d06590d8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both cryptodev_backend_set_throttle() and CryptoDevBackendClass::init()
can set their Error** argument. Do not ignore them, return early
on failure. Without that, running into another failure trips
error_setv()'s assertion. Use the ERRP_GUARD() macro as suggested
in commit ae7c80a7bd ("error: New macro ERRP_GUARD()").
Cc: qemu-stable@nongnu.org
Fixes: e7a775fd9f ("cryptodev: Account statistics")
Fixes: 2580b452ff ("cryptodev: support QoS")
Reviewed-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231120150418.93443-1-philmd@linaro.org>
(cherry picked from commit 484aecf2d3a75251b63481be2a0c3aef635002af)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For PC-relative translation blocks, env->eip changes during the
execution of a translation block, Therefore, QEMU must be able to
recover an instruction's PC just from the TranslationBlock struct and
the instruction data with. Because a TB will not span two pages, QEMU
stores all the low bits of EIP in the instruction data and replaces them
in x86_restore_state_to_opc. Bits 12 and higher (which may vary between
executions of a PCREL TB, since these only use the physical address in
the hash key) are kept unmodified from env->eip. The assumption is that
these bits of EIP, unlike bits 0-11, will not change as the translation
block executes.
Unfortunately, this is incorrect when the CS base is not aligned to a page.
Then the linear address of the instructions (i.e. the one with the
CS base addred) indeed will never span two pages, but bits 12+ of EIP
can actually change. For example, if CS base is 0x80262200 and EIP =
0x6FF4, the first instruction in the translation block will be at linear
address 0x802691F4. Even a very small TB will cross to EIP = 0x7xxx,
while the linear addresses will remain comfortably within a single page.
The fix is simply to use the low bits of the linear address for data[0],
since those don't change. Then x86_restore_state_to_opc uses tb->cs_base
to compute a temporary linear address (referring to some unknown
instruction in the TB, but with the correct values of bits 12 and higher);
the low bits are replaced with data[0], and EIP is obtained by subtracting
again the CS base.
Huge thanks to Mark Cave-Ayland for the image and initial debugging,
and to Gitlab user @kjliew for help with bisecting another occurrence
of (hopefully!) the same bug.
It should be relatively easy to write a testcase that performs MMIO on
an EIP with different bits 12+ than the first instruction of the translation
block; any help is welcome.
Fixes: e3a79e0e878 ("target/i386: Enable TARGET_TB_PCREL", 2022-10-11)
Cc: qemu-stable@nongnu.org
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1759
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1964
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2012
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 729ba8e933f8af5800c3a92b37e630e9bdaa9f1e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The PCREL patches introduced a bug when updating EIP in the !CF_PCREL case.
Using s->pc in func gen_update_eip_next() solves the problem.
Cc: qemu-stable@nongnu.org
Fixes: b5e0d5d22fbf ("target/i386: Fix 32-bit wrapping of pc/eip computation")
Signed-off-by: guoguangyao <guoguangyao18@mails.ucas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240115020804.30272-1-guoguangyao18@mails.ucas.ac.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2926eab8969908bc068629e973062a0fb6ff3759)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With PCREL, we have a page-relative view of EIP, and an
approximation of PC = EIP+CSBASE that is good enough to
detect page crossings. If we try to recompute PC after
masking EIP, we will mess up that approximation and write
a corrupt value to EIP.
We already handled masking properly for PCREL, so the
fix in b5e0d5d2 was only needed for the !PCREL path.
Cc: qemu-stable@nongnu.org
Fixes: b5e0d5d22fbf ("target/i386: Fix 32-bit wrapping of pc/eip computation")
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240101230617.129349-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a58506b748b8988a95f4fa1a2420ac5c17038b30)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
j is used while loading an ELF file to byteswap segments'
data. If data is larger than 2GB an overflow may happen.
So j should be elf_word.
This commit fixes a minor bug: it's unlikely anybody is trying to
load ELF files with 2GB+ segments for wrong-endianness targets,
but if they did, it wouldn't work correctly.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 7ef295ea5b ("loader: Add data swap option to load-elf")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 410c2a4d75f52f6a2fe978eda5a9b6f854afe5ea)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Put correct values (depending on CPU arch) into IOR and ISR on fault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 31efbe72c6cc54b9cbc2505d78870a8a87a8d392)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Put correct values (depending on CPU arch) into IOR and ISR on fault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 910ada0225d17530188aa45afcb9412c17267f46)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move functionality to set IOR and ISR on fault into own
function. This will be used by follow-up patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 3824e0d643f34ee09e0cc75190c0c4b60928b78c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The value of unwind_breg may reference register %r0, but we need to avoid
accessing gr0 directly and use the value 0 instead.
At runtime I've seen unwind_breg being zero with the Linux kernel when
rfi is used to jump to smp_callin().
