The "msi-parent" property can be used on the PCI node when MSIs do not
contain sideband data (device IDs) [1]. In QEMU, MSI transactions
contain the requester ID, so the PCI node should use the "msi-map"
property instead of "msi-parent". In our case the property describes an
identity map between requester ID and sideband data.
This fixes a warning when passing the DTB generated by QEMU to dtc,
following a recent change to the GICv3 node:
Warning (msi_parent_property): /pcie@10000000:msi-parent: property size (4) too small for cell size 1
[1] linux/Documentation/devicetree/bindings/pci/pci-msi.txt
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv3 bindings requires a #msi-cells property for the ITS node. Fix
the corresponding dt-validate warning:
interrupt-controller@8000000: msi-controller@8080000: '#msi-cells' is a required property
From schema: linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The devicetree specification requires a 'model' property in the root
node. Fix the corresponding dt-validate warning:
/: 'model' is a required property
From schema: dtschema/schemas/root-node.yaml
Use the same name for model as for compatible. The specification
recommends that 'compatible' follows the format 'manufacturer,model' and
'model' follows the format 'manufacturer,model-number'. Since our
'compatible' doesn't observe this, 'model' doesn't really need to
either.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect ZynqMP's USB controllers.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On error, vfio_get_iommu_info() frees and clears *info, but
vfio_connect_container() continues to use the pointer regardless
of the return value. Restructure the code such that a failure
of this function triggers an error and clean up the remainder of
the function, including updating an outdated comment that had
drifted from its relevant line of code and using host page size
for a default for better compatibility on non-4KB systems.
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20220910004245.2878-1-nicolinc@nvidia.com/
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/166326219630.3388898.12882473157184946072.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The structure VFIOMigration of a VFIODevice is allocated and initialized
in vfio_migration_init(). "device_state" and "vm_running" are initialized
to 0, indicating that VFIO device is_STOP and VM is not-running. The
initialization value is incorrect. According to the agreement, default
state of VFIO device is _RUNNING. And if a VFIO device is hot-plugged
while the VM is running, "vm_running" should be 1. This patch fixes it.
Fixes: 02a7e71b1e ("vfio: Add VM state change handler to know state of VM")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20220711014651.1327-1-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make guest os access pci device control 2 reg for passthrough device
as struct XenPTRegInfo described in the file hw/xen/xen_pt.h.
/* reg read only field mask (ON:RO/ROS, OFF:other) */
uint32_t ro_mask;
/* reg emulate field mask (ON:emu, OFF:passthrough) */
uint32_t emu_mask;
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1196
Signed-off-by: Aaron Liu <Aaron.Liu@amd.com>
Signed-off-by: Ruili Ji <ruili.ji@amd.com>
Message-ID: <BL1PR12MB599341DC55BA53FE588DE14E9B7E9@BL1PR12MB5993.namprd12.prod.outlook.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
It was returned as error before. Instead of it, simply update the
corresponding field so qemu can send it in the migration data.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Like commit 034d00d485 ("e1000: set RX descriptor status in
a separate operation"), there is also same issue in e1000e, which
would cause lost packets or stop sending packets to VM with DPDK.
Do similar fix in e1000e.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/402
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The scanout is currently updated only if the whole rect is inside the
scanout space. This is not a correct condition because the scanout should
be updated even a small area in the scanout space is covered by the rect.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220909014052.7297-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building QEMU with DEBUG_ATI defined then running with
'-device ati-vga,romfile="" -d unimp,guest_errors -trace ati\*'
we get:
ati_mm_write 4 0x16c0 DP_CNTL <- 0x1
ati_mm_write 4 0x146c DP_GUI_MASTER_CNTL <- 0x2
ati_mm_write 4 0x16c8 DP_MIX <- 0xff0000
ati_mm_write 4 0x16c4 DP_DATATYPE <- 0x2
ati_mm_write 4 0x224 CRTC_OFFSET <- 0x0
ati_mm_write 4 0x142c DST_PITCH_OFFSET <- 0xfe00000
ati_mm_write 4 0x1420 DST_Y <- 0x3fff
ati_mm_write 4 0x1410 DST_HEIGHT <- 0x3fff
ati_mm_write 4 0x1588 DST_WIDTH_X <- 0x3fff3fff
ati_2d_blt: vram:0x7fff5fa00000 addr:0 ds:0x7fff61273800 stride:2560 bpp:32 rop:0xff
ati_2d_blt: 0 0 0, 0 127 0, (0,0) -> (16383,16383) 16383x16383 > ^
ati_2d_blt: pixman_fill(dst:0x7fff5fa00000, stride:254, bpp:8, x:16383, y:16383, w:16383, h:16383, xor:0xff000000)
Thread 3 "qemu-system-i38" received signal SIGSEGV, Segmentation fault.
