The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
Test execution of DC CVAP and DC CVADP instructions under user mode
emulation.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have many other instances of stg in the testsuite;
change these to provide an instance of stz2g.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Running every plugin with every test is getting excessive as well as
not really improving coverage that much. Restrict the plugin tests to
just the MULTIARCH_TESTS which are shared between most architecture
for both system and user-mode. For those that aren't we need to squash
MULTIARCH_TESTS so we don't add them when they are not part of the
TESTS global.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230424092249.58552-14-alex.bennee@linaro.org>
Currently when we encounter a gdb that is old or not built with
multiarch in mind we fail rather messily. Try and improve the
situation by probing ahead of time and setting
HOST_GDB_SUPPORTS_ARCH=y in the relevant tcg configs. We can then skip
and give a more meaningful message if we don't run the test.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-24-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-24-richard.henderson@linaro.org>
This will be helpful in debugging problems with tracking SVE memory
accesses via the TCG plugins system.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20230124180127.1881110-26-alex.bennee@linaro.org>
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed. This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.
Specifically, the following new ID registers/fields are exposed to
userspace:
ID_AA64PFR1_EL1.BT: bits 3-0
ID_AA64PFR1_EL1.MTE: bits 11-8
ID_AA64PFR1_EL1.SME: bits 27-24
ID_AA64ZFR0_EL1.SVEver: bits 3-0
ID_AA64ZFR0_EL1.AES: bits 7-4
ID_AA64ZFR0_EL1.BitPerm: bits 19-16
ID_AA64ZFR0_EL1.BF16: bits 23-20
ID_AA64ZFR0_EL1.SHA3: bits 35-32
ID_AA64ZFR0_EL1.SM4: bits 43-40
ID_AA64ZFR0_EL1.I8MM: bits 47-44
ID_AA64ZFR0_EL1.F32MM: bits 55-52
ID_AA64ZFR0_EL1.F64MM: bits 59-56
ID_AA64SMFR0_EL1.F32F32: bit 32
ID_AA64SMFR0_EL1.B16F32: bit 34
ID_AA64SMFR0_EL1.F16F32: bit 35
ID_AA64SMFR0_EL1.I8I32: bits 39-36
ID_AA64SMFR0_EL1.F64F64: bit 48
ID_AA64SMFR0_EL1.I16I64: bits 55-52
ID_AA64SMFR0_EL1.FA64: bit 63
ID_AA64MMFR0_EL1.ECV: bits 63-60
ID_AA64MMFR1_EL1.AFP: bits 47-44
ID_AA64MMFR2_EL1.AT: bits 35-32
ID_AA64ISAR0_EL1.RNDR: bits 63-60
ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16: bits 47-44
ID_AA64ISAR1_EL1.DGH: bits 51-48
ID_AA64ISAR1_EL1.I8MM: bits 55-52
ID_AA64ISAR2_EL1.WFxT: bits 3-0
ID_AA64ISAR2_EL1.RPRES: bits 7-4
ID_AA64ISAR2_EL1.GPA3: bits 11-8
ID_AA64ISAR2_EL1.APA3: bits 15-12
The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.
The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.
Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
Almost all invocations of run-test have either "$* on $(TARGET_NAME)"
or "$< on $(TARGET_NAME)" as the last argument. So provide a default
test name, while allowing an escape hatch for custom names.
As an additional simplification, remove the need to do shell quoting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-24-alex.bennee@linaro.org>
System emulation tests do not run in a hosted environment, since they
do not link with libc. They should only use freestanding headers
(float.h, limits.h, stdarg.h, stddef.h, stdbool.h, stdint.h,
stdalign.h, stdnoreturn.h) and should be compiled with -ffreestanding
in order to use the compiler implementation of those headers
rather than the one in libc.
Some tests are using inttypes.h instead of stdint.h, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This controls whether the PACI{A,B}SP instructions trap with BTYPE=3
(indirect branch from register other than x16/x17). The linux kernel
sets this in bti_enable().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/998
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220427042312.294300-1-richard.henderson@linaro.org
[PMM: remove stray change to makefile comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a simple transliteration of the float_convs test but this time
working with doubles. I'm used it to test the handling of vector
registers in gdbstub but wasn't able to find a non-ugly way to
automate it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-23-alex.bennee@linaro.org>
Even for container-based cross compilation use $(CROSS_CC_HAS_*) variables.
This makes the TCG test makefiles oblivious of whether the compiler is
invoked through a container or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-13-alex.bennee@linaro.org>
For both ldnt1 and stnt1, the meaning of the Rn and Rm are different
from ld1 and st1: the vector and integer registers are reversed, and
the integer register 31 refers to XZR instead of SP.