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bruno Haible <bruno@clisp.org>
(cherry picked from commit 5915b67013eb8c3a84e3ef05e6ba4eae55ccd173)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The various operating systems (e.g. Linux, NetBSD) have issues
mapping the power button when it's stored in page zero.
NetBSD even crashes, because it fails to map that page and then
accesses unmapped memory.
Since we now have a consistent memory mapping of PDC in 32-bit
and 64-bit address space (the lower 32-bits of the address are in
sync) the power button can be moved back to PDC space.
This patch fixes the power button on Linux, NetBSD and HP-UX.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit ed35afcb331a972210816435d6b1b5de17fc7d4f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix the address translation for PDC space on PA2.0 if PSW.W=0.
Basically, for any address in the 32-bit PDC range from 0xf0000000 to
0xf1000000 keep the lower 32-bits and just set the upper 32-bits to
0xfffffff0.
This mapping fixes the emulated power button in PDC space for 32- and
64-bit machines and is how the physical C3700 machine seems to map
PDC.
Figures H-10 and H-11 in the parisc2.0 spec [1] show that the 32-bit
region will be mapped somewhere into a higher and bigger 64-bit PDC
space. The start and end of this 64-bit space is defined by the
physical address bits. But the figures don't specifiy where exactly the
mapping will start inside that region. Tests on a real HP C3700
regarding the address of the power button indicate, that the lower
32-bits will stay the same though.
[1] https://parisc.wiki.kernel.org/images-parisc/7/73/Parisc2.0.pdf
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 6ce18d530638f6e4eb87ef8737c634e34362ad2b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
NetBSD accesses some astro and elroy registers which aren't accessed
by Linux yet. Add emulation for those registers to allow NetBSD to
boot further.
Please note that this patch is not sufficient to completely boot up
NetBSD on the 64-bit C3700 machine yet.
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Bruno Haible <bruno@clisp.org>
(cherry picked from commit 3b57c15f02050227c5c73ca97fa0dfc02f154fe9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recognize the qemu --nodefaults option, which will disable the
following default devices on hppa:
- lsi53c895a SCSI controller,
- artist graphics card,
- LASI 82596 NIC,
- tulip PCI NIC,
- second serial PCI card,
- USB OHCI controller.
Adding this option is very useful to allow manual testing and
debugging of the other possible devices on the command line.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit d8a3220005d74512677b181e3a32cd94b13ddf49)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The physical hardware allows DIMMs of 4 MB size and above, allowing up
to 3840 MB of memory, but is restricted by setup code to 3 GB.
Increase the limit to allow up to the maximum amount of memory.
Btw. the memory area from 0xf000.0000 to 0xffff.ffff is reserved by
the architecture for firmware and I/O memory and can not be used for
standard memory.
An upcoming 64-bit SeaBIOS-hppa firmware will allow more than 3.75GB
on 64-bit HPPA64. In this case the ram_max for the pa20 case will change.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Nelson H. F. Beebe <beebe@math.utah.edu>
Fixes: b7746b1194c8 ("hw/hppa/machine: Restrict the total memory size to 3GB")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bruno Haible <bruno@clisp.org>
(cherry picked from commit 92039f61af89629f268e04255946c2a3fa0c453f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is now expected by rtd so I've expanded using their example as
22.04 is one of our supported platforms. I tried to work out if there
was an easy way to re-generate a requirements.txt from our
pythondeps.toml but in the end went for the easier solution.
Cc: <qemu-stable@nongnu.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231221174200.2693694-1-alex.bennee@linaro.org>
(cherry picked from commit b16a45bc5e0e329a16af8a2e020a6e7044f9afa2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sometimes the CI "pages" job fails with a message like this from
htags:
$ htags -anT --tree-view=filetree -m qemu_init -t "Welcome to the QEMU sourcecode"
htags: Negative exec line limit = -371
This is due to a bug in hflags where if the environment is too large it
falls over:
https://lists.gnu.org/archive/html/bug-global/2024-01/msg00000.html
This happens to us because GitLab CI puts the commit message of the
commit under test into the CI_COMMIT_MESSAGE and/or CI_COMMIT_TAG_MESSAGE
environment variables, so the job will fail if the commit happens to
have a verbose commit message.
Work around the htags bug by unsetting these variables while running
htags.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2080
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240111125543.1573473-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 52a21689cd829c1cc931b59b5ee5bdb10dd578c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
LAE should set the access register corresponding to the first operand,
instead, it always modifies access register 1.