(gdb) bt
#0 0x00007ffff7f62ce0 in sse2_fill.lto_priv () at /lib64/libpixman-1.so.0
#1 0x00007ffff7f09278 in pixman_fill () at /lib64/libpixman-1.so.0
#2 0x0000555557b5a9af in ati_2d_blt (s=0x631000028800) at hw/display/ati_2d.c:196
#3 0x0000555557b4b5a2 in ati_mm_write (opaque=0x631000028800, addr=5512, data=1073692671, size=4) at hw/display/ati.c:843
#4 0x0000555558b90ec4 in memory_region_write_accessor (mr=0x631000039cc0, addr=5512, ..., size=4, ...) at softmmu/memory.c:492
Commit 584acf34cb ("ati-vga: Fix reverse bit blts") introduced
the local dst_x and dst_y which adjust the (x, y) coordinates
depending on the direction in the SRCCOPY ROP3 operation, but
forgot to address the same issue for the PATCOPY, BLACKNESS and
WHITENESS operations, which also call pixman_fill().
Fix that now by using the adjusted coordinates in the pixman_fill
call, and update the related debug printf().
Reported-by: Qiang Liu <qiangliu@zju.edu.cn>
Fixes: 584acf34cb ("ati-vga: Fix reverse bit blts")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Mauro Matteo Cascella <mcascell@redhat.com>
Message-Id: <20210906153103.1661195-1-philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The xHCI controller will ignore the endpoint MTU and so may deliver
packets of any length. Detect short packets as being any packet that
has a length of zero or a length that is not a multiple of the MTU.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-4-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB_CDC_SET_ETHERNET_PACKET_FILTER request is mandatory for
CDC-ECM devices. Accept this request, ignoring the actual filter
value (to match the existing behaviour for RNDIS).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-3-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usbnet_receive() does not currently wake up the USB endpoint, leading
to a dead RX datapath when used with a host controller such as xHCI
that relies on being woken up.
Fix by adding a call to usb_wakeup() at the end of usbnet_receive().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-2-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The abort() in xhci_find_stream() can be triggered via enabling the secondary
stream arrays by setting linear stream array (LSA) bit (in endpoint context) to
0. We may show warnings and drop this operation.
Fixes: 024426acc0 ("usb-xhci: usb3 streams")
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1192
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220904125926.2141607-1-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add handler for fatal errors. Moves device into error state where it
stops responding until the guest resets it.
Guest can send illegal requests where scsi command and usb packet
transfer directions are inconsistent. Use the new usb_msd_fatal_error()
function instead of assert() in that case.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220830063827.813053-3-kraxel@redhat.com>
Change ordering to avoid adding forward declarations in
following patches. Fix comment code style while being
at it. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220830063827.813053-2-kraxel@redhat.com>
Various tools, such as kexec-tools and m68k-bootinfo, expect each
bootinfo entry to be aligned to 4 bytes, not 2 bytes. So adjust the
padding to fill this out as such.
Also, break apart the padding additions from the other field length
additions, so that it's more clear why these magic numbers are being
added, and comment them too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220926113900.1256630-2-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On the OpenTitan hardware the resetvec is fixed at the start of ROM. In
QEMU we don't run the ROM code and instead just jump to the next stage.
This means we need to be a little more flexible about what the resetvec
is.
This patch allows us to set the resetvec from the command line with
something like this:
-global driver=riscv.lowrisc.ibex.soc,property=resetvec,value=0x20000400
This way as the next stage changes we can update the resetvec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220914101108.82571-4-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The resetvec for the OpenTitan machine ended up being set to an out of
date value, so let's fix that and bump it to the correct start address
(after the boot ROM)
Fixes: bf8803c64d "hw/riscv: opentitan: bump opentitan version"
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220914101108.82571-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Updates the `EVENT_ENABLE` register to offset `0x34` as per
OpenTitan spec [1].
[1] https://docs.opentitan.org/hw/ip/spi_host/doc/#Reg_event_enable
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220823061201.132342-5-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch fixes up minor typos in ibex_spi_host
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220823061201.132342-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The maximum supported store block length might be different depending
on whether the instruction is interpretively executed (firmware-reported
maximum) or handled via userspace intercept (host kernel API maximum).
Choose the best available value during group creation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-8-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use the reserved pool of simulated PCI groups to allow intercept
devices to have separate groups from interpreted devices as some group
values may be different. If we run out of simulated PCI groups, subsequent
intercept devices just get the default group.
