Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st
into one function that returns HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Collect the 3 potential parts of the host address into a struct.
Reorg tcg_out_qemu_{ld,st}_direct to use it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename the 'ext' parameter 'data_type' to make the use clearer;
pass it to tcg_out_qemu_st as well to even out the interfaces.
Rename the 'otype' local 'addr_type' to make the use clearer.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type truncation. For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
'offset' should be bits [23:5] of LDR instruction, rather than [4:0].
Fixes: d59d83a1c3 ("tcg/aarch64: Reorg goto_tb implementation")
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.
Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The old implementation replaces two insns, swapping between
b <dest>
nop
br x30
and
adrp x30, <dest>
addi x30, x30, lo12:<dest>
br x30
There is a race condition in which a thread could be stopped at
the PC of the second insn, and when restarted does not see the
complete address computation and branches to nowhere.
The new implemetation replaces only one insn, swapping between
b <dest>
br tmp
and
ldr tmp, <jmp_addr>
br tmp
Reported-by: hev <r@hev.cc>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Move any assert for
TCG_TARGET_HAS_direct_jump into the new function (which now cannot
be build-time). Will be unused if TCG_TARGET_HAS_direct_jump is
constant 0, but we can't test for constant in the preprocessor,
so just mark it G_GNUC_UNUSED.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one use, and BLR is perhaps even more
self-documentary than CALLR.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hppa host code has been removed since 2013; this
should have been deleted at the same time.
Fixes: 802b508123 ("tcg-hppa: Remove tcg backend")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AArch64 defines the TCG_TARGET_HAS_direct_jump. So the "else" block is
useless in the case of "INDEX_op_goto_tb" in function "tcg_out_op". Add
an assertion and delete these codes for clarity.
Suggested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221017020826.990729-1-huqi@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The masking in tcg_out_shl was incorrect, producing an
illegal instruction, rather than merely unspecified results
for the out-of-range shift.
Tested-by: Joel Stanley <joel@jms.id.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1051
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typo used only 'ul' suffix, which is still 32-bits for windows host.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/947
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We've had placeholders for these opcodes for a while,
and should have support on ppc, s390x and avx512 hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 6eea04347e, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory bswap support in the aarch64 backend merely dates from
a time when it was required. There is nothing special about the
backend support that could not have been provided by the middle-end
even prior to the introduction of the bswap flags.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass in the input and output size. We currently use 3 of the 5
possible combinations; the others may be used by new tcg opcodes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the ifdef ladder and move each define into the
appropriate header file.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last argument of tcg_out_extr() must be in the range 0-31 if ext==0.
Before the fix, when m==0 it becomes 32 and it crashes with an Illegal
instruction on Apple Silicon. After the fix, it will be 0. If m is in
the range 1-31, it is the same as before.
Signed-off-by: Yasuo Kuwahara <kwhr00@gmail.com>
Message-Id: <CAHfJ0vSXnmnTLmT0kR=a8ACRdw_UsLYOhStzUzgVEHoH8U-7sA@mail.gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are two different versions of prototype for tcg_out_op and
tcg_out_vec_op functions:
1) using const TCGArg *args and const int *const_args arguments
2) using const TCGArg args[TCG_MAX_OP_ARGS] and const int
const_args[TCG_MAX_OP_ARGS] aguments.
This duality causes warnings on GCC 11 and prevents build using
--enable-werror. As second version provides more information,
unify functions prototypes to this variant.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210312121418.139093-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