Co-developed-by: Ido Plat <Ido.Plat@ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: a1c7610a6879 ("target-s390x: implement LAY and LAEY instructions")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240111092328.929421-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e358a25a97c71c39e3513d9b869cdb82052e50b8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
An apparent copy-paste error tests for the presence of the
virtio-rng-ccw device in order to perform tests on the virtio-scsi-ccw
device.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Message-ID: <20240106130121.1244993-1-sam@rfc1149.net>
Fixes: 65331bf5d1 ("tests/qtest: Check for virtio-ccw devices before using them")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit c98873ee4a0c2694aac976ab9affcf55da8b7e61)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use PPC_FEATURE2_ISEL and PPC_FEATURE2_VEC_CRYPTO from linux headers
instead of the GNU specific PPC_FEATURE2_HAS_ISEL and
PPC_FEATURE2_HAS_VEC_CRYPTO. This fixes build with musl libc.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1861
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Fixes: 63922f467a ("tcg/ppc: Replace HAVE_ISEL macro with a variable")
Fixes: 68f340d4cd ("tcg/ppc: Enable Altivec detection")
Message-Id: <20231219105236.7059-1-ncopa@alpinelinux.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 1d513e06d96697f44de4a1b85c6ff627c443e306)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
LQ has a constraint that RTp != RA, else SIGILL.
Therefore, force the destination of INDEX_op_qemu_*_ld128 to be a
new register pair, so that it cannot overlap the input address.
This requires new support in process_op_defs and tcg_reg_alloc_op.
Cc: qemu-stable@nongnu.org
Fixes: 526cd4ec01f ("tcg/ppc: Support 128-bit load/store")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240102013456.131846-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit ca5bed07d0e7e0530c2cafbc134c4f74e582ac50)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The hypervisor can deliver (virtual) LPIs to a guest by setting up a
list register to have an intid which is an LPI. The GIC has to treat
these a little differently to standard interrupt IDs, because LPIs
have no Active state, and so the guest will only EOI them, it will
not also deactivate them. So icv_eoir_write() must do two things:
* if the LPI ID is not in any list register, we drop the
priority but do not increment the EOI count
* if the LPI ID is in a list register, we immediately deactivate
it, regardless of the split-drop-and-deactivate control
This can be seen in the VirtualWriteEOIR0() and VirtualWriteEOIR1()
pseudocode in the GICv3 architecture specification.
Without this fix, potentially a hypervisor guest might stall because
LPIs get stuck in a bogus Active+Pending state.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
(cherry picked from commit 82a65e3188abebb509510b391726711606aca642)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
introduced a global VFIODevice list, but forgot to update the list
element field name when iterating over the new list. Change the code
to use the correct list element field.
Fixes: 3d779abafe ("vfio/common: Introduce a global VFIODevice list")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2061
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
(cherry picked from commit 9353b6da430f90e47f352dbf6dc31120c8914da6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_path_get_basename() is a portable utility function that has the
advantage of not modifing the string argument. It also fixes a compile
breakage with the Musl C library reported in [1].
[1] https://lore.kernel.org/all/20231212010228.2701544-1-raj.khem@gmail.com/
Reported-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit 213ae3ffda463c0503e39e0cf827511b5298c314)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The edu_check_range function checks that start <= end1 < end2, where
end1 is the upper bound (exclusive) of the guest-supplied DMA range and
end2 is the upper bound (exclusive) of the device's allowed DMA range.
When the guest tries to transfer exactly DMA_SIZE (4096) bytes, end1
will be equal to end2, so the check fails and QEMU aborts with this
puzzling error message (newlines added for formatting):
qemu: hardware error: EDU: DMA range
0x0000000000040000-0x0000000000040fff out of bounds
(0x0000000000040000-0x0000000000040fff)!
By checking end1 <= end2 instead, guests will be allowed to transfer
exactly 4096 bytes. It is not necessary to explicitly check for
start <= end1 because the previous two checks (within(addr, start, end2)
and end1 > addr) imply start < end1.
Fixes: b30934cb52a7 ("hw: misc, add educational driver", 2015-01-21)
Signed-off-by: Max Erenberg <merenber@uwaterloo.ca>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2c5107e1b455d4a157124f021826ead4e04b4aea)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing upstream U-Boot with 'sifive_u' machine we see:
=> dhcp
ethernet@10090000: PHY present at 0
Could not get PHY for ethernet@10090000: addr 0
phy_connect failed
This has been working till QEMU 8.1 but broken since QEMU 8.2.
Fixes: 1b09eeb122aa ("hw/net/cadence_gem: use FIELD to describe PHYMNTNC register fields")
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 0c7ffc977195c1f71c8132eb5616827e589d4a0f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
error_setg() appends newline to the formatted message.
Fixes: cb94ff5f80c5 ("audio: propagate Error * out of audio_init")
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 09a36158c283f7448d1b00fdbb6634f05d27f922)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Current error message:
qemu-system-x86_64: -chardev spice,id=foo: Parameter 'driver' expects an abstract device type
while in fact the meaning is in reverse, -chardev expects
a non-abstract device type.