Furthermore, if we encounter any PCI groups from hostdevs that are marked
as simulated, let's just assign them to the default group to avoid
conflicts between host simulated groups and our own simulated groups.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-7-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lack of MSI-X support is not an issue for interpreted passthrough
devices, so let's let these in. This will allow, for example, ISM
devices to be passed through -- but only when interpretation is
available and being used.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to fully support MSA_EXT_5, we have to support the SHA-512
special instructions. So implement those.
The implementation began as something TweetNacl-like, and then was
adjusted to be useful here. It's not very beautiful, but it is quite
short and compact, which is what we're going for.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ restructure, add missing exception, add comments, fixup CPU model ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220922153820.221811-1-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An abort happens in ohci_frame_boundary() when ohci->done is 0 [1].
``` c
static void ohci_frame_boundary(void *opaque)
{
// ...
if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) {
if (!ohci->done)
abort(); <----------------------------------------- [1]
```
This was reported in https://bugs.launchpad.net/qemu/+bug/1911216/,
https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg03613.html, and
https://gitlab.com/qemu-project/qemu/-/issues/545. I can still reproduce it with
the latest QEMU.
This happends due to crafted ED with putting ISO_TD at physical address 0.
Suppose ed->head & OHCI_DPTR_MASK is 0 [2], and we memset 0 to the phyiscal
memory from 0 to sizeof(ohci_iso_td). Then, starting_frame [3] and frame_count
[4] are both 0. As we can control the value of ohci->frame_number (0 to 0x1f,
suppose 1), we then control the value of relative_frame_number to be 1 [6]. The
control flow goes to [7] where ohci->done is 0. Have returned from
ohci_service_iso_td(), ohci_frame_boundary() will abort() [1].
``` c
static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed)
{
// ...
addr = ed->head & OHCI_DPTR_MASK; // <--------------------- [2]
if (ohci_read_iso_td(ohci, addr, &iso_td)) { // <-------- [3]
// ...
starting_frame = OHCI_BM(iso_td.flags, TD_SF); // <-------- [4]
frame_count = OHCI_BM(iso_td.flags, TD_FC); // <-------- [5]
relative_frame_number = USUB(ohci->frame_number, starting_frame);
// <-------- [6]
if (relative_frame_number < 0) {
return 1;
} else if (relative_frame_number > frame_count) {
// ...
ohci->done = addr; // <-------- [7]
// ...
}
```
As only (afaik) a guest root user can manipulate ED, TD and the physical memory,
this assertion failure is not a security bug.
The idea to fix this issue is to drop ohci_service_iso_td() if ed->head &
OHCI_DPTR_MASK is 0, which is similar to the drop operation for
ohci_service_ed_list() when head is 0. Probably, a similar issue is in
ohci_service_td(). I drop ohci_service_td() if ed->head & OHCI_DPTR_MASK is 0.
Fixes: 7bfe577702 ("OHCI USB isochronous transfers support (Arnon Gilboa)")
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/545
Buglink: https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg03613.html
Buglink: https://bugs.launchpad.net/qemu/+bug/1911216
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220826051557.119570-1-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a guest sets up bad descriptors, it could force QEMU to access
non-existing memory regions. Thus we should check the return value
of dma_memory_read/write() to make sure that these errors don't go
unnoticed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220817160016.49752-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The compiler isn't clever enough to figure 'width' is a constant,
so help it by using a definitions instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-10-peter.maydell@linaro.org
Use autofree heap allocation instead of variable-length array on
the stack. Replace the snprintf() call by g_strdup_printf().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-9-peter.maydell@linaro.org
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-8-peter.maydell@linaro.org
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org
The compiler isn't clever enough to figure 'min_buf_size'
is a constant, so help it by using a definitions instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-6-peter.maydell@linaro.org
The LAN9118 allows the guest to specify a level for both the TX and
RX FIFOs at which an interrupt will be generated. We implement the
RSFL_INT interrupt for the RX FIFO but are missing the handling of
the equivalent TSFL_INT for the TX FIFO. Add the missing test to set
the interrupt if the TX FIFO has exceeded the guest-specified level.
This flag is required for Micrium lan911x ethernet driver to work.
Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com>
[PMM: Tweaked commit message and comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status"
causes segmentation fault with following dumpstack:
#1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312
#2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63
#3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128
#4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150
#5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178
#6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421
#7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320
#8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0
#9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297
#10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320
#11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596
#12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734
#13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38
#14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47
Fixes: ebb6207502 ("hw/acpi: Add ACPI Generic Event Device Support")
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For consistency, function "update_rx_fifo()" should use the RX FIFO
register field names, not the TX FIFO ones, even if they refer to the
same bit positions in the register.
Signed-off-by: Anton Kochkov <anton.kochkov@proton.me>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20220817141754.2105981-1-anton.kochkov@proton.me
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1123
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This FDT node is part of the DT specification.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