Secondly, the 64-bit version of ldnt1 was being interpreted as
32-bit unpacked unscaled offset instead of 64-bit unscaled offset,
which discarded the upper 32 bits of the address coming from
the vector argument.
Thirdly, validate that the memory element size is in range for the
vector element size for ldnt1. For ld1, we do this via independent
decode patterns, but for ldnt1 we need to do it manually.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220308031655.240710-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to check our new SYS_HEAPINFO implementation generates
sane values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220225172021.3493923-19-alex.bennee@linaro.org>
The aim of this is to test code generation for vectorised operations.
Unfortunately gcc struggles to do much with the messy sha1 code (try
-fopt-info-vec-missed to see why). However it's better than nothing.
We assume the non-vectorised output is gold and baring compiler bugs
the outputs should match.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-12-alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test was off-by-one, because tag_last points to the
last byte of the tag to check, thus tag_last - prev_page
will equal TARGET_PAGE_SIZE when we use the first byte
of the next page.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/403
Reported-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210612195707.840217-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using mprotect() to change PROT_* does not change the MAP_ANON
previously set with mmap(). Our linux-user version of MTE only
works with MAP_ANON pages, so losing PAGE_ANON caused MTE to
stop working.
Reported-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.
Also clean-up a bit of the Makefile messing about to one common set of
runners.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were fudging TBI1 enabled to speed up the generated code.
Now that we've improved the code generation, remove this.
Also, tidy the comment to reflect the current code.
The pauth test was testing a kernel address (-1) and making
incorrect assumptions about TBI1; stick to userland addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
This adds a new tests that allows us to test softmmu only features
including watchpoints. To do achieve this we need to:
- add _exit: labels to the boot codes
- write a memory.py test case
- plumb the test case into the build system
- tweak the run_test script to:
- re-direct output when asked
- use socket based connection for all tests
- add a small pause before connection
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-6-alex.bennee@linaro.org>
The note test requires gcc 10 for -mbranch-protection=standard.
The mmap test uses PROT_BTI and does not require special compiler support.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of top_bit used in this function is one higher
than that used in the Arm ARM psuedo-code, which put the error
indication at top_bit - 1 at the wrong place, which meant that
it wasn't visible to Auth.
Fixing the definition of top_bit requires more changes, because
its most common use is for the count of bits in top_bit:bot_bit,
which would then need to be computed as top_bit - bot_bit + 1.
For now, prefer the minimal fix to the error indication alone.
Fixes: 63ff0ca94c
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200728195706.11087-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about the divergence from the pseudocode]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check-tcg plugins build was failing because some special case
tests that needed -cpu max failed because the plugin variant hadn't
carried across the QEMU_OPTS tweak.
Guests which globally set QEMU_OPTS=-cpu FOO where unaffected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200615141922.18829-3-alex.bennee@linaro.org>
If you jump back and forth between branches while developing plugins
you end up debugging failures caused by plugins left in the build
directory. Fix this by basing plugins on the source tree instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200615141922.18829-2-alex.bennee@linaro.org>
I'm not sure when this broke but we should use EXTRA_RUNS for
"virtual" tests which are not generated from the binary names.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-5-alex.bennee@linaro.org>
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
This test seems flaky and reports attachment even when we failed to
negotiate the architecture. However the fetching of the guest
architecture will fail tripping up the gdb AttributeError which will
trigger our early no error status exit from the test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-5-alex.bennee@linaro.org>
It seems older and non-multiarach aware GDBs might not fail gracefully
when faced with something they don't know. For example when faced with
a target XML for s390x the Ubuntu 18.04 gdb will generate an internal
fault and prompt for a core dump.
Work around this by invoking GDB in a more batch orientated way and
then trying to filter out between test failures and gdb failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-4-alex.bennee@linaro.org>
This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>
This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.
However we will also be able to use it in a future test which
exercises the GDB stub.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>
A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>
This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>
Make the output just a bit prettier when running by hand.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pointer authentication isn't perfect so measure the percentage of
failed checks. As we want to vary the pointer we work through a bunch
of different addresses.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-20-alex.bennee@linaro.org>
If we have plugins enabled we still need to have built the test to be
able to run it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-2-alex.bennee@linaro.org>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
Perform the set of operations and test described in LP 1859713.
Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the test vector from the QARMA paper, run through PACGA.
Suggested-by: Vincent Dehors <vincent.dehors@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.
Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are linux-user users of semihosting so we'd better check things
work for them as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We don't run this during check-tcg as we would need to check stuff is
echoed back. However we can still build the binary so people can test
it manually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.
There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.
Checking the results of the plugins is left for a later exercise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Otherwise clever expanders like the plugins test get unstuck.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