Fixes: 777357d758d9 ("chardev: qom-ify" 2016-12-07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
(cherry picked from commit 4ad87cd4b2254197b7ac12e3da824854e6a90f8f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mcycle/minstret counter's stop flag is mistakenly updated on a copy
on stack. Thus the counter increments even when the CY/IR bit in the
mcountinhibit register is set. This commit corrects its behavior.
Fixes: 3780e33732f88 (target/riscv: Support mcycle/minstret write operation)
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 5cb0e7abe1635cb82e0033260dac2b910d142f8c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A CAN sja1000 standard frame filter mask has been computed and applied
incorrectly for standard frames when single Acceptance Filter Mode
(MOD_AFM = 1) has been selected. The problem has not been found
by Linux kernel testing because it uses dual filter mode (MOD_AFM = 0)
and leaves falters fully open.
The problem has been noticed by Grant Ramsay when testing with Zephyr
RTOS which uses single filter mode.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reported-by: Grant Ramsay <gramsay@enphaseenergy.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2028
Fixes: 733210e754 ("hw/net/can: SJA1000 chip register level emulation")
Message-ID: <20240103231426.5685-1-pisa@fel.cvut.cz>
(cherry picked from commit 25145a7d7735344a469551946fc2a7f19eb4aa3d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The sgx_epc_get_section stub is reachable from cpu_x86_cpuid. It
should not assert, instead it should just return true just like
the "real" sgx_epc_get_section does when SGX is disabled.
Reported-by: Vladimír Beneš <vbenes@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20220201190941.106001-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 219615740425d9683588207b40a365e6741691a6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit c2118e9e1ab ("configure: don't try a "native" cross for linux-user",
2023-11-23) sought to avoid issues with using the native compiler with a
cross-endian or cross-bitness setup. However, in doing so it ended up
requiring a cross compiler setup (and most likely a slow compiler setup)
even when building TCG tests that are native to the host architecture.
Always allow the host compiler in that case.
Cc: qemu-stable@nongnu.org
Fixes: c2118e9e1ab ("configure: don't try a "native" cross for linux-user", 2023-11-23)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 007531586aa8ef6dccdadd927b89a50af62288d1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
strerrorname_np is non-portable and breaks building with musl libc.
Use strerror(errno) instead, like we do other places.
Cc: qemu-stable@nongnu.org
Fixes: commit 082e9e4a58ba (target/riscv/kvm: improve 'init_multiext_cfg' error msg)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2041
Buglink: https://gitlab.alpinelinux.org/alpine/aports/-/issues/15541
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit d424db235434b8356c6b2d9420b846c7ddcc83ea)
We have a few test cases that include tests for corner case aspects of
internal snapshots, but nothing that tests that they actually function
as snapshots or that involves deleting a snapshot. Add a test for this
kind of basic internal snapshot functionality.
The error cases include a regression test for the crash we just fixed
with snapshot operations on inactive images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit bb6e2511eb48539b7dcbcb5f47772e156b9c45d1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, the conflict between -incoming and -loadvm is only detected
when loading the snapshot fails because the image is still inactive for
the incoming migration. This results in a suboptimal error message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Catch the situation already in qemu_validate_options() to improve the
message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: 'incoming' and 'loadvm' options are mutually exclusive
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5a7f21efaf99c60614fe1967be1c0f9aa46c526e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
bdrv_is_read_only() only checks if the node is configured to be
read-only eventually, but even if it returns false, writing to the node
may not be permitted at the moment (because it's inactive).
bdrv_is_writable() checks that the node can be written to right now, and
this is what the snapshot operations really need.
Change bdrv_can_snapshot() to use bdrv_is_writable() to fix crashes like
the following:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: ../block/io.c:1990: int bdrv_co_write_req_prepare(BdrvChild *, int64_t, int64_t, BdrvTrackedRequest *, int): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
The resulting error message after this patch isn't perfect yet, but at
least it doesn't crash any more:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d3007d348adaaf04ee8b099a475282034a662414)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reduce atomicity while emitting opcodes, instead of later
during code generation. This ensures that any helper called
also sees the reduced atomicity requirement.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2034
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231212193542.149117-1-richard.henderson@linaro.org>
In 32-bit mode, pc = eip + cs_base is also 32-bit, and must wrap.
Failure to do so results in incorrect memory exceptions to the guest.
Before 732d548732ed, this was implicitly done via truncation to
target_ulong but only in qemu-system-i386, not qemu-system-x86_64.
To fix this, we must add conditional zero-extensions.
Since we have to test for 32 vs 64-bit anyway, note that cs_base
is always zero in 64-bit mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2022
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231212172510.103305-1-richard.henderson@linaro.org>
